r/fbody • • 13h ago

Got It Moving

Thumbnail gallery
74 Upvotes

r/fbody • • 17h ago

Wiring on Fuel Rail

Thumbnail
gallery
4 Upvotes

Good evening. 02 LS1 Camaro with a fresh swap

Anybody have an idea where this goes ? Have the motor in cranking but not getting fuel and suspect this could be the case


r/fbody • • 1d ago

4 post lift in a garage

9 Upvotes

Anyone here have a 4 post lift in their garage? I have my 4th gen and a c5 with a 9’3” garage based on the measurements I’m finding online of height of about 52” on the trans am and about 48” on the vette with a 5” thick runner on the lift I should have about 3” of difference left. Just curious if anyone has a similar car and lift setup and how tall your garage is.


r/fbody • • 2d ago

HP Tuning Help

Post image
11 Upvotes

This is my 1996 3.8l 4l60e rs camaro equipt with the Y87 option and i did a mild build with a GT1 camshaft kit from ZZPerformance (ill leave a list of all the mods below) and with the current 96 pcm i get a P0300 because its too sensitive on the missfire tables which impacts the 4l60e heavily

Now i did get a 97 pcm and i sent it out to ZZP for a GT1 cam file to be programed on to it since i've never tuned a car with a software like that befor, leave it to the professionals right? Boy was i wrong now the pinnouts are all correct on the 97 pcm i have but the tune is either improper ie from a wbody or a pontiac fwd car since they had these 3.8l in them. So my question to anyone who tunes things at all, how difficult would it be to flash it back to a stock tune whail still being unlocked for the 96?

mods list:

GT1 ZZPerformance 3800 series 2 N/A Camshaft

LS7 Lifters with custom length pushrod

Double Rollmaster timing chain set

30 Overbore with +.75mm pistons

ZZP High Voltage coil pack

10.5mm sparkplug wires

Mid length headers

3" single resonator straitpipe

EGR delete with physical blockoff plates

CAT and Post-CAT 02 delete

Y87 package is 3.42 G80 Cone/Clutch Positrac rearend and 4 wheel disc breaks (also "dual exhaust" its just a dual exit on the muffler) z28 style 16" rims and the ground effects body kit


r/fbody • • 3d ago

Them some big boys. Half way there to Hot Wheels status.

Thumbnail
gallery
82 Upvotes

Just got my tires in tonight. The rears were cooked, so I looked at getting an aggressive setup. The new shoes, which are AR Torq Thrust IIs, will be coming in soon; couldn't be more excited to get rid of these wheels lol


r/fbody • • 3d ago

Help needed about 02 camaro

Thumbnail reddit.com
1 Upvotes

r/fbody • • 4d ago

Belt squeal

Post image
8 Upvotes

r/fbody • • 5d ago

93 z28 t56 350 carbed. need new coilovers.

Post image
31 Upvotes

thanks for the help with my throttle cable. new one arrives this week.

i need new coilovers for this pig but i cant find what im after. i need a fully adjustable set that has a lot of range for ride height. id love to be able to tuck the wheels a tad more. it’s on viking super low coils but theres no ride height adjustment and they are blown out. i’m looking for a bc racing esc set, like on a 350z or civic. i’m not looking to slam the thing but i need something that gives me more room to go lower. i love the factory wheel set up and it will more than likely stay that way. am i missing a product from somewhere? all i can find is 2 in drops. ole gal is just bolt ons not a ton of power im just looking for something that i can adjust from this ride height whether lower or higher. would love to drop it tad more.

again ik its haggard. but love how it sits. not sure ittl sit as well with yall but it hasn’t been a museum piece since it got totaled out. slowly making her more alive only 120 on trans n chassis.


r/fbody • • 7d ago

throttle cable for a t56 350 sbc 93 z28

Thumbnail
gallery
4 Upvotes

yes ik this things haggard and dumb. i need a new throttle cable set up for this pig. its a 350 sbc swapped 93 z28, its a from a show truck thats why it looks like that. when i swapped it the throttle was always super stiff and felt awful one day it snapped bc of the routing. is there a off the shelf solution to route the cable better? i need a new mount and cable from pedal to throttle body.


r/fbody • • 7d ago

F body fan issues

Thumbnail reddit.com
3 Upvotes

r/fbody • • 8d ago

Sunset spot😎

Post image
50 Upvotes

r/fbody • • 8d ago

Shaker scoop

Thumbnail
gallery
32 Upvotes

r/fbody • • 9d ago

Dressing up for Halloween

Post image
136 Upvotes

r/fbody • • 9d ago

New plates came in the mail lol

Thumbnail
gallery
40 Upvotes

r/fbody • • 10d ago

My 2001 "V6" VIN K Camaro

Thumbnail
gallery
154 Upvotes

Bought a 2001 Camaro V6 with an almost dead engine, rusty bits, and locked brakes for $800 a few years back. The goal was putting an LS in there and making it go fast on a budget. Took a few years of on-and-off-again work, but this was its first year driving around.

LQ4 out of a Silverado 2500. 4L80E built by a local shop. Cam is a bit too big with .600 lift, chops great, and runs like a bat out of hell. Lift is too big to keep vacuum, so it has a vacuum pump so I can brake.

Added line-lock to smoke the tires when the kids ask. Wiring is questionable at best. Gauge cluster doesn't work so I added a tablet with a Bluetooth OBD2 connector for info. Cheap GPS speedo HUD, added tach, fuel level, and oil pressure gauges.

She's not much of a looker. But I didn't build it to impress others. When I was 16 this car was brand new and what I dreamed of driving. Now I have one. So much fun to drive and that's all that matters to me.

Oh, and it's Throttle-by-Wire. I think that's really cool.


r/fbody • • 10d ago

81 Z/28 Value

Post image
54 Upvotes

Just a question on my classics worth because something else caught my eye! 1981 Z/28 With 0 rust, 350 bored to 355, th350, clean interior, cam shaft snapped in half so currently doesn’t run. Doesn’t really add value but it has new torque converter with 2800 stall, replaced entire fuel system, edelbrock 650 carb, upgraded radiator with electric fan. Any inputs on estimated value? -From Michigan


r/fbody • • 10d ago

2 Year Progress on my 74 Bird

Thumbnail
gallery
182 Upvotes

Just wanted to share my 2 year progress on my 1974 Firebird Espirit. When I got this car I had no garage, no shop, no nothing. I built a gravel pad and then bought a 12x20 tarp car port. This is where I did all the metal work I could, replaced the entire suspension, engine, trans, interior, wiring etc.

I had multiple setbacks that really beat me down. The first one being my car port literally flew away during a bad wind storm, destroying my work bench and scattering my tools. I had to rebuild my car port and reorganize everything before I could get started again. Then once I got it running, I found out the title was jumped (long story). For awhile I didn’t think I was going to be able to get a title for it and was ready to cut my losses and I bought a donor to swap my parts to. Then I was able to track down the original owner, yes original owner who bought it new, and he was nice enough to get a replacement title, then sign it over.

Then finally I was able to get plates and take it on its first real drive. Truly a wild feeling to put a car on the road that hasn’t driven under its own power for decades.

She’s far from perfect and definitely not done, but at the end of the day, it’s an Espirit that most people would’ve let rot away in a field. Now she’s got a 455 and a second chance at life. So if you’re on the fence about starting a project, just do it. It’ll be a money pit and take up way too much of your time, but it’s also super rewarding.


r/fbody • • 9d ago

98 Trans Am Alarm Issue

1 Upvotes

All of a sudden when locking my car (using the key fob), the horn now honks once, when use to honk twice.

I checked the doors, trunk lid, hood and top and they are all fully closed.

What could cause this issue?


r/fbody • • 10d ago

2000 Camaro Swap Project

Post image
56 Upvotes

My new super budget family build. (Windowed block) V6 Auto 3.42 Limited Slip. Going to be throwing a 2000 5.3L in it with a cam that my kids will end up helping me build. Already collected a Z28 K-member, ls6 intake, and swap pan. Currently in the planning stage trying to determine how I’m going to go about getting the accessory drive setup. Leaning towards going with the truck spacing and spaced LS3 style water pump with high-mount alt bracket (as I already have everything from the 5.3) and hoping to use the p01 with the harness from the truck...

I’m most curious about the A/C though. I’ve not seen much about A/C setups on this type of swap utilizing the truck A/C compressor vs retaining the stock V6 compressor... or if either is really an option. I’m looking for the simplest means of keeping cold air blowing. I’d appreciate suggestions from people who have done similar. TIA.


r/fbody • • 10d ago

Camaro Badge

Thumbnail gallery
19 Upvotes

r/fbody • • 10d ago

LS1 H/C only NBO Dyno. Flame suit is on😁

8 Upvotes

I needed to have a spark plug hole fixed on my stock 241 heads and the motor was going to be pulled to fix it. It had/has a 3,200 rpm stall converter and all else was stock. It didn’t have any bolt-ons, and it still doesn’t. It has 34k miles on the OEM bottom end.

So instead paying someone to pull the motor for just a helicoil I opted to replace the heads & cam while the motor was out. I went with Edelbrock E street heads, which are 243 Clones for the heads, and I used a 218/227 .660“ lift Summit cam.

I knew the power numbers would be lack-luster but I didn’t expect them to be “stock like” numbers. It wasn’t dynoned before the new heads and cam so I don‘t know what it was making before. But I was assuming that it was making around what it’s making now. It made 299 hp @ 5,800 and 291 ft lbs at 4,850. I don‘t know if the converter was locked or not and it was on a Dynocom Dyno. I was guessing it was going to make 320-340 at 5,800.

I wasn’t there when they tuned it and I hadn’t gotten the car back yet so I can’t comment on how it runs yet. I hope it doesn‘t suck to drive now with that cam in there.

Weird numbers kind of, but maybe not. I can’t see a set of long tubes adding another 50-70 hp at the wheels though. But maybe…


r/fbody • • 10d ago

Fucked up firebird as my first car

Thumbnail reddit.com
2 Upvotes

Same as the quoted post, is there any help or advice you guys got?


r/fbody • • 11d ago

79 Firebird help

Post image
53 Upvotes

Got a 79 formula this summer and have just fixing up some miscellaneous things on it, just curious on what you guys or gals would do to start, it needs some rust repair, not super terrible just behind the rear fenders and I spot or two on the floor(got it from Montana), needs exhaust, bunch of bushing and whatnot are shot so most all of the suspension needs replaced and it needs some wiring for the radio and other things in the cab but I’m not too worried about that right now, and it needs shocks/struts, along with some miscellaneous things, I was thinking of pulling the 350ci and building either a 377 or a 383 and I also want to manual swap it with a tremec, just curious if anyone would be able to give some we’ll need advice, thank you


r/fbody • • 12d ago

DTC P0452

1 Upvotes

I was out in my 98 Z28 and it suddenly began to run rough and give off a faint fuel smell. Checked the codes and got the P0452 Fuel Tank Pressure (FTP) Sensor Circuit Low Voltage code. It looks like it can be as simple as a faulty gas cap to a bad FTP sensor or Evap issue. What is the most likely cause or which issues would cause rough idle and fuel smell?