Just got FreeBSD 😁
I got steam working, also yes it's SwayFX.
r/freebsd • u/Few-Flamingo-6678 • 7h ago
I’ve been working on an experimental Intel Xe port for FreeBSD. The LinuxKPI compatibility work targets Linux 7.4, and the Xe driver and shared Intel display code come from Linux 7.4-rc2. The port currently uses an older FreeBSD DRM core with targeted backports for the interfaces the newer Xe driver needs.
The test setup is FreeBSD 16.0-CURRENT running in a KVM guest on a Dell Inspiron 15 3530, with the laptop’s Raptor Lake-U Iris Xe (8086:a7a1) passed through via VFIO.
What works
Xe attaches to the physical GPU, loads DMC firmware, and exposes DRM card and render nodes.
Mesa Vulkan renders on the GPU. An offscreen triangle test read back all 65,536 pixels and every pixel matched the expected result.
Sway runs on Xe with wlroots’ Vulkan renderer and submits 1920×1080 output to the laptop’s eDP-1 panel. Two independent Wayland windows ran for 20 seconds. I captured both the tiled layout and one window floating in the center after moving and resizing it.

The Linux 7.4 work has involved more than getting Xe to compile. The running driver exposed differences in GEM/GPUVM initialization, atomic KMS properties, and vblank handling. One crash came from the guest kernel and modules using different layouts for a LinuxKPI file structure. Rebuilding against matching headers fixed the mismatch, and a new regression check now exercises sync-file FD export, import, and close. Another crash came from the vblank path trying to take a mutex that can sleep while inside a FreeBSD critical section. I adapted that path to follow the existing FreeBSD i915 port.
What’s still open
Sway passed the dual-window test, but logged eight EBUSY page-flip failures and two direct scan-out buffer import failures. The captured frames confirm that hardware composition worked. Reliable scan-out still needs more testing.
So far this is one laptop tested through GPU passthrough. If you’ve hit similar page-flip or framebuffer modifier issues on FreeBSD DRM, I’d be interested in comparing notes.
r/freebsd • u/I00I-SqAR • 7h ago
r/freebsd • u/lastcadian • 4h ago
r/freebsd • u/inkeliz • 22h ago
Due to the new wave of security patches, I chose to set up my own Poudriere server, so I can compile packages faster than FreeBSD's package repository.
For example, the latest www/nginx version available from FreeBSD's repo is "1.30.6_18,3", while the latest port version is "1.30.7_1,3". The 1.30.7 is the version which fixes the HTTP/2 vulnerability. So, currently the "nginx" distributed by FreeBSD is vulnerable. Same applies for MariaDB, Postgress, PHP and other packages.
My Poudriere already has this new version compiled, however "pkg upgrade" doesn't seem to get it:
Running "doas pkg upgrade" it doesn't show any update ("Your packages are up to date.").
Defining "CONSERVATIVE_UPGRADE=false;" has no effect.
Defining a higher priority to my server (my own poudriere repo) has no effect.
Running "pkg update -f" and such has no effect.
However if I set `enable: false` on `usr/local/etc/pkg/repos/FreeBSD.conf`, then magically, the `pkg upgrade` shows the nginx upgrade from my Poudriere server. In other words, it only works when ONLY my server is available.
The current solution is bad, because I need to toggle on/off between FreeBSD repo and my repo.
What is the proper fix here?
r/freebsd • u/grahamperrin • 13h ago
r/freebsd • u/yoshi128k • 1d ago
I recently started playing around with FreeBSD 15.1 on an old server. I had the bright idea to use bhyve to create a virtual 9front server. I was well aware that this has already been done, so I had some idea of how to configure it.
I am not using vm-bhyve, though that certainly would make things easier. I am using a config file that I wrote by hand, based on the above wiki article, and in the format specified by bhyve_config(5).
That aside, after some issues with my config, and a botched attempt at passing through one of the onboard NICs (I ended up creating another bridge and tap device and giving the VM the tap), I was able to get the VM (and in turn the UEFI firmware) running. I connected to the VM with my VNC viewer (TigerVNC's viewer on a laptop running NetBSD 11.0), and saw the bhyve UEFI splash, as well as some errors about it not being able to find a couple boot devices (not surprising, since they are empty). It then started attempting to network boot.
I recalled from playing around with PXE on another UEFI-based system that ESC should abort the boot. I tried it, and nothing happened. I then tried CTRL+C (thinking it would do something interesting). Nothing. After some more faffing around, I temporarily commented out the virtual NICs to skip the network boot stuff. This time it prompted me to press a key to call up the boot menu, and I did, yet it did not respond.
It is possible I am doing something wrong here, but I don't see why the system, at this point, would reject keyboard input. I tried searching around, but didn't come up with much other than some mentions of input problems in guest OSes (which would be irrelevant for now, since my problem is occurring in the firmware), and this forum post where someone complained about the same problem (the UEFI not responding to input).
Is what I'm trying to do (access the UEFI boot manager) simply not possible under bhyve?
r/freebsd • u/schultzter • 1d ago
I can't get through, and downforeveryoneorjustme says they can't through either!
Did I miss a maintenance memo or something? I was trying to install this evening but it can't get through to update packages.
r/freebsd • u/hollowaykeanho • 1d ago
TL;DR
NGINX crashed due to very large payload in data plane (no control plane) caused by heap buffer overflow typically followed by an NGINX worker segmentation fault. Attackers can execute code on systems with Address Space Layout Randomization (ASLR) compromised (disabled/bypass).
Impacts
NGINX Plus:
37.1.0 < 37.3.0.1
37.0.0 < 37.0.8.1
R33 < *
NGINX Open Source
1.31.0 < 1.31.9 (semver)
1.30.0 < 1.30.7 (semver)
1.9.5 < * (semver)
Impacts on FreeBSD
FreshPort's NGINX (https://www.freshports.org/www/nginx/#history) is affected (v1.30.6), see below:
root@machine:~ # date
Thu Nov 19 07:26:17 +08 2026
root@machine:~ # pkg upgrade
Updating FreeBSD-ports repository catalogue...
FreeBSD-ports repository is up to date.
Updating FreeBSD-ports-kmods repository catalogue...
FreeBSD-ports-kmods repository is up to date.
Updating FreeBSD-base repository catalogue...
FreeBSD-base repository is up to date.
All repositories are up to date.
Checking for upgrades (2 candidates): 100%
Processing candidates (2 candidates): 100%
Checking integrity... done (0 conflicting)
Your packages are up to date.
root@machine:~ # nginx -v
nginx version: nginx/1.30.6
root@machine:~ #Mediation
Can't do much. Will update this post until new findings are out.
UPDATE:
Version 1.30.7 was committed around 7 hours before this post - by grahamperrin
Jail the NGINX should reduce the impact surface - by BougainvilleaGarden & luminouspuma
Currently watching the FreshPort for the patched version roll-out and will update here.
References
r/freebsd • u/Funny_Beat9525 • 2d ago
Some specs:
The laptop model is asus x52f with a pentium P6100 and 3 GB of ram, i tried a lot of things to fix this but still no cigar, can somebody help please?
Have I missed the Oct/Nov/Dec 2026 of the FreeBSD journal? I could not find it in the usual place
r/freebsd • u/TheAtlasMonkey • 2d ago
I spend a lot of time on old hardware. Most of this year went into Apple Intel machines that were going to be recycled, and I still have a garage full of laptops and imacs that nobody else wanted. Here are is a workflow for anyone getting an old computer because new computers cost more than a car now.
1. Dust the monster
Laptop or desktop, it does not matter. It has more sand in it than Egypt exports in a week. Take the battery out if it comes out. Open it up and blow out the heatsinks. Do not use a can of compressed air as your first choice. Go to a gas station and use the air pump they keep for car tires. Blow from a distance, so the pressure does not dislodge a component or spin a fan at speed. Clean the fans with a toothbrush, and hold each fan still while you do it, or you will spin the bearing faster than it was ever built to go. Don't forget to clean the PSU.
2. Change the thermal paste
It is cheap. It takes ten minutes if you have done it before, and ten hours if you refuse to watch a video or lack the technical skill. The dried-out paste on a ten-year-old CPU is why the fan screams once you open youtube. Clean the old paste off with isopropyl alcohol not vodka, put a pea-sized amount on the die not 4gr, and reseat the cooler. The GPU also need a similar ritual, but watch a youtube video how to do it. (Every GPU that existed has a video now)
3. Replace the battery
On a laptop, the battery is probably dead or close to it. If it is swollen, stop using the machine. Take the battery out and dispose of it like a civilized person. Do not charge a swollen battery if you dont want to burn your place.
Also replace the CR2032 coin cell on the motherboard. It keeps the clock and the BIOS settings alive, and it dies after a few years. This simple cause was how i bought over 400+ computers for few dollars because they evaluated it as "for Part".
4. Check the capacitors
If the board is from the capacitor plague era, replace the electrolytic capacitors, even the ones that look fine. Bulging or leaking caps can explode. The parts cost little. What it costs is your time, so budget the time. If you cannot solder, learn or pay someone who can.
5. Look at what the machine actually has
If it is an Intel Mac from 2006 to 2020, run Cydia before you install anything. Get the current build from the latest release of Meridian. Its source is in Application/Cydia. It runs before any OS, from a FAT stick. It reads the battery, fans, display, storage, and the rest, then writes a plain-language repair report. It never writes to the machine. On other hardware, it only reports the UEFI-level probes, so it will not tell you everything yet.
Then check the rest of the parts yourself:
Use the release image on a USB stick. Boot it, log in as root with no password, and run:
pciconf -lv | less
dmesg | lessWrite down the network card, the wireless card, the storage controller, and the graphics. Each one either has a driver or it does not.
Install CURRENT, it has the last drivers and improvements.
Stable is for people that run Servers or people that don't want to handle update with breaking change. You will be on the breaking change.
7. Update the firmware
If it is an Apple, boot it into macOS once and install the latest updates. macOS applies the firmware updates for you, and that is the one job I will ever give macOS on a FreeBSD machine.
Old Firmware have bugs and Apple fixed them years after the product went EOL.
For any other computer, update the BIOS, or flash coreboot if your board supports it. Then update the firmware on the NVMe or SSD using the vendor's tool. Some of the worst problems I have hit were fixed by a firmware release that is twelve years old. Some drives have timebomb bug that will wipe your data, other have flaky state-machines that got fixed much later.
While you are in the BIOS, set SATA to AHCI, since RAID mode often hides the disk from FreeBSD. Pick UEFI and stick to it. (That what Meridian boot on).
8. Replace the spinning rust.
If the machine still has an HDD, change it. Even a 2TB hard drive loses to a 256GB SSD on an old machine. The SSD is faster, quieter, and it does not die on you during an install. If you have 2 slots, keep the HDD as a slow backup.
9. Max out the RAM
Fill every slot with the largest modules the board accepts. Check the maximum in the vendor's spec sheet before you buy, because the board decides the limit and speed, not the sticker on the module.
Buy the type the board takes, then take the photo and post it social media. A screenshot that says "128GB RAM installed" make your look rich to anyone who does not check the type.
FreeBSD needs around 200mb in idle.
10. Pick a filesystem for the box you have
ZFS is the right default when you have the memory and disks to justify it. On a small, old machine with bellow 8gb ram, UFS is the correct FS.
Anything over 8 , you go with ZFS.
Have a nice time realizing how your old machines is more responsive than a windows one.
r/freebsd • u/Lars_Galaxy • 2d ago
I've dabbled in BSD before, and used BSD based products, before, however had no idea how awesome it is. Decided to try out a FreeBSD VM, on ARM architecture no less, and I'm loving it so far. Unlike most Linux distros it only runs and does what I tell it to, and similar enough it's not daunting. I do love how few resources it uses in comparison to linux VM's I run, and it can do pretty much anything those can, though in fairness most ARM linux distros scale back the bullshit considerably for their ARM releases. Keep up the good work FreeBSD peeps. Looking forward to trying out the official desktop version on an old laptop when it comes out and see how it does.
r/freebsd • u/emiliot490 • 2d ago
Intel 9560 on 15.1 dropped to 25 Mbit, will this get fixed?
ThinkPad T490 with an Intel 9560. On 14.4, 15.0 and an early 15.1 install I got over 200 Mbit with native iwlwifi, no wifibox. Same install method every time.
Latest 15.1 install: 25 Mbit. Only way to get speed back was wifibox, and that makes resume after suspend take 5-6 seconds before I can do anything.
The 15.1 man page now says 11n/ac is only for 22000 and newer chips, so the 9560 seems to be left out now.
Is this getting fixed, or is wifibox the answer for this card from now on?
r/freebsd • u/grahamperrin • 2d ago
… there's no last minute miracle and it looks like the desktop install option will now target FreeBSD 15.3 in mid-2027. …
FreeBSD Foundation Laptop Update – 2026, third quarter : r/freebsd
r/freebsd • u/grahamperrin • 2d ago
… This is the first project update using the new, quarterly format. …
https://freebsdfoundation.github.io/proj-laptop/quarterly-updates/2026-Q3
GitHub origin: https://github.com/FreeBSDFoundation/proj-laptop/blob/main/quarterly-updates/2026-Q3.md
r/freebsd • u/grahamperrin • 2d ago
Video, twenty-five minutes, with subtitles/closed captions and a transcript (AI). Recorded in September 2026, published yesterday.
AI
corrections welcome.
The Foundation's post in September included a link to the 123 presentation slides.
YouTube-provided summary (AI, reformatted by me)
This presentation from EuroBSDcon by Alice Sowerby provides an overview of the EU's Cyber Resilience Act (CRA) and its implications for the FreeBSD project and its community. The CRA is a regulation designed to improve the cybersecurity of products with digital elements sold in the EU, imposing significant potential fines for manufacturers that fail to comply (0:39).
Key takeaways from the presentation:
scope and timeline: while the regulation entered into force in 2024, it is applied in stages; a major deadline for reporting actively exploited vulnerabilities begins September 11, 2026 (2:27)
roles: the CRA distinguishes between manufacturers (who are heavily regulated) and open-source stewards (like foundations that systematically support projects), with the latter having reporting obligations but no associated fines (4:46)
impact on FreeBSD: FreeBSD is considered an upstream project and is not directly obliged to follow the CRA. However, it will likely face downstream requests from manufacturers seeking security documentation, SBOM (Software Bill of Materials) data, and help with vulnerability patching to ensure their own compliance (7:16)
Foundation readiness: The FreeBSD Foundation has established a readiness project to ensure compliance, develop SBOM tooling, and coordinate with the project's security and core teams to handle future incident reporting requirements (13:21)
call to action: Sowerby encourages community members to learn about the CRA, support the development of SBOM tools, and help educate manufacturers about their responsibilities to ensure they are prepared ahead of deadlines (18:42).
r/freebsd
•
u/Bright-Boss-720
•
4d ago
Hello everyone
I've been using Linux for quite some time, and lately I've been seriously considering switching to freebsd as my daily desktop operating system.
I'm interested in freebsd not only because I want to try something different, but also because I'd like to learn more about the bsd ecosystem and experience freebsd as a desktop os.
Before making the switch, I'd like to hear from people who actually use freebsd on their personal computers and laptops.
I'm planning to install freebsd on my laptop, which has the following specifications:
Intel Core i7-12650H
4060 rtx ram 16, 1 tb nvme ssd and intel ax201 wifi
I'm considering kde plasma 6 with wayland.
I've previously experimented with freebsd on this laptop, and Intel graphics with Wayland worked surprisingly well for me.
How is the current kde experience on freebsd? Are there any major limitations compared to running kde on Linux?
My goal is to use the Intel integrated GPU for the entire desktop environment and everyday applications, while using my rtx 4060 on demand for games and GPU intensive applications.
Something similar to prime render offloading on Linux.
How practical is this setup on freebsd? Does anyone have experience with nvidia gpu offloading on a laptop?
My wireless card is ax201 wifi
How reliable is the iwx driver in everyday use? I'm also interested in suspend/resume, Bluetooth, touchpad support, brightness controls and battery life on modern Intel laptops.
During my previous freebsd experiments, audio worked, and I could control the volume through kde's volume interface.
However, my physical keyboard volume keys didn't seem to work properly.
Is this a common freebsd laptop issue, or does it usually require additional configuration?
5. Package download speeds
This is something I found particularly strange during my previous installations.
My internet connection is approximately 100 Mbps, and speed tests showed normal speeds. However, downloading packages through pkg was extremely slow, usually around 100–400 kb
I also tried fastest_pkg to find a faster mirror, but the fastest mirror I could find was still around 400 kb
Has anyone experienced something similar? Could this be related to mirror selection, ipv4/ipv6 routing, or isp peering
Considering my hardware and intended usage, would you recommend freebsd 15.1 with kde as a daily driver operating system
I'd particularly appreciate hearing about real world experiences, potential hardware compatibility problems, and things I should be aware of before making the switch.
I'm not expecting freebsd to be a drop in replacement for Linux, and I'm perfectly willing to learn its differences. I just want to understand what I'm getting into.
r/freebsd • u/swinit-dev • 4d ago
Acho que "Microslop" é meio idiota, rsrs.
Email:
Olá Microsoft,
Estou escrevendo para dar um feedback honesto e agradecer sinceramente.
Antes de mais nada: obrigado por forçar agressivamente a atualização para o Windows 11 e encerrar o suporte ao Windows 10. Por causa dessa decisão, finalmente saí do seu ecossistema, e foi a melhor coisa que já aconteceu aos meus computadores.
Fui usuário do Windows a vida toda até ser forçado a procurar alternativas. Instalei o Linux (Ubuntu) no meu Dell Vostro 3500 de 2010 (Intel de 1ª geração). Funcionou perfeitamente. Mais tarde, migrei minha máquina principal para o FreeBSD. Hoje, uso o KDE Plasma no X11.
Deixe-me explicar por que eu nunca mais voltarei para o Windows:
Atualizações: Eu atualizo meu sistema quando eu quero, não quando uma janela pop-up decide interromper meu trabalho. Meu computador reinicia ao meu comando.
Desempenho: O processador do meu laptop de 2013 está atualmente em 784 MHz em modo ocioso porque eu mesmo configurei o gerenciamento de energia. O Windows o faria atingir 3,5 GHz apenas para executar a telemetria e o indexador de pesquisa.
Privacidade: Não preciso usar ferramentas de terceiros para desativar a Cortana, os anúncios do Bing e a telemetria em segundo plano. Meu sistema operacional não me trata como um produto.
A interface do usuário: Não preciso mais clicar em "Mostrar mais opções" para encontrar o botão "Renomear" em um menu de contexto. Meu sistema operacional é consistente, modular e respeita a inteligência do usuário.
Bloatware: Não preciso desinstalar a Barra de Jogos do Xbox, o OneDrive ou o Candy Crush de um sistema operacional "Profissional".
Você vê como seu sistema operacional ficou ruim? O Windows XP era bom porque foi criado para ajudar as pessoas a trabalhar. Mas, ao longo dos anos, vocês colocaram todos os usuários em uma prisão digital de anúncios, telemetria e atualizações forçadas.
Vocês tentaram me prender no ecossistema de vocês. Em vez disso, me motivaram a aprender computação de verdade, compilar meus próprios binários e realmente ser dono do meu hardware.
Eu uso FreeBSD, aliás.
Atenciosamente,
swinit
r/freebsd
•
u/TheAtlasMonkey
•
5d ago
Over two decades ago, I was the first person to import a CNC/3D printer machine into Morocco, and, to my knowledge, the first private citizen to bring a 3D printer into Africa. I paid over $5,000 in customs fees just to get it across the border.
The customs officers had absolutely no idea what these machines were. They even asked me if I could manufacture weapons with them. It took a lot of contacts and favors just to get the machines released.
People looked at me like I was some Chinese asset sent to destroy the Moroccan artisan economy with Alibaba products.
The reality was much simpler. I wanted to create something I had imagined, something that was difficult to explain to traditional artisans who had never touched SolidWorks or 3ds Max in their lives. I'm was Junior Robotic Engineer then.
I received an huge amount of hate. Nobody wanted to help or advise me. The merchants of complexity had convinced people that if I learned the "secrets of the craft" I would destroy their entire economy.
Fast forward two decades. I recently visited the same places where I had been banned.
They now have industrial-grade machinery. Their children have learned CNC and 3D modeling, and they are producing in two months the same beautiful patterns that took their ancestors two years to complete.
The artisans are healthier because they spend less time exposed to toxic substances, wood dust, and fumes. Their productivity has exploded, and the cities are covered with beautiful new art.
The craft didn't disappear. It evolved and became more affordable for everybody.
So what does any of this have to do with FreeBSD?
I'm watching the exact same mentality repeat itself with AI.
The artisans eventually adopted the future. The ones who refused either disappeared or found customers willing to pay for their sweat instead of their output.
Today, we have people online harassing anyone who admits to touching AI, as if using a tool automatically invalidates everything you produce.
Some of these people have no craft to protect. Their only competitive advantage was knowing English, navigating documentation, and chaining ideas together. Now that a machine can do some of that, they suddenly want to defend the purity of human craftsmanship.
If AI spoke Haskell, nobody would complain, because you already need a certain level of self-harm to learn that syntax.
Four or five years ago, while trying to get Linux running on the PlayStation 4 and 5, I discovered bugs in the Linux kernel.
ChatGPT didn't exist back then. I wrote the security reports in my own English and submitted them to two linux kernel developers. They read the reports and dismissed them. They couldn’t understand what I was describing. Posting that in public is how i will become unfamous by showing no discipline and allowing script-kidding to cause havoc.
So I moved my shit to FreeBSD, MacOS and later DragonFlyBSD. I started contributing, then became a committer, and continued working on hardware and kernel development.
Years later, an AI lab patched the same family of bugs I had reported and found without AI.
My technical findings were dismissed because I couldn't explain them in English, while today people complain about the very tools that could have helped bridge that gap.
I'm a polyglot, and I use AI as a tool and a translator. It helps me express my ideas in English without spending hours fighting the language instead of solving the actual problem.
People tell me "Why don't you just learn better English ?"
I did! But now LLM learned that English from us and started using it everywhere.
Their turn. Learn the other five languages I speak so we can communicate better.
Do I use AI now ? YEs, but not for writing all code or what i'm thinking. Everybody does, your search engine is AI powered.
But I dont let LLM give me solutions first. That is how you become a copy machine instead of an engineer.
I want to understand the problem, investigate the hardware, read the documentation, and develop my own solution. Then I can use tools to challenge my reasoning, improve my communication, or help with repetitive work.
Over the past year, we have made big progress bringing proper Apple Intel hardware support to FreeBSD 16. Enji Cooper , Adrian Chadd , and Warner Losh helped a lot along the way.
If you have an Intel Apple computer from before 2020, FreeBSD 16 now supports far more of its hardware than it did a year ago. Wi-Fi and Thunderbolt are among the remaining drivers I still need to submit.
Today, FreeBSD’s Apple drivers among the most compact and complete open-source implementations available, outside Apple's closed-source macOS stack.
And here's the part that matters: none of that code was AI-generated.
I wrote most of it myself by studying hardware behavior, reading documentation, experimenting and understanding how the machines actually work. Whenever I relied on prior art, I attributed it.
Apple has one of the most hostile hardware ecosystems for open-source developers, but also one of the most consistent. Once you understand their design patterns and hardware conventions, you can bring support to the full generation. Apple machines behave more like a Playstation than a PC.
Next, I'm moving to Apple ARM hardware, which I have already been daily-driving for six months.
Twenty years ago, people thought a CNC machine would destroy craftsmanship. Today, people think AI will destroy engineering.
It won't. What will happen is that we have 1-2 years we will reach a cap in software engineering where all those copy/pasters are going to stall. I see that already with AI labs that keep reinventing concept that humans did years ago.
Instead of being parasite like and start alienating people that use AI. use AI to fill all the boring part, revisit part of the system that nobody touched for years.
Cheers
PS: the image of this post is a traditional mosaic that used to take 2-3 months from expert craftmen and cost around 5000$, now you can get the same in 1 week for around 300$. The artisan also can sell 100 of those per month instead of 4 per year.
In the end, i better see a CNC machine drilling stones all day long, than having a 7 years old child spending his childhood with a shisel and a hammer instead of going to school or playing with a playstation.
r/freebsd
•
u/kraileth
•
5d ago
About two weeks ago I wrote an article and finally published it this weekend. It covers some problems that I've had with keeping systems up-to-date in the past, my thoughts on the shortcomings and some proposals for what could be improved. It's meant as food for thought that would ideally lead into a discussion of what the upgrade process should look like in the long term.
The context is that I was fortunate enough to get the chance for a little experiment: handing out a good dozen FreeBSD-powered laptops to employees of a small organization. While I really didn't want to miss the opportunity, it also meant that planning, deployment and ongoing support will be my responsibility on the weekends / at night. So it probably isn't much of a surprise that I want to work towards minimizing the regular admin work required to reclaim a bit of precious spare time. One crucial aspect of that obviously is keeping systems up-to-date.
I want to note that I wrote this before learning about Vermaden's pkgbase-update which is an interesting tool (see here). While I like his practical approach that makes use of what we already have, I'd argue that working towards the goals set in my article still makes a lot of sense.
Feedback (or a discussion here on Reddit) would be appreciated. And if anybody wants to get in touch regarding the laptop project, feel free to PM me (depending on the load of my actual job, I might be somewhat slow to respond, though).
r/freebsd • u/grahamperrin • 5d ago
Video, two minutes, silent. u/gyptazy
Via https://www.linkedin.com/posts/gyptazy_bhyve-freebsd-sylve-share-7526627043313229824-TTVL/ (Florian Paul Azim – gyptazy – Hoberg)