r/fpv • • 7h ago

Meme FPV pilots vs DJI pilots

109 Upvotes

r/fpv • • 12h ago Diamonds are Forever Bravo

DJI Goggles 3 root

117 Upvotes

I’ve been working on opening up the DJI Goggles 3, and wanted to share it with the community rather than keep it to myself.

Full root on the stock firmware, confirmed working on the latest and earliest versions. No hardware mod, no opening them up, just usb cable.
Root isn’t persistent yet, and it’s all still pretty janky — this is an early alpha. I’m sharing it early mostly to keep myself motivated and to start collecting testers and feedback.

I’ve been building toolya, a free in-browser tool (WebUSB, nothing to install) that handles rooting and modding for the G3

Mods so far: custom boot background, DOOM, and a semi-working PC screen stream over USB (just PoC, real stream is in progress).

And it’s a platform: you can write your own mods, and others can install them straight from the web.

This is free and for the community.

https://toolya.dev

Source / instructions: https://github.com/grom-labs Discord: https://discord.gg/dDPb7CnmBb


r/fpv • • 1h ago

Unpopular opinion: Most cinematic FPV drone footage looks like crap

12 Upvotes

I’ve owned a beginner FPV drone and wow it was some of the most fun I’ve ever had

I have a lot of respect for the guys who fly technical lines and pull off impressive manoeuvres.
But then you have people filming a subject, a moving car or landscape, and suddenly they start flipping the damn thing and doing 360s. It’s like, come on.

I understand that FPV drones can do things that traditional DJI camera drones can’t, and they can really immerse you in the footage. But when you start throwing unnecessary backflips and rolls into a cinematic sequence, it completely ruins the cinematic look for me.
There’s a difference between showcasing your flying abilities and creating genuine footage.
Personally, I think what makes a great cinematic drone pilot is their ability to make you forget the footage was even recorded by a drone. The movement should COMPLIMENT the subject,NOT distract from it.

I’ve previously owned a DJI Mini 3 and now own a DJI Air 3.
Does anyone else feel the same way?


r/fpv • • 14h ago

Almost 20 min fly time with my 5 inch quad :(

147 Upvotes

r/fpv • • 13h ago

any given sunday

57 Upvotes

music is never say die vol. 7 . quad is betafpv...


r/fpv • • 3h ago

Fixed Wing Fixed wing FPV Config

Thumbnail
gallery
7 Upvotes

AeroScout
5 inch monitor
Custom built camera harness for tail fin
Modified GoPro over-wing mount
Spektrum DX6 w/ custom built monitor stand


r/fpv • • 4h ago

Multicopter FPV mod for Ocarina of Time Remake! The project is open source and based off KaeGae mod loader

7 Upvotes

There's quite a bit of settings you can tweak with its settings. Though, only controller is supported at the moment, 😅. My repo is oot-remake-modding on Github! Please contribute if you can!


r/fpv • • 8h ago

Video First Flight Ever, I’m hooked.

Thumbnail
youtu.be
13 Upvotes

r/fpv • • 15h ago

New Sim Kit

Post image
36 Upvotes

Hey all!
Just wanted to show off the new 04x pro using a coiled hdmi mini cable that conveniently threads a 9v dc -> pd usb-c adapter into the battery bank $$$

Fpv ftw B)


r/fpv • • 1h ago

Avoid the BETAFPV Aquila 20 , VTX dies on throttle punch, support wasted a month, and now I'm stuck with useless drone/ additional batteries

3 Upvotes

I’m beyond frustrated with BetaFPV right now and want to see if anyone else is dealing with this hardware flaw on the Aquila 20.

Every single time I make a sudden movement or punch the throttle, the VTX video feed completely dies and goes black. Once it cuts out, it never comes back on its own, I have to physically unplug and replug the battery/camera just to get video again.

For the past month, BetaFPV support has been stringing me along, treating me like an idiot and insisting it was just a "software/firmware issue." Because I trusted them and kept testing after updating the firmware, the VTX kept cutting out mid-flight while I was moving, causing multiple blind crashes that eventually broke a motor.

I finally proved it's 100% a hardware design/power-delivery defect: I put the drone stationary on my desk, zero crashes, zero movement, and punched the throttle. The VTX immediately died from the sudden current draw / voltage drop.

To make matters worse, I bought extra batteries specifically for this kit that I can’t even use with any other motor and propeller setup, so I'm completely stuck with useless gear.

BetaFPV wasted a month of my time blaming software for a clear hardware failure, my quad has a broken motor, and my extra packs are worthless. Has anyone else experienced this voltage-drop VTX blackout on the Aquila 20, or actually managed to get BetaFPV to take responsibility for their defective hardware?


r/fpv • • 3h ago

Preparing in fob

Post image
3 Upvotes

Now I have Pavo 20pro(old one)
Mobula 8
Meteor 75
Only have moonlight but 1S on the way
Goggle X & L glass
Jumper t15
Is it good for a beginner?
I also have a Bamboo X2D printer for accessories replacements which can print carbon materials


r/fpv • • 2h ago

Extremely Unbalanced Brand New Battery

Post image
2 Upvotes

3 days ago I drove to the tattu warehouse to pick up x7 brand new Tattu 650Mah 4S 95C 15.2V(Hv) Long Lipo Battery | Xt30 Plug | Fpv Classic Batteries. Finally got around to throwing them on the charger tonight and one of the seven batteries had this voltage on the cells

Cell 1: 3.796v
Cell 2: 3.791v
Cell 3: 3.430v
Cell 4: 3.792v

The other six are completely fine. What should i do? Should i ask for a replacement shipped to me? Should i just balance them out? I feel like I should be getting better than this on a premium brand new battery.

Thanks


r/fpv • • 14h ago

Capacitor Legs Overheating

Post image
16 Upvotes

Hey y’all! I’m building a 10inch the same way Hoarder Sam did in his video, but the speedy bee capacitor legs keep over heating and melted on my first attempt and fried all the electronics resulting in a motor fire. I got a new stack and motors and just did a test flight with more heat shrink insulation, which started smoking and melting off the capacitor leg after 3ish seconds of flight. I’m using a 6s 22.2V 5000mAh battery. I didn’t add the video system to it yet just in case. The smoke stopper gave the green light both times. Do you have any advise? Thanks for your help and what y’all do for the community


r/fpv • • 1d ago

My hands were kinda freezy 🥶

602 Upvotes

r/fpv • • 6h ago

Analog video quality

Thumbnail
youtu.be
2 Upvotes

Hi all, I posted before when building my 7" analog cruiser. I'm a bit disappointed in the video quality. I have a Foxeer Reaper Extreme 3watt vtx, and a caddx ratel pro camera. I bought TBS Airscrew 5.8GHz LR SMA Antennas attached to the aircraft and goggles. And TrueRC X-AIR 5.8GHz MK II Antenna for my HDZero goggles 2.

It seems my range before breakup is low, and the video quality is hard to get used to.

Am I being a baby or is the video normal for my setup? What can I do to improve?

Thanks


r/fpv • • 17h ago

Question? How much have you spent total?

16 Upvotes

I think im about 5-6k into, probably more. What about you guys?


r/fpv • • 2h ago

Data stream from O3 AirUnit?

1 Upvotes

Hey everyone, I'm looking to see if anyone knows of any jailbreaks or workarounds that would allow me to get a direct stream from the DJI O3 airunit (ie pulling it off of a wire, rather than proprietary goggles needed to see the video). I know that people have been able to exploit a vulnerability regarding the FCC power output on the goggles, but I cannot seem to find anything for the AirUnit itself.


r/fpv • • 3h ago

Help! Join my game!!

0 Upvotes

I wanna play drone-party.fr its a browser game I saw a promotion for but nobody is online. I think you guys would like it so I was hoping someone here would play with me!


r/fpv • • 12h ago

Solved Tx 12 gimball protectors

Post image
5 Upvotes

Today i was looking for gimball protectors for my tx 12 and couldnt find ANYTHING online, low and behold i came up with an idea that actualy works.

I used the gimbal protectors from an beta fpv lite radio controller and they fit somewhat decent, as in get the job done, hope this fun fact helps anyone 😊


r/fpv • • 10h ago

Question? Building a 3.5” Seeker35 Hybrid Freestyle/Cinematic — Need Advice on a 4S Setup

Post image
3 Upvotes

Hey everyone!
I’m planning a custom build around the DeepSpace Seeker35 frame, and I’d love some advice before ordering the components.
My goal is to build a 3.5-inch quad that feels as close as possible to a 5-inch freestyle drone, while still being capable of smooth cinematic flying.
I want freestyle to be the priority, with the option to carry a DJI Osmo Nano action camera for recording. The camera should be removable so I can fly lighter when I don’t need it.
Planned components
● Frame: DeepSpace Seeker35 (Wide-X)
● FC/ESC: GEPRC TAKER G4 35A AIO (2–4S)
● Motors: Undecided — considering 2004 or 2006
● Battery: 4S, probably 850–1100mAh
● VTX: HGLRC Zeus Nano (analog)
● FPV camera: Caddx Ratel 2 or RunCam Phoenix 2 Nano
● Action camera: DJI Osmo Nano with a removable mount
Questions

  1. Would you recommend 2004 or 2006 motors for this particular build?

  2. What KV range would you choose for 4S with 3.5-inch tri-blade props?

  3. Is the 35A ESC sufficient for this motor/prop combination?

  4. Which battery capacity would offer the best balance between performance and flight time?

  5. Has anyone used the Seeker35 frame with a custom 4S setup?

  6. Is the Wide-X version a good choice for freestyle?

  7. Any recommendations for a lightweight, secure quick-release mount for the DJI Osmo Nano?

  8. Would you change anything in this component selection?
    I’m looking for a responsive, powerful build that can handle freestyle without becoming too heavy or sacrificing too much flight time.
    I’d appreciate any real-world experience, motor recommendations, or build examples.


r/fpv • • 16h ago

Groundstations for the win !

Thumbnail
gallery
7 Upvotes

Finally finished my Groundstation :) everything in one Case… superb for driving with my E-Bike to my spots :)

All Parts are self-constructed and printed.. also the Powerbank :)


r/fpv • • 6h ago

Question? Best goggles for glasses?

1 Upvotes

I'm looking to upgrade from my Skyzone Cobra SD I understand that box goggles are the best for people with glasses, but I need something more inconspicuous and low profile than my Cobra SDs. I also want something with a better reciever.

My glasses aren't that thick and are the flexible titanium kind.

Are my only options Box goggles or Low profile goggles with diopters but I really don't want to have to always put on my glasses when Im not flying.


r/fpv • • 1d ago

Tinywhoop Second day flying fpv was a blast. Spent way too much time on liftoff. Should have got myself a tinywhoop a long time ago

79 Upvotes

- air75 ii race with 580 mah lava 1s

- emax e8

- ev800d


r/fpv • • 21h ago

Erstmal selbst gelötet. Ist es oke?

Post image
16 Upvotes