r/fermentation • • 2d ago

Kraut/Kimchi Weights keep floating up…?

10 days in, I keep pushing the weights down under the brine, theres enough in there to cover them by a cm or so and there’s a large cabbage leaf in there too, but literally 2 minutes later they’re back at the top…why do they keep floating!? help 😭

2 Upvotes

15 comments sorted by

10

u/JohnnyWarlord 2d ago

I think you could get a couple big pieces of cabbage on top then the weights then enough brine to completely submerge everything

3

u/My-Lizard-Eyes 2d ago

Yeah this is normal, signs of a healthy active ferment!

Last time I made kraut I had to push it down like twice a day. I tested a little every time until I reached my preferred sour level. Just use clean spoons. Came out great!

1

u/pr312531 2d ago

Oh that gives me hope 😅 it’s been 10 days, how long until I can start trying it to see if it’s done? I’m kinda getting impatient since it’s requiring so much attention haha

2

u/My-Lizard-Eyes 2d ago

I would start testing some nibbles after 10 days..! I like the flavor of sauerkraut after 10-14 days, it will keep slowly fermenting in the fridge too

1

u/jakeBGrocks 2d ago

The weights should sit on top of the cabbage, keeping it barely submerged. There shouldn't be any cabbage on top of the weights.

2

u/pr312531 2d ago

I’m trying to get them to, but they just keep letting bits past when I push the weights back down

2

u/Timmy_2_Raaangz 2d ago

You need something under the weights that covers the surface so the force of the weights can distribute somewhat more evenly. Sometimes I use the big outter leaves, sometimes I use plastic wrap. You also would have a better result but putting the weights at the exterior edges of your crock.

1

u/Ok-Jelly604 2d ago

I would use a smaller jar and just no weights at all.  

1

u/Remote-Blacksmith516 2d ago

Try a bag of water, that sits on top no weight needed. The water will take the shape of the jar and create a perfect seal that will keep the brine in place.

2

u/Far-Alternative801 2d ago

Great idea! I have no weights that are designed especially for this purpose so I'm using plastic caps but they're too small and they get easily pushed up by the veggies

1

u/Professional_Soft404 2d ago

You need a follower. You can use a big piece of cabbage under the weight to keep everything contained

1

u/TheCoolGuyClub 1d ago

If you have an airlock and only a small headspace, you don't even need to worry about everything being submerged, as long as you don't keep opening the ferment

1

u/TEAmplayar Ferment Fanatic 2d ago

you cabbage volume it's too low. Depending on the jar/ crock you want the cabbage about of a third way up the jar, with the brine covering the cabbage and the weights but also allowing aprox. 1 inch space down from the top. Also the weights are meant to be under the rim of the jar, in a way that it allows the cabbage to expand but also the rim of the jar stops the weights from going too hight.

If this is a rather diy setup it could be hard for things to fit properly, so just buy a means tested jar with instructions and designed for the type of pickles you are making.

1

u/TEAmplayar Ferment Fanatic 2d ago

forgot to add, also use a strategically placed cabbage leaf between the cabbage and the weights so it keeps thd floaters down

2

u/Solstice_314 2d ago

Strategic cabbage leaf- I like that, sir