r/functionalprint • u/MijnEchteUsername • 20h ago
My car’s side blinker clip broke.
2nd pic is the reference from an identical car.
r/functionalprint • u/MijnEchteUsername • 20h ago
2nd pic is the reference from an identical car.
r/functionalprint • u/Away-Sky3548 • 1d ago
I can't remember how many iterations I've gone through, but I think this is it! A working project box, with USB adapter integrated, no exposed wire, and not taking more than one wall socket space. And btw it's parametric!
r/functionalprint • u/solo_banana • 21h ago
I converted my built in cabinet to a vented printer enclosure with temperature/humidity sensing and fan/LED controls.
I used a 12V PC fan and a transistor to control the fan from arduino. I have 12V in to the fan and a voltage regulator to step it down to 9V for the arduino. I used a duct from a portable AC unit which attaches to the panel, and I have a cover for the fan so I can remove the duct when I’m not using it.
2 push buttons, a switch and rotary encoder navigate the menu. I tried incorporating temperature ans humidity based fan control but found the fan wasn’t effective enough to control for points so it’s mostly run in manual mode. It does a great job removing fumes and keeping enclosure temperatures down while printing.
I think I have to improve my sealing around the edges because my desiccant doesn’t seem to be dropping humidity below ~40%.
Overall this was super fun and useful and I love having my printer on display. Any suggestions or comments welcome!
r/functionalprint • u/themrbirdman • 1d ago
https://makerworld.com/en/models/3614790-secret-book-holder#profileId-4143085
I made a holder for remotes and keys and things that looks and opens just like a book to blend in. Keeps out the clutter and blends right in to other decor.
The hinge works by simply bending the print which is only 2 lines thick at the hinge. Once the filament is creased once, it relaxes and is super easy to open and close and I don't think it will ever fail. I've tried and tried to make the crease fail and have opened and closed it fully hundreds of times with no luck! Works perfectly well with PETG and PLA.
Working on adding some different sizes as well as one that doesn't open but has an opening in the top so you can put in on a shelf next to other books and drop mail or things in it!
r/functionalprint • u/evilsway • 1d ago
r/functionalprint • u/Korndog_01 • 1d ago
Sennheisers HD490 pro
Just throwing this out there if somebody wants these I'd be happy to sell them, the print not the model
r/functionalprint • u/Kingslappe • 2d ago
A Voronoi basket with a hinged lid that slides over the top of our newel post, right next to the drying rack. The bottom is a 43 mm sleeve that fits snug over the post, so it holds without glue or screws.
r/functionalprint • u/echolalialore • 1d ago
Keyhole cover for Maeving RM1S :] Anyone is free to do anything with this model.
I grew tired of the rain getting into the keyhole on the motorcycle making the key harder to remove so I made this lil rotating snap together keyhole cover. I just hot glued into the recessed bit of the keyhole area, though I'm not sure if that'll be enough. If it pops off, I'll use a silicone adhesive.
link to makerworld: https://makerworld.com/en/models/3612599-maeving-keyhole-cover#profileId-4140445
r/functionalprint • u/g713 • 2d ago
r/functionalprint • u/g713 • 2d ago
r/functionalprint • u/thankHUWverymuch • 4d ago
Features nice round grips for added comfort over longer sessions
If anyone is interested in printing the model themselves:
r/functionalprint • u/CoCoDRUK • 3d ago
I added this model a while back, and judging by the downloads and bookmarks on MakerWorld, it seems to be popular, so here’s a question for you: What elements do you think are missing from this system? What could I add?
r/functionalprint • u/BeardedYeti_ • 3d ago
Made a MAP switch relocator for my Beta dirt bike. The stock switch lives in the bar pad, so once you swap bars or add handguards it has nowhere to go. This moves it down onto the frame tube.
The switch snaps in with a printed lip, so not screws needed like on the oem version. Printed in PETG.
r/functionalprint • u/RadishRedditor • 4d ago
A version of MiniLock made to carry a Philips Sonicare 1100 (model HX364W, on the bottom).
I had the fancier more expensive & fancy version of this toothbrush that unfortunately broke down in my luggage long time ago. So, remixed MiniLock and made rugged yet compact travel case for it.
The brush goes in with the head on - you don't have to disassemble it. Pockets in the base and lid hold it in place. 60% of it is cradled by the bottom half and 40% is accoommodated for hy the lid.
Same hinge and latches as MiniLock, so still no hardware and no supports.
Grey toothbrush inlay on the lid, printed flush.
251 mm long, needs a 256 mm bed.
r/functionalprint • u/BlayBrim • 4d ago
printed the body out of PETG and the membrane out of TPU. I already have an idea for an upgrade by next season
Link to the model: cults3d.com/@BlayBrim
r/functionalprint • u/goosemacher • 4d ago
I got fed up with tangled in ear cables in the box that came with my IEMs, so I made an insert which fits in this box. You drop the buds in the bin, wind the cable around it and put it in the box. That's all there is to it really.
Very useful to me, perhaps also to other musicians?
Link to the model:
https://makerworld.com/nl/models/3591613-iem-earbud-storage-insert-cable-winder
r/functionalprint • u/Squeebee007 • 5d ago
Hey all, needed to print on a batch of golf balls and figured I'd share the jig I made. It fits in place of the existing plates and is held down magnetically. Hope it's of use!
See it at https://www.printables.com/model/1909696-golf-ball-jig-for-xtool-omni-o1-uv-printer
r/functionalprint • u/ClickBlubCoughCough • 5d ago
Made a custom organizer to perfectly hold the things I always grab on my way to work and drop off when I get home. I don’t take every item, couple things are spares.
r/functionalprint
•
u/TheOneTrueJesus
•
6d ago
r/functionalprint • u/Additional_Reach8380 • 6d ago
Wanted a way to keep all of the small tools I use on a daily basis in one small-ish package. Ran out of grey TPU, so I'll reprint the bottom layer when my next filament shipment arrives.
r/functionalprint • u/clofal • 6d ago
It was time to replace the axle seals on my truck and I didn't have a seal puller.
This worked extremely well. Used PET-CF because I ran out of PPA-CF Core that I usually like using. Honestly ASA might have been fine.
The seal in the video came out easily, the other side was seized and I had to put quite a bit of force, moving around the perimeter to get it to come out. The last photos of the part show how much indentation happened from the force of the second one.
Model files below for 1/2" or 3/8" square drive. I used 1/2" because I intended to use a breaker bar, but the ratchet was just fine.
https://makerworld.com/en/models/3578629-automotive-seal-puller
r/functionalprint • u/Absolarix • 6d ago
I have a 2001 Chevy Silverado, reg cab. Stock, it had a center jumpseat which had one storage compartment in the back of the seat. A year ago I swapped in the jumpseat from an '07-'14 Silverado, which has a larger storage compartment in the back of the seat, and a storage compartment under the seat cushion. However its cupholders are on the back of the seat, rather than by the floor.
I got tired of having cups/bottles in my way when rowing through gears, so I added the GMT800 jumpseat's floor cupholders to the GMT900 jumpseat. An afternoon of work in FreeCAD, 5 test prints in PETG, and boom, done. Now I can go back to having my water bottle down low and out of the way, but have extra storage and spots for drinks and stuff if needed.
r/functionalprint • u/lucaoaol • 6d ago
This parametric design allows you to create crisp, dual-color nameplates and luggage tags without needing a multi-color printer (AMS/MMU). The tag is split into three separate thin layers (Face, Highlight Sheet, and Back Plate) that print flat on the build plate and snap perfectly together
r/functionalprint • u/Csspecs • 6d ago
Holds the product centered and separated.