r/focuspuller • • Mar 18 '26

none I got to pull focus for Deakins!

Post image
399 Upvotes

Roger and James held a cinematography workshop for Georgia State students and I was lucky enough to have the opportunity to not only talk to them and ask questions, but also to pull for him! What a dream come true, they were super nice! Beyond thankful for such an incredible opportunity!


r/focuspuller • • Sep 03 '26 Bravo Mindblown

Knowledge and tips šŸ’” Experimenting with 3D printed case foam

387 Upvotes

So this is a new idea I have’t seen anyone else try yet. Recently learned you can 3D print foam. Or, something very similar to foam at least. It’s a ā€˜foaming’ TPU that expands as it leaves the nozzle. Sort of a cross between foam and rubber. Very shock absorbent.Ā 

3D modeling the CTRL3 cutout took ages. The other stuff was easier. Time spent printing was around 48 hours as this material has to be laid down very slowly. The real question now is how it will hold up. I’m feeling reasonably confident it’s not going to tear or come apart, but curious how it will tolerate being in a hot truck in the summer. Its melting point is above 400 degrees Fahrenheit, so I’m more worried about it shrinking or deforming than anything else. Still, I’m optimistic it’s going last based entirely on vibes.

Pros:

  • Literally perfect cut outs for whatever you want. (Can include sculpted vertical curves unlike most traditional custom foam manufacturers.)

  • Cheap! Filament was around $40, DIY Trekpak was around $25.

  • Looks clean as hell

Cons:

  • 3D modeling everything is very time consuming, especially at the amateur level. It probably took me around a week of on and off work in Fusion to get the hand unit right.

  • Printing is also time consuming, and TPU is famously finicky to work with.Ā You'll probably have a failed print at some point.

  • Probably obvious, but you can only print a foam piece as big as your 3D printer’s bed. (Hence the Trekpak approach.)

  • TBD heat resistance

The filament is Siraya Tech Flex TPU Air. Hopefully stating the obvious, but I am not affiliated with them.

Technical details for nerds šŸ¤“ (all of you probably):

  • Printer = Bambu A1 mini

  • Used a filament dryer

  • Nozzle Temp = 270°C (max foaming, softness)

  • 12% gyroid infill

  • Used Siraya tech's filament/printing configuration that did most of the slicer work for me. (Strongly recommend)

  • Fed filament directly into printhead with no PTFE tube for minimum resistance, and had to put a fan on the printer to avoid heat creep during the 10+ hour prints. (Photo)

  • Painters tape on print bed to avoid sticking

TL;DR you can 3D print foam now. It's a pretty decent alternative to custom foam manufacturers that's cheaper, more customizable, and modular. But you had better be crafty. šŸ’…

Edit: did some thermal testing. Follow up post available here. But the short version is that heat and cold did not pose any major issues for this material!


r/focuspuller • • Jun 12 '26

#furking You can just build your own cart

Thumbnail
gallery
276 Upvotes

For years I’ve had a really shitty little plastic cart for chargers, and after my last show the small wheels had broken yet again and i decided it was time. Based on a build someone posted on here years ago, I’ll find them and tag them in the comments.

It’s an Ikea bror tranchercart with better wheels and cartpets. Got the actual Ikea cart half off from their 2nd hand dept. Wheels, carpets, hooks and power distro from their scandi home depot equivalent Ā«BiltemaĀ». All in it was about €300 and six hours of work.


r/focuspuller • • Sep 09 '25

Hot Build Rivian Arm car Build

Thumbnail
gallery
270 Upvotes

Got the privilege of getting to help create Motionstates Rivian arm car. As a direct collaboration with Rivian this was Built this from the factory.

-Venice 2 -Modified optimo 23.5-110mm T2.8 -Hi-5 W/ Ria, Focus, iris, Pola -Moon smart focus range finder (Best purchase -Head operator has zoom -Zmu-4 & Rf motor for Stills camera Zoom -I modeled and 3d printed a Mount for GLi slate for camera control and stills control -Teradek prism Bond 6 from Satellite video feed

I’ve worked around a lot of arm cars and this one has knocked my socks off Inspire 3 built into the Frunk with built in 18ā€ monitor

Every seat has 2pin,Dtap,XLR, and SDI built into it factory. The AC seat is in the trunk which has enough room for my legs to fully extend (i’m 69ā€ tall)

I’m sure i’ve left out some details but thought i’d share. I’ve shot with it nearly 25 shoot days now, trunk seat even has air vents (finally…)


r/focuspuller • • May 20 '24

#furking Look ma! I made it in Hollywood!

Thumbnail
gallery
248 Upvotes

It's a huge honor to be recognized by the Television Academy and I'm very humbled to have received this award. This is a huge achievement not just for me but for all the focus pullers and camera technicians to be finally recognized for their artistic and creative contributions to the final image on the screen. This is only the beginning and I look forward to seeing the rest of my sisters and brothers be recognized in the future.

I have to thank my Camera Operator Keyan Safari for requesting that I be officially recognized and to all the other operators and focuspullers who were recognized on this momentous project.

furking #furkingwithguruji #local600 #unionstrong


r/focuspuller • • Mar 16 '25

prep Starting prep with that new car smell

Post image
247 Upvotes

r/focuspuller • • Jul 31 '25

Hot Build Y’all ready to get xtreme!?

Post image
241 Upvotes

r/focuspuller • • Feb 01 '24

Hot Build My Run and Gun setup…

Post image
237 Upvotes

I got a tactical vest off Amazon, 3D printed mounts for 3 gold mount plates on the back. Battery, Teradek, and Preston Light Ranger all sit on my back and I run a single cable loom down to my SmallHd 703 Monitor mounted on my HU3.


r/focuspuller • • Oct 13 '24 Wholesome Seal

Hot Build Im making a focus pulling sim in unteal

217 Upvotes

I'm a union utility, but as most people know, it's SUPER slow right now and I figured a good way to learn more/ improve upon my self is to make a sim to practice pulling focus! I plan to make it open source and upload all the files and instructions once I get the program to work better.


r/focuspuller • • Aug 25 '26

On set pix I love being a 1st AC but the commute is awful

Post image
212 Upvotes

r/focuspuller • • Sep 03 '25

Hot Build I’ve finally Peaked

Post image
209 Upvotes

The Eagle has landed


r/focuspuller • • Sep 12 '26

Knowledge and tips šŸ’” Update: thermal stress testing 3D printed foam šŸ”„ā„ļø

Thumbnail
gallery
208 Upvotes

Ok, y’all made me curious. I did some thermal stress tests on the 3D printed case foam. (Original post here.)

For all of this, I’m using a print that failed when it was nearly finished. So the infill pattern is exposed. There’s also no gear in the slots. Does this affect the tests? Maybe, but probably not enough to matter. (Also I’m not putting my MOTR.S Max in the oven no matter what you tell me.)

šŸ”„ Heat test

I started by measuring the foam with my calipers, then put it in my oven at about 150° Fahrenheit. Based on research from passenger cars, that’s probably about the hottest a camera truck would get in the summer (God willing). Checking at both the 30 and 60 minute mark, the foam remained pliable and bounced back to its original shape like normal. Measurements confirmed it did not shrink or expand. I stopped the test after 60 minutes because I sort of have a life. Measured with a meat thermometer (lol), the foam’s internal temp was also 149.1°F by the end.

While I only tested at 150°F, I feel pretty confident you could go up to 200° with no issues. Its melting point is twice that. Anecdotally, it felt only slightly more pliable than at room temp so I definitely think there’s some padding here.

ā„ļø Cold test

I put it in the freezer for around two hours at 15°F. (TIL my freezer is warmer than it’s supposed to be šŸ¤·ā€ā™€ļø) This affected it more than I expected. Like a rubber, it got stiffer and less flexible. But thankfully, not brittle. It was still pliable. Shock absorption was also slightly reduced, but still acceptable. It maintained its size within 1mm, which is within the margin for error.

TL;DR

It’s fine, don’t worry about it. Your batteries are going to explode before this stuff melts, and your lenses will freeze before it does. šŸ”„ā„ļø


r/focuspuller • • 8d ago

New Stuff Pulling focus on iPhone Duo

Post image
198 Upvotes

for legal reasons this is a shitpost


r/focuspuller • • May 17 '25

New Stuff Modular Drawer System - Best cable organisation on your magliner

Thumbnail
gallery
196 Upvotes

Camera assistants, I got you! I designed aĀ modular drawer systemĀ perfect for organizing all your cables, adapters, and rigging bits.

It’s stackable, labeled, magnet-ready, and fits perfectly on aĀ Magliner cartĀ without taking up too much space. No more digging through pelicans or ARRI bags for a SDI or LEMO šŸ˜…

This is just theĀ small part of a bigger project called MARIO CARTĀ I’m working on—more modules coming soon!

I recommend printing it inĀ PETGĀ for better UV resistance and durability, especially if it’s going to be used in sunny or outdoor conditions.

Fully 3D printable. If it looks handy, I’d love a Boost on MakerWorld šŸ™Œ

šŸ”—https://makerworld.com/en/models/1426064-modular-drawer-system-best-cable-store-solution#profileId-1482261


r/focuspuller • • Aug 13 '26

On set pix Hey bro I heard you like frame lines…

Post image
194 Upvotes

r/focuspuller • • Jan 28 '25

New Stuff New Base rate structure for 2025

190 Upvotes

Let’s face it friends. The industry is changing and we need to adapt. We need to be more mindful of budgetary restrictions so our services can be more accessible to a wider range of productions.

Introducing 1st AC Base rate for 2025. You get the same great experienced crew member with a more flexible pricing structure to cater to the changing needs of production. Starting at just $850 I will show up at call time and perform the basic duties for 10 hours with a short 30 minute break at the conclusion of the 6th to eat a meal that you will provide.

For more demanding productions there are 5 optional licenses that can be purchased to unlock my specialty services. These can be unlocked for periods before or after lunch, daily, or weekly.

Critical focus: If you need shallow depth of field and/or to work in a low light environment this license will allow for you to open the lenses past 2.8 and I will still keep it sharp for you. I will ask for marks less and just nail it on the first take.

Recording: This license will enable me to be responsible to remotely run/stop the camera and emit an auditory signal of ā€œcamera speedsā€. No more false takes or double taps. Your operators fingers can just focus on framing up.

Clean build: This license will unlock the most stream lined perfectly rigged camera build. Color coded aks and cables that are the exact length and have right angle connectors coming out at the ideal angles. 1 #cleanbuildchallenge Instagram post included.

BTS: For productions that cannot afford to have a dedicated BTS photographer as part of the crew, this license will unlock my still photography services. I will bring along my Fuji x100 and take at least one good new Tinder profile picture for the DP.

Humor/positive vibes: Most productions can benefit from a little humor and positivity. This package will get you some good laughs and will make our day together that much more enjoyable for everyone. I will even pretend to understand the creative and believe in your project no matter how much it makes no sense to me.

For those who want it all, the same premium package that you know and love which includes all of the above is still available for the classic pricing of $1000/10

Let me know what you guys think of the new structure, pricing and optional packages. Anything else we can offer?


r/focuspuller • • Jul 14 '26

focus station this is bull shit

Post image
188 Upvotes

can't believe i have to buy an ultra 10 to play gta iv


r/focuspuller • • Feb 24 '25

Hot Build ā€œWe need the camera in the cornerā€

Post image
188 Upvotes

Got dizzy orienting the skaterscope


r/focuspuller • • Dec 02 '24

none Battlestation

Post image
182 Upvotes

r/focuspuller • • May 09 '26

New Stuff My Weekend Project

Thumbnail
gallery
179 Upvotes

I was bored a couple days ago, and decided it was time to take a crack as my own front box.

It is fitted for the things that I use the most, but also with the ability to make custom liners that have specific dividers or uses.

I already have some stuff I want to tweak, but would love any suggestions.


r/focuspuller • • Mar 14 '25

New Stuff Update on Focus Pulling Simulator. ITS FREE ON STEAM RIGHT NOW.

174 Upvotes

Hello! Hopefully this is ok to post, the mods have been great so far, and I don't see myself posting about it again any time soon. I wanted to make this post to let you all know that the focus simulator that I have been posting about for a while is now available to download for free on steam! I cannot express how grateful I am for everyone on this reddit who were supportive of me! However, I ran into some hurdles in developing this project.

I had a couple extremely talented engineers who were helping me with the project, one of which was willing to put forth a substantial amount of money to get the project off the ground. However both of these people are very well accomplished in their field, and are too busy with other projects to stick with the project, and I won't be taking their money. There were a few reasons for this decision but I'll stress that I speak to these two about our common interests daily still, we are still on good terms and that's what matters to me.

So, I Made a big decision. I will be releasing the software for free. This comes with some caveats:Ā 

It will be glitchy as hell and not well optimized on release. You will need a reasonably powerful pc. I still plan to continue working on it in my free time, but for now it will stay in early access on steam for you to download and mess around with. you can follow the steam store page here. It should be available to download March 14th. It's playable on a mouse wheel though obviously I don't think that's the best way to practice. I am in a poor position right now however, and am now standing at the face of the thing all film makers dread… a day job.

The Interface is now a DIY project. While I am releasing the software for free, The Box you will need to assemble yourself. I am not in a great position financially and would like to at least make the money back from what I spent developing the box, so I am selling the STL for the 3d printed parts for $5. You can get that here. And for those without a 3d printer, I will be selling the 3d printed components on Etsy here. You can watch the guide to how to build the interface Here. Please bear in mind this uses a cheap potentiometer with a tolerance that isn't great, thats to keep it affordable, but it also means it's not going to line up with your lens mapping quite perfectly every time, but it should be close. And I do have a discord put together for this project that will be the best way to reach me for help if you need. When I'm free I'm happy to hop into a discord call and walk you through any issues. You can join the discord here.

And last but not least, the biggest problem with the project so far: Its windows only. Despite over 75% of those who filled out the survey saying they would rather use a mac, I sadly don't own one. A Local AC in my area very kindly offered to let me borrow theres for a while to port it over, but it became pretty clear to me that borrowing someone else's mac wasn't going to be viable. Mostly due to the fact that every time I want to update the game, I need to borrow it again. But also some other technical mumbo jumbo that I didn't feel comfortable doing on someone else's mac. So, One day if I'm in a better place, I'll buy a mac. But for now I'm sorry to say, it wont work on mac…

I have High standards for myself, and releasing these things for free/cheap alleviates the pressure I put on myself to make things perfect. While I did have my fantastic engineer friends helping for a while, nothing they did was implemented. This project was developed by me, almost completely alone and with very little money. And frankly, I still don't really know what I'm doing. I do think I got it to a pretty good point, and I'll still try and perfect it when I have time.Ā 

If you want to hear about what I'm working on, or just to supply moral support for the project you can follow the focus pull on social media. Bluesky and Instagram. It wouldn't hurt for you to share the project with your friends too, and anyone who's interested.Ā 

Thank you so much for the support! I plan to continue working to improve the playability and accessibility of the project in time. Feel free to reach out with any questions!Ā 


r/focuspuller • • Aug 27 '26

Hot Build The C-force max dragster

Thumbnail
gallery
173 Upvotes

I built a Hi-5 controlled dragster to compare the mini, the RF and the new MAX. Results coming soon


r/focuspuller • • Jul 13 '25 Wholesome Seal

none What colour would you get ??

Post image
173 Upvotes

r/focuspuller • • Jan 03 '26

New Stuff Built a small power calculator for camera builds — would love focus puller feedback

171 Upvotes

Hey everyone,

I’m a camera technician / AC and have been building a small web tool to sanity-check

power draw and runtime for real-world camera builds.

The idea isn’t to replace specs or manuals — it’s more a quick way to sense-check

things like:

• ā€œIs this still safe on a plate?ā€

• ā€œAm I pushing it with this focus setup?ā€

• ā€œWhat sort of runtime should I realistically expect?ā€

It includes:

• Common camera bodies and accessories

• Power source assumptions (onboard, 14V, 26V, ETC)

• Typical lens control *kits* (to avoid stacking worst-case motor values)

• Adjustable derate for real set conditions

I’m sharing it here because I’d really value feedback from people who are actually building these rigs every day.

Does this line up with how you think about power on set?

Anything here that feels wrong, misleading, or dangerous?

Any ECS / focus setups you think I’ve misunderstood?

One specific thing I’m also looking for help with:

šŸ‘‰ **Battery presets**

If you’re using batteries that aren’t currently listed (brand / model / Wh / voltage),

I’d love to know what people are actually running so I can add them and improve coverage.

Tool:

šŸ‘‰ https://power-vibe.vercel.app/

Optional feedback form:

šŸ‘‰ https://docs.google.com/forms/d/e/1FAIpQLSfll08upLZSWXMHzvVahlqPaKWuHh2wixlQvnhQRUF0exGB_Q/viewform

Thanks in advance — honest feedback welcome.