r/fixit • u/GotTheCeliac • 6d ago
FIXED Drawer not aligned properly?
Can anyone please help me figure out how to fix this drawer? It hella leans and I can not figure it out.
2
u/eevvmmaann 6d ago
I’m betting that th back of the track isn’t attached to anything anymore. You need to remove the drawer using the little black tabs. One goes up, the other goes down, then pull the drawer out and look inside the cabinet and see where the track screws into the cabinet then reattach.
1
20
u/Legitimate_Fill6906 6d ago
Rear screw that mounts the track to the cabinet has fallen out or stripped out.
Weight of the contents is making the shelf Teeter on the front rail screw depending on if it's pulled out or pushed in.
1
1
4
u/SparkyWrench1 6d ago
The back screw has pulled out. Remove contents from drawer. Remove all drawers. Inspect the rails and what is holding them in place.
1
2
1
1
u/TexasBaconMan 6d ago
I bet there is only one screw holding the rail onto the side of the cabinet. Take the drawer out and mount the track level with at least one more screw. Then tighten the existing screw.


6
u/BEANZ88 6d ago
Assuming either its not on track somehow or thats not the right order they may look all the same but if you took them all out chances are they are slightly different and you put them back in wrong.