r/gigabyte • • 4h ago

My GPU RMA was received a week ago and there's no status update?

2 Upvotes

Is this normal? I wrote to their support email twice and got no reply...

Really frustrating as I can't use my PC to do my work!


r/gigabyte • • 2h ago

Can't change colors on the fans that came with my c500 gigabyte stealt case

Thumbnail reddit.com
1 Upvotes

r/gigabyte • • 4h ago

Updating motherboard B450M DS3H-CF

1 Upvotes

The BIOS of my motherboard B450M DS3H-CF is version F2 (from 2018). Do updating to the last version F68c directly cause any problems?

This is the page I'm using
https://www.gigabyte.com/es/Motherboard/B450M-DS3H-rev-1x/support#Support-Bios


r/gigabyte • • 6h ago

GIGABYTE India / Best Yield Chennai holding RMA CEP-26A0069 (RTX 5060 Ti 16GB) for 22+ days — admits card is unrepairable & out of stock, tries to force an AMD GPU onto a CUDA AI workflow (NCH Grievance: 10737466)

Post image
1 Upvotes

Sharing my ongoing RMA experience with GIGABYTE India and their authorized service partner, Best Yield Technology (Chennai), so other buyers know what to watch out for.

Timeline & Facts:

- Product: GIGABYTE GeForce RTX 5060 Ti WINDFORCE MAX OC 16G (purchased July 2026 for ₹60,194; current retail price is ₹1,02,999)

- RMA / Ref: CEP-26A0069 / REF26A22247

- 27 Oct 2026: GPU received at Best Yield Technology, Chennai (invoice stipulates a 10–15 day service turnaround).

- 27 Oct – 10 Nov 2026: Zero response from Chennai phone lines or email; status stayed frozen at "Received" until escalated to senior management.

- 10 Nov – 16 Nov 2026: Moved to "Diagnosis / Function Validation" for 6+ days with no diagnosis or ETA.

- 16 Nov 2026: After sending a 48-hour pre-litigation notice, Best Yield admitted in writing that the card cannot be repaired, is out of stock, and offered an AMD Radeon RX 9070 XT 16GB (GV-R9070XTGAMING OC-16GD) as an alternative.

Why the AMD Offer Was Rejected:

I use this 16GB card for university AI/ML model evaluations on Windows that depend strictly on native NVIDIA CUDA, cuDNN, and TensorRT. Swapping an NVIDIA card for an AMD GPU breaks the entire software pipeline and is not a functional equivalent.

I formally requested an NVIDIA 16GB replacement (RTX 5060 Ti 16GB or RTX 5070 16GB) from national hub inventory by 18 Nov 2026, which went unanswered. I have now registered a formal complaint with the National Consumer Helpline (NCH / INGRAM Grievance No: 10737466) and the Department of Consumer Affairs has notified GIGABYTE India.

Hoping GIGABYTE India's team steps in to allocate a factory-sealed NVIDIA 16GB replacement unit promptly.


r/gigabyte • • 10h ago

Xeneon Edge - USB-A?

Thumbnail reddit.com
1 Upvotes

r/gigabyte • • 10h ago

Support 📥 DC-in jack compatibility to model 16x akg/16x 6lag

1 Upvotes

Hi yall, i bought aorus laptop specifically the model 16x akg 2024 a year ago and having an issue with the dc-in jack port. Long story i think the port itself came loose over a year of use and might deteriorated a bit cuz it's not delivering the same power which is leading to cpu's ghz drop, after taking it to the pc master he told me the same, turns out this exact problem is common with this models since their dc-in port is soldered directly to the motherboard.

So as for to my question is dc-in jack for 16x6lag compatible with 16x akg model or should i better get the exact port for this model instead of risking?

thank yall in advance


r/gigabyte • • 12h ago

Suggestion 💭 AORUS 15 BKG (2024) owners: How’s the build quality, and is it worth buying used?

1 Upvotes

I’m looking at a used Gigabyte AORUS 15 BKG (2024) locally in Yemen. It looks really clean, and I’d like to hear from people who’ve owned one for a while.

It has a Core Ultra 7 155H, RTX 4060 8GB, 16GB DDR5, a 512GB SSD, and a 15.6-inch QHD 165Hz screen.

My other option is an Acer Nitro 17 with a Ryzen 7 7840HS and RTX 4060, which I might be able to get in 150$ less.

How have the hinges, lid, and keyboard deck held up? Any issues with heat or fan noise during longer gaming sessions? If both laptops are in similar condition, would you pay the extra $150 for the AORUS?


r/gigabyte • • 13h ago

Support 📥 Bios help?

Thumbnail gallery
1 Upvotes

r/gigabyte • • 15h ago

Gigabyte GAMING A16 fan stops completely when unplugged (even when hot ~60°C)

0 Upvotes

My Gigabyte GAMING-A16-CMHH2VN893SH laptop fan works normally while plugged into AC power. However, the fan stops running immediately when unplugged, switching to battery power, even when the device is still hot after gaming. I have configured both the AC and DC profiles to be exactly the same in the AI Power Gear II app for balanced performance, but the issue persists


r/gigabyte • • 1d ago

Support 📥 Uhh why does my motherboard have a more recent bios than the official website???

Post image
6 Upvotes

r/gigabyte • • 1d ago

RX5700xt power connectors

Post image
4 Upvotes

I bought a second hand 5700xt and is it just me or is it missing some power connectors? Every picture I see of them has a 3x3 connector next to the 4x4.


r/gigabyte • • 23h ago

B850 AORUS ELITE WIFI7 - Fans stop briefly when booting into Windows the restart

1 Upvotes

I just recently bought this motherboard and it works well. It's my first Aorus motherboard (coming from Asus) and I was puzzled to see that some but not all of my fans briefly stop spinning as soon as Bios finishes posting and Windows start loading. Then they recommence spinning within a few seconds. The bizarre part is that some of the fans keep spinning without briefly stopping.

Here are more details:

The fans that briefly stop and then start again:

- Rear Case Fan: BeQuiet! Silent Wings Pro 4 140mm PWM connected to SYS_FAN1 header.

- CPU Fan: V8 ACE 3DHP Cooler - 2 fans connected to the CPU_FAN header using a splitter.

The fans that keep spinning without pausing:

- Front Case Fans: 3 BeQuiet! Silent Wings 4 PWM 120mm fans connected to the Fractal Design North XL Passive PWM Hub/Splitter, then going into the SYS_FAN3 header.

Any input would be appreciated, but I have read many posts describing similar situations with Aorus Motherboards, so perhaps a Bios fix is in order, unless it is a limitation in the hardware itself.


r/gigabyte • • 23h ago

Support 📥 Background update leaving gigabyte files back

1 Upvotes

Hey gigabyte,

Pls don't leave you update files in my download folder.
Spamming the user's download folder in not good...


r/gigabyte • • 1d ago

No puedo controlar mis luces ARGB

Post image
1 Upvotes

Tengo una motherboat gigabyte b650 auros élite ax v2 y me dio un problema con la luz de cpu todo funcionaba bien, pero la luz de la cpu se quedaba prendida, este problema lo resolví con unos archivos lo pude solucionar hasta aquí todo bien. Después de esto la luz de la cpu se apago ya no tenia el leed prendido, pero después de ese día e descargado todos los programas que existen para controlar la luz ARGB de pc y ninguno me soluciona este problema, solo me dejan controlar la luz de la memoria ram. Tengo 8 fans el fan de atrás y los fans de la derecha les cambio la luz atraves del botón de resert del case mientras que el fan del procesador y los de arriba no les puedo controlar las luces por esta razon estan apagado siempre, mis fan son unos Antec connect 120 ARGB. Las conexiones están correctas porque antes de que pase lo del leed de la cpu funcionaba todo excelente y sin problemas.


r/gigabyte • • 1d ago

Gigabyte GO27Q24G vs. MO27Q2A

Thumbnail reddit.com
1 Upvotes

r/gigabyte • • 1d ago

Support 📥 Google Chrome ??? in GCC ? What ????

0 Upvotes

Why on earth would I install Chrome via GCC ?


r/gigabyte • • 1d ago

Support 📥 Problem with SSD drive

1 Upvotes

I have a Sandisk 1TB M.2 PCIe Gen4 NVMe Black SN7100 SSD and motherboard B650 GAMING X AX (Rev. 1.5)Rev. 1.5Rev. 1.0/1.1/1.2 after connecting the SSD to each port Windows cannot detect this drive and I have tried every method. Bios detects the drive in NVMe settings But after clicking the disk name twice, the entire BIOS freezes and I have to reset it. The disk works fine in another computer. I've tried many things, but nothing works and nothing has even changed. I've also updated the BIOS and drivers. Nothing new shows up in Device Manager after connecting the drive, as if it didn't exist, but the SATA SSD works fine. Please help.I don't know what to do


r/gigabyte • • 1d ago

Dram led lights up red and pc wont output DP Signal

1 Upvotes

Title says it. Built a new pc with brandnew parts, the ram is on the compatible sellers list and is in a2/b2 slot. Tried both slots individually. All fans exceot gpu start up, all rgb works. But it wont output video signal. What should i do?


r/gigabyte • • 2d ago

Don't buy gigabyte. Horrible customer service.

27 Upvotes

Bought Aorus X870E ELITE motherboard. 5 months in the thing kills itself and it wont turn on or post. I send it in for RMA request. Gigabyte USA accepts and I send it from Florida to California on my dime. They confirm that its broken - Gigabyte customer support: "Certain component firmwares had corruptions, the team factory reset them and reflashed them and tested the board afterwards before returning to you. If you have any issues please feel free to reach out, thank you."

Upon receiving the board, it still does not function or POST. Its like the lied about testing it.

I open a 2nd RMA request for the same board and email them about wanting them to supply a shipping label as I am not eating another $50 bucks to send it to incompetent people.

2 weeks go by and I try to email them wondering why no response, and it appears that they blocked email from my IP / email address.

I send them email from my work email address. Sends fine. Will see if they respond.

This has to be illegal. Well within warranty still.


r/gigabyte • • 1d ago

128GB DDR5 (4×32GB) on Ryzen 9 7950X + Gigabyte B650 – Maximum Stable RAM Speed and EXPO After BIOS Update?

Thumbnail
gallery
1 Upvotes

My hardware:

  • Motherboard: GIGABYTE B650 AORUS ELITE AX V2

  • CPU: AMD Ryzen 9 7950X

  • RAM: 128GB DDR5 (4×32GB Kingston FURY Beast KF560C36-32, SK Hynix)

  • Previous BIOS: F32c

  • Current BIOS: F41

  • Current RAM frequency: 3600 MT/s (EXPO disabled)

Hi everyone,

I'm looking for some real-world experiences with running 128GB DDR5 using all four DIMM slots on the AM5 platform, particularly with GIGABYTE motherboards.

Originally, I was running 64GB DDR5 at 6000 MT/s without issues.

After upgrading to 128GB (4×32GB), I managed to run the memory at 5600 MT/s using EXPO II on BIOS F32c.

Interestingly, this configuration worked for approximately six months. However, I eventually experienced a BSOD, and OCCT detected a memory error.

I tried changing the EXPO settings, but the system failed to POST. The motherboard's DRAM LED remained illuminated for over 15 minutes, and I eventually had to reset CMOS.

I have now updated the BIOS from F32c to F41.

Currently, all 128GB are detected correctly, and the system boots at 3600 MT/s with EXPO disabled.

I understand that AMD officially specifies DDR5-3600 for the Ryzen 9 7950X when using four memory modules. However, I'm curious about the actual limits with newer BIOS versions and improved memory compatibility.

My questions:

  1. Is anyone running 128GB (4×32GB) DDR5 on a Ryzen 9 7950X with a GIGABYTE B650 motherboard?

  2. What is the highest RAM frequency you've managed to achieve with long-term stability?

  3. Has BIOS F41 improved memory compatibility or EXPO stability with four DIMMs?

  4. Would you recommend trying EXPO I again after the BIOS update, or manually setting something like 4400, 4600 or 4800 MT/s?

  5. Is DDR5-5600 realistically achievable with 4×32GB, or was my previous six-month experience unusually fortunate?

I'm particularly interested in experiences from users running 128GB across all four DIMM slots, rather than the more common 2×32GB configurations.

Thanks for sharing your experiences!


r/gigabyte • • 1d ago

Support 📥 Monitor profile changes every reboot fix?

0 Upvotes

I just got a GO27Q24G and I really like it so far. But one thing that's really inconvenient for every day use is that the monitor profile switches from HDR Peak 1300 (what I want to keep using) to HDR after every reboot. So every time I turn on my PC I have to manually switch it to the right profile... Is there anything I can do to stop the monitor from doing that?


r/gigabyte • • 1d ago

Support 📥 Ryzen 9 9950X3D confirmed defective via 1-CCD isolation (0x101 BSOD), but temporary CPU still hangs on Windows restart with AIO screen/lights on

Thumbnail reddit.com
1 Upvotes

r/gigabyte • • 1d ago

GIGABYTE India rejected my laptop warranty claim by classifying a burnt motherboard as Customer Induced Damage (CID) – Seeking help and resolution

Thumbnail
gallery
2 Upvotes

I am sharing my experience with GIGABYTE India because I have been extremely disappointed with how my laptop warranty claim has been handled. I am hoping this reaches someone who can help escalate the matter and get a fair resolution.

Laptop and RMA details

- Brand: GIGABYTE

- Model: GIGABYTE G6X 9KG

- Serial Number: Ending in 2596

- RMA Number: DEOS-2660037

- Service Centre: GIGABYTE Delhi RMA, Nehru Place

- Service Partner: Best Yield Technical Service Company

What happened?

My laptop suddenly developed a burning smell and shut down while being used under normal operating conditions and connected to its power supply.

There was no liquid spillage, physical mishandling or unauthorised repair or tampering from my side.

Since the laptop was covered under warranty, I contacted GIGABYTE and initiated the service process.

Timeline of events

24 June 2026 – RMA process approved

GIGABYTE approved my onsite/RMA request under RMA number DEOS-2660037. I was instructed to pack the laptop properly and arrange the pickup using the provided delivery challan.

7 July 2026 – Warranty claim rejected

After inspecting my laptop, the technical team sent me an email stating that:

- One of the internal motherboard components was burnt.

- The motherboard had a burnt-out section and burnt PCB tracks.

- The damage was classified as CID (Customer Induced Damage).

- The motherboard was declared non-repairable.

- The laptop would be returned in the same condition.

- Warranty service would not be provided.

They also shared photographs showing the burnt area on the motherboard.

Why I am disputing this decision

I understand that the motherboard has suffered physical electrical damage. However, I strongly disagree with automatically classifying this as Customer Induced Damage.

I have not been provided with a detailed technical report explaining:

Simply identifying a burnt component and burnt PCB tracks does not, by itself, establish that the customer caused the damage.

Their policy link: http://www.gigabyte.in/WebPage/-1/tech_121022_india_p2.htm

I am willing to cooperate with a proper technical investigation, but I do not believe it is fair to reject an entire warranty claim without a transparent explanation supported by technical evidence.

What I am requesting from GIGABYTE

I am not asking for a paid repair. I am requesting a fair warranty resolution.

I purchased a GIGABYTE laptop expecting reliability and proper after-sales support. Having a laptop become unusable and then being denied warranty without a sufficiently explained technical assessment is extremely frustrating.

I would prefer to resolve this directly with GIGABYTE rather than pursue a formal consumer grievance. However, if the company refuses to reconsider the decision, I will have to approach the National Consumer Helpline (NCH) for further assistance.

GIGABYTE India, please investigate RMA DEOS-2660037 and provide a fair resolution.

Has anyone else faced a similar situation with GIGABYTE's laptop warranty service in India? I would appreciate advice from people who have successfully escalated similar cases.

Thank you for reading.


r/gigabyte • • 1d ago

Discussion 💬 GCC does not let adrenaline control custom curves

1 Upvotes

hi

i use GCC only for the leds sync

i have B850 aorus elite wifi7 ice and RX7700XT. i use adrenaline to make custom fan curves but every time i restart my pc, these curves go back to default

people say to remove "gigabyte performance library" so that GCC stop having control over fans. if i do that will i still have my leds working.? will i still be able to control them from GCC?

i dont want to put any more programs just for that.

can anyone help me?