r/hackrf • • Jan 25 '24

Cannot enter hackrf mode….

Post image

Need some help. Ordered a hackrf portapack h2 off AliExpress and I can’t enter hackrf mode. Do you guys have any troubleshoots? Currently I don’t have a cpu w/ windows 10 I can access…. Any help is greatly appreciated!

FYI you guys might be seeing a lot more of my dumb questions in the near future, unless of course I need to return. I really hope not though because it’s an extremely solid unit.

1 Upvotes

31 comments sorted by

19

u/Mr_Ironmule Jan 25 '24

You are in the HackRF mode when you see that screen. The HackRF mode requires a computer interface to set and operate the HackRF. It needs a program like SDR# or SDR++ to connect to the HackRF and make it operational. You may want to read the documentation and manual for the Portapack and the HackRF to find all the capabilities of the device and maximize your fun. Good luck.

2

u/ThecretThauce Jan 25 '24

Dang, ok. I’m in the process of getting a thinkpad. Any recommendations?

3

u/Mr_Ironmule Jan 25 '24

You obviously have the Portapack installed. You can have all kinds of fun using just that without a computer. I encourage you to read the manuals that have the system requirements listed. But pretty much any recent model computer with a USB port will work. I run Windows but other swear by Linux. And a few use Mac and mini-computers. There are plenty of posts in this forum and others to search for more information. Also, lots of videos out there too. Good luck.

1

u/ThecretThauce Jan 25 '24

Ok, noted. Unfortunately the m portapack I bought from aliexpress did not come with a manual of any kind. So far I’ve found YouTube not as helpful as I would’ve imagined but I’m more of a read it as you go type of learner anyways. Thanks for your comment though

3

u/OkAdministration9151 Jan 25 '24 edited Jan 26 '24

If your running mayhem firmware which I suspect you will be if it’s from Ali express, then you can look at the mayhem manual

https://github.com/portapack-mayhem/mayhem-firmware/wiki

1

u/ThecretThauce Jan 26 '24

Thank you. Appreciate it!

2

u/[deleted] Jan 25 '24

You’ve purchased an advanced gadget which requires education, not a manual.

First off, realize what you’ve done.

You’ve purchased a cheap imitation of a HackRF from a third party, preloaded. It could literally be running anything, transmitting or receiving anything..

You purchased it from another country, and don’t know how to use it. Have you flashed a known-good image on it yet at least, or are you using a radio hacking device from an unknown supplier in another country with arbitrary code running on it?

I’m not trying to spread fear, only awareness.

1

u/Scared-Ad9661 Mar 08 '24

Can you please help me to identify true device from imitations ?

1

u/[deleted] Mar 08 '24

I would only purchase from a vendor listed on the GreatScottGadgets website as that is the source of the HackRF. If you want to compare the one you have to the schematics, you can find them here: https://github.com/greatscottgadgets/hackrf/tree/master/hardware/hackrf-one

A simple plan would look something like:

  1. Compare your device to the schematic and look for changes. Buy a new device if you find changes you can’t explain.

  2. Uninstall any batteries if you happen to have a battery-portapack version. Flash the latest HackRF firmware to the device.

  3. Take out batteries when not in use, if yours has batteries. My portapack does not, for instance.

6

u/DemonKingFukai Jan 25 '24

That is hackrf mode

0

u/ThecretThauce Jan 25 '24

Gotcha… just need a cpu, yeah?

3

u/OkAdministration9151 Jan 25 '24 edited Jan 25 '24

Not a CPU that’s the term for just the main processing chip that does the main grunt,, but some people understandably call the main computer ‘bix/case’ a cpu. Just call it a conputer. Anyway as mentioned you are already in hackrf mode, the portapack board itself has the havoc firmware installed and that in turn talks to the hackrf board directly, as if a computer was talking to it. I too had this same thought, I think you may be trying to get back to the original Hackrf one portapack firnware you might have seen on a tutorial or something, only way to do that would be to re flash the original firmware onto portapack but mayhem gives you a lot more functionality. Have you got an SD card inserted yet? Note a lot of the Chinese portapack clones will require you to recharge the cpld if you can capture and replay correctly as it seems to be a step that is missed on a lot of the preconfigured ones, it’s also worth noting if it came with mayhem pre installed but no as card, then you have to a) get an as card and b) add the conte to of the ‘copy to as card.zip’ on the mayhem GitHub asssets page for your release, basically download it and extract the contents of the zip directly to the SD card , otherwise half of it will not work, abd you can capture/replay etc . Sd card has to be high speed and also needs to be fat32 formatted. You will need a computer for that step too mind you. Good luck

1

u/ThecretThauce Jan 26 '24

Thank you for your comment…. Yes I’m realizing my limitations without a PC. Will be getting one soon.

1

u/DemonKingFukai Jan 26 '24

Yes, hackrf mode is for connecting to a computer over usb.

3

u/Stayofexecution Jan 27 '24

Don’t worry OP, I also thought wtf is this when I entered “hackrf mode” mode for the first time. Lol. I quickly realized this must be where you connect the SDR to your computer only because I have other SDR dongles that I use with SDR #. :)

That blue screen should really have more info on it. Something like “You are now ready to connect to your computer, dummy.”

1

u/ThecretThauce Jan 27 '24

Lol, right. Yeah now I just need to get a PC. I have a MacBook but I think I’m limited on what I can do with that.

2

u/ThecretThauce Jan 25 '24

Sorry, fyi this is the screen that I get after trying to enter hackrf mode. It stays on this screen and does not change.

2

u/Nibb31 Jan 25 '24

That is HackRF mode. The other mode is when you control it through the Portapack.

0

u/ThecretThauce Jan 25 '24

Ok, thank you.. How do you access the “other mode”?

2

u/OkAdministration9151 Jan 25 '24

Other mode is just the normal mayhem screen when it fist comes on and before you click the hackrf button you pressed to get to that hackrf screen shown in your photo

2

u/OkAdministration9151 Jan 25 '24

So normal mode where you operate the hack rf through the portapack without a of is the mode it’s in when it first comes on, and you see the capture replay transmit buttons etc. the the secondary mode is hackrf mode where you have to plug it into a pc and use software on the pc to manipulate the hsckrf instead of the portapack (the mode your in on the pic)

1

u/ThecretThauce Jan 26 '24

Gotcha. Yeah I’m lookin at Thinkpads. I’ve been meaning to get the hackrf for awhile so I’m realizing the limitations of the device without a pc.

1

u/OkAdministration9151 Jan 26 '24

What is it your trying to do? You can do most things the hackrf without a pc. I’ve only really had it plugged into my pc when updating firmware or cpld

1

u/opiuminspection Jan 26 '24

press the reset button, it'll boot back into Portapack mode

1

u/ThecretThauce Jan 26 '24

When I press it it doesn’t do anything. Same if I hold it down

1

u/opiuminspection Jan 26 '24

you make need to reboot the drivers

the hackrf documentation has a section of which buttons to press while booting to reboot the LCD drivers

2

u/r0rsch4ch Jan 25 '24

What other mode?

2

u/jakhamm3r22 Jan 26 '24

Double press the wheel to turn it off and then press it once again to turn it back on. This will take you back to the main screen of the portapack. FYI if you are trying to transmit you’ll need to update the cpld firmware (requires a computer, google for instructions) - I ran into this problem with my hackrf from AliExpress and it took me forever to figure out why it wasn’t transmitting correctly.

1

u/ThecretThauce Jan 26 '24

No plans to transmit on it yet but thank you! I will keep this in mind.