r/gunreviews • • Apr 06 '13

REVIEW [Review] [FN] FNX-45 Tactical

27 Upvotes

Guess I'll post a thread in addition to my direct response to the request thread. It's no Hickock .45 caliber, but maybe it'll help until someone comes around with a better review. Here's some pics of a couple points I make in the wall-o-text.

All my guns are bought to fill some 'purpose' and this is my go-to .45.

The trigger pull is smooth and the break is clean and consistent. Out of the box you get 4 back straps. Mine came with the smaller ones attached and the first 50 rounds impacted low because I couldn't get a proper grip and broke my wrists down every time. A quick swap to the bigger ones and it drives nails - like center circle, 2" group of 100 rounds at 10m nail driver and I'm no competitive shooter.

I like the raised sights. I don't shoot with a suppressor, but they're very easy to get on target every time more so than any of my other standard sights.

I'm not a huge fan of the slide lock levers. Too small IMO. I prefer something more like an M9. They look Glock-ish and wear your thumbs out if you're locking the slide back all day.

The barrel and slide are somewhat heavy, but nothing that makes it a heavy weapon. It's well balanced; the only thing I think is more balanced is a USP. The lower is light - a silly amount of light. Taking it apart shows just how light the receiver is and how heavy the slide and barrel really are.

I had read reviews about the thread protector coming loose after a couple rounds and, yes, it does. But, after 150rds in one go it was still attached and just needed a re-tightening after shooting. The downside to this is how dirty the protector gets.

Breaking it down is simple. Just like any other pistol except the guide rod and guide rod spring are perma-attached, which makes cleaning the guide rod a little harder unless you take a pipe cleaner for a ride down the spring, but carbon rarely makes it to that part of the pistol anyway. I like that I can lock the slide to the rear and hit the take down lever and ride it forward and off (make sure the thread protector is off first!). None of that contorting HK crap. A couple parts are asses about being cleaned in the trigger group, but nothing awful.

After about 1,000 rounds the barrel started to show cosmetic wear; my only real gripe so far.

Haven't fired with a reflex sight yet. Still trying to track one down I like.

The box (which is nice and I'm certain you've seen before elsewhere) comes with 3 mags, tools for the built in reflex mount and spacers for certain brands, 4 back straps and a lock. Everything fits well and you can move the parts in the bag around and they velcro in (and stay where you put them). A pouch that originally held the lock is suppressor size, so you can easily store it with the weapon.

The 15rd mags though...ugh, thumb killers. I have ~1,000 rounds into 1 mag and in my manliest of time saving moments have only rocked 12rds. Usually 10 get in before it becomes a burden and easier to reload after 10 than fire off 15. I don't know if they'll break in any time soon, but if you want 15rds I'd recommend one of those LULA things.

Never had anything remotely resembling a jam or malfunction, but every once in a while (like 1:50rds, so more often than liked) a casing will eject straight back and hit your face. That's annoying as balls and I'm concerned to where it will hit if I had a reflex on it.

The big question: Is it worth a grand? Ehh...it's a great gun but $1,000 is expensive as all hell for a pistol (and good luck finding one for that nowadays). You can find other similar systems like an HK Tactical and get similar results. The ability to easily mount a reflex sight is a big selling point against other .45s with threaded barrels and raised sights. Would I trade this for one of those now that I've shot it? No. If you have the money to throw at an FNX it'll seem worth it when you shoot. If you feel the need to save up money to get one you may develop buyer's remorse over such an expensive weapon.


r/gunreviews • • Apr 25 '14

[REVIEW] CZ-75b (9mm)

23 Upvotes

My first pistol purchase ever was a CZ-75b (9mm).

10 years and 15+ pistols later, I look back and realize that my first pistol is, in many ways, the best purchase.

The CZ-75b has an all steel frame and slide which has a profile very similar to that of the Browning Hi-Power. Many people refer to the CZ-75 as a Hi-Power clone. While there are similarities, it is a very different pistol. I have read that the CZ-75b used to be one of the most fielded side arms for European police and military, so by all accounts, this pistol design has weathered some hard use over the years.

PROS:

  • All steel construction for both frame and slide. It's rugged and once you run out of ammo, you can use it as a hammer.

  • The CZ-75b is the only 9mm pistol that can be carried in a cocked-and-locked configuration OR chambered with the hammer down (half-cock) for a double-action (DA) on the first trigger pull and single-action (SA) on subsequent pulls. It was for this reason that Colonel Jeff Cooper was a fan of the CZ-75. It was one of the few pistols chambered in 9mm (the Euro-Pellet, as he referred to it) that he cared for.

  • It has a very well made trigger. The trigger pull in both DA and SA modes is really good compared to other semi-auto pistols I have fired.

  • CZ makes a .22lr caliber slide called the Kadet which makes for a fantastic understudy for the CZ-75b in 9mm. Just remove the 9mm slide and replace it with the .22lr slide and you are in business. Why would you do this? One might do this to keep costs down. It is good to practice with .22lr to work out a flinch or buck that you may have developed from shooting 9mm. Swapping out the slide allows you to keep the same manual of arms. In other words, the pistol operates the same way (think safety, trigger pull, mag release, etc). Also, .22lr is a great way to introduce new shooters.

  • My CZ-75b has not had any problems with any factory ammo I have fed it. While these days I mainly feed it handloads, I have shot hundreds of various types of hollowpoint defensive ammo through it with zero failures to feed.

  • I have found the CZ to be a very accurate pistol. I find it to be shoot more consistent than the Glocks and XD-9 (and I have owned both). That being said, I do think that my Browning Hi-Power is slightly more accurate than my CZ.

  • Rugged, low profile combat sights that you know won't break off if you were to rack the slide using the rear sight against another object.

CONS:

  • All steel construction for both frame and slide. Yeah, it's rugged... but it's heavy. The CZ used to be my everyday carry pistol. I have since given that up and now carry an XD-9 Service model. With the exact same loadout (16+1 rounds), the XD-9 is 8 ounces lighter. That's 1/2 a pound (or almost 1/4 kilo for everyone else in the world outside of the US). :-) Frankly... many days I just carry a S&W hammerless J-frame... so this is not that much of a "con" for me.

  • The slide is unique in that the slide rails ride under the frame, rather than over the frame the way most pistol slides are designed. For larger handed people, this may result in slightly less purchase for quickly racking the slide.

  • The weak point on a CZ-75 pistol is the slide stop. After 1500-2000 rounds, one day I pulled the trigger and heard a strange noise. I soon realized that the slide stop had broken into 2 pieces. I was able to fix the issue with one call to CZ-USA. I have put at least 1500 rounds through the pistol since with no issues... but it is always good to have spare parts on hand for any firearm. If it is mechanical... it can break and every firearm has weak points.

In summary, as my first pistol I accidentally picked one of the best handguns on the market for the price. It is a good looking pistol. It was a great price (approx $350). Great fit and finish where it counts (and I don't count the tool marks inside the frame). They have gone up in price over the years as more people learned about them but they are still a good value. Many pistols later, it is still my favorite.


r/gunreviews • • Apr 04 '13

REVIEW Remington SPS Tactical .308; First Impressions and Range Report

21 Upvotes

First Impressions and Range Report of the Remington SPS Tactical

Update: I'll try and get some photos up since I got a request for them, I don't have a camera and the cellphone doesn't seem to be able to take very good pics. I'll see if I can borrow my friends and do it when I have time.

Update 2: Photos Added

Update 3: (4/14/13) Unfortunately, at the time I wrote the article, I did not have a bipod for this rifle. As soon as I mounted a bipod, the accuracy with the same ammunition changed a little. After looking the rifle over, I realized that the Hogue Stock is too flimsy to resist the weight of the gun. The free floated forend gets bent until it contacts the barrel when a bipod is used. When i shot off of the sandbags, the way the shooting benches were set up I had pulled the bag closer to raise the rifle where I needed it, which took the weight off of the front of the forend and kept it from contacting the barrel. This is not a huge deal at 100 yards, but it was amazing to see just how much of a difference it made on the paper. It added about an inch to the group size. I think perhaps because the stock never contacts the barrel in the same way each time the trigger is pulled it removes some of the consistency offered by the more rigid heavy barrel. It is not a huge issue for most practical purposes, however I have put the rifle up for sale on gun broker and plan to buy something a little nicer. My dislike of Remington products sadly continues.

First off, I am not a fan of Remington, which says something about this purchase.

While Remington is often thought of as the standard to which others are measured, my experiences with Remington have been wholly awful. The first Remington I ever purchased was a 597. I cleaned it and brought it out to the range and it jammed every single time. Being somewhat new to shooting, I had some more experienced friends take a look at it. Still, it jammed every single round. Being the type of person that, for whatever reason, never returns firearms, I paid someone to fix it. I paid almost what I paid for the rifle, and now it works just fine thanks to a few Volquartsen products. A friend got a new 870 that couldn’t pop the primers on any brand of shell. Another friend got the Target Tactical and it fell apart as he picked it up out of the box for the first time and it never seemed to hold a zero. The ammunition I’ve gotten from Remington has performed worse than Wolf brand.

Anything old I encountered was great, but anything five years or less seemed to be garbage. I’m sure there are those that will say differently. Regardless, that’s a lot for one person to come across to be considered any kind of fluke.

I’ve written some articles about the recent Albany Rally and other gun rights related topics. I mention it only because it was writing that had caused the chance encounter with this rifle. I had stopped by my favorite gun shop, The Civil Armory, where I sometimes bring my work to get it critiqued by the owners. While we were discussing what our next moves were in the fight for gun rights, I caught a glimpse of the Remington SPS Tactical.

I can't lie, the looks won me over.

When I first saw it, I thought “Scout rifle” however it is not drilled and tapped for a forward mount, but for a traditional location. Still, it had that handy sort of “go anywhere” look to it. It has a nice heavy barrel, and yet manages to be extremely well balanced and feels much lighter than its factory claim of seven and a half pounds with nothing on it. While a lot of people complained in online reviews about the Hogue stock, I thought it was awesome. I lightly bounced the rifle in my hand, the rubber is soft and yet seems to resist abrasion as I have a tendency to scratch up guns within only a few minutes of owning them. I ran a dollar bill between the barrel and the stock and there were no points of even light resistance all the way down.

I put the rifle down, though. I was not going to buy anything Remington, since I had had so many bad experiences with their products. The owners and I continued to talk, but once there was a little lull as a few customers came in that handy, well balanced feel called to me again. I picked up the rifle and placed my hand on the bolt lever. Once I unlocked the bolt it immediately fell completely open with no resistance. I ran the action a few times and it was smooth. I checked out the trigger, and while I can’t say that I am experienced with bolt guns as I’ve never owned one, the trigger appeared to be user adjustable, had little to no creep and broke very decisively and crisp. Yeah, but it’s a Remington, I thought.

Still, seeing that Remington has for so long been such a cornerstone, I wondered if maybe they were about to redeem themselves in my eyes. I looked up some online reviews and saw few complaints about the rifle. By the end of that little visit I bought the gun.

At first, I was second guessing myself. How often will I get out to the range? Do I really need this thing when I can already shoot 1” or less at 100 yards with my FNAR? Shouldn’t I be spending the money on something more important, like presents for my girlfriend? Oh wait… no… that was what my girlfriend said. No, I’m kidding, she thought the rifle was a lot easier to handle than the FNAR and liked it.

Cleaning

Cleaning it and dissembling it was pretty easy. My Beretta CX4 Storm comes apart and goes back together in seconds, but my FNAR is about twice as much of a pain to clean as changing my car’s oil outside in the middle of winter. The Remington SPS Tactical sits somewhere between those two in terms of ease of maintenance.

Off to the range.

I bought a TPS one piece rail, which sat flush and perfect as I set the mounting screws. All I had was a 4.5-14X40mm Nikon Buckmaster scope to mount. It’s not a terrible scope, but at distance the targets tend to darken a bit. I will say that using Burris Signature Rings with the plastic inserts helps to better align the scope and the picture is brighter. It makes a scope seem more expensive than it is.

I took the scoped rifle out to the awful indoor range; Davis Shooting Sports. The range is actually quite nice but the workers make the experience as excruciating as they possibly can. I set up a couple of little sandbags to rest the rifle and used a laser borescope to get close to on-target. After three shots, I was ready to see what kind of accuracy I could get.

In honesty, my first shot missed my target by several inches, however that was all me and not the rifle. What was nice to experience, however, was how little recoil was felt during the shot. My friend, who I managed to finally convince to get his own rifle, owns a Kel Tec SU 16 and the SPS kicks only slightly more than the Kel Tec. With Kel Tec’s harder butt plate, and the SPS’ soft, recoil absorbing pad, my friend actually enjoyed shooting the SPS a little more than his Kel Tec. Granted, he is still learning how to properly mount a rifle, but I think the pad makes that process a less painful endeavor as he often complains of the sting he experiences when shooting his Kel Tec which is chambered in the much lighter recoiling .223/5.56 cartridge. I’m trying to get him to understand where the pocket of his shoulder is, but he’s a stubborn one and will figure it out when he figures it out.

Anyway, I got back behind the rifle and tried again for accuracy. My next shot hit the upper right portion of a ¼” dot on the target which sat exactly one hundred yards away. The grin on my face could be seen in the reflection of the Nikon’s glass as I reached for another round.

By the way, if you’re wondering why I was reaching for another round instead of just running the bolt, do not worry, this is not a single shot rifle. There is an internal magazine capacity of four rounds, but the Davis Shooting Sports employees were being so annoying I decided to load them one at a time so they’d leave me alone. There are also some aftermarket ten round box magazine options if you have a competent gun smith available to install the kit, which involves modification to the stock.

Accuracy; phenomenal.

Back to the story; I sent another round down range and it landed touching the edge of the last. I sent another round down range and it hit rather close, as did the following shot. Total three shot group size was .78” at one hundred yards. I had been shooting Ultramax 168 grain boat tail hollow point remanufactured ammunition, and wondered if something a little higher quality would do any better.

Next, I fired a three shot group using Hornady Superformance 150 grain SST rounds. The first shot punched a hole through the ¼” dot of the next target. I fired another shot which touched the edge of my last, and fired another shot which touched the edge of that shot. Total three shot group size measured .52” at one hundred yards.

My friend then fired the rifle, we are both relatively inexperienced with shooting, though he is even more so, and he still managed a 1.35” three shot group having never touched a .308 rifle before. I do not feel it would be pushing the limit to say this is a great rifle for an inexperienced shooter.

With all this being said, the only thing I can really complain about, is not a true complaint. They say that the trigger is adjustable, and I suppose it is, yet there seems very little difference between the adjustments. They claim each turn of the set screw adjusts the pull by one pound. Yet, even after taking the set screw out completely, it did not seem much lighter than the factory setting. Also, while I tend to be very light as I pull the trigger, I can’t help but wonder if firing under stress could put more strain on a trigger that has a hole in it big enough to remove about half the material from its center. However, as far as my current experience is concerned; the trigger works phenomenally and is robust. Creep and over travel are almost nonexistent. I’m sure there are better triggers out there, but for its price point, it is impressively crisp.

What are my next upgrades? Probably nothing.

I’m not sure there is much gun smith work worth doing to a rifle capable of half inch groups at one hundred yards, probably hand loads are a smarter bet than messing with the rifle. In that regard, I think it’s a great buy because you can take whatever money you might have spent on blue printing the action, lapping the bolt lugs, trigger work or anything else and put it towards the purchase of a high quality scope instead.

Final thoughts.

So, do I still have regrets towards the purchase? No. Has Remington redeemed itself in my eyes? Not yet. I am very happy with the rifle, but ran into a stranger at the range who was having trouble with his new 870, which sort of negated my positive experience in terms of how I view the company's quality control.

The fit and finish of the rifle I purchased does make me wonder if Remington is getting back to their older, higher quality ways. Yet, I’ll have to send a few thousand rounds down range before I start to believe this rifle is truly as awesome as it seems.

Hopefully this helps anyone interested in the Remington SPS Tactical in .308. For those interested, there is also a .223 version.

Thanks for reading, Kephra


r/gunreviews • • Nov 09 '14

[Review] [Izhevsk] M44 Carbine

Thumbnail
imgur.com
20 Upvotes

r/gunreviews • • Nov 09 '14

[Review] [SIG Sauer] 556 "Classic"

Thumbnail
imgur.com
19 Upvotes

r/gunreviews • • Nov 09 '14

[Review] [Daewoo] DP-51

Thumbnail
imgur.com
19 Upvotes

r/gunreviews • • Apr 05 '13

REVIEW [Review][FN] FNX 9 Pistol

19 Upvotes

TLDR: The FNX 9 is an excellent performing and affordable handgun. Especially for people with smaller hands and left handed, or ambidextrous shooters.

First, this 10 minute youtube review by Sturmgewehre can highlight this pistol better than I can with a wall-o-text.

Summary: This full sized double/single-action handgun is fully ambidextrous. The magazine release, safety, and slide release can all be operated with the left hand. It also packs an incredible 17 9mm rounds into the magazine. I like the external hammer, short trigger pull, 1913 picatinny rail, and insanely simple disassembly. I would compare this pistol to a Glock or XD in price ($600) and performance, but it has a few options that, in my opinion, put it ahead.

Pros: - Fully Ambidextrous - 1913 Picatinny Rail - Safety De-cocker - Simplicity

Cons: - Non-exsistant Aftermarket (Parts, Accessories, & Holsters) - Quality of the Magazine Release

I have fired over 2000 rounds through my FNX9 and I love the grip and feel. It is much more ergonomic to me than similar handguns such as the Glock 19 and XD 9mm (both of which I have shot). I prefer handguns with an external hammer and thumb safety. As a left handed shooter this gun had everything I was looking for at a price I could afford.

This pistol need a break-in of approximately 250 rounds. Jams and miss-feeds are to be expected during this time. I am pleased to report that after my initial break in I have not had a single jam or miss-feed. My biggest complaints are the quality of the magazine release, safety, and slide release. The shooter may need to pull out an empty magazine by hand because pushing the button does not eject the magazine as smoothly as I would like. The safety lever is plastic and feels toy like and the slide release is small and not very ergonomic. One of my magazines does not always catch the slide after the last round. I have not had any issues with the other 2.

Overall I love this gun and I think the FNX-9 or -45 is a likely candidate to becoming the next service pistol for the US military.

EDIT: Spelling


r/gunreviews • • Nov 09 '14

[Review] [Izhmash] Saiga-109 (Saiga-12)

Thumbnail
imgur.com
17 Upvotes

r/gunreviews • • Nov 09 '14

[Review] [I.B.M.] M1 Carbine

Thumbnail
imgur.com
17 Upvotes

r/gunreviews • • Nov 09 '14

[Review] [Daewoo] K2/AR-100

Thumbnail
imgur.com
17 Upvotes

r/gunreviews • • Apr 08 '13

REVIEW [Review] Mosin Nagant

17 Upvotes

The Mosin Nagant is a rifle that has withstood the test of time. Although it is not pretty or refined, it is a good value, selling for around $150. This rifle shoots a heavy-hitting 7.62×54mmR. Interestingly, at the time of this review, this is the only cartridge I can still afford to buy in bulk ($0.28 per round).

Mosin Nagant Wiki Page

There are a million reviews for this rifle on YouTube so please link to some of the good ones in the comments!

Pros: - Inexpensive - Inexpensive Ammunition & Availability - Aftermarket Accessories

Cons: - Condition (Age & Use) - Safety

This rifle is a blast to own. It's cheap to buy and cheap to shoot, and at the end of the day if I don't clean it I don't feel bad. The trigger pull is pleasantly light, but feels squishy. Accuracy at 200 yrs is good enough but could be better if it wasn't for the crude sights.

Sometimes the bolt doesn't fit the receiver well and tends to stick when cambering or ejecting rounds. Before buying a Mosin Nagant check to see if the serial numbers on the bolt and receiver match. If they don't check to see if it can chamber and eject a round smoothly.

The worst thing about this gun is the safety. It might as well not even have one. To safety the rifle, pull the bolt back by hand and twist. It doesn't sound hard, but only Hercules can do it. It is so difficult that I have to brace the rifle against the ground or other hard object in order to get enough leverage. Not something I want to be doing with a loaded gun! For hunting I would carry this gun with an empty chamber instead of using the safety.

If the looks and feel are an issue, the Mosin can be upgraded with aftermarket parts. Given the rest of the pros, there is almost no reason to not own one.


r/gunreviews • • Dec 04 '14

[Review] [Armscor] m200 .38 special revolver

16 Upvotes

Just got back from the range with my new Armscor m200. I am fascinated by inexpensive, but reliable guns. I found some online reviews of the m200, after seeing it for so cheap on several web sites. Right now most major sites have it for $190 - $230. So I ordered one. I have an FFL in my area that does the transfer for $20. I want .38 special for my wife to start learning to shoot. I figure a gun without brass flying out will be easier for her to learn. Total cost of the gun was $229.99.

This is one ugly gun. The finish is parkerized. As such there is no reflection off it at all. It is a flat greenish dark grey. The grips are industrial. They work, but in the future I may put on some wood. There is only a small rock island armory badge on the side of the frame. The rest of the lettering is stamped into the metal. Shooting this gun is a pleasure. Single action is crisp and light. Double action I hope will loosen over time. It is hard to feel where in the trigger stroke you are, and a few times the gun fired before I was expecting it. That being said, I was able to make 3" groups using finocchi ammo at 25 feet standing. Not bad. The gun does shoot about 3 inches high for me. I am going to try to put some red nail polish on the front site and try again. Empty ejection is an issue. The round closest to the frame gets caught up on the grips, and required manual remove almost every time. Under stress a tap of the cylinder will release it. I will try again with a fully cleaned and lubed gun.

One other thing I do not like is the sound of the gun. When closing the cylinder, there is no satisfying click that is on my other revolvers. The can be looked at as a feature, as there is little sound to give away you have loaded or reloaded your gun.

All in all, I am glad I bought it. A nice reliable firearm for about $200 new. They also have a 2" snubby version but I can't find that in stock at any major site.

Let me know if you like this review.
Some Pics


r/gunreviews • • Nov 09 '14

[Review] [Izhevsk] M91

Thumbnail
imgur.com
16 Upvotes

r/gunreviews • • Nov 09 '14

[Review] [Iver-Johnson] TP-25

Thumbnail
imgur.com
16 Upvotes

r/gunreviews • • Apr 14 '13

REVIEW FNAR Review and Range Report

16 Upvotes

FNAR Review and Range Report

Company: FN Herstal Caliber: .308 Action: Semi automatic Magazine Capacity: 5, 10, 20 Barrel Style: Heavy, light, fluted Barrel Length: 20”, 16” Twist Rate: 1 in 11” Accessory Mounts: Top rail for scope, three rails at forend Sling Studs: 2 at opposite ends of stock Design Based on: Browning BAR Hunting Rifle (not the automatic weapon from World War Two)

Background:

I have owned a 20” Heavy Barreled FNAR for about two years now. I don’t get to shoot as often as I’d like, so I’ve only put about 1000 rounds through the rifle to date. Most of that was done at 100 yards, but some of it was also done at 250 yards. I tend to “put my rifles to work” when I go shooting. I like to shoot in different conditions and have shot lying in the snow, in the dusty dirt on a dry hot day, as well as in the mud and in the rain.

Fit and Finish:

Overall is very good.

The stock feels cheap and “hollow” however I think we can all agree that this is simply how plastic stocks feel.

The barrel is very substantial and the crown is recessed nicely.

The finish is relatively tough and resists scratching.

The action is smooth as it cycles with little to no play.

The trigger is smooth and light with a crisp break, one of the best I’ve felt and better than my Remington SPS Tactical.

The magazines are like works of art. The metal is thick and substantial, probably the best magazine I have ever seen. However, for whatever reason, you can’t disassemble them, which makes serious cleaning impossible.

Accessory Mounting:

The top rail is solid, however it is not long enough for mounting night vision if one desired. The 4” rail located at the bottom of the forend is useful for bipods that attach to a picatinny rail, but there is also a stud for mounting regular bipods as well. The side rails are also 4” and have a slight angle, locating them at about the ten and two o’clock positions, which I prefer for locating a flashlight comfortably.

An offset optic could be very useful for a rifle like this, if that sort of shooting is your thing.

Handling:

My heavy barrel model is very front heavy, especially due to the stock being so light weight. Since my intention is to use it for precision work, a heavier stock would be worth the extra weight to bring better balance to the gun in my opinion, especially when having to shoot off hand or in awkward shooting positions.

With 20 round magazines available where legal, the 16” Light Barreled version could very well serve as an excellent, and still very accurate “battle rifle”.

Reliability:

With the Short Stroke Gas Piston system, no malfunctions were experienced with any kind of ammunition. The mixed bag of ammo has included Wolf, Prvi Partisan, Winchester, Federal, Hornady and Black Hills ammunition.

Accuracy:

This rifle shines in terms of accuracy. My rifle is without a doubt a Sub MOA rifle, most 3 shot groups (provided I’ve done my part) have measured between .5” and .75” at 100 yards. The caveat to this amazing accuracy in a semi auto platform that costs about $1300 is that it is load sensitive. For whatever reason, my rifle prefers either 150 grain or 175 grain bullets. Others may have different luck, but 168 grain rounds had slightly less accuracy. I never tried any loads over 175 grains. I have found write-ups from a few other FNAR owners who have reported the same, even with the light barreled version.

Cleaning:

The rifle is a bit tricky to clean. This is definitely a drawback. Check youtube for a detailed breakdown video. It involves a few small screws and a spring in the way that need to be removed to clean. However, with its gas piston system, you could shoot well over a thousand rounds without issue in terms of reliability. Cleaning just the barrel is relatively easy. Also, in fairness, I have gotten relatively quick with the process and don’t mind breaking the gun down and cleaning it fully after every range session.

Availability:

Some are still available on gunbroker and as far as I have seen the prices are not gouged. Gun shops will have a tough time getting them at the moment, though. The rifles are the least of your concern. The magazines are. They are not only scarce, but expensive at $57 for the polymer version and $75 for the all metal. However, due to the demand, most magazines on gunbroker go for well over $100.

Overall Impression:

I can live with the difficult cleaning to get accuracy that beats my friend’s SASS and costs less than half as much. However, magazines going for $75 a pop that can’t be cleaned thoroughly may be a deal breaker for some. I have enjoyed the rifle thus far and still only have the one magazine it came with. Perhaps someday I’ll snatch a bunch up, but definitely not at the $100 or more they have been going for lately.

I would recommend this for anyone in search of a “do all” rifle that can shoot with speed as easily as it shoots with accuracy. If you lean more towards precision, go for the heavy barrel option. If you want a more versatile rifle get the light barrel.

I hope this review has helped people come to a decision when considering the FNAR.

-Kephra


r/gunreviews • • Nov 09 '14

[Review] [DS Arms] StG-58

Thumbnail
imgur.com
15 Upvotes

r/gunreviews • • Oct 24 '13

REVIEW [REVIEW] [OPTIC] EOTech 517

15 Upvotes

Doing it via photo album once again: http://imgur.com/a/vmrEZ

Any and all questions welcomed! Never done an optics review before, so I'm not sure what all information you guys and gals are looking for just yet.


r/gunreviews • • Apr 15 '13

REVIEW [Review] [AK-47] Romanian WASR 10

15 Upvotes

The Romanian WASR 10 may be the red-headed step child of the AK-47 family but it still embodies the AK's legendary reliability and robustness.

Edit: The AK-47 Platform: What I love about the AK-47 is its simplicity and reliability. They are easy to clean, comfortable to handle, and great to shoot. The gas piston operated reloading is nearly impervious to debris and carbon fouling. It is also such an iconic rifle that many gun collectors and enthusiasts feel the AK is a must-have in their collection. I hate the AK sights and barrels. The open sights are crude and frustrating to adjust. The barrels have significant whip (Heres a Vid) when firing, decreasing accuracy and precision. Although this is not uncommon with gas piston systems. When shopping for an AK check that it comes with a scope mount on the receiver and a flash hider. Some AKs have American-made barrels which I prefer. Don't let the furniture discourage you from buying one if you like the rest of it. Furniture can be easily and affordably replaced.

Romanian WASR 10

Pros: - Reliability - Aftermarket Parts & Accessories - Simplicity

Cons: - Magazine Receiver

This is the first rifle I ever bought. 10 years and over 10,000 rounds later I know I made a good purchase. The AK will shoot anything, FMJ, HP, SP, steel, brass, whatever. I have only had one failure, a piece of bullet primer somehow got stuck inside the bolt and jammed the firing pin. The hammer bent the end of the firing pin and I had to replace it. $5 later I was back out on the range.

Some of the features on these rifles such as the trigger and flash hider may vary depending on when it was imported, and by who. Barrels that do not have flash hiders can be threaded. It's a $50 do-it-yourself project. Receiver scope mounts and triggers are more difficult to add/replace.

The major down side to the WASR 10 is the magazine receiver. Plastic aftermarket magazines do not fit well and are difficult to lock into place. Steel mags work great. I believe plastic mags can be modified to fit better but I have not taken the time to experiment with it.

The quality of the WASR 10 is somewhat less than other AK's and that is reflected in the price. Since performance was not compromised, I would not rule out the WASR 10 when shopping for an AK if the price is right.

I bought mine for less than $400 dollars which I think was a great value. Unfortunately, the current prices run about $600-800. I do not feel that the WASR 10 is a good value at prices over $600, however, markets vary.


r/gunreviews • • Apr 11 '13

REVIEW [Review] [Colt] Colt Service Model ACE

15 Upvotes

Colt Service Model Ace

Overview:

Caliber: .22 long rifle

Magazine capacity: 10 rounds

Length: 21cm (8.25") (full sized 1911)

Barrel Length: 12cm (4.75")

Weight: around 1.1kg (2.4lb)

The Colt Ace is a .22lr version of the .45 Colt 1911.

It is available both as a stand-alone pistol, or as a conversion kit for a .45 1911 frame.

The kit consist of a slide, recoil spring, a barrel, and a magazine.

The pistol does exactly what you'd expect. It allows you to practice with a 1911 using inexpensive .22lr ammunition.

The pistol handles and disassembles exactly like any other 1911, with a couple of minor differences: It has a separate ejector which hooks on to the barrel and slides within the slide. The barrel is fixed. And it has a free floating chamber that acts as a recoil booster (I'll get into that later on).

I have had this pistol for over 10 years, and I've been shooting it regularly (although not as often nowadays as I used to). I hesitate to guess how many rounds I've put through it, but a rough estimate brings it up to at least 20,000.

The pistol is extremely reliable. In fact I have never experienced a jam that wasn't caused by faulty ammunition (failed-to-fire duds). I've run all kinds of ammunition through it, and it cycles everything from standard velocity to Stinger equally well.

A very unique feature on this pistol is it's floating chamber. The way this work is that the chamber is allowed to move backward about 1.5mm, driven by the expanding gasses. This knocks the slide backward with more force than you'd normally get from a .22 cartridge.

This results in a very reliable cycling of the heavy slide (relative to other .22 pistols). Some people say that this is done to simulate the recoil of a .45, but I think that would be quite a bit of an exaggeration.

The pistol does however have quite a kick compared to other .22 pistols, which puts it at an disadvantage if you are using it for competition shooting.

The floating chamber does have a drawback in that it gets fouled up fairly quickly, and it is a part that will need to be cleaned regularly. It has a groove along it's base that allows quite a bit of gunpowder residue to gather up before it becomes a problem. The chamber is quite easy to clean. I've found that a brass scraper tool is perfect for the job.

The accuracy of the pistol itself is quite good (as you would expect from a .22), but since it is quite jumpy (because of the heavy slide and the recoil booster mentioned above) it is harder to shoot than most .22 pistols.

The sights of the Service Model are fully adjustable, and the pistol has a excellent sight picture.

There are two flaws with this pistol that rather annoys me, and both involve the slide-stop.

First of all the magazine follower is made out of plastic (this may differ on earlier productions). This means that the tap that engages the slide-stop gets worn down and mine no longer locks the slide back at the last shot.

The second problem is that the notch in the slide for the slide-stop is further back than on the .45 pistol (because of the shorter cartridge). This means the slide is moving forward at some speed when the slide-stop catches it. This causes quite a bit of wear on both the slide and the slide-stop, resulting in the slide-stop often disengaging the slide by the slightest jolt of the pistol.

I have put a rubber buffer on the recoil spring guide to limit the back travel of the slide to prevent any further wear on the slide and slide-stop.

Overall the pistol is very fine quality, and despite the flaws with the slide-stop and the magazine follower, I wouldn't trade it for anything.

It isn't a competition pistol, but it is pretty accurate non-the-less, and very fun to shoot.

I've seen a couple of other .22 versions of the 1911, but I don't have enough hands-on experience with them to make a comparison.

I do however have the impression that a lot of them are rather flimsy. The Colt Ace is an all steel pistol, with the exact same weight and balance as a .45ACP 1911.

So if you have a 1911 (or generally just think they are neat), and you are looking for a .22 training pistol, It is definitely something worth checking out.

It is however not cheap. I payed around $900 for mine over 10 years ago, and as far as I can tell the price tag in the US is four digits now (for the stand-alone pistols).

Now it wouldn't be a review without a couple of photos, so here you go:

Left side view

Right side view.

Pistol disassembled.

The ejector in it's position between the barrel and the slide.

The slide, slide-stop, and magazine follower. All showing signs of wear.

The barrel and separate floating chamber. notice the cut-out in the barrel for the ejector.

The floating chamber in it's extended position.

The sight picture. You wouldn't know that this wasn't a .45 until you fire it.

The muzzle. It has a quite smaller bore than you are used to seeing on this sort of pistol.


r/gunreviews • • Feb 28 '17

Cobra Denali - The cheapest gun in America $99

14 Upvotes

I am in the processes of selling all of my other guns!!! This is truly the only gun I will ever need. Just kidding. I still have all my fingers and toes. No catastrophic failure. I went through 50 Pefecta FMJs with one failure to feed at round 46. Twice on the first round, the gun would not go all the way into battery. I found that I have to 'slingshot' the slide, Pull it all the way back, and release and make sure I do not ride it. Here is the bad news. I tried one magazine of Winchester Defend and I had 3 failures to load. Only 2 times was I able to shoot twice without a jam with these hollow points. Also 2-3 times, there was a delayed cycle as the bullet was loading into battery, but did get there. Kinda reminded me of my high point before I got a new recoil spring. Also the trigger pinches my finger when I shoot. There is a space between the bottom of the trigger guard and the trigger, and when firing my finger always found it. It is pretty accurate. My 5 shot groups were about 3" at 15 feet. I am going to see what else I can do to improve reliability with hollow points. At this point, I do not trust this gun enough to carry it.


r/gunreviews • • Nov 09 '14

[Review] [Tula] M91/30 PU Repro. Sniper

Thumbnail
imgur.com
14 Upvotes

r/gunreviews • • Nov 09 '14

[Review] [Norinco] Type-56 Carbine (SKS)

Thumbnail
imgur.com
14 Upvotes

r/gunreviews • • Nov 09 '14

[Review] [High Standard] 1911A1

Thumbnail
imgur.com
14 Upvotes

r/gunreviews • • Jan 23 '14

[Review] [Ruger] SP101 .357 2.25"

14 Upvotes

My wife and I got a babysitter this weekend and headed out to the new range outside of town. It is the first time we have been shooting in a few months due to the birth of our son that we are in the process of adopting. We both had Christmas gifts that we wanted to shoot and figured that we would take advantage of the nice weather that we are having this weekend (66 degrees with just a little wind).

I have been itching to try my Ruger SP101 that I got just before Christmas and my wife was wanting to shoot her new S&W Bodyguard.

My Ruger SP101 was used when I picked it up from the local gun shop in mid December but it appears to only have been lightly used. I started by taking off the Hogue grips and put on a set of Altamont Grips with snakeskin rosewood inserts.

My first impressions of the SP101 are like most everyone's impressions. It is a Tank. It is overbuilt, heavy, and bulky; and I love every bit of it.

The Altamont Grips are like the factory rubber grips but with checkering on the front and back-straps. The grips fit my hand well and the extra texturing on the rubber and on the wood inserts make for a really good solid grip on the gun that doesn't shift during recoil. The rubber part of the grip is a little tacky but not obnoxiously so. I haven't carried it concealed yet so I cannot speak as to whether it will grab clothing or not.

The sights on the SP101 leave a lot to be desired. They are plain and simple fixed sights but I found it easy enough to acquire a good sight picture. When I was shooting .38 specials I found that point of impact was hitting about two inches below of point of aim. When shooting .357 the point of impact was right on point of aim.

Shooting the gun was a dream. I shot about 50 rounds of .38 special through the revolver to begin with. The recoil was very tame, the heft of the revolver really helped soak up any kick that the rounds had. My wife put a few rounds through the SP101 and was very surprised at how light the .38s felt when shooting it. I also shot a few cylinders of full powered .357 defensive ammo through the revolver and while I definitely felt the recoil it was not bad enough to make me flinch or to take me by surprise. The hot .357 loads are not something that I would shoot all day through it but I can see myself putting a couple cylinders of it through the gun every trip to the range to keep familiar with the gun.

The trigger is average for a double action revolver. It was not particularly heavy or gritty but it was long and did take a little getting used to compared to my S&W revolvers which are pretty smooth from use. The trigger pull is long but it is also predictable. I found it very easy to stage the trigger in double action so that I could set up the shot and steady myself right before the break for some excellent shots. I did shoot a few rounds single action just to try the lighter trigger break and it is what anyone would expect from a decent single action pull. There was no grit or slop and broke very crisp and easily.

Overall I think that the SP101 is a wonderful revolver. When shooting .38s it is very fun at the range and for general familiarization with the gun. The ability to shoot full powered .357 rounds through the gun makes it a great carry gun when you are wanting something with a little extra punch. The robust build and quality of the gun will make sure that the gun will last and be ready to go whenever it is needed.


r/gunreviews • • Apr 05 '13

REVIEW [REVIEW] Sig Sauer P220

14 Upvotes

Please excuse any noobness as this is my first and only firearm purchase so far.

Sig Sauer P220 .45 ACP Stainless Steel Siglite Night Sights

The price tag was around $1200, but I talked them down to $1,000. An added bonus was the person ringing me up at the register was a chatty one and was so involved with talking to me about his guns that he forgot to add the taxes and fees. Got it for $1,000 flat out the door.

During my 10 day waiting period, I purchased a Stainless Steel Guide Rod, Hogue rubber grip with finger grooves, and a 10 round magazine (it comes with two 8 round magazines). I live in CA, so 10 is the limit. Plus it is single stack anyway. I have large hands, so single stack wasn't really the best choice for me. When I shoot Springfields and Glocks, they feel much better in my hand as my hands feel more comfortable around a larger base.

I go shooting often, but I shoot at steel targets, so I don't know how my groupings are. However, some of the targets are 50+ Feet away and I can usually hit them on the first shot.

Stainless Steel was a hit and miss for me. I love that it feels so solid and it is a breeze to clean. However, the weight of the gun does start to take a toll after multiple magazines as I like to take time with each shot and aim each one for a few seconds. My arms get tired really quickly! On a positive note, my friends all comment that there is less recoil than other 45s due to the weight.

DA/SA. I'd rather have a more traditional safety than the DA, but it's better than nothing. I've tried shooting some rounds using the DA, but it's pretty dang hard to have proper trigger control with that much movement.

Although I like the gun, I shoot much more accurately with my friend's Springfield XD45 (it's not even the Match one). I'm thinking of sending in my gun to Sig to install the Short Reset Trigger and polish the ramp. Hoping that will liven my gun up a bit, but I'm ready to make my next purchase once the prices fall a bit..Colt M4 Carbine (CA Compliant). Everyone and their mom tells me to just buy the parts separately. That I can get better quality items, be able to select each part to my liking, and it will probably be cheaper. While all this may be true, I just want the Colt one...I don't know why. My next purchase after that will probably be a Colt or Springfield or Browning 1911, and then a Beretta 92FS. After that, I want to get a bolt action .308 (not sure which one yet), and then a pump shotgun.

EDIT: Changed yards to feet. LOL. I can't shoot 50 yards away.