r/gridfinity • • 1d ago

Gridfinity desk - customazible grid colors

Thumbnail
gallery
35 Upvotes

I already use Gridfinity in my drawers, but the standard baseplate never looked right on a desk when empty. So I made a grid with a thicker margin and swappable inserts instead. Print the inserts in whatever colours you like, and the base fills out into something that actually looks good sitting on your desk, even when nothing's in it.

Link to makerworld:

https://makerworld.com/models/3651144?appSharePlatform=copy


r/gridfinity • • 1d ago

I made a 1×1 Gridfinity holder for the Bambu Lab scraper

Post image
16 Upvotes

I wanted to store the original Bambu scraper upright and pull it out without lifting the holder from the grid. I made a one-piece 6U holder with a bit of clearance so the scraper slides out easily. The model is free, and I included the STEP file in case anyone wants to tweak the fit.

MakerWorld link: https://makerworld.com/en/models/3650239-gridfinity-holder-for-bambu-lab-scraper-1x1-6u#profileId-4187792


r/gridfinity • • 1d ago

I made a thing - 2oz acrylic craft paint holder

Thumbnail
gallery
50 Upvotes

I am finally building an office/man cave/maker space. I got my first work bench built and tossed openGrid between the counter top and upper cabinets. Now I need to utilize gridfinity to create organization and keep the space from going chaotic.

I love to paint my prints and really up them from a print to a artsy display piece, that means a lot of craft paints in that standard 2oz size. I have not seen that system that tickled my fancy for how to get paints from storage to creation space and back again.

My take is simple gridfinity 4x2 box with holes cut to slide the paints in, simple. The spin was cutting a spot in the bottom of the gridfinity box so I can stack the paints in my drawer and lot have any fear of them falling over. Easy to carry 16 or 24 paints at a time, and they sit on my gridfinity openGrid shelf for easy access while painting. So far these are working nice for me.


r/gridfinity • • 2d ago

Gridfinity hex bit holders and trays

Thumbnail
gallery
37 Upvotes

I recently published a series of Gridfinity hex bit holders and trays that I feel are versatile, scalable, simple, and have a nice aesthetic. I would love to get some feedback on them. THIS IS THE LINK.

One refinement I have in mind is wider spacing for the vertical holders to be more accommodating for larger fingers.

The initial idea was gradually taller surfaces to better accommodate both short and long bits, and also a horizontal tray to accommodate double-end and very long bits. From there I thought some modular scalability would be useful. I ended up with a couple curved surface holder blocks, and a slanted planar block. Then added smaller curved and planar expansion modules that mate flush.

(The Pac Man ghost was an older design exercise that is published separately HERE.)


r/gridfinity • • 2d ago

Gridfinity Labels

Thumbnail reddit.com
3 Upvotes

r/gridfinity • • 2d ago

Question? Which Gridfinity generator is that from?

Post image
3 Upvotes

A while ago I printed this baseplate which I believe strikes the perfect balance regarding utility and weight, but for the life of me, I cannot find the generator (if even) I used back then.

Does anyone have a clue?

Thanks!


r/gridfinity • • 3d ago

Parametric, stackable screw organizers with a spot for NIIMBOT labels

Thumbnail
gallery
193 Upvotes

Made these organizers for my growing collection of screws. They’re parametric, so I can adjust the dimensions and compartment layout, and they stack for storage.

Each tray has a dedicated spot for a NIIMBOT label. I’m using 12 × 40 mm labels with the screw size and type, so I can quickly find the right tray.

The photos show my M3 and M4 trays. Curious how you organise your hardware — by diameter, length, head type, or a bit of everything?

You can download it here


r/gridfinity • • 3d ago

Trying to understand the spec

1 Upvotes

So we have this spec https://gridfinity.xyz/specification/ which is defining lip and bin base dimensions separately and also connects them with 0.25 clearance on one of the pictures. Trying to remodel that in CAD gives me discrepancy which either results in the lip being slightly shorter or the clearance gap being smaller. Is this expected? Am I interpreting it wrong? Is the spec incorrect?


r/gridfinity • • 3d ago

Which Gridfinity site do you prefer for planning drawer organizers?

30 Upvotes

I’m new to 3D printing and want to make a Gridfinity setup for my drawers. I’ve come across a couple of sites for designing and planning baseplates:

Has anyone used both? Which one do you prefer, and why? I’m especially interested in ease of use, getting a good fit in a drawer, and not using more filament than necessary.

I’m using a Bambu Lab P2S with Inland Basic PLA. If there’s another site or tool you like better, I’d appreciate the recommendation!


r/gridfinity • • 3d ago

Starter Packs I built GF-Swap because I got tired of throwing away big custom Gridfinity bins

87 Upvotes

I’ve been working on something called GF-Swap (Gridfinity-Swap) for a while and finally decided it was ready enough to share.

The idea came from two frustrations I kept running into with custom Gridfinity bins

The first was downloading larger custom holders, sometimes 4×3 or 5×2, that were supposed to fit the exact tool SKU I owned. Sometimes 3-4 (or more) hours and 300-500g of filament later, I’d occasionally discover that the tool didn’t actually fit.

At that point, there wasn’t much to salvage and I'd (reluctantly) throw the bin away.

The second frustration came from my own designs. Sometimes I’d make a custom bin (just for myself and my specific esoteric tools and implements) and it worked fine. But, after using it for a while I’d think of some small improvement I wanted to make. Better finger access, slightly different positioning, shallower cutout, easier removal, whatever.

But then I’d look at the 300+g bin I had already printed and think, “Do I really want to print this whole thing again just for that?” Usually I didn’t.

That was the basic idea behind Gridfinity-Swap.

Instead of making the whole custom Gridfinity bin one piece, GF-Swap separates it into:

Bin Shell = the reusable Gridfinity-compatible bin

Insert = the smaller custom part that actually holds the tool or parts

So if the fit is wrong, or you come up with a better version later, or you lose or replace that tool - you can just replace the lightweight (time and filament) Insert instead of reprinting the whole bin.

I originally built this for myself because it solved a problem I had. Once I got it working, I figured other people who print a lot of custom Gridfinity storage might find it useful too.

I made a small 1×1 Discovery Kit with a few sample inserts so people can try the swapping and retention concept without committing much filament or time.

That said, 1×1 is really more of a demo than a main use case. The connector/keep-away area is basically the same regardless of bin size, so it eats up a lot more of a tiny 1×1 than it does on something like a 2×5 or 3×6 The larger custom bins are where I personally think it starts to make a lot more sense. But it technically can be used on as small of a bin as 1x1x4H.

The initial release includes Bin Shells from 1×1 through 6×6, several heights, and multiple retention options.

I’ve also put together a Designer Kit for anyone who already makes custom Gridfinity models and wants to experiment with GF-Swap Inserts. It includes the design standard, Fusion Insert Creator, starter F3D, blank Inserts and Keep-Aways for other CAD tools, and some reference material.

Everything is below (including a small intro video that I "directed" with AI help to make a Blender script. It's rudimentary but still shows the essence of the system). I'll be getting this on Printables shortly.

https://makerworld.com/en/models/3608487-gridfinity-swap-gf-swap

For the Designer Kit, click Download STL/CAD Files on the MakerWorld page.

If this gets some traction and proves useful to people beyond just me, my plan is to clean up the remaining internals and open-source the system and generator code as well.

Mostly, I’m just curious what other Gridfinity users and designers think. I'm a small time designer and I am not a "marketing" guy for myself or my products. I built it because I wanted it for my own setup, and I’m sharing it in case it solves the same problem for others.


r/gridfinity • • 4d ago

Print your bins footless and glue on 2 hollow feet: up to 34% less plastic, up to half the print time

Thumbnail
gallery
94 Upvotes

This started when I noticed that on every Gridfinity bin I printed, the first 20% or so of the print was just feet. A full grid of solid feet under every cell, before the printer even got to the bin.

But a bin only needs a couple of feet to lock into the baseplate and stop sliding. The feet are there because of how bins print, not because a drawer needs them. So I tried printing bins flat and footless, then gluing on just 2 feet on a diagonal.

Frame Feet: a standard foot with the wide top flare cut off, printed hollow. 1.4 g each. Same height and the same bottom chamfer as a normal foot, so it seats in any standard baseplate with the usual play.

Drop grid: the part that makes gluing easy. It’s a thin grid with an L-shaped lip on two edges. Turn the bin upside down, lay the grid on it with the lip hugging one corner, put a little CA glue on a foot and drop it through a window. It lands exactly on the grid position. Lift the grid off and you’re done. Print one grid and reuse it for every bin.

What it saves (P2S, PLA, 0.20 mm, 3 walls, 15% infill; bin and 2 feet on one plate):

BinStandard feetFootless + 2 Frame FeetSaved
2x2x329.6 g, 44 min23.3 g, 32 min21% plastic, 27% time
3x3x362.1 g, 1 h 2644.1 g, 51 min29% plastic, 41% time
4x4x3105.7 g, 2 h 2271.8 g, 1 h 1532% plastic, 47% time
5x5x3161.7 g, 3 h 34106.6 g, 1 h 4534% plastic, 51% time

The bigger the footprint, the more you save.

Works with bins you already have. Cut any bin at 4.75 mm in your slicer (the top of standard feet) and print the top part. The MakerWorld version also has a Customize option: upload your bin’s STL and it comes back cut flat, with the feet and a drop grid on their own plates.

It’s not only for Gridfinity bins. Any flat-bottomed box works: a screw box, a drill bit case, a battery caddy. Glue 2 feet on and it locks into your baseplate. The grid spaces the feet exactly 42 mm apart.

Notes:

  • Print a full plate of feet once (36 fit on a 256 mm bed) and keep them in a drawer. Then every new bin prints footless and you just glue on 2 when it comes off the printer.

  • 2 feet on a diagonal is plenty in a drawer. Use 4 corners if the bin also lives on a desk.

  • Half-cell (21 mm) feet and grids are included too.

  • For glossy plastic, scuff it first. For PP/PE (most store-bought organizers), CA won’t stick, so use double-sided foam tape.

Free on MakerWorld, with profiles for P2S, A1 and H3C: https://makerworld.com/en/models/3634745

Happy to hear how it works on your bins, and whether the fit feels right on other baseplates.


r/gridfinity • • 4d ago

Label Creation Tool

3 Upvotes

I'd like to find a software tool that I can feed a list of McMaster P/N and it will spit out labels with descriptions that I can feed into a label printer.

Does something simple exist?


r/gridfinity • • 5d ago

Question? Drawer organizer, without 3D printing the walls..?

5 Upvotes

Hi everyone, I've explored a few ideas to make my own drawer organizers, but I came to the conclusion that Gridfinity just strikes the right balance between flexibility and ease of use/making.

I have some very big drawers (three 50x90cm) and a pretty small 3D printer, so 3D printing the walls would require a ton of time and filament.

I'm thinking of using wood or something to make the walls, but I think I'd have to adapt the design somehow, right?

Do such designs exist already?

For the actual grid/base I think 3D printing should be fine as it uses relatively little filament and is easy to print.


r/gridfinity • • 5d ago

Update on the free in-browser gridfinity bin maker: several tools in one bin, an outline editor and half-grid feet

121 Upvotes

A few days ago I posted a free, open source site that turns a photo of a tool into a gridfinity bin, all in your browser. Thanks for all the feedback. The most-asked feature was more than one tool per bin, so that's in now, along with a bunch of other stuff:

Multiple tools in one bin

• Lay several parts on the calibration sheet together (like a meter and its probes, or pliers and cutters) and upload one photo. Each part gets its own pocket.

• New Layout pane: drag and rotate each part. Rotation snaps to 0/90° along each part's own centre line, so pliers line up straight.

• Each part has its own clearance, pocket depth, finger slot and symmetric setting.

• Arrange packs everything into as few grid cells as it can. The bin sizes itself to fit, or you can lock it to a set size.

• It warns you if pockets overlap or a wall between them is too thin to print.

• SVG/DXF export keeps the arrangement, one outline per part.

Outline editor

• If the trace isn't quite right, you can edit it like a pen-tool path: drag points and curve handles, add or delete points, switch corners and curves, straighten an edge or round a corner.

• Keyboard shortcuts: D delete, A add, C corner/smooth, S straighten, R round.

• For symmetric tools, you edit one side and the other side mirrors it.

Better tracing

• Straight edges that used to come out wobbly (boxes, handles) now get straightened.

• It does a better job finding parts the AI misses, like thin antennas or probes next to a bigger tool.

Smaller stuff people asked for

• Half-grid feet (21 mm spacing) for 1.5, 2.5… unit bins (thanks u/duckredbeard)

• Width and length measurements on the trace

• The finger slot can shrink down to a round hole, and can sit at the tool's tip instead of across it

• Bins build about 4.5x faster

Still free: no account, no trace limit, and your photos never leave your device.

https://gridfinitytools.com

Source (MIT): https://github.com/petercsauer/gridfinity-tool-studio

Still on the list: STEP/3MF export. Keep sending photos that trace badly, those have been the most useful thing so far.


r/gridfinity • • 6d ago

Thank you for all your support on my gridfinity travel case!!

Thumbnail gallery
22 Upvotes

As promised, I'm finally ready to release my parametric case and website insert/bin generator. I've summed up the features in this post. Please check out the website generator as I'm sure I will need to take a lot of advice from you all. And please check out this model. It has 15 different parameters of adjustment within maker world.

As always, I welcome any feedback you guys may have. I hope you all find this useful and enjoy!!!


r/gridfinity • • 6d ago

Set in Progress Picked up some mini cabinets from work and now I’ve started my Gridfinity journey

Thumbnail
gallery
114 Upvotes

r/gridfinity • • 6d ago

How is the height of a Gridfinity box determined?

1 Upvotes

I'm trying to figure out what determines the total height of a Gridfinity box.

I've found a few 6U models on MakerWorld that are listed as 45.55 mm tall.

I understand that 6U = 42 mm (6 × 7 mm), but where does the extra 3.55 mm come from?

As far as I understand, the stacking lip is 4.4 mm tall (0.7 + 1.8 + 1.9 mm), so I would expect the total height to be 46.4 mm.

Am I misunderstanding something about the Gridfinity specifications, or is part of the stacking lip included in the nominal height?


r/gridfinity • • 6d ago

Fusion gridfinity generator got some updates: editing, text labels, configuration export and more

Thumbnail
gallery
61 Upvotes

Recently added a bunch of features, would appreciate some feedback and help with testing. It's currently only available through GitHub releases page, full list of changes is also there https://github.com/Le0Michine/FusionGridfinityGenerator/releases/tag/v2.4.0.0

Most notable are labels support for multicolor printing, export/import of configurations and ability to rebuild already created models. A bunch of minor bug fixes and quality of life improvements


r/gridfinity • • 6d ago

Set Completed Workbench Gridfinity

Thumbnail
gallery
82 Upvotes

After seeing all the posts here, I figured I would post my current toolbox setup, all in a Husky 52" box.

The top drawer is mostly sockets and ratchets

The larger drawer, 2nd down, is wrenches and line wrenches

Drawer 3 is pliers, knives, and other odds and ends

Drawer 4 is all bike tools, since that's one of my major hobbies

Small drawers are as follows

Drawer 1, screwdrivers and bits

Drawer 2: consumables, like drill bits, taps, and Dremel tools

Drawer 3, is car-specific tools, like trim tools, fuel lines, and the like.

Drawer 4 is all my measurement stuff.

Gridfinity has been fun for having all my tools organized since I share the garage and box with a few others. But fun for keeping my major hobbies of working on cars and bikes organized.

But it's also been fun to learn how to design in Fusion better.

I do also have a Harbor Freight Mini box that I keep organized with firearms tools and cleaners.


r/gridfinity • • 7d ago Bravo

USSA vault 3D configurator

Post image
32 Upvotes

Hey all,

This is a fork of Romy's (rmacasieb) print planner for the USSA Vault. I kept adding things to it, so here it is:

  • Design your stacks level by level in 3D

  • Paint each part with its filament colour

  • Print: parts laid out on plates, with progress tracking

  • Hardware: the full list of bolts, rods and inserts to buy

Point it at your own Vault folder and the 3D shows the real parts. Free, runs in the browser, nothing to install.

https://doooools.github.io/vault-print-planner

The store links are affiliate links (Romy's on Amazon.com, mine on a couple of European stores), feel free to ignore them. Bugs and ideas welcome!


r/gridfinity • • 8d ago

Set Completed Scoop Bin Set Complete!

Thumbnail
gallery
55 Upvotes

I posted here about a month ago and got some decent feedback on my scoop bins I put up on makerworld. Over the past month I’ve printed and verified all 21 sizes in the 4U height that could fit on my print bed and finally getting the last model uploaded today. Still new to posting models but it feels like a decent accomplishment to get them all finished.
Now to work on the taller heights!

https://makerworld.com/en/models/3360948-gridfinity-scoop-bins-easy-access-parts-bins#profileId-3825688


r/gridfinity • • 8d ago

Set Completed GoPro / External Hardrive Drawer

Post image
11 Upvotes

r/gridfinity • • 8d ago

What is your favorite method or software to go from a picture of a tool/object to a customized cut-out gridfinity container that fits the tool with reasonable accuracy?

Post image
242 Upvotes

r/gridfinity • • 8d ago

[Discussion] My workshop is a mess. Looking for 3D-printable storage ideas — I have pegboard, drawers and extra wall space

Thumbnail gallery
0 Upvotes