r/gzcl • • Feb 03 '20

Resource: Guide to expanding GZCLP for novices

555 Upvotes

So I really enjoy giving back to this community but holy smokes there are a lot of directionless people out there asking for T2/T3 selection advice and then the wonky programs they come up with typically have a few of the same flaws so I would rather take a blanket-approach instead of the frequent one-on-one suggestions.

This post aims to be a resource to guide novices when they want to expand from the base GZCLP program of one movement, per tier, per session.

-----

Let's start with the base program:

A1

T1: Squat, 5 sets of 3, last set AMRAP

T2: Bench, 3 sets of 10, no AMRAP

T3: Lat Pulldown, 3 sets of 15, last set AMRAP

B1

T1: OHP, 5 sets of 3, last set AMRAP

T2: Deadlift, 3 sets of 10, no AMRAP

T3: DB Row, 3 sets of 15, last set AMRAP

A2

T1: Bench, 5 sets of 3, last set AMRAP

T2: Squat, 3 sets of 10, no AMRAP

T3: Lat Pulldown, 3 sets of 15, last set AMRAP

B2

T1: Deadlift, 5 sets of 3, last set AMRAP

T2: OHP, 3 sets of 10, no AMRAP

T3: DB Row, 3 sets of 15, last set AMRAP

From here, it is recommended to add T3 movements prior to adding T2 movements. I recommend doing so slowly, always one round of T3s at a time and I further suggest to do so at a rate of one set per week (Example: Wk 1: one set of a new T3, Wk 2: two sets of that T3, Wk 3: three sets of that T3, Wk 4: three sets of that T3, but with the AMRAP).

-----

So how should one decide what the next T3 should be? There are three competing goals that you should be considering when selecting a new T3:

- You could add a T3 that supplements a main lift

- You could add a T3 that works a prehab-type muscle

- You could add a T3 that targets a muscle for an aesthetic goal or a lagging muscle

Obviously, everyone will organize the priority of these goals a bit differently, but I think the order above is also in order of general importance. Let's dissect each of these a bit further.

Additional T3 movement as a supplement for a main lift

In order to choose which muscles to target, we need to first know which muscles are involved most in the four main movements (squat, overhead, bench, deadlift).

- For the squat, the primary and secondary movers are the quadriceps and the glutes.

- For the overhead, the primary and secondary movers are the anterior deltoids and the triceps.

- For the bench, the primary and secondary movers are the pectorals and the triceps.

- For the deadlift, the primary and secondary movers are the hamstrings and the glutes.

So then, you could target these muscles in the T3 range and it should carry over to your main lifts, enabling you to progress further. Remember that the T3 range should be filled primarily with isolation movements instead of compound movements.

Quadriceps can be isolated with Leg Extensions, Anterior Deltoids can be isolated with DB Front Raises (thumbs up, slightly bent elbows), Pectorals can be isolated with Cable Crossovers, Hamstrings can be isolated with Leg Curls.

Note that the secondary movers -- triceps and glutes -- get ~double the work from these compounds than the primary movers (both bench and overhead use the triceps ; both squat and deadlift use the glutes). For this reason, it's suggested to start with the primary movers first and instead isolate these secondary movers if they become a weak point later. You'll learn much more about your individual weak points later when you start stalling to progress on the main lifts.

Using this information we could add a round of four new T3s:

A1

T1: Squat, 5 sets of 3, last set AMRAP

T2: Bench, 3 sets of 10, no AMRAP

T3: Lat Pulldown, 3 sets of 15, last set AMRAP

T3B: Leg Extension, 3 sets of 15, last set AMRAP

B1

T1: OHP, 5 sets of 3, last set AMRAP

T2: Deadlift, 3 sets of 10, no AMRAP

T3: DB Row, 3 sets of 15, last set AMRAP

T3B: DB Front Raise, 3 sets of 15, last set AMRAP

A2

T1: Bench, 5 sets of 3, last set AMRAP

T2: Squat, 3 sets of 10, no AMRAP

T3: Lat Pulldown, 3 sets of 15, last set AMRAP

T3B: Cable Crossover, 3 sets of 15, last set AMRAP

B2

T1: Deadlift, 5 sets of 3, last set AMRAP

T2: OHP, 3 sets of 10, no AMRAP

T3: DB Row, 3 sets of 15, last set AMRAP

T3B: Leg Curl, 3 sets of 15, last set AMRAP

Additional T3 movement as prehab

Weight lifters have a few notoriously under-worked muscles since we focus most on functional strength and on aesthetic goals. In order to not leave those muscles behind, it is good practice to include some sorts of prehabilitation movements that combat these muscle imbalances, especially if you plan to lift for any extended period of time.

Some of the most commonly under-worked muscles are: the posterior deltoid, the rotator cuff group, the hip abductors, and the hip adductors. Both the posterior deltoid AND the rotator cuff group can be targeted with Face Pulls and Supinated Band Pull Aparts. The hip ab/adductors can be targeted with either bands or the machine of the same name.

Using this information we could add a round of four new T3s:

A1

T1: Squat, 5 sets of 3, last set AMRAP

T2: Bench, 3 sets of 10, no AMRAP

T3: Lat Pulldown, 3 sets of 15, last set AMRAP

T3B: Leg Extension, 3 sets of 15, last set AMRAP

T3C: Face Pull, 3 sets of 15, last set AMRAP

B1

T1: OHP, 5 sets of 3, last set AMRAP

T2: Deadlift, 3 sets of 10, no AMRAP

T3: DB Row, 3 sets of 15, last set AMRAP

T3B: DB Front Raise, 3 sets of 15, last set AMRAP

T3C: Leg Adduction, 3 sets of 15, last set AMRAP

A2

T1: Bench, 5 sets of 3, last set AMRAP

T2: Squat, 3 sets of 10, no AMRAP

T3: Lat Pulldown, 3 sets of 15, last set AMRAP

T3B: Cable Crossover, 3 sets of 15, last set AMRAP

T3C: Leg Abduction, 3 sets of 15, last set AMRAP

B2

T1: Deadlift, 5 sets of 3, last set AMRAP

T2: OHP, 3 sets of 10, no AMRAP

T3: DB Row, 3 sets of 15, last set AMRAP

T3B: Leg Curl, 3 sets of 15, last set AMRAP

T3C: Supinated Band Pull Apart, 3 sets of 15, last set AMRAP

Additional T3 movement for aesthetic goals/lagging muscles

Everyone has different muscular balances so it is a very individual thing to select T3s based off of lagging muscles, but people's idea of the ideal body shape varies less so from person to person.

Being extremely general and in no particular order, both men and women usually want: 1) Big lats, 2) Big shoulders, 3) Big arms, 4) Defined core, 5) Big, shapely rear.

- Lats are hit well by those daily pulls (DB Row and Lat Pulldown) so don't cut those out of your program! If anything you should expand this as you get more and more experienced.

- Shoulders are made of three components: Anterior Deltoid, Lateral Head, and Posterior Deltoid (colloquially referred to as front, middle, and rear). If you followed the above advice first, you are now working the front and rear delt well, but missing the middle delt which you can isolate through DB Lateral Raises (Lean slightly forward, thumbs up, slightly bent elbows).

- Arms are also made of three components: Biceps, Triceps, and Forearm group. Many novices think biceps are the key to big upper arms, but the triceps actually constitute ~2/3rds of the size of the upper arm. Biceps can be isolated with any of a variety of Curls. Triceps can be isolated with any of a variety of Extensions. The forearm group will already be worked well through most of the barbell exercises, but if you need additional work, Wrist Curls, Wrist Extensions, and Isometric Grips can all be added.

- Notice I said a defined core and not a big core. Everyone wants that hourglass shape: a skinnier waist than their hips and upper body. The best way to do this is not through exercise but rather through diet; get a BF% of ~15% for men or ~25% for women or lower and you'll pretty much automatically have the core you're looking for. That said, the core is active in every single compound movement we do so it is critical to work this weekly. There are literally hundreds of core exercises to choose from so I won't catalog them here, but do make sure that you don't neglect the obliques. Some people need daily resistance work here while others need only twice a week bodyweight work; time and plateaus will inform you if your core is holding back your lifts.

- A big, shapely rump. If you're following the base program as prescribed, the squat and deadlift are going to do wonders for your size as is. If you still want additional size, consider the Hip Thrust/Glute Bridge or Donkey Kick. Don't neglect those hip abductors either, they will add size to the sides of your rear.

Whoa, there are a lot of muscles to target here, do I need like 6 T3s then to cover everything?

NO. Unless you're trying to be a bodybuilder, please no. Instead, pick just a few to work on at a time. For instance, this three month block I'm really targeting delts and pecs, each twice a week. Next block I'm moving to triceps and traps. You're probably going to get way better growth from this twice a week method instead of hitting four muscles, each only once a week.

Cool, I'm done for today. If you guys liked it and want more info about T2 selection, I'll put that up another day.

Happy lifting all.

Edit: Added some Youtube links to certain exercises that people frequently have improper form on. Yes I realize I look like a Jeff Cavalier shill. No ragrets.


r/gzcl • • Feb 14 '19

Happy G-Day Gainerz!

508 Upvotes

Happy V-Day Gainerz. This post will provide the heart of how I’ve been training for the last two years. The few people I train use the same general structure. Some are 30+ weeks into this progression model and have blown past goals thought far away. A quote:

“Honestly, I would've taken a step back by now and just maintained my lifts and current physique just until my time management is better. But... just something about having a personal weekly/monthly structure and seeing numbers man... it just gets me up and going.”

I believe this comment summarizes the many reasons why you should use this structure for your training.

Preface: After my last powerlifting meet, 2016 USPA Colorado State Championship, I was needing a change of training direction. My body was tore up from military service; all the heavy lifting didn’t help either. Maybe it wasn’t a good idea to go hard for go harder’s sake, but it was fun being an active duty Marine for nearly a decade. No bullshit, it was great and somehow I was able to get my career to facilitate my lifting. Free leave for the IPL World Championships, for example. That was back in 2012, when I first began powerlifting. Before that I was just lifting, running, and doing all things physical: rock climbing, skateboarding, mountain biking, fun games in the pool where we try to drown each other (hey, Marines, remember?) I’m doing a lot more of that kind of stuff lately, not so much powerlifting. Clocked 6.8 miles in the snowshoes last week with over 1,000 feet of elevation gain. Also put up a PR amount of military press volume.

Now, don’t be deceived: I am “weaker” now than before, meaning my powerlifting total is abysmal. If that’s how you are going to define strength, then that’s great. (Maybe stop reading?) I believe for a period I would have said the same, and in doing so limited the genuine curiosity of the skill: strength. It draws views because of this nature. Because of that, many of you know me and are already training with some template derived from my now five-year-old GZCL Method. Its principles guiding everything, in loose form, from GZCLP to Jacked & Tan 2.0, and of course the beloved UHF. Last most of you heard I was running VDIP (Volume Dependent Intensity Progression) though recently I’ve dropped hints about something new. Some around here have coined this “VDIP 2.0”: it is a much greater evolution from that already proven progression. With it, a rhetorical universe of progressions unlike what many have seen or trained like before. (Not hyperbole.)

I am not saying I’ve reinvented lifting weights. What I am saying is this training structure carries several benefits. By no means an exhaustive list, just a few real good ones:

  1. Fewer plate changes, so if you love ascending and descending sets… I am sorry. This simplifies the workout and gives you more experience with a given weight. It also reduces the amount of ‘administrative’ time in the workout; meaning you’re lifting more and loading change plates less.

  2. Non-percentage based training. There is no training max to set and fuddle with, wonder about, and second guess after a single bad workout. This further simplifies the structure, giving you more clarity about progression and less worry about the small stuff. Bye-bye paralysis by analysis, hello genuinely trusting the plan (meaning you doing the work as described below).

  3. No more plans. Seriously. I can personally attest to running this on ‘theory’ alone. This will be detailed more below, as this concept is one of my favorite ways to ‘play’. I am confident a lifter can enter a gym with these concepts in mind, and if applied consistently, they will see progress.

  4. Proper checks and balances to Ratings of Perceived Exertion, the go-to method of ‘auto-regulation’ for lifters who don’t rely on percentages for their training, alone or at all. RPE works great for lifters who know their ability well, learning that is hard. This structure simplifies the concept of exertion, how you’ll rate it, then measure your own perceptions with follow-up action.

  5. Using the intuitive structure and auto-regulatory method, progress comes week after week. Since this foundation draws from VDIP understand that volume will drive progress. It is however checked by lift qualities, which are emphasized in this structure. Things like posture and concentric phase speed should be prioritized. The structure the progression of these things can be just as exciting (and visual if filming) as adding weight.

In summary, my training the last two years has been successful despite an absence from powerlifting. I’ve simply redirected my effort to more rewarding directions. Sometimes up mountains. While powerlifting is a very specific purpose to lift, I nowadays prefer to lift with a general intent in mind. Strength is of course a major aspect of my progress, but so too is endurance; both muscular and “cardio”. I cannot provide some big wilks number to impress, but here’s something to consider: I’ve managed to lose weight and remain a lean 150 to 155 pounds, down from around 185 with sleep apnea, high blood pressure, and other health issues. In the mean time my strict military press has remained greater than bodyweight and is only getting stronger. This is the one “pet lift” I am applying specificity to from the general structure that follows. I have a number in mind and will let you all know when I press it overhead with strict form.

I hope all of you enjoy General Gainz as much as I do. I’ll not provide “programs” here, only the fundamentals. The ‘general principles’ in other words. (The heart of the concept, for V-Day.) From these your imaginations and efforts in the gym will bring about your gainz. As I said above, this is the “heart” of my training. Thus, it is the most valuable (new) thing I have to offer regarding training content: It’s here, for you, for FREE. A book is planned to go along with this brief introduction to General Gainz. I hope when the time comes that I receive your support. I do not make a lot of money off this information, nothing like bigger names in training as “fitness” is not my primary income. I feel this is relevant because marketing, social media presence, and charisma carry brands far; information can be a brand. I prefer results to carry my brand. Part of the reason why I stepped away from social media the last year. Both to prove this concept to myself and to prove that without me (on YT, IG, or reddit often) my prior training concepts with GZCL principles can stand on their own legs.

You all proved that- I am eternally thankful.

GENERAL GAINZ

Terms & Concepts: These four actions lifters must take to get stronger using GG. (General Gainz) These provide a variety of progressive means that can be fun, challenging, and rewarding in ways unknown by other “methods.”

Find: Working up to a weight to be performed for a given rep max (RM) with good form. This should not be derived from a percentage but may in the initial week or two as a reference. While training the rep ability with a weight becomes a better ‘known’ for the lifter, so “finding” a new (heavier) one becomes easier.

Push: Taking a weight from a lower rep max to a higher one. For example: Trying for a 5RM, but during the set the weight feels easy so the lifter continues the set until a hard rep, which may come at the 6th or 7th rep.

Hold: Keeping a weight from a past workout and using it for the same rep max. Lifters may choose this if they feel they can “do better” with a 2nd chance. Maybe improving posture or speed, or even more sets with that known weight.

Extend: Doing more sets with a held over weight, or doing more sets after an “easy” rep max. Done to build volume and so progress that weight eventually to a higher RM.

In action: You “Find” a Rep Max, if it is harder than expected then the next week maybe you decide to “Hold” that weight over for the same RM. It ends up going much better that 2nd time, so after the RM set you “Extend” the number of sets with that weight. Stopping them before they begin to grind. The following week, now in week three, as a small test of yourself you “Hold” the weight again and try to “Push” it to a higher (lighter) rep max. The push is successful and you have taken a weight from heavy to light.

This is getting stronger.

T1 Range – Heavy Rep Maxes

Compound lifts commonly associated with the T1, your “main” or “core” lifts. Squat, bench, deadlift, press, front squat, row, pull ups, dips, for example. Do not perform unfamiliar or isometric lifts in the T1.

Rep Max Range: 3 through 6

Follow-Up Sets: Singles Only

Follow-Up Set Volume: Matching RM is goal, ex: 3 singles after a 3RM.

Extension Limit: +3 additional singles max, beyond the RM. For example, doing six singles after a 3RM rated as "easy".

RM:# Singles After DONE AT SAME WEIGHT AS THE RM!

3RM: 1-2 good, 3 Goal (Attempt RM progress; weight or push.)

4RM: 1 subpar, 2-3 good, 4 goal

5RM: 1-2 subpar, 3-4 good, 5 goal

6RM: 1-2 subpar, 3-5 good, 6 goal

*subpar means your capacity at that weight sucks and you should build it via follow-up singles.

Now, of course, the higher the RM of the relative tier the easier the singles after will be. True, and a great means to progress capacity relative to your RM ability.

The 6RM is the ‘Bridge Weight’, meaning that’s the point where a typical lifter’s capacity will begin to grow beyond singles after a demanding RM set. There’s something to the “cardio” joke about higher rep RM sets, like in J&T2.0. To progress the RM, either by adding weight or pushing it lighter in the standard (3-10) range you work to improve how many singles after are completed. Once they match (EX: 6:6) a push or weight increase has been earned.

T2 Range – Light Rep Maxes

Using the same compounds as the T1, but also including other varieties. Lift variety is encouraged! (Being more general in fitness approach over specific, such as a weightlifting training plan would be.)

Rep Max Range: 6 through 10

Follow-Up Sets: ‘Half-Sets’; reps done ½ as much as RM. Ex: 10RM followed by sets of 5 reps each.

Follow-Up Set Volume: Doubling RM is goal: 4 sets. Ex: 10RM + 4 sets x 5 reps each (20 reps).

Extension Limit: +2 additional half-sets max. (6 Max)

RM:Reps After (Half-Sets) DONE AT SAME WEIGHT AS THE RM!

6RM: 3

7RM: 3 to 4

8RM: 4

9RM: 4 to 5

10RM: 5

Complete 2 to 4 half-sets after your RM set. One set would be subpar and demonstrate that the RM was probably too heavy/hard and that capacity there is lacking. A reduction to a lower ‘found’ RM the next week would be the best course of action if just one follow-up half set is achieved. Three to four half-sets are average, and these can be extended up to six sets for a total of seven sets with the given T2 lift (RM set + 6 half-sets (2 of those being considered ‘extended sets.’) At those volumes the RM likely has ‘more in the tank’, meaning it’d be rated ‘easy’, or the capacity of the lifter at that weight is very high. Like with the T1, repetitive sets after the RM are ‘easier’ respective of that RM’s position in the range; meaning 5’s after a 10RM will seem easy, but that’s where other progressive qualities come into play.

Here in the ‘heavy’ end of T2 (Light RM Range) you see 6RM again. This weight is one where your capacity allows you to do triples after it, rather than singles. How do you know the difference? If you do a 6RM and can only do one set of three after, that’s a better weight for the ‘heavy side’ of the bridge weight- doing singles after. From there, you can build up those singles eventually pushing the 6RM to the light side with triples after. Such a ‘bridge’ period in your training might come after a phase with a successful push of a weight from a 3RM to a 5RM.

Rating the Difficulty of the RM set: Is easy! After completion, the RM effort is given either an ‘easy’, ‘moderate’, or ‘hard’ rating. It is easy if you believe there were more than 2 or 3 reps remaining (left undone, in the tank). The RM is moderately difficult if you believe the set could have only been pushed one more rep before failure; meaning one left in the tank. A hard RM set is one that ends without any reps remaining; one more attempted rep in that same set may have resulted in failure – that’s a hard set.

These ratings are given immediately after completing the RM set. Then, as the follow-up volume (singles or half-sets) is completed you’ll gain clarity on how difficult the set actually was, and how much capacity you have at that weight. It is not unusual to have a hard RM followed-up by a full number of singles or half-sets, especially nearer the lightest end of the range. Here you should pay mind to strict lift quality and rest: progressing ability by reducing rest between the half-sets. This increased training density with that consistent weight works it up to the lighter range, improving capacity in the RM sets; meaning pushes become easier.

T3’s

These are your accessory lifts, the things in your plan that target specific muscles to get them bigger and stronger. Maybe the intent is to have carry over to a specific T1 or T2 lift, if so great, but these can also serve prehab and/or rehab purposes. These are not done any “new” way, simply repeating a few max reps sets (MRS) with a goal of an average rep range for a given lift; some lifts do better lighter than others, for example: lat pulldowns versus side delt raises. Typically, 2 or 3 MRS are done with each T3 in a given workout.

Rest: This is a HUGE part of the General Gainz structure. Without it near endless follow-up sets can be done, so it is imperative that rest be adhered to. Keep in mind, rest itself is a function of progression within GG as you can begin to limit it between half-sets and singles in an effort to drive the RM to the lighter range.

T1 lifts: 3 to 5 minutes max after the RM set, aiming for 2 to 3 minutes between singles.

T2 lifts: 2 to 4 minutes max after the RM set, aiming for 1 to 2 minutes between half-sets.

T3 lifts: 30 to 90 seconds between T3 sets.

Lift Qualities: An important but overlooked aspect of lifting. How it’s actually being conducted. This matters because without attention injury looms. Furthermore, ignoring these stymies progress. Lifting better is getting stronger. (By no means exhaustive, but my top 4 we’ll say.)

Posture: This means things are aligned well. This will vary person to person and an experienced lifter will recognize when theirs has been compromised. Newer lifters working with GG can work towards improved lift posture with half-sets and singles, taking advantage of the relative perceived load decrease. While strict form should always be adhered, it is on the lower rep singles and half-sets that greater attention can be applied.

Speed: Speaking directly to concentric speed. Like pushing the bar off the chest on the bench. This should always be as fast as possible, taking advantage of the follow-up sets after the RM to focus on explosiveness to the end of the range of motion. This follows the concept of Compensatory Accelleration Training.

Tempo: The speed throughout the full range of motion, often with an emphasis on the eccentric phase. The reduction of sets in the follow-up work after an RM attempt allows for focused attention to this quality, which serves to improve bar control as well as muscular endurance.

Consistency: Across reps, from the RM set to the last follow-up set. Ideally every rep of a heavy RM looks like each of its picture perfect singles after. Same goes as the lifter gets stronger and pushes the weight into the lighter range over time. Consistency across sets is achieved with good results in the follow-up work as it remains at the same weight, versus lowering. Thus, requiring the lifter to “work at it”.

Example Workout A: T1: Press, Find 5RM, followed up by 4 singles (at the same weight!) (5:4) [Lifter chooses to hold weight for next workout.]

T2: Incline Bench, Find 6RM, followed by 4 sets of 3 reps (at same weight!) [Lifter will extend sets next workout.]

T3: Cable Row & Lat Pull Down 10-12 Reps/Avg x3 MRS; Face Pull & Triceps Extension 12-15 Reps/Avg x3MRS.

Example Workout B:

T2a: Squat, Find 6RM [bridge weight], followed up by 3 sets of 3 reps (at same wt!) [Lifter will complete full volume, 4 sets, next week then determine if push or extend is needed for workout after.]

T2b: RDL, Find 10RM, followed up by 4 sets of 5 reps (at same wt!), with a quality focus on the eccentric tempo, making that 3 seconds long on all follow-up half-sets.

T3: Hamstring Curl & Quadriceps Extension 10-12 Reps/Avg x3 MRS; Biceps Curl & Kneeling Cable Crunch 12-15 Reps/Avg x3MRS.

In both examples the T3’s are super-sets with themselves. Four T3’s is not mandatory, nor standard, nor expected. It’s an example. I find pairing my T3’s with T2’s a great means to add conditioning to my training, turning the last half of my workout into a circuit. This is of course a personal adaptation I’ve made using the General Gainz structure laid out above. Super-sets keep my conditioning up, which aids in my weight maintenance and parallel fitness goals. Like exploring the backcountry. I encourage you all to apply this structure to your training and adapt it to your needs and desires.

Now a plan, but no program: Dice Gainz (A lifting game)

What’s fun? Applying these RM ranges and follow-up set rules (singles/half-sets) with the progression and quality guidelines to a somewhat random “planning” device. Using an eight-sided dice, make the 1 now 9 and 2 now 10. This is now your 3 to 10 Rep Max range that is standard for GG. This is your first roll. The second roll decides the lift, which is chosen by you when assigning a number value to a lift. For example, a Dice Gainz lift list: (1) Squat, (2) Bench, (3) Deadlift, (4) Press, (5) Front Squat, (6) Row, (7) Incline, (8) Pull Up, (9) Chin Up, (10) Dips. This isn’t a “standard” list – make your own. Build it around your goals, thus making random rolls a little less so. For example, an upper/lower lift list, or lift list by body part if training with a split. Full body lists are great for less frequent training per week, three or four max. (More on this below) If the same lift is rolled twice in a workout, re-roll. Variety is your friend.

Roll for up to three movements. This makes three T1 or T2 lifts in a workout. (Do T3's as able/available/makes sense.)

What if you get a lift you don’t want to do? Then re-roll. We’re about fun here, but if you’re the kind of person who sees the challenge of a random roll as “fun”, then you’re like me, and you’ll find yourself “rolling lifts” less often; meaning you’re doing less rolls of the dice, because you’re doing what’s given – not re-rolling for what you want.

Dice Gainz is great for those times in our lives when we don’t have ‘enough time’ to have well laid out defined plan. Maybe a long vacation is just a few weeks away, or you’re in the middle of a move, or some other unstable issue outside of the gym. Here you have stability and fun in your hectic week, or weeks, and those precious few training sessions are seized for their worth. Why? DG is enjoyable and effort is high during those sessions, at least for me, if anything because I’m strapped for time. (Dad, husband, adulthood…) The principles of GG guide the workout, the dice simply force us to not overthink the planning aspect of it. It lets you get straight to lifting (especially if your lift list is memorized.)

From General to Specific (A few adaptations of the general ‘principles’ of GG.)

I have personally tailored this lifting structure (periodically relying on Dice Gainz) to my own specific needs and seen my press recover from an injury set back this last fall to the tune of 40 pounds recovered in a single month. Going from a hard 95-pound 7RM (a push after resetting to a moderately difficult 95x5RM post muscle tear) to 135x7RM. In six weeks, I watched 150 lbs. go from a hard 2RM with only 2 singles after, to 155 lbs. x6RM with 8 singles after, extending the follow-up volume because my capacity had improved that much. Granted, the military press is the lift I can train hardest of all so I waivered less under its chaotic demands when using Dice Gainz, which I adapted to an upper body dominate list to specifically “train around” the more finnicky squat and deadlift (for me). Here I’ve made my training specific to a goal (the press) but successfully used “the roll of the dice” to determine my progress.

The improvements I have seen in my lower body strength endurance is substantial. Like I said above, snowshoeing for miles (I currently omit details video will show later). Squatting and deadlifting for heavier rep maxes is skipped in favor of the lighter ones; sometimes the RM itself is skipped, then doing only the half-sets at a held over weight. Though some days these half-sets go so well on the first or second that I attempt (and make) a good quality rep max. I consider it somewhat fatigued, or ‘over-warmed up’; this specific adaptation of GG’s structure has made progress occur when percentage-based training was causing my repeated failure. (Is making a lift but not being able to walk that night considered a win or fail?) Not that percentage-based progressions are bad inherently, they are just too rigid for me.

Specific lifts do better with the T2 range over the T1; only a few lifts should be treated as T1’s because of the singles – T1 dumbbell work is pretty much not advised. Here GG is much more specific. Take DB rows for example, a terrible T1 within this structure. The lift itself is better suited for higher volumes, the same could be said for dumbbell work: setting up for a single? Stupid. Using T2 ranges works much better here, especially the 6-8 range with the follow-up sets being paired with specific lift quality; like eccentric tempo or concentric speed for example. Likewise, doing a standing single arm DB press with holding lockouts on your follow up sets only.

In the same wheelhouse, “what about pause work?” Glad you asked. Here, GG uses a specific protocol for paused work, like squats, bench, and deadlifts for example. Pauses for RM sets greater than 3 should be done as ‘bookend pauses.’ That means on only a 3RM would you pause every rep. All other rep maxes using a paused variety would only pause the first rep and last rep of the set. That last rep, if looking sketchy… maybe don’t pause. Consider holding that weight the next week and improving that specific lift quality (completing the bookend pause). After the RM set, with 1st and last reps only being paused, all subsequent singles would be paused (if working in the T1 RM range). In the T2, half-sets greater than 3 are also treated with bookend pauses. Meaning ‘the bridge weight’ discussed above (6RM) is a great place to apply your pause efforts.

Adding cardio and conditioning. Half-sets are easily paired with T3’s! Combine lifts as you can conveniently do (yay home gym); don’t be a dick and hog the gym. Pairing lifts is standard, but I also like triplets. Beyond that I might do a “chipper”, where I simply hammer through all my T3’s (sometimes up to 6) max rep sets with only 15 to 30 seconds rest between each. With these chippers I’ll time the whole event from first lift’s 1st set to last lifts final rep. Doing traditional cardiovascular/respiratory training, like running, or my favorite: hiking within GG’s resistance training structure is simple. Consider a day where you’re expected to squat or deadlift but aren’t yet recovered from a hike: Skip the RM and limit the half-sets at a weight held over from your last workout. Alternatively, the RM could be attempted and ceased when quality stops. Then noting what specifically happened and at what rep, this gives you a RM gap; what happens when fatigue lowers an expected rep target. Personally, foregoing the RM altogether works best for me if a run/hike/bike left me too sore or beat up. Half-sets of 3 or 4 reps are a blessing for getting back into the groove; the weight is just right, and the reps per set too.

The Wrap-Up

If you’ve made it this far I hope I have made General Gainz seem like a great training structure. It is an evolution from VDIP, which I really enjoyed. I’m loving training now more than ever. My workouts go by quick, not simply because my conditioning is high, but also because the RM to follow-up sets at the same weight reduces significant portions of time spent not-lifting in the gym. This format also makes rest discipline easier, as well as figuring near any other aspect of data; there’s not a variety of weights being used on the same lift in the same workout (in most cases, see: variety!) I could go on and on about General Gainz, and I will in an upcoming eBook.

In the meantime I plan on reaching out to the people at Gravitus about app support, as they have been kind to me in the past; actually at the very start of my ‘hermitage’. I hope I didn’t let them down by ghosting them, and all of you :\ To be honest, social media was fucking with my fitness. I can admit that now, but two years ago, probably not. I’ve always been weak to social pressure but try to remain aware of how it affects me. Stepping away and focusing on developing a new way of training, mostly for me then proven to be successful lifter after coached lifter, has been a blessing. It wasn’t long after my last meet that squatting 135 was a nightmare; I had been here before and found myself in the same boat once again – I had enough. Same goes for the bench and a recurring pec issue, and deadlift hip issues too. Something had to change, drastically, so I made that happen. Been happy about it and enjoying training since.

From my heart to yours.


r/gzcl • • Nov 11 '19

General gainz cheatsheet

Post image
286 Upvotes

r/gzcl • • Jan 01 '25

Quality Content / Research The Death of Science-Based Lifting

Thumbnail
swoleateveryheight.blogspot.com
269 Upvotes

r/gzcl • • Feb 21 '26

General Gainz: A weight training framework (Book Now Available)

208 Upvotes

Hello everyone! It’s Cody again.

Introduction

Yes, I’m still training daily. I have surpassed 2,500 consecutive workouts. Admittedly, about a year ago, something happened with my health (which I do not want to share), and it has impacted my performance. My doctors and I are figuring things out. But, facing this struggle, I am grateful to have training be an anchor in my life. It gives me a sense of control on days when it seems I have none. Why do I train every day? To see if I can. Because I must.

Perhaps some of you are not familiar with my history despite using my programs or derivatives. Allow me to introduce myself. I began posting on r/fitness 15 years ago and have published dozens of free training programs on my blog Swole at Every Height. Perhaps you’ve used one of my programs and didn't know it was me who created it; GZCLP and Jacked & Tan 2.0 are my most popular here on Reddit and across many training apps. These programs, and many others I’ve released free of charge, have increased the strength and muscle mass of multitudes; one of the achievements I am most proud of.

In terms of my own size and strength, I stand at a towering 5’5” and have competed in powerlifting across weight classes from 148 to 181 pounds. My all-time best 1RM lifts are Squat 525 lbs., Bench 380 lbs., Deadlift 635 lbs., and Press 250 lbs. Two of those, the squat and the press, were achieved after leaving powerlifting, using my General Gainz training framework. Using that framework, I also got very close to my previous bench press best, but I was a little too greedy one day and had a setback. Bummer. At 40, I’m becoming more risk-averse. Funny, because with the deadlift I trained to an all-time personal record without a belt, successfully pulling 600 pounds (with straps); however, that was achieved with a different free program of mine (Maelstrom), which, in a way, is inspired by General Gainz (GG henceforth).

If you want to read more about some notable squatting I did a few years back, here’s a post I made on r/fitness: The Tom Platz Experience: Pain, pleasure, and high-rep squats.

General Gainz: The Book

First, I’d like to thank the man who helped me by editing my mess. Ben, you’re the man. If you want to read his quite popular guest post on my blog, check this out. He also wrote this GG-inspired plan, which is also often referenced.

Anyway, seven years ago, I first posted about GG, giving the rough framework. Since then, I’ve used it pretty much exclusively (except for Maelstrom & Monotony linked above). Using GG, I’ve successfully trained my clients, both online and in person. Many others from around the world have found it online, applied GG to their gym efforts, and grown bigger and stronger, too. There’s been a lot of tinkering and expansion of the concept, and along the way, I’ve made notes on the exploration of this novel training framework. What makes it unique compared to other methods or programs you might find?

-        GG’s framework reformulates the three tiers of training that I popularized over a decade ago: T1 for heavy lifts (competition), T2 for moderate weights (assistance), T3 for light weights (accessories).

-        GG is based on Rep Maxes, not percentages. Okay, not super unique, except in how these are specifically progressed by the execution of their follow-up volume.

-        The volume of the T1 and T2 is based on the day’s RM, not a training max, and not a percentage. This is achieved by performing Volume Drop Sets (VDS): using the same weight as the RM for more sets, but with fewer reps per set, as a lift’s follow-up volume.

-        VDS affords higher rep quality and faster average rep speed, thereby improving skill development while reducing recovery demands. These are important factors to me because of old injuries that I must be mindful of (and as of late, some complicated health matters).

-        The framework is inherently flexible and intuitive. Each workout informs the next. Your data develops the subsequent workout; adjustments are accounted for and guided within sensible perimeters.

-        Multifaceted progression options with open-world potential, allowing for individualization unlike any other off-the-shelf program you might find elsewhere (even my own of years past).

After seven years of experimentation and note-taking, I’ve put together a book on this training framework that I am confident will provide many new things for you to try in the gym, whether that’s a whole new program (there are 9 program templates in the book with a slew of options for customization within each), a new progression approach (perhaps you’ve only known to add weight), or perhaps a new way to look at your training (maybe as a creative endeavor instead of self-harm).

The GG book outlines the structure, covers critical concepts and details, and provides several template programs. But, with all the information provided, GG can (and should!) be tailored to your goals and abilities. This manual also covers how and why those changes might be implemented in the gym. Whether your goals are powerlifting, bodybuilding, or generally improving your size, strength, and endurance (as the name implies), this framework is for you.

Here’s a diagram that provides a high-level view of the structure. From this, you might imagine the progression options within.

General Gainz: a weight training framework is available on Amazon as an eBook and paperback (190 pages, not filled with a bunch of needless pictures of me lifting or artsy photos of squat racks; damn near all words and numbers).

What’s Next?

I will keep training daily as long as my health allows and continue publishing content about training. But in the spirit of “Try Trying” (a personal mantra), I’ve decided to challenge myself beyond what I feel most comfortable with: physicality.

So, last year, I started writing fiction and publishing it on my Substack (all free). If you’d like to read those pieces, I’d be stoked. Mostly, I’m writing stories that deal with physicality, and what it means to be human, in a general sense, I suppose.

Here are a few short stories (around 1k words or less) that this subreddit might enjoy:

-        Artificial Sweetener: A grandmother tries connecting with her grandson in the physical world. (Sci-fi)

-        The Spirit of Strength: Two boys buy a used squat rack and get stronger. (Literary fiction.)

-        Waiting Weights: A man meanders back to familiarity. (Literary fiction.)

-        Dirt Speaks: A woman goes for walks. Others ask to join. (Literary fiction.)  

-        Lost and Found: A heavy package is found alongside a highway. It is brought to the addressee. (Literary fiction.)

Gratitude for this Community

When I started posting about my training and helping others here on Reddit, I never imagined it would blossom into what it is now. Somehow, in all the madness of this world, lifters have supported a manlet who went on to open a gym in a tiny mountain town; a gym that is now changing lives. You, Reddit, have, in the course of things unexplainable, opened a space for teens to gain confidence and socialize, freed adults from alcoholism, and given those in old age the strength to keep doing the hobbies they love. Skiing, hiking, mountain biking, and so much more. With no exaggeration, you’ve made a real and lasting impact in my little corner of this earth; as I have helped the globe gain strength, you have helped my neighbors. When people in my small town ask how I was able to open a gym, I smile and say, “Well, a long time ago, I started posting about training on Reddit, and now we’re here.”

If you’d like to support my community and me, please consider buying the General Gainz (eBook or paperback) and subscribing to my Substack. 


r/gzcl • • Dec 05 '19

saw this on dankemems and had to...

Post image
201 Upvotes

r/gzcl • • Mar 24 '23

Quality Content / Research ANNOUNCE: As requested - SINGLE spreadsheet versions of my GZCLP+ compilation

190 Upvotes

You asked, I provide.

These links are to the current version of the GZCLP+ spreadsheet, but which only contain a SINGLE version of the program. All other functionality remains the same. This should help with the file sizes and opening on older phones and such.

Current Version: v5.5x (Last Updated 8/28/23)

KNOWN ISSUES

  • None

LAST UPDATE

  • GZCLP 5D v5.51 - Fixed 5th day linear progression bug - thanks /u/QuintupleA

If you find any bugs, please submit them to me via DM and/or this thread. It's very helpful to me if you include the following information:

  • Version you're running

  • Program you've selected (e.g. 3D GZCLP, 6D JnT)

  • Week you encountered your error on

  • A Dropbox link to your program if possible

Please please please follow the instructions on the start page. :)

---

GZCLP 2-Day - https://www.dropbox.com/s/s3jc0b2ikrv19d6/%28Current%29%20GZCLP%202D.xlsm

GZCLP 3-Day - https://www.dropbox.com/s/i0ay1kpjr7f8084/%28Current%29%20GZCLP%203D.xlsm

GZCLP 4-Day - https://www.dropbox.com/s/onf5rmku7r5ou1r/%28Current%29%20GZCLP%204D.xlsm

GZCLP 5-Day - https://www.dropbox.com/s/4qkcrvuendf41ru/%28Current%29%20GZCLP%205D.xlsm

GZCLP 6-Day - https://www.dropbox.com/s/xm5p367c8ug4y0v/%28Current%29%20GZCLP%206D.xlsm

3-Day PPL - https://www.dropbox.com/s/2ciut4g61vfrafj/%28Current%29%20PPL%203D.xlsm

6-Day PPL - https://www.dropbox.com/s/dpt9onlukf9xjqi/%28Current%29%20PPL%206D.xlsm

5-Day Straight LP - https://www.dropbox.com/s/mpn2pvy6oy1qsn6/%28Current%29%20Straight%205D%20LP.xlsm

6-Day Straight LP - https://www.dropbox.com/s/xcib6pd834vrmhn/%28Current%29%20Straight%206D%20LP.xlsm

JnT 3-Day - https://www.dropbox.com/s/vnt7lk5zvubge0c/%28Current%29%20JnT%203D.xlsm

JnT 4-Day - https://www.dropbox.com/s/7ga6cyhvb4gj7yl/%28Current%29%20JnT%204D.xlsm

JnT 5-Day - https://www.dropbox.com/s/yi4s74zx447komy/%28Current%29%20JnT%205D.xlsm

JnT 6-Day - https://www.dropbox.com/s/hdcwdl27ket9sld/%28Current%29%20JnT%206D.xlsm

JnT 7-Day - https://www.dropbox.com/s/wes2wa126lpjbjx/%28Current%29%20JnT%207D.xlsm

50 Day Every Day - https://www.dropbox.com/s/tqo93fdo37iyuu9/%28Current%29%2050%20DED%207D.xlsm

Also, just in case you need/want an older version, here's the direct link to the full dropbox:

https://www.dropbox.com/sh/iqd8ev7h7jn5mzg/AADj4JSB-NnYTyR9MvodXhS6a

(Reminder - you can't edit this file directly, you need to save a local copy to your desktop)

I would HIGHLY RECOMMEND that users set up a Dropbox account (it's free!), and use the app on their mobile devices in combination with the Android/iOS versions of Excel. It works flawlessly for me. Here's how: https://help.dropbox.com/installs-integrations/mobile/edit-microsoft-office-files-mobile .

Probably the #1 question I get asked. Do I ABSOLUTELY POSITIVELY need Excel on the desktop in order to use this spreadsheet / for it to work?

Short answer, yes, and no. I developed it on Excel for the Desktop, and I do my testing to ensure that things behave in that environment.

While you can use this with the web version of Excel, Google Sheets, LibreOffice, etc., I do not recommend it, as I did not create it for those platforms. Please see https://www.reddit.com/r/gzcl/comments/10zb7pr/comment/j8a5wf3/ for very specific workarounds that you will have to do in order for things to work. YMMV.

[ NOTE: If you have multiple displays running at different resolutions, excel doesn't display dropdowns properly - see https://answers.microsoft.com/en-us/msoffice/forum/all/excel-drop-downs-not-working-on-external-monitors/6691a28e-82aa-4360-bab1-51fced80149d ]

---

You asked for (most of) these.

  • Revamp revamp revamp of the underlying code structure

  • 3, 4, 5, 6, 7 Day Jacked & Tan Program (based upon /u/gzcl 's JnT 2.0 Program)

  • 2, 3, 4, 5, 6 Day GZCLP Options (based upon /u/gzcl 's GZCLP Program)

  • 3 or 6 day PPL Options

  • Advanced 5 or 6 day Options (same 5/6 exercises every week, same day)

  • Advanced 50 Day Every Day option (based upon the DLED/PED program by /u/DadliftsnRuns/)

  • Added 5x5+ rep option (mirrors Stronglifts progression)

  • Now up to 3 T1s

  • Now up to 6 T2s

  • Now up to 8 T3s

  • Lots of new room for "custom" lifts on DropDowns tab

  • All lifts adjust automatically and independently

Other Features:

  • Start tab - every option is modular and independent by exercise (or use default for any and all options)

  • Graphs! Visualize your sweet gainz!

  • Plate Loading Calculators (in kg or lbs)

  • Estimated 1RM calculators galore

  • IPF, Goodlifts, Wilks, and DOTS points calculators

  • Enter your sex (defaults to XY) and weight each period to calculate your (estimated) Wilks!

  • Now you're able to tailor your T1 progression based upon the number of reps on your AMRAP set

  • Selectable Option: lbs or kg

  • Selectable Option: Use Microplates (like these: https://www.amazon.com/dp/B00XNCRLA4)

  • Selectable Option: Weight Progression


r/gzcl • • Jan 01 '21

just wanna share that I hit 231lbs (105kg) after 3months of failing 225lbs (100kg) @ 150lbs (68kg)!! what a start of a new year 🙏🏻 happy lifting fam

170 Upvotes

r/gzcl • • Feb 25 '21

99% of posters can lift weights with >1x their BW. Novice lurkers may feel their numbers puny, like I sometimes feel. For my fellow novices, here are my piddly numbers. I'm proud of them; so should you of yours.

164 Upvotes

I notice that practically all lifters that post on this sub are, at minimum, experienced "novices" (over 1 year of lifting), and already reached weights >1x their BW. Despite this, I'm sure there exist many, many beginners on this sub, yet mostly lurk through a combination of embarrassment at their understandably low numbers.

As one of these true novices, I know too well this feeling. Everyone's numbers are multipleshigher than mine. If course you're not meant to compare with others, but it's an unconscious action. So, for any fellow novice feeling like an imposter because they can't lift the weights that 99% of members post, here's my 1% numbers that I'm absolutely fucking proud of (at 220lb BW):

  • DL: 120lb@5x3, 90@3x10

  • Squats: 110lb@5x3, 80lb@3x10

  • BP: 80lb@5x3, 55lb@3x10

  • OHP: 65lb@5x3, 45lb@3x10

I should add that my with OHP which is already my weakest lift, I'm already struggling at the weights given above. BP is not far behind. Basically, my upper body is very weak.

Also, I've taken a week off due to a swollen knee that was getting worse until I stopped my sessions altogether. When I come back, I won't be surprised if I've lost strength and the above weights go even lower.

They are low numbers when looking at any other poster on this sub. I may even be low for a beginner. That doesn't matter. I'm proud of them. Why? Because **these numbers are better than when I started. That is what matters.

Starting low is fine. Everyone starts somewhere. With GZCLP, you'll add 5-10lbs per lift per session. You'll get better, fast. Self improvement is our sole goal as a beginner. Build a habit, practice the lifts, and eventually your mastery of them will make you stronger and more muscular than you've ever been. In a year, you will be the one posting weights with >1x BW :)


r/gzcl • • Apr 03 '18

[Guide] Jacked & Tan 2.0 (JnT 2.0)

157 Upvotes

I wrote this as a reply to a comment on /r/fitness, and /u/Obleeding suggested I post it here. So here it is!

Let me know if you think anything should be added/removed.

 

Methodology

The basic premise is that each day you have three categories of exercises to train:

  • T1: Main compound lifts (competition lifts). e.g. squats, sumo/conventional deadlifts, bench press and OHP.

  • T2: Close variations of the main lifts (that complement the main lifts) or back exercises. e.g. fronts squats, RDLs, slingshot press, push press, or rows, lat pulldowns.

  • T3: "Accessory lifts", these are isolation movements for lagging body parts. e.g. curls, facepulls, leg extensions, shrugs, calves, etc.

The goal is that, all these categories work together to improve the main lift. e.g. T1: Squats, T2: Front Squats, T3: Leg Extensions.

Before you start it's advisable to know your Training Max (TM), which is a weight you can easily lift for 1-2 reps (not a 1RM).

 

Scheduling and Setup

Each day you go through the three categories. The suggested volume is 1 T1 exercise, 2-3 T2 exercises, 3-4 T3 exercises. For all sets it's required to work with a weight that allows you to have 1-2 reps in the tank after finishing. The last set of each exercise is an all out set (AMRAP).

 

T1 Setup

The goal of each day is to work up to a certain Rep Max (RM) then do 3 following sets at a lighter weight (this weight is calculated based on the current Training Max). The last set is always an all out set.

The Rep Max means the maximum weight that can be lifted for the required reps, with 1-2 reps left in the tank. e.g. an 8RM means a weight that can be lifted for 8 reps, leaving 1-2 reps in reserve.

Finding the daily rep max is a trial and error case. As one goes on it's easier to estimate the rep max of the day.

Example workout: 5RM of Squats, estimated 5RM is 120kg

  • 60kgx10 -warm up

  • 80kgx5 -warm up

  • 100kgx3 -warm up

  • 110kgx2 -warm up double

  • 115kgx1 -warm up single

  • 120kgx6 -5RM attempt (estimated 5RM was low). Can go heavier or stop here (1-2 reps)

  • 125kgx5 -5RM attempt. Rep Max found, proceed to backoff sets

  • 100kgx3 -back off set 1, fixed weight (calculated from TM) and reps

  • 100kgx3 -back off set 2, fixed weight and reps

  • 100kgx5 -back off set 3, fixed weight and AMRAP. Done with T1

T1 rest times are 3-5 minutes.

 

T2 Setup

T2 are composed of 2 subcategories: T2A and T2B/T2C.

 

T2A Setup

The second exercise is done in a linear progression fashion, reps across, based on percentages of the training max.

Example weekly plan: RDL as T2A for Deadlift (DL), assume the deadlift training max is 150 kg.

  • Week 2: 4 sets of 8 reps at 65% of DL TM -> 4 sets x 8 reps x 100 kg

  • Week 3: 4 sets of 6 reps at 70% of DL TM -> 4 sets x 6 reps x 105 kg

  • Week 4: 4 sets of 4 reps at 75% of DL TM -> 4 sets x 4 reps x 115 kg

... and so on

One should always be able to finish the planned sets/reps for T2A. In case of failing it is suggested to reduce intensity and/or TM.

T2A rest times are 2-3 minutes.

 

T2B/T2C Setup

The rest of T2 exercises are done in a protocol called Max Rep Sets (MRS). First you work up to a certain Rep Max (as in T1). Then, using the same weight, you do 3 more AMRAP sets.

T2B are usually set as back workouts, but it can be customized to one's needs as they see fit. The goal here is to accumulate fatigue.

Example workout: 6RM of Lat pulldown

  • 30kgx9 -can go heavier

  • 35kgx7 -can go heavier

  • 40kgx5 -Rep Max missed (allows for better estimation next week), proceed to MRS

  • 40kgx3 -MRS 1, same weight and AMRAP

  • 40kgx3 -MRS 2, same weight and AMRAP

  • 40kgx2 -MRS 3, same weight and AMRAP. Done with T2B/T2C

T2B/T2C rest times are 30-60 seconds.

 

T3 Setup

T3 exercises are the typical bodybuilding stuff, used to target lagging muscles for the main lifts. They are performed in the same manner as T2B/T2C exercises using MRS.

T3 rest times are 30-60 seconds.

 

Notes

  • A 1RM calculator can be used to give an estimate for the Rep Max sets.

  • I strongly suggest going through this spreadsheet (thanks to /u/steve_dc), it's formatted in a very simple visual style that makes understanding JnT2.0 easier.


r/gzcl • • Apr 09 '23

Quality Content / Research Burrito But Big: A 'General Gainz'-based 12-Week Planner

152 Upvotes

Burrito what?

One of the great things about /u/gzcl's General Gainz framework is that you can make it entirely your own to match your personal preferences and material conditions without being yelled at for “not doing the program”.

After spending a few weeks doing mostly isolation exercise-based training after catching COVID to give my heart and lungs a chance to fully recover. I found that while, yes, four different types of curls and hitting this and that deltoid angle and whatnot is fun, but it makes things way more complicated than they really need to be. And it carries over into the psychological side of things as well. I’m a habitual overthinker anyway, the last thing I need is to sit on the couch and start worrying about whether or not I’m hitting the lower third of the quadrilateral triceps head enough. Because as of last year, I'm now officially in my himbo phase. No thoughts, just vibes pump.

I knew that I wanted to go back to a more simplified and back-to-the-basics approach. As General Gainz works stupidly well, and 5/3/1 Boring but Big works stupidly well, I started wondering: How about I try to figure out what it is that makes them work so well, and see if I can’t combine those bits and pieces for my training? And over the course of the last year, I played around quite a bit with different setups and combinations. Some worked great, others I scrapped.

What I ended up with is a simple and intuitive way of setting up a customized four-day Upper/Lower split in the style of 5/3/1 Boring But Big, adapted within the General Gainz framework, and set up for a repeatable 12-week cycle. There’s admittedly nothing terribly groundbreaking here, but I did feel like this thing could be quite useful for anyone who is currently (thinking about) running General Gainz, especially for those who are looking to add a bit of structure to their training without committing to a full five-year-plan:

Link to Google Sheets

(Note: Hit File -> Make a Copy)

However: You’ll notice that this is not an actual full-on program spreadsheet with 1 RM input and workout tracking all that neat stuff.

It’s not supposed to be.

In an ideal world, I’d like you to set up your 12-week plan, print it out, take it with you to the gym for reference, work your ass off for twelve weeks, and not even think about touching Excel until you’ve finished the last workout of the last week. Log your training by hand, take notes of what does and doesn’t work well for you, but don’t go screwing with the spreadsheet until you’re done.

I know how tempting it can be to tinker and try to oPtiMiZe and mess with a program while you’re running it, and how easily it can screw with your progress. “Oh, Smart Science Man™ says [obscure exercise variation] has a 9% higher EMG reading on the vastus lateralis than Back Squats? I better change my main Squat exercise halfway through the training block even though it’ll reduce my working weight by half for those optimal gains!”

Commit, do the work, and go through your notes afterwards to see what you can improve the next time around. Having something physically printed tends to just make it a lot easier to stick to a plan.

Does it work?

Most definitely. In the last few months, I managed to set or break a number of goals I’d set for myself, including:

Additionally, as I’ve been focusing more on the hypertrophy side of things, I’ve continued to make some very respectable gains on the thickness and fashion side of things..

None of this should come as a surprise though. The essence of all this is still 100% Cody’s work. As with all his programs, if you consistently put in the effort, you’ll get the results. Full stop.

That said, the planner I put together and the changes I made have not been officially GZCL-certified or otherwise endorsed by Cody, so any failures of this program should not be taken as failures of the original General Gainz model.

Training Logistics

I train in my home gym during mt 1h lunch break, and it was important to me that I could get my training done within an hour, including warm-ups. Lately, I’ve been toying around with two-a-days, where I hit the main and supplemental work during my lunch break, and move the lighter assistance stuff to a quick 10-20 min secondary session in the evening. Both work great, and if you have a Pull-Up bar and a pair of dumbbells, you can easily do the assistance at home and maximize your time in the gym with the heavy stuff.

Either way, this training format shouldn’t take you much longer than 60-75min if you stick to your rest periods and aren’t so insanely strong that it takes you 30min to work up to your working weight. The two main lifts each day will provide a solid stimulus already if you put in a good effort, and most people probably don’t need to spend more than 20 min on pump’n’fluff work afterwards. Something simple like a giant set of Chins, Dips, Curls, and Skullcrushers for 3-5 rounds will do wonders for putting on size and not take a whole lot of time.

Generally, supersets are heavily encouraged as with GGBB, especially antagonistic ones on upper body days. Do some sort of pulling every day, regardless of whether it’s heavy Cheat Rows or Face Pulls.

Training 5+ Days/Week

Hell yeah. But instead of adding another full day of strength work, maybe lean more towards bringing up weakpoints or conditioning instead. If your arms are too small, go find a John Meadows-style Arm Day and do that as your fifth day. Forget about the weight, and go for high reps and a gnarly pump. Or spend 10-20 min alternating Dips and Chins. Just don’t forget to adjust the assistance work on your main lifting days accordingly to avoid overuse injury, especially on your elbows.

What I myself had good success with these last couple of months was a “Shoulders and Conditioning” day. 20-30 min of KB Snatches, KB Clean & Presses, and Pull-Ups, followed by few rounds of a quick Side Raise and Face Pulls. superset.

The remaining two days I spent doing 20-30 minutes of intervals with a jump rope and a few different movements to cover all your bases, such as KB Swings, Pull-Ups, Push-Ups, Goblet Squats, and something for abs. Don’t be an idiot and do heavy sandbag work the day before high-rep Deadlifts, but don’t be afraid to do some kind of challenging full-body work. Start easy and allow your body to adapt, and you’ll be just fine.

You don't even need to go to the gym for that, if you have a few bucks to spend on resistance bands and a cheap Pull-Up bar. I wrote a whole thing about that about a year ago. For more Inspiration check out /u/mythicalstrength's Little Book of Bad Ideas if you haven't already done so, or anything that Brian Alsruhe has put out.

As this is all optional and shouldn’t take away from your recovery or factor too much into long-term planning, I did not include it in the spreadsheet.

Lift Rotation (Optional)

In the spirit of the GZCL Wave Forms programs, you can easily include a constant rotation of a few main lifts to keep yourself well-rounded. Simply select the exercises for each month in the dropdown menu, adjust the progression if need be, and you’re good to go.

Or you might consider going from under-load to over-load variations as the weeks progress, Alexander Bromley-style. With the Competition Bench Press as a T1 throughout the entire 12 weeks, you could start your cycle with four weeks of Close-Grip Benching as a T2 to bring up your triceps. Then spend the next four weeks pushing the weights on your Touch’n’Go Bench. And finally switch to the Slingshot Bench for the last four weeks to build confidence with heavy weights.

Progression

Something I implemented here was the concept of "Leaders and Anchors". Stole it straight from 5/3/1, sorry Jim. For anyone not familiar with the concept, “Leader” refers to a mesocycle that features a higher volume of barbell work to build muscle mass and strength potential, “Anchor” refers to a mesocycle that allows you to realize said strength and translate it into something tangible. But a peaking program this is not. We’re not looking for a true and certified®™ 1 Rep Max, and we don’t stand much to gain from spending 12 weeks peaking for a gym PR when we could have used those 12 weeks to get bigger instead.

It’s more of a way to gauge to which extent the work you did has carry-over to heavier weights on your primary lifts, and to make adjustments if need be. If you’ve made great progress on your close-stance Tempo Platz Squats, but find that you still fall forward immediately on heavy Front Squats, you’ll know that maybe it’s not your quads that need more attention next time around, but your back. And, of course, it will allow you to brag about finally hitting that n-plate Bench for a single. Also, it can give you something to work towards, if you prefer having some kind of deadline.

As with 5/3/1, two Leaders followed by one Anchor should be a good starting point for most people. You could certainly go “full bodybuilder” and run it as an infinite off-season consisting of Leaders only, General Gainz Body Building-style, which I myself can highly recommend.

For both Leaders and Anchors, the sheet has a few different progression options that I'll explain below. In the long run, there will likely be little difference as far as the results are concerned, as the overall volume is quite comparable. You may simply find that some options work better with certain lifts or are more compatible with certain short-term goals, or that you personally find some of them more enjoyable and engaging than others.

Progression: Leaders

T1 – Option A: Classic (a.k.a. The O.G. G.G)

Ol’ Reliable. Find a 6 RM, stick to that as your working weight, and try to push it to a 10 RM by the end of week four. Follow it up with 4 (or up to 6) half-sets, and you’re golden. Incredibly versatile, and works like a fucking charm. Without a doubt my number one favorite training format.

Keep in mind that the 6-10 RM range is technically the T2 range, so this is a “General Gainz Body Building”-style T1, but as we’ve got a heavier mesocycle with <6 RMs coming up afterwards anyway, there’s no harm in leaning towards higher volume for now.

T1 – Option B: Conditioning

The weight progression here is the same as for Option A, as is your rep goal for the follow-up work. You’ll aim for 2-3x your RM. The only difference is found in the way the follow-up work is structured. Instead of following up an 8 RM with 4-6 half-sets of 4 reps each (i.e. 16-24 reps), you stick to singles, doubles, and triples, and try to get all of your goal reps within 10 minutes. This usually turns into an EMOM, or something close, and using the example of an 8 RM, you might try to hit 10-12 doubles, one every 50-60s, depending on how well the weights are moving.

It’s fantastic for lifts that are more “grip it and rip it” (such as KB work, any kind of Clean and/or Press) rather than lifts with an elaborate setup (banded Box Squats in a Monolift). It’s also a good option for skill-based stuff or pause work.

It might seem tempting, but you don’t need to go all the way to the top range of the suggested follow-up volume. If you start with triples and notice that your reps start turning into grinders five minutes in, drop down to doubles. Think speed, not grind.

I’ve written about it quite a bit more in-depth here*.*

T2 – Option A: Classic

Conceptually the same as for the T1. But as our 6-10 RM range is already well-covered by the T1, I’d nudge this up just a tad to an 8-12 RM. The Half-Set format stays the same.

T2 – Option B: Conditioning

Again, the same concept as easlier, but applied to slightly higher reps

One combination that I’ve found to work well is the T1 Classic progression for building brute strength, followed by an easy-ish Conditioning T2 that allows you to get in a lot of clean submaximal volume. If your work capacity is still catching up, two exhausting T1s and T2s right after the other might have you either a) sandbagging your T2 because you want to save some energy for the T3s or more commonly b) sandbag your T3s because you’re already spent from the T1 and T2. If that sounds like you, consider giving this option a shot. Not to say that this option is easier, per se, but I do feel like the accumulating fatigue is quite a bit lower.

Due to the short rest periods, this option isn’t ideal for supersets, although you can certainly push the pace even further by squeezing in low reps of things like jumps or Pull-Ups.

T2 – Option C: High-Volume

Start with a 10 RM, and push up to a 16 RM. As we’re now getting into the rep ranges where the effort gap tends to increase quite a bit, your follow-up work will change slightly. Instead of keeping the reps fixed and adjusting the number of sets based on fatigue, we flip things around. You’ll do a fixed number of sets, and the number of reps will vary based on fatigue. The rep range for your follow-up sets is based on Half-Sets on the low end and Three-Quarter-Sets on the high end. In the case of a 12 RM, that would be between 6 and 9 reps per follow-up set. Try to get as close to the top end of the range as possible, which should still allow you to leave a few clean reps in the tank. I always like setting a goal of 50 total reps for week four, which is also the reason this whole thing is called "Burrito but Big". This usually looked something like a 16 RM followed by sets of 12, 11, and 11. Great for putting on size, bad for fitting into jeans.

As the individual sets are harder than regular half-sets, I’d recommend dropping the number of sets down to 3, which seems to be the sweet spot. But as always, you do you.

T2 – Option D: Widowmaker

Instead of finding a 10 RM and basing your working weight around that, pick the weight that you want to hit for 20 at the end of W4 (or W8, if it’s a very lofty goal), and chip away at it, week after week. Don’t be an idiot, but make sure you actually have something to work towards.

My recommendation would be to keep the first three weeks “strict”, with little rest between reps, and only switching to a rest-pause or Breathing Squats style during Week 4. Spend three weeks building your work capacity and confidence, and one week going for an all-out, no-holds-barred, death-or-glory effort. This option is likely a bit more appropriate for Squat and Deadlift variations.

As your rep max should be pretty hard each week, you’ll probably find that regular half-sets will be plenty of work here. But if you want to push the follow-up reps, similar to the High-Volume approach, don’t let me or common sense stop you.

Progression: Anchors

T1 – Option A: Classic

As always, you start by finding an easy 6 Rep Max. But rather than adding reps with the same weight each week as we did before, you decrease the reps and add weight. More specifically, you’ll find a 6 RM in the first week, then a 5 RM, then a 4 RM, and finally work up to a 3 RM in the fourth week. Simple stuff. Stick to the T1 volume guidelines from the original GG framework of trying to match the rep max, and extending to +3 at most.

T2 – Option B: Heavy

You’ll spend each week going for a 6 RM, a 4 RM, a 2 RM, and finally a 1 RM, respectively. Not unlike the first block of Jacked & Tan 2.0. Standard rules for follow-up work apply.

T1 – Option C: Flexible

Handy for lifts where the difference between a 2 and 3 RM might only be a few kilos, or where it’s not possible to set the weight increases at will (e.g. kettlebells, implements). Instead of aiming for a strict rep max, simply add weight in whatever way possible, and let the rep max fall where it may. As with the original General Gainz. The number of follow-up singles will be determined by the rep max you hit.

T2 – Option A: Classic

Same concept again as the T1, but for higher reps. We’re starting again at a 10 RM, and working our way up to an 8 RM, 6 RM, and finally a 5 RM. A great option for lifts that you’d like to rotate from a T2 into a T1 in the next cycle.

T2 – Option B: Tens

Coming off the higher-rep work in the Anchor and going straight to heavier weights in the Leader may be a bit jarring for some folks. So instead, stick with 10 RMs and see how much higher you can take it each week. To accommodate for the aggressive increase in weight, the number of half-sets is gradually reduced.

The higher reps potentially makes this a more joint-friendly option, too – but certainly not an easier one. Make sure to start with a very comfortable 10 RM so you don’t hit a wall in the second week.

Assistance Work

During the Leaders, I had the most fun working with supersets and giant sets, especially the old school 1970s bodybuilding kind. So if I had to suggest one format, that'd be it. But of course, you can use any format you like, standard 3x10, even Gironda-style 8x8, or just get in like 100 reps of this and what over the course of the session. Pick what you like or what works for you. For the last weeks, I'd switch to something with a slightly higher intensity, like regular Max Rep Sets with short rest or even Myo-Reps, to make sure you're actually going to or getting close to failure.

If you get in a lot of volume in your (optional) conditioning days, you might want to reduce the direct assistance on your main training days and stick to more prehab-type movements such as Face Pulls.

Or, as we've already started stealing from 5/3/1, use the Boring but Big assistance volume recommendations. Also, uh, buy the book.

Final Words

I hope some of you find this planner and write-up useful. If you find any issues with the spreadsheet, please do let me know, and I'd be happy to fix it. And if you decide to use this to build your own plan, I'd love to hear from you about what went well and what didn't. If you have any questions, please don't hesitate to to ask!

However, If you'd like someone else to do all the thinking for you, and get you stronger and thiccer and taller, I'd highly recommend you consider hiring Cody as a coach. It's well worth it, even if you don't compete. I know I've said it before, but writing him about online coaching in 2019 was without a doubt the best training decision I ever made, and I wouldn't be anywhere near where I am now in terms of both gains and training knowledge without his guidance, both during and after the actual coaching.

As I don't want to get too complacent with my lifting, I'll be taking a short 12-week break from GG to finally do something I've been putting off for years: run Brian Alsruhe's Mass Builder program. But fret not. Once that's done, I'll be back on General Gainz with a newfound appreciation for rest periods and, who knows, maybe some cool and horrifying ideas about how to make training suck more.

Disclaimer

This is neither medical nor financial advice, make sure you’ve been cleared by a doctor or medical professional before embarking on an exercise program, go to the bathroom before you squat, any training decisions you make are your own, don’t do false-grip Decline Benching without a spotter, you know the drill.


r/gzcl • • Mar 08 '20

Just hit 405lb Squat @154lb

149 Upvotes

r/gzcl • • Feb 20 '23

Mod Announcement Jacked & Tan 2.0 is now free on Boostcamp!

Post image
143 Upvotes

r/gzcl • • Apr 22 '20

GZCL TLDR quick guide

139 Upvotes

There has been some confusion around programming, exercise selection and whether or not reverse band lat pull downs done with a mixed grip and straps are a good idea. Ive copied and pasted from blog posts, reddit posts and added a dash of my own 2c into some of this.

Please read this, and do further reading on your selected program before posting questions and routine critiques as you might find that your question has already been answered if you look hard enough.

The GZCL method is foremost a power lifting set of principals or method that youcan tailor to your own program, or Cody's programs to fit your needs.

http://swoleateveryheight.blogspot.com/2014/07/the-gzcl-method-simplified_13.html

GZCL Method

using the below guidlines for T1, T2 and T3 to build your own program, targetting your weakpoints, lifts you want to perform, days you want to train etc.

The first step in building your own program based on the GZCL Method is to envision yourself as if you were a pyramid. The weight you can lift is its height and your work capacity its base. Are you currently more like a tower, lacking capacity, in other words volume? Or are you flat and broad like a mesa, lacking maximal strength?

The goal is to refine your training into a balanced approach and build your abilities like a pyramid- because after all, a pyramid can only be as tall as its base. In this approach you can become stronger and build muscle in similar relations.

Definintions

Training max or Goal Weight

Your training mac is an every day 2-3 rep max, not a 2 rep max if all the stars align, your shoe is laced up just right and have enough chalk on your hands. Its something you can walk in an confindently do on any given day.

T1 Defined

The first tier is where our competition movements and foundational lifts reside. These are a lifter’s primary means of measuring improvement in limit strength and as such are at the top of the GZCL pyramid∆ The first tier can also include other movements that the lifter determines to be of equal personal importance. An example of this would be the front squat or overhead press. Many lifters see these as tools to measure their strength and for that reason the T1 can include lifts other than “the big three.”

T1. Your Main Movement for the day: Squat, bench, deadlift, overhead press, or any other compound barbell or dumbbell movement. This us usually a competition or high-skill movement. You will perform this movement first before the movements in your other tiers.

2. The Intensity Range for Your Main Movement: 85 to 100% of your Goal Weight.

3. The Volume Range for Your Main Movement: 10-15 total repetitions, broken into your desired set/rep structure. Typically these are one to three reps per set. Very rarely should it be programmed above that.

T2 Defined

The 2nd tier is ultimately the base of our strength. Without it the T1 has nothing to rest on in terms of muscular endurance or general strength. The T2 can be built with either competition movements or related accessories. If the lifter is already very proficient in the competition lifts then making that movement a T2 accessory will typically result in less progress than opting for an accessory that specifically targets the individual's weakness on that lift.

  1. Your Primary Accessory for Your Main Movement: This is a lift that builds the Main Movement of your T1. You do this after you have completed your T1 sets and reps.

  2. The Intensity Range for Your Primary Accessory: 65-85% of your Goal Weight.

  3. The Volume Range for Your Primary Accessory: 20-30 total repetitions, broken into your desired set/rep structure. These typically fall into the 5-8 reps per set range. These should rarely be programmed above 10 reps at a time.

The best T2 accessories, besides more of the T1 lift for those lacking technical proficiency and practice, are the following:

Squat:

  1. Front Squat (or SSB Squat)

  2. Pause Squats

  3. Single Leg Work

Bench:

  1. Close Grip Bench.

  2. Long Pause or Sling Shot Bench (If available.)

  3. OHP or Incline Bench

Deadlift:

  1. Deficit deadlifts

  2. Paused Deadlifts

  3. Front Squats (or SSB Squat

T3 Defined

Accessories in the T3 are near limitless. Here rehabilitative and prehab movements sit beside isolation “bodybuilding type” movements for the purpose of injury prevention, movement correction, improving muscular endurance, and increasing the size and strength of specific muscles and muscle groups. The T3 is the base of all strength. It is where we identify and target problem areas regarding past and potential future injuries, as well as target which specific muscles need assistance in order to help progress T1 and T2 lifts.

  1. Your Secondary Accessories for your Main Movement: These are movements that build the muscles involved with completing your T1 movements. These are done at the very end of your workout. Choose 1-3 movements in this tier for each workout.

  2. The Intensity Range for Your Secondary Accessory: 65% or less of your Goal Weight (if using a major movement in this range), or a weight that can be completed for 8-12, sometimes more, reps at a time.

  3. The Volume Range for Your Secondary Accessory: 30 or more total repetitions for each movement performed in your Third Tier. Set up in whatever set/rep structure you prefer.

  4. Common choices are: 3x10, 2x15, 4x8, and 3x12. These should be rarely programmed below eight above 15 reps at a time.

My top T3 pics by body part: (By no means an exhaustive list of options...)

Pecs: Flyes, Push Ups, DB spoon press.

Shoulders: Lateral raises, single arm overhead DB or KB press, rear delt flyes,front plate raise and behind the neck press. 

Triceps: Cable triceps push downs and overhead extensions. Body weight dips,diamond pushups, and skull crushers. 

Biceps: Ez bar curl, DB hammer curl, Incline DB curl, Machine preacher curl,and cable rope curl.

Back: Body weight pull ups, v-grip lat pull down, rope lat pull down, wide grip lat pull down, v-grip cable row, chest supported row, and hyper extensions.

Abs: Planks, ab wheels, and Pallof presses. Hanging knee raise and leg raises. 

Quads: Leg extension (seated and laying), sissy squats, and box step ups. 

Hamstrings: Leg curls (all types), GHR, lunges, and RDL. 

Glutes/Hips general: Lunges, abduction/adduction machine, hip thrust,and kick back machine.

Calves: I don’t do calves but I heard from Arnold donkey calve raises are good. 

All of the GZCL programs are based (sometimes loosley) around these three Tiers, even the new General Gainz has Tier 1 in the 6 to 15 rep range, T2 in the 18-40 Rep range, with some cross over but at its bare bones resembles the oringal GZCL method.

https://www.reddit.com/r/powerlifting/comments/3051ti/reddits_compendium_to_overcoming_weak_points/

Amrap Sets

As Many Reps As Possible.

Rep Maxes

Working up to a rep max with 1-2 reps left in the tank, IE working up to a 10 rep max.

Max Rep Sets

Set(s) of AMRAP with minimal rest times (usually less than 90 seconds.)

For example a set of MRS@20 Reps for Ez Bar Curls, you Hit 20Kg for 20 reps leaving 2 in the tank, you take minimal rest and hit the lift again with the same weight again leaving 2 reps in the tank, because of fatigue from the previouis set and the training session, you may evenn superset your T3, leaving you only able to hit 18 reps, following that 17 reps on set 3 and 14 on set 4. (20/18/17/14)

PROGRAMS

GZCLP

Linear progression for beginners. Performed 3-4 times a week as full body or upper lower workouts. The purpose is to dial in form on the squat/bench/deadlift without focusing on much else.

https://thefitness.wiki/routines/gzclp/

https://old.reddit.com/r/Fitness/comments/44hnbc/strength_training_using_the_gzcl_method_from/

https://www.reddit.com/r/Fitness/comments/6pjiwd/heres_a_quick_summary_of_the_gzclp_linear/

The Rippler

A 12-week GZCL program optimizing bi-weekly undulation in intensity and reps per set.

A four-day basic upper/lower split sustainable progression model of bi-weekly undulation in intensity and reps per set. Volume in the T1 and T2 still closely match GZCL guidelines but instead of weekly increases in weight it follows a “Two-Up, One-Down” model with 5% additions on up weeks and 2.5% decreases on down weeks. A longer progression timeline sure, but this affords the opportunity to amass greater volume at intensity, thereby building ability more sustainably with a longer and more consistent upward average slope.

UHF

A 5- or 9-week GZCL program adopting a Daily Undulating Periodization model of progression. Ultra High Frequency. Full body multiple times per week. Lots of variety within movement-types still.

GZCL UHF is programmed as a five days per week program, but can be used with as little as four days and as high as six per week, using three-week blocks for both T1 and T2 movements. The T1 resets base intensities and volumes every fourth week. The T2 progresses in the same three-week blocks but with other controls in place to maintain progression sustainability from weeks four through nine. In the UHF model greater importance is placed on the effort of the T1, which is accomplished by AMRAP sets every workout. T2 movements experience AMRAP sets every fourth week because the decreased T1 intensity necessitates an increase in overall effort. Using an AMRAP in the T2 accomplishes this task.

http://swoleateveryheight.blogspot.com/2016/02/

Jacked and Tan

General Strength and size program, block periodization working through the tiers in blocks rather than training everything concurrently. (working down from high reps to low and up from low intensity to high.)

http://swoleateveryheight.blogspot.com/2014/06/15-weeks-of-jacked-tan-results.html

J&T2.0

A 12-week GZCL program geared towards hypertrophy and strength. It starts with lower intensities/higher volumes and tapers to high intensities/lower volume. A condenced version of the original Jacked and Tan.

Linear block periodization (mostly) 4x Weekly training sessions. An upper/lower split with T2 and T3 back work done on either type of day, up to lifter preference. A fifth day is optional.

http://swoleateveryheight.blogspot.com/2016/07/jacked-tan-20.html

https://www.reddit.com/r/gzcl/comments/89jsp6/guide_jacked_tan_20_jnt_20/

Deadlift Wave Forms

A 10 or 12 week progression on the deadlift. can be worked into other programs such as UHF/RIPPLER etc. Focusing on using rotating Deadlift variations to improve your normal stance deadlift.

http://swoleateveryheight.blogspot.com/2016/11/extended-deadlift-wave-formulas.html

Bench Press Wave Forms

Much like Deadlift Wave Forms this training plan progresses through "waves" (3-week sections) of training that put an emphasis on variations through each tier. These variations of the main lift are rotated through the tiers in a fashion that starts and ends with specificity. Focusing on adapting to different weak points.

http://swoleateveryheight.blogspot.com/2016/12/

VDIP

A GZCL Program where progression is set upon volume performed at certain intensities. Using MRS across all tiers, once a certain volume bench mark is earned you increas weight. Auto regulatory program.

http://swoleateveryheight.blogspot.com/2016/11/

All levels. Beginners are well suited to GZCLP and The Rippler. Intermediates do well with most anything like Rippler or Jacked & Tan 2.0, but honestly I like it when they take the plunge and try to build something out themselves. Self experimentation in the gym can be one of the most fruitful endeavors for a lifter. UHF is much more of an advanced plan, but many use it successfully. Likewise for VDIP.

General Gains

Oringal Blog Post

https://www.reddit.com/r/gzcl/comments/aqkdgo/happy_gday_gainerz/

100 Days

http://swoleateveryheight.blogspot.com/2019/06/

200 Days

http://swoleateveryheight.blogspot.com/2019/10/

300 Days

http://swoleateveryheight.blogspot.com/2020/


r/gzcl • • May 22 '19

Don't know which T2s and T3s to pick? Look at these guides!

134 Upvotes

So many program reviews give 0 information about his or her weak points, and just assume any exercise will work. This obviously won't hold true, you get better results from targetting your weak points than you'd get from targetting strong points. For example, doing rack pulls can be great if you stall at the top of your deadlift and aren't starting with a rounded back, but it's gonna do shit for you if you can't even get your weights off the ground.

But how to know what your weak points are and how to target them properly? In contrary to the believes of some people, it doesn't matter a lot which muscle "feels" to be doing most work. I never felt my quads work during squats, but they were my weak point there. Luckily, some smart coaches, and some guys from r/weightroom (including great coaches) put out great content.

RECORD YOUR LIFTS and see how your lifts compare to the videos/guides below. Don't go by feels.

Juggernaut training systems adressing weak point series, look at this especially for squats!

Diagnosing weak points of the deadlift from Strongerbyscience.com with a great test to check what causes your lower back rounding from the floor!

Diagnosing weak points of the squat from Strongerbyscience.com

Diagnosing weak points of the bench press from Stongerbyscience.com

Weak point compendium from r/Weightroom

Do not make your strong points your weak points by completely neglecting them, keep some T3s and T2s (if you got more than 1) to focus on your strong points as well.


r/gzcl • • Apr 08 '19

The nightmare happened, I fucked my back while deadlifting.

127 Upvotes

I have been running GZCLP for a few month now and it has been working great so far, but yesterday my worst nightmare happened.

I was always cautious about doing deadlifts. I watched several videos on the right form and always performed it in front of a mirror so I can watch myself while deadlifting. I started with a pretty low weight and have always felt like I could do more. This Sunday I reached 92,5kg in my progression. I was doing the first 3 sets of 3 without any problems and I still felt I could hit some more reps on every set, but on my 4th set while keeping my lower back straight it basically collapsed, seemingly out of nothing, and me and the bar dropped to the flower. Immediately the pain started and slowly got worse. I started sweating and at first tried to act like nothing happened, hoping the pain would go away after a few minutes(In my mind I kind of knew this wouldn't be the case but I didn't want to admit it to myself at first). After a while I knew I fucked up and it wouldn't get better, so in pain I slowly walked home and went to the hospital. The doctor didn't want to do an MRI and said it would probably get better in the next three days, and up until now he seems to be right as the pain is already A LOT better after only one night.

I'm still going to stop lifting until at least the end of this week. My question now is how should I approach starting again? I don't want to start with 92,5kg of course and I should probably start with a lower weight and work myself up again, but what might have been the cause of all this? As I said I was pretty cautious and didn't push myself to hard(at least that's what it felt like to me), but it still happened. What precautions should I take so this doesn't happen again in the future and how do I spot this the next time before it happens? Every help is highly appreciated as I am pretty afraid to do deadlifts ever again right now.

Edit: Thanks for all the advise!


r/gzcl • • Oct 15 '20

250kg deadlift for 3, was my max just 3 months ago!

122 Upvotes

r/gzcl • • Jun 30 '20

I built a GZCL mobile app during the quarantine

105 Upvotes

Hey guys. What started as me just trying to implement the GZCLP program to test out a new database(for a different app) turned into building a full app. Once I got started I couldn't stop.

Little video: https://imgur.com/a/64y2OZX

Programs included:

  • GZCLP

  • Jacked & Tan 2.0

  • UHF 5 week/9 week

  • VDIP

  • The Rippler

It still needs some work, but I wanted to go ahead and open it up and see what you guys think.

You can get the app here: iOS -- https://apps.apple.com/us/app/id1517032809

Android -- https://play.google.com/store/apps/details?id=co.braindead.gzcl

My next feature is going to be the ability to add/swap exercises. I'm open to any feedback.


r/gzcl • • May 13 '19

Clank - App Update

102 Upvotes

r/gzcl • • Oct 10 '19

200 Days of General Gainz

Thumbnail
swoleateveryheight.blogspot.com
95 Upvotes

r/gzcl • • Jul 13 '20

Thanks to yall's feedback the gZCL app is (mostly) bugfree and released now!

92 Upvotes

Hey Guys. This is a follow up to the beta release post from a few weeks ago: https://www.reddit.com/r/gzcl/comments/hilalp/i_built_a_gzcl_mobile_app_during_the_quarantine/?sort=confidence

In the last 2 weeks, 111 people downloaded the iOS version and 115 downloaded the Android version! Wow, way more than I expected! I got a bunch of great feedback from the early testers.

This is the list of things I've fixed or added based on the feedback from you guys:

  • Swap exercises

  • Delete exercises

  • Add/delete sets

  • Round by 0.5

  • Fixed wrong exercises in Jacked & Tan

  • Fixed lb <-> kg conversion

  • General cleaning up and performance improvements

I'm still looking to make more improvements so I'm open to any suggestions you guys have.

You can get the app here: iOS -- https://apps.apple.com/us/app/id1517032809

Android -- https://play.google.com/store/apps/details?id=co.braindead.gzcl

I have one favor to ask. If you like the app could you give it a review? It's so hard to get visibility in the app stores because there are a million other apps but every review helps a lot. Thanks!


r/gzcl • • May 20 '21

Allright…495x4 at the end of a workout. I know there is room for improvement but let me have it!

89 Upvotes

r/gzcl • • Jan 01 '23

Quality Content / Research ANNOUNCE: GZCLP+ 3-6 Day (12 Week) Spreadsheet - v5.0 by Blacknoir (Oh hi there version)

87 Upvotes

(Update 4/15/23)

Hey folks!

So....it turns out that it's much, much easier for me to keep track of and modify the single versions of the spreadsheet, vice the huge massive beast.

Accordingly, I'll be referring to this below thread for any and all updates moving forward.

https://www.reddit.com/r/gzcl/comments/1207bs7/announce_as_requested_single_spreadsheet_versions/

If you find any bugs, please submit them to me via DM and/or the thread above. It's very helpful to me if you include the following information:

  • Version you're running

  • Program you've selected (e.g. 3D GZCLP, 6D JnT)

  • Week you encountered your error on

  • A Dropbox link to your program if possible

Please please please follow the instructions on the start page. :)

Also, please to be following me on TIkTok - I post weekly videos of my fat belly attempting meager bench press PRs.

https://tiktok.com/@_useful_idiot_


r/gzcl • • Mar 11 '21

Got new weight, maxed the fuck out. 40kg more than i ever lifted before, got it only on the third, very ugly try. 300kg dealift

87 Upvotes

r/gzcl • • Jun 03 '19

General Gainz Wave LP

87 Upvotes

EDIT: Here's a spreadsheet for the program created by the great /u/K-S-R...thanks buddy! https://docs.google.com/spreadsheets/d/1KbolE3uS64TES9wAD274qIMTCxeidgThTXHdv0c0mNk/edit?usp=sharing

Disclaimer: if any of this is tough to understand or could be better organized, or if you'd just like to see more specific info about something, then just let me know and I'll try to edit accordingly! Also, keep in mind this is a work in progress so I'll tweak things from time to time, bear with me please!

You'll need to know about General Gainz for this to make any sense, so go here first: https://www.reddit.com/r/gzcl/comments/aqkdgo/happy_gday_gainerz/

Hey all!

So some people have been asking me about how I'm structuring my GG. I talked it over with the Sultan of Swole, Mr. /u/gzcl Pants himself, and told him I was planning to make a long, overly wordy post about it. He thought it was a good idea so here we are!

I love GG but one potential problem lifters can have with it is that it's very loosely structured. I thought it was a great idea but had no clue how to tackle it at first. I like having everything spelled out for me. Eventually though, you just need to jump in the deep end, so I did that, using what I've done in the past and judging my starting weights intuitively. So far it's working out really well, well enough that I think I can recommend it without feeling like I'm setting anyone up for failure.

Alright, this is the gist of what I've come up with. It's a 4 month program, utilizing months of 6, 5, 4, and 3 reps for T1 work and 10, 8, 7, and 6 reps for T2 work. This is flexible of course, so if you wanted to do 9, 8, 7, 6 or 10, 9, 8, 7 that's fine, do your thing. 10, 8, 7, 6 is just what I decided on at that time.

Finding starting weights

My starting weights were done from just what I felt I could hit, but I absolutely nailed it, so I'll recommend the same. My maxes at the time I started were:

  • 220kg/485lb squat in shitty sleeves

  • 150kg/331lb bench for a double

  • 272.5kg/601lb deadlift (conventional...I do not pull sumo, but I can be talked into eating butt)

Looking back at my training journal, I noticed that all my numbers for T1 for the 6RM wave were about 81.8-82.5% of my 1RMs at that time. Therefore, I recommend starting your 6RM with 80-82.5% of your true 1RM. If you want to be more conservative and use a TM that's fine, but this worked for me without trouble.

For T2, it'll be a bit more individual due to your work capacity vs mine and all that jazz, but I'll just give a baseline I recommend. I suggest starting T2 work at 70% of your true 1RM. Again, being conservative is fine, but this is what I would do.

Structure

Nothing fancy here, my recommended structure is 4 days a week, something like this:

  • D1: T1 bench / T2 squat

  • D2: T1 deadlift / T2 OHP

  • D3: T1 squat / T2 bench

  • D4: T1 OHP / T2 deadlift

Note that I did not OHP because I hate OHP, I just benched 3-4 days a week, but I know many people who run GZCL do in fact enjoy OHP so it's in there if you want it. Personally, for days 3 and 4 I did CGBP. A rest day between D2 and D3 is ideal if you can swing it.

A sample day 1 in the 6s/10s wave would look like:

  • T1: bench 6RM, then 6 to 9 singles depending on how you feel

  • T2: squat 10RM, then 4x5 to 6x5 depending on how you feel

  • T3: do what you feel you need...I typically did 2-4 exercises for 3x10, usually superset with each other

Personally, I'm dieting as I'm running this now near the end of my 4s/7s wave, so I just keep everything at the standard sets/reps with no extras, but if you aren't dieting I think pushing the number of singles or adding a few extra T2 sets is a good idea.

Rest

For me, I would rest a few min after my top sets, then rest just 1min between all T1 singles or between all T2 sets. The one exception is the T2 deadlift, my rest crept up to 2+min at times, shit is tough!

This is stricter than Cody recommends in the OG GG thread, but that's what I recommend. Try for 1min, if you need more then take it.

Progression

Progression is quite simple. I just added 5kg to my weights each week. I'll give you my T1 deads in the 6RM/10RM wave to illustrate:

  • W1 6RM: 225kg

  • W2 6RM: 230kg

  • W3 6RM: 235kg

  • W4 6RM: 240kg

So that was T1. What about T2? I'll use my T2 squats as an example:

  • W1 10RM: 155kg

  • W2 10RM: 160kg

  • W3 10RM: 165kg

  • W4 10RM: 170kg

So that's week to week progression within the first wave. Now I'll explain how to progress from wave to wave. Moving from a 6RM/10RM to a 5RM/8RM, I would simply start 5kg higher than I started my 6RM/10RM first week. My deadlifts in practice:

  • W1 6RM: 225kg -> W1 5RM: 230kg

  • W2 6RM: 230kg -> W2 5RM: 235kg

  • W3 6RM: 235kg -> W3 5RM: 240kg

  • W4 6RM: 240kg -> W4 5RM: 245kg

T2 squats as well:

  • W1 10RM: 155kg -> W1 8RM: 160kg

  • W2 10RM: 160kg -> W2 8RM: 165kg

  • W3 10RM: 165kg -> W3 8RM: 170kg

  • W4 10RM: 170kg -> W4 8RM: 175kg

Pretty much as simple as it gets. This would continue in the same fashion through the 4RM/7RM and 3RM/6RM waves. But you have to be honest with yourself as well. If it's feeling too easy, maybe add a tiny bit more. If it's feeling too hard, perhaps slow the progression a tiny bit. I've made adjustments to my own numbers, not everything is set in stone. This is just a nice starting point.

Also, if you are well under my strength numbers it could be better to make 2.5kg jumps instead of 5kg. Same as if someone like Dan Green were for some reason running my program. He'd probably take 10kg jumps or more, because his strength levels are insane. Think about it, and choose for yourself.

I progressed the same 5kg on all movements, but progressing with 2.5kg on OHP might be a smarter choice. I don't have that issue because of my aforementioned dislike of OHP.

Judging RPE

This is the same as Cody's recommendations in the OG thread. For me, as long as the set wasn't a pure RPE I'm Gonna Die I would add weight and continue the next week. For me so far, the only time I haven't added weight was actually wave 1 week 1 bench press, because I was working through a shoulder injury. Every other time I've added weight.

Basically, if you think you could have gotten at least one more rep on your AMRAP, I'd go up in weight for the next week.

Wrapping up

I think I covered everything, but if I left something vital out just let me know. Some people might feel bored working in the same rep range for a month at a time. This program isn't for them. Personally, I'm loving coming back each week to try to get better. It's a gradual progression, great for offseason work and just building a massive base. You could probably either run UHF after this into a meet, or just work off a 3-4 week peaking program to peak for a meet. I'll try this myself at some point.

The biggest thing is just, for the love of Poseidon, DO NOT start too heavy. If you don't have a known 1RM, then plug your recent best 3RM/5RM into an online 1RM calculator and get a rough estimate. Starting too heavy is the cause for failure for probably 90%+ of lifters I see wondering what went wrong. Just don't do it.

Anyway, if you have any questions just ask, I'll do my best to respond to everyone when I can. Enjoy!