r/firewater • • 3h ago

Low Wines Smell, Horribly, of Vomit

3 Upvotes

I decided to try out my new DIY half-barrel keg thumper setup with a 100% Maseca corn flour mash. After boiling off a bunch of vinegar through the copper lyne arm and thumper spear, and scrubbing out with soap and water, I decided to do a stripping run.

I split my corn beer between the thumper and the boiler by siphoning off the clear beer (fairly clear, anyway) into the boiler until I saw cloudiness in the siphon line. I got about a 5 gallon boiler charge of corn beer and left the rest in the thumper to sort of steam-distill the corn beer with itself.

Everything went pretty smoothly, although I had to abandon my goal of getting to the sweetwater when I began to smell scorching at around the time my output had tapered off to 25 proof. I immediately killed the boiler, disconnected the lyne arm, and began sniffing different parts of the boiler, thumper, and product. No scorching smell in the product, and only a little in the thumper.

I had a big beer boil kettle filled with low wines sitting on the back porch, and when my wife came home, she was immediately hit by the smell of vomit (in the damn house no less), which I guess I'd become "smell blind" to (thanks, Zoolander). Upon going out on the back porch, I was blasted with the intense, unforgiving stench of butiric acid. The low wines don't smell scorched, sure... but boy howdy do they smell horrible for other reasons.

What the hell happened here? Previous sniff tests of the mash did not indicate anything would be wrong. The output of the vinegar run smelled like, well, vinegar, and the piping smelled neutral after washing with soap and water.

Are these low wines recoverable? I was hoping to make a "tortilla bourbon" and now I'm wondering if I'll be able to produce anything at all.


r/firewater • • 13h ago

Mashing a grocery store wheated bourbon 🥃

Thumbnail
gallery
18 Upvotes

Frozen sweetcorn, malted wheat cereal and rye crackers


r/firewater • • 2d ago

New toy arrived today!

Post image
43 Upvotes

Ordered this for neutrals on my Digiboil. Excited to try it out, but it doesn't seem to seal well. Clamped down, I could hear air leaking out at the seal when I blew into the top. Might need adjustable clamps.


r/firewater • • 2d ago

Cracked Maize for shine

3 Upvotes

As the title suggests, I have been using cracked maize for making shine and wondered if there is a noticable taste difference between corn and maize?


r/firewater • • 2d ago

Can I Sub EC-1118 in for DADY in a Birdwatchers Fermentation using Lalvin’s Inoculation Rate?

3 Upvotes

I make a Birdwatcher’s wash and pitch the recommended amount of circa 80g of DADY yeast according to the calculators online and a batch of 30L. (I distil this with reflux to create neutral for gin distillation).

I was searching for a suitable substitution and the internet recommended EC-1118 as a high tolerance, neutral yeast.
The inoculation is .2-.4G/L which is considerably less than what I’ve been using.

Would I have any issues pitching at this rate with a SG of about 1.090?

Cheers.

Also, I’m in the UK and basically trying to find the best value yeast (not turbo) for making neutral sugar washes. If I’ve missed a trick, please let me know.


r/firewater • • 2d ago

Can I distill a sweet wash without issues?

6 Upvotes

I made a sugar wash and i guess i used to much sugar or my yeast was weak. I watered it down and pitched a new pack of yeast and its still fairly sweet. I don't want to try to restart it for a third time.

Is it safe to run a sweet wash through an air still or should I just toss it? I don't want the sugar to burn and muck up my pot.


r/firewater • • 2d ago

Rum wash starting gravity/density concern — 5kg molasses + 3kg brown sugar (too high for yeast that does 15% max??)

6 Upvotes

Hey everyone, looking for a bit of a sanity check on a rum wash I just put together.
Here is my recipe and setup:
**Fermentables:** 5 kg molasses + 3 kg brown sugar (plus water to volume, standard wash size).
**Yeast:** A dedicated rum yeast rated for up to 15% ABV.
**Nutrients:** Fermaid O.
My math/calculations suggest that this amount of sugar shouldn't push the wash past the yeast's 15% ABV tolerance. I figured it would ferment out completely clean and chew through everything.
However, someone reviewing my numbers online is arguing that the initial density/sugar concentration is way too high and that the yeast will stall or die off due to osmotic pressure/stress before reaching that 15%. They suggested keeping the density below 18–20°P.
Is this starting sugar load actually high enough to kill off or severely stress a rum yeast, or should a 15% tolerant strain handle a wash like this without issues as long as nutrients and temps are managed? Appreciate any insights!


r/firewater • • 5d ago

Where to buy 15 Gallon charred Barrells

11 Upvotes

I was looking for advice on the best place to buy 15 gallon Charred oak barrels. This one seemed ok
https://thebarrelmill.com/product/15-gallon-oak-barrel/
I was also thinking through how to handle a large amount of mash and contemplating 3-4 55 gallon plastic drums https://www.mcmaster.com/products/plastic-barrels/drums-1~/?s=plastic-barrels. Both seemed reasonable.
I'm just looking for devils advocates, thoughts, known problems.


r/firewater • • 5d ago

Brewer looking to get into distillation

5 Upvotes

Howdy Folks! I just wanted to gauge people here on what they think of AirStills. I barely have enough room for all my brewing equipment and don’t think a regular still has a place yet. Mostly looking to distill Gin or Vodka. The size doesn’t bother me much only being 1gal on these since I really won’t be drinking much. Fairly clueless on what I’m getting into haha


r/firewater • • 5d ago

New still / Rakija Questions

Thumbnail
gallery
28 Upvotes

May be a bit of an odd one - just looking for general advice! My friends group plans on doing 3 batches a year of different seasonal fruit. We have our inaugural run going - due to seasonality etc we’re starting with apple. As true to the Balkans as possible our mash is exclusively fruit / we do take a more modern approach with yeasts and yeast nutrients but that’s it. Just looking for general feedback / advice! Included pictures of our mash as well as our still! Thanks.


r/firewater • • 5d ago

Pot still 2 mods

Thumbnail
gallery
10 Upvotes

How would you run this still for stripping run, option hightower or low collect? Imagine the condenser is plugged to water.


r/firewater • • 5d ago

Sooooooo. Might have bought a new still

Post image
37 Upvotes

r/firewater • • 6d ago

The supreme court has agreed to consider the federal ban on home distilling

94 Upvotes

They expect to make a ruling June or July of 2027. If you could "crystal ball it" would you guess theyd rescind the ban on home distilling or keep the federal ban in place?


r/firewater • • 6d ago

Distilled my first single malt about a week ago, it's already turning out better than I expected

Post image
48 Upvotes

This is my first whiskey in addition to being my first single malt. It started out as 12 lbs. of Munich type 1 malt and 5 gallons of water and only took 36 hours to ferment dry. It's been aging 6 days on some toasted oak chips, but it's getting pretty close to sufficiently oaky already, so I'm probably gonna pull out half the chips and let it go a bit longer.

I've got a batch of rye fermenting, that'll probably be in the still on Saturday.


r/firewater • • 6d ago

Homemade distilled kvass

Thumbnail
gallery
14 Upvotes

So me and some friend made some Kvass that I later distilled. I posted the Kvass recipe in another community already. This was my first time fermenting/distilling anything.

The Kvass was 8% ABV/16° proof.

This made distilled alcohol that was 70% ABV/140° proof. Even after just a single run. I'm not sure how that's possible after a single run. I did dillute it with distilled water down to 40%/80°.

The taste was sweet, surprisingly so, it lost all the aromas associated with fermentation and quite a lot of the fresh rye aroma, instead it tasted of raisins and toasted rye bread and maybe ever so slightly like fig. The alcohol even at 70%/140° was noticeable but surprisingly mellow, you wouldn't know it was distilled to this high strength by the taste.

I used a water distiller with a temperature controller attached to it so it would distill around 78.3° Celsius/172.94 Fahrenheit.

At first I only kept around 5% total volume but the last few batches increased the total volume to around 10% of what I kept from the fermented to the distilled. Not only did I get more out of it but it also increased the alcohol content with 10%/20°. I did 5 total batches and the last two we're the anomalties. The first 3 batches took around a full day and the last 2 took around 8-12 hours just about to fully distill.

Though similar alcohol exist we found it distinct enough to name it ourselves, we named this Zonneshine. (Sun in Dutch+Shine from Moonshine).

I'm really happy with the results, it tasted like a proper quality drink with very interesting aromas, like you could find this in a store no problem. Only downside is that it took a lot of work and time.

Edit: Apparently temperature control doesn't work this way as some have pointed out. Happy to have learned something new :).


r/firewater • • 6d ago

Distillation results follow up post

9 Upvotes

I posted a few days ago looking for some guidance as to why the pH of a mash I made did not drop during fermentation. Here is a link to that post with the relevant details: https://www.reddit.com/r/firewater/comments/1xhv16x/why_has_ph_in_my_current_washmash_not_dropping/

I ran that wash last weekend and was pleasantly surprised with the results so I thought I'd share them here. Included here are two images one of which shows the recipe used to make the wash while the other summarizes the results of the distillation. Note that while the recipe was based on a target H2O volume of 6.5 gallons when I measured the volume of wash as I loaded it into the boiler there was actually ~ 7 gallons. The extra H2O would be from where I soaked the oats prior to making the wash.

As for the results as you can see the deflagmator (sp?) was definitely doing it's job as the proof (no not temp corrected values) started at 190 and pretty much held that all the way to the very end of the run with the exception being a little while early on where I was adjusting the needle valve on the H2O supply line to the deflag that caused it to temporarily drop a little bit.

So I left the collection jars open with coffee filters over them for 2 days. The distillate from jars 2-12 were the probably cleanest/most neutral result I've ever achieved....no funkiness at all present. Based on this perception I eliminated the first and last three jars when I made my cuts and combined jars 2-12 which resulted in 2,420 ml (surprisingly high evaporation loss imo - 2750 to 2420 ml)of distillate which I passed through a Pur H2O filter ending up with 180 proof which when blended down to 80 proof should produce roughly 1.4 gallons of liquor. I currently have the distillate resting in separate glass bottles each of which is roughly 1/2 full to oxidize it before proofing it down.

Anyway, I just thought the results were interesting considering the curious manner (imo) in which the fermentation behaved (slow & steady with no pH drop).


r/firewater • • 7d ago

Old Food Industry Samples

Post image
9 Upvotes

My wife works in the food industry and so she had several samples of ingredients that I'm pretty sure will break down with AYYL. So I tossed it in a bucket with water and some funky dunder I have going for my rum.

Maltodextrin, dextrose, chickpea grits, chickpea powder, honey powder, buckwheat flour, and cornstarch. Its about 12lbs of ingredients tossed into a standard five gallon, so hopefully I can get a little bit out of it.

I don't normally do runs like this of course, but I figured since it was so strange I had to share it.

I'll post here in a few weeks once its done fermenting and I've run it.


r/firewater • • 7d ago

What should I be distilling and what I should expect from a YUEWO Alcohol Still

3 Upvotes

So I decided to enter distilling after reading and been actively interested in trying it for years. I got this mostly for the size factor and the column addition rather then get a plain pot still(and definitely not confident in making my own).

But I am a bit perplexed to what I should trying running and what should I be expecting out of a this not quiet a pot still but definitely not a reflux still. Of course my first trial run will be a sugar wash but what would I realistically be getting out of a short column and no dephlegmator.

And for future asking would adding another say column extension(3 or 4 plates) and a dephlegmator make this more of a reflux still if i get more into it?


r/firewater • • 7d ago

Metal-tasting water

2 Upvotes

I've tried distilling water just for fun using a 70-litre stainless steel boiler, a 5-foot column with 2 reflux plates, and stainless steel packing made for distilling. After distillation, the water smells and tastes metallic.

The packing was used for the first time. Before using it, I washed it with Dawn dish soap and rinsed it thoroughly. I'm starting to think this may be the issue, but could someone help enlighten me?

Thank you


r/firewater • • 8d ago

Air Still Pro First Time Use …Bad Taste

4 Upvotes

Thank you for any advice in advance
I just got my air still pro. I did the cleaning procedure with the 50/50 water and white vinegar in pot still mode as well as pulling all the stainless and copper out and cleaning them separately
I am waiting on my first sugar wash to finish so I ran 2 liters of Seattle tap water.
I even made cuts every 30 mins. And something has to be wrong with my new machine. The water from the first cut to the last all taste like and smell like funky rubber. Totally undrinkable. I know distilled water should have no real smell or taste.

So I waited 3 hours and did the test again and it’s just as bad.

Am I missing something? Is this normal for the first few runs. Any help will do.


r/firewater • • 8d ago

How much you get

2 Upvotes

I'd like to hear from the community: how much 55% abv liquor can ya'll get from a 20 gallon run?


r/firewater • • 8d ago

Pineapple mash

31 Upvotes

Soo, I got a couple amount of clients maybe 2 months ago and now I restarted distilling. Already made 2 really good batches of Ted's fast fermenting vodka (one I used tomatoes for nutrients and the other I used boiled baker's yeast, worked like a charm and the second one didn't have an subtle strange aftertaste). I'm doing very small scale (1L at a time) but now I fermented a little bit more and hope to get about 2L of about 30% liquor with a very present pineapple flavor)

Recipe:

2,4 kg of grilled pineapples

~3kg of in natura pineapples

70% of the peels of all pineapples used

1,900kg of sugar

9,5L water (added a little bit more to compensate the water loss from the grilled pineapples)

About 10g of dead yeast (I bought nutritional beer yeast, really cheap and seems like it's good) just for nutrients

It's fermenting with the wild yeast on the peels, I also added a little bit of my cultivated yeast from ginger and mango peels.

Honestly the most important part of that recipe for me is the peels, most of the flavor from whatever fruit comes from the peel, not the pulp. I blended both pineapples (grilled and in natura) and added to the mash that was already fermenting (I have kinda of a short deadline, so I started fermenting on pure sugar and dead yeast until I could go out to buy the pineapples)

Since I've never made this recipe I'm kinda of lost in the distillation question (btw the wash is EXTREMELY good, I'm almost getting drunk because I drink a little bit from it every time because it's so delicious) because I don't know if do a 1x, 1,5x or 2x distillation (I have a pot still, small one), I don't want to lose all of that extremely good pineapple flavor but I feel like 2x is just the way to go... I would appreciate very much every help on this question, maybe someone already made some pineapple brandy there.

Vid one is from the pineapple mash and pic is from my last batch of Ted's fast fermenting Vodka (neutro = neutral lote 2 = batch 2). Cheers!


r/firewater • • 8d ago

Wheat Vodka might turn to whisky

8 Upvotes

Hey all, wanted to get some opinions on this.
So i made a 15 gallon flaked wheat mash last night, (90% flaked wheat and 10% barley). Everything went well with enzymes and conversion etc, but it was at 116 when i added the glucoamylase at night and figured id let it finish up and come back tomorrow to pitch yeast. This morning, it was fermenting away like crazy from natural yeast on the grain. I knew it could happen a bit, but didnt expect a full blow grain cap bubbling away. So, i proceeded to just add some nutrients and a wheat beer yeast (was planning on using a clean yeast) but i figured, know thats it kinda soured a bit and probably on its way to some funkier flavors and aromas, that id use this mash as a whisky, but could a good vodka come out of a mash with a lot of fermentation character? I have a 4 bubble plate reflux still so i can get to 190 proof but, theres still plenty of congeners carried over usually. Would i be better off using this as a whisky and next time for my vodka, cool the wort down to pitching temp immediately and pitch a clean yeast. It does smell great btw nothing bad really, just do i go vodka or whisky.


r/firewater • • 9d ago

Sealing leaks

4 Upvotes

I found a small leak near the top of my column, where some vapor was escaping during the early part of my run. I can get the piece soldered again, but I remember reading about people using a flour paste in a pinch. I really have to get some vodka run in the next few days. Can anyone advise on using flour paste if that is still accepted practice?


r/firewater • • 9d ago

Modular start up.

4 Upvotes

I've been looking to get into this for a while, and now that I've got a bit more time on my hands, I'm keen to get started.

Been homebrew8ng for yonks, and want to start into the making spirits.

The VEVOR kits seem cheap, but from what I've read, the general consensus is that they're not particularly great. The next step up, though, seems to be a pretty significant jump in price.

Can anyone point me in the direction of a decent beginner setup that's modular? Ideally, something I can start off with and gradually upgrade individual components as and when, rather than having to replace the whole setup when I want to expand or improve it.

Any recommendations or advice would be appreciated!

UK based. Budget, under 500£.

Cheers