r/espresso • • 24m ago

Equipment Discussion Wendougee Milo Play owners: how is it with light roasts? And how was buying from Espresso Outlet?

1 Upvotes

I'm looking at the Wendougee Lita LA plus Milo Play bundle from Espresso Outlet. I mostly drink light roasts, often as soup or turbo shots. Trying to decide between the Milo and a timemore 064s II. I'm also considering a Lita (vs a fellow espresso series 1). Currently using a BDB and Niche Zero, which doesn't seem to produce great results with light roasts on my BDB.

Two questions for anyone who's been there:

  1. If you own a Milo Play, how is it in the cup with light roasts? Clarity, sweetness, and how it compares with what you had before.

  2. If you've bought from Espresso Outlet, how did it go? I'm particularly interested in support and especially any warranty claims on Wendougee gear.

Appreciate any first-hand experience.


r/espresso • • 25m ago

Dialing In Help Dialing in grind and dose [Delonghi Specialista maestro]

2 Upvotes

I am new to an espresso machine, I was given a Delonghi specialista maestro for free...so despite the reviews I've read saying it isn't the greatest machine....it was free so im taking it!

I initially had a bag of Costco beans I didn't mind blowing through to experiment. I finally seemed to dial these in and then went and bought quality beans from a local roaster. The settings I had for the Costco beans didn't work at all for these beans...and i just wasted 75% of this expensive bag trying to find the right grind/dose.

Typically I would grind finer for espresso but the shot won't pull at all any finer than a 5 on the grind setting. It looks pretty good at a 6 and a dose of 20 but tastes very bitter. Any suggestions?

And will I have to go through this wasting process every time I buy a new bag of beans?


r/espresso • • 28m ago

Maintenance & Troubleshooting Is it normal for the ends of this plastic tube in the drip tray to have rough edges or be uneven or does it affect anything? It’s not clear on the picture. [Breville Barista Express]

Post image
0 Upvotes

r/espresso • • 46m ago

Equipment Discussion Breville barista express grinder not grinding fine enough

0 Upvotes

I have come across a couple posts now about the Breville barista express grinder, not grinding fine enough, but I wanted to come on here for myself. I just picked up this Breville barista express from Best Buy last week. I’ve been playing around with the internal burr and the outside settings and I’m not able to get the correct fineness for my espresso shot. Currently have it at one on the outside three in the inside. But it’s still way too course and not leaving the infusion zone. I thought Breville would have fixed this issue by now, but I guess not does anyone know for certain the fix?


r/espresso • • 1h ago

Coffee Beans Regularly Available Espresso Blends with Natural Funk

1 Upvotes

During travels in Mexico, China, Japan and Taiwan, I've noticed cafes incorporate natural processing flavors in their standard blends, more so than I've seen in NA and EU. Not talking about co-ferments or 100hr ferment or anything crazy, just natural fermentation flavors blended into a daily bean. I think these blends meld beautifully in milk drinks and would love to find a North American (ideally US-based) roaster that offers a year-round espresso blend link this.

The drinks I'm trying to replicate came from a cafe in Hong Kong called n.o.t. Specialty Coffee, and a cafe in Tokyo called Rec Coffee.

Does this flavor profile make sense and can anyone offer a recommendation? Thank you!


r/espresso • • 1h ago

Maintenance & Troubleshooting Looking for pressure gauge adapter [ECM Classika, Brewmeo]

1 Upvotes

I have been quite impressed by the Brewmeo Bluetooth pressure sensor! It took the guess work out of my espresso workflow. I can now literally see what my shot is doing.

Although I have an old iPad mini dedicated to Brewmeo, however it's nice to be able to make an espresso without all the tech, especially in the morning when my eyes are still half open.

Therefore, I am wondering if anyone knows of a Y or T adapter that would allow me to simultaneously connect the Brewmeo Bluetooth sensor and the analog pressure gauge?

Alternatively, it would be great if you could please share the size and type of thread used on the Classika pressure connector?

Thanks!


r/espresso • • 1h ago

Equipment Discussion Generic aliexpress/temu hand grinder

Post image
0 Upvotes

Does anyone use these cheap grinders for espresso and pour over maybe? They are usually around 30 euros and if they can grind fine enough for espresso, that's good enough for me for start.


r/espresso • • 1h ago

Coffee Beans Rainbow - Manhattan - strawberry yoghourt?

Post image
6 Upvotes

Ok - I came home tired, I wanted a pick me up feel good cup of milky coffee.

Enters Manhattan Rainbow bag. Roasted 22/10.

18g to 34g in 35’ - longer than I usually do.

A bit of foamy milky top.

Really nice cup, great mouthfeel, like a strawberry yoghourt.

Infused you say?


r/espresso • • 2h ago

Buying Advice Needed Looking to buy my first proper espresso setup – €1,200–1,700 budget (machine + grinder) [$1,700]

1 Upvotes

Hey everyone!

I'd like to get into the world of espresso. I really enjoy good coffee, and although I only drink two cups a day (one in the morning and one decaf in the evening), I really appreciate a good cup.

After saving up for a while, I've finally got the budget to invest in a decent setup.

So far, I've been using a super-automatic machine. The coffee is okay, but nothing particularly impressive. My biggest issue, though, is maintenance and hygiene. These machines accumulate so much coffee residue. Unless you clean them VERY frequently, you quickly end up with damp coffee grounds that can develop mold, old coffee residue inside the internal pathways, and all sorts of buildup.

My budget is around €1,200–1,500 for both the machine and grinder, although I could stretch it to €1,700 if the upgrade is genuinely worth the extra money.

Here are some of the machines I've been looking at:

  • Meraki Gen 2: I was quite interested in this one, but after doing quite a bit of research, I'm hesitant to make such a significant investment in a machine whose long-term reliability and after-sales support are still somewhat unknown.

  • Rocket Appartamento: I considered this one too, but nowadays I feel there might be better options for the money.

  • Lelit Mara X: Another machine I've been looking at.

I'm sure there are plenty of other options I'm missing, so I'd love to hear your recommendations.

What machine and grinder combinations would you consider in this price range? And is stretching the budget to €1,700 worth it?

Thanks in advance for your help!

Cheers!


r/espresso • • 2h ago

Equipment Discussion 80mm vs 98mm burr advice needed!

Post image
1 Upvotes

Im considering buying either a 80mm or 98mm grinder from Yehjen. Chinese grinder, i’ve seen it in person. Looks promising, willing to take the risk. Attached pic above.

Coming from 64mm SSP MP burrs. So far taste wise suits me but very narrow calibration on my DF64V3.

I usually drink ristretto with milk. My question is, for espresso light-medium roast which burrs is the best in your opinion?

Appreciate you guys sharing your experience.


r/espresso • • 2h ago

Buying Advice Needed Espresso Machine recommendations [£1200]

3 Upvotes

Hey everyone,

I’m looking a purchasing a replacement espresso machine - my current Breville Barista Max has given out after several years of use. I am currently looking at a Fellow Espresso Series 1 which seems to be available for around £1100. Two main questions:

  1. ⁠Does anyone have any experience with this machine, how does it perform?

  2. ⁠Does anyone have a different machine at a similar price point that they would recommend, and why that machine over the Fellow.

Thanks in advance!


r/espresso • • 2h ago

Dialing In Help Milk drinks w/ Turbo & Soup Shots [Flair 58+2; Option-O Casa]

2 Upvotes

Hi all, I’ve recently been trying some of the Lance Hendrick recipes he discusses here https://youtu.be/ECxXKKfW37w?is=cCrY2zbyY4FelUqq, specifically the SEY shot, which is 9-12s, at 90C, 18g in - 42g out. I am using a 49mm step down basket. I’ve been getting (I think) tasty shots following the recipe Lance spelled out w/ different SEY coffees.

However, I’ve been noticing that, while the espresso by itself good, whenever I add warm or cold milk, the coffee flavor itself dissipates almost entirely.

What am I doing wrong? My SEY light roasts are about 4-5 weeks off roast. Even noticed this with Boy & the Bear. I tend to have better luck with Colombian coffees, East African coffees I have really had no luck. I’m beginning to think my espresso doesn’t actually taste good and I’m coping lol. What should I be tasting in a turbo shot? Whenever I drink cortados at these cafes, I can taste the uniqueness of the coffee just fine. What is it I am doing wrong?


r/espresso • • 2h ago

Humour Max Fosh's Coffee video ( brief James Hoffmann cameo)

Thumbnail
youtube.com
0 Upvotes

A lot of these people were likely just being polite (maybe except the person picking out tasting notes) and it's possible some genuinely liked it though.

On a separate note, if James Hoffmann himself had been at the stand presenting that coffee, I reckon people would have genuinely loved it.


r/espresso • • 2h ago

Buying Advice Needed Set-up for Pure Espresso[$3000]

1 Upvotes

I drink two double shots of espresso every morning. My wife only drinks americanos. We don’t make milk drinks and never used a steam wand. Any recommendations for grinder+machine if we are looking for something simple? Something that would warm up quickly would be great. Budget up to $3k but not a hard stop amount as I want something long-term. Appreciate everyone’s insight!


r/espresso • • 3h ago

Maintenance & Troubleshooting I really want to descale this Bezzera. Is that a terrible idea? Plus a bonus question. [Bezzera BZ07]

Thumbnail
gallery
1 Upvotes

After a lot of hemming and hawing over going down the single boiler modding rabbit hole, I decided to take a chance on this older BZ07 to see what the HX world had to offer. It predates the PID, volumetric shot version. There wasn't any real information on its maintenance history, but it was clean as a whistle on the outside, came up to pressure without blowing up or bursting into flames and pumped a passable test shot. Imagine my horror when I opened it up to discover a ring of scale around the boiler/heating element seam and a rime of scale on some of the other components. That scale is concentrated on what I think is a (two-way?) solenoid valve on the right side of the machine. The other side of boiler is mostly scale free.

I fixed a slow drip from the pressostat that may have been contributing to the problem. So far, I don't see any obvious leaks from the boiler. The scale buildup, a bit thicker in spots but visible around most of the circumference, suggests something is seeping out. I am imaging a bit of water escaping from around the heating element, vapourizing and building up scale over time. But why is it concentrated around that other fitting?

First burning question: if I try and descale the boiler (maybe using this as a guide: https://www.youtube.com/watch?v=yEGfyJkWSqU ) am I going to end up with more problems than I currently have? I've operated on a few Gaggias and Rancilios. This is obviously a much greater level of complexity and I've seen many people claim that descaling a machine like this is opening up a world of hurt. Should I worry much about that surface scale elsewhere in the machine? It is unslightly. Nothing is shorting out just yet. Wipe it off with some vinegar and leave it be?

Second burning question: I am guessing that boiler gasket needs replacing sooner rather than later. What is the simplest way to go about doing that?

Bonus question: The brass fitting underneath the pressostat has two outlets. One routes back the the water tank. It was leaking, but I have fixed that. The other is just...open. I can't figure out from the parts diagrams what it should attach to, if anything. It doesn't spit out any water. That hole does accumulate a very small amount of water that just sits there, delicately, held in by surface tension. What the heck is it for?

Thanks for any information you can provide. This is my first HX machine and I want to do right by it. And drink some good espresso.


r/espresso • • 3h ago

Buying Advice Needed Advice on what grinder(s) to pair with niche duo [$1000]

1 Upvotes

I currently have a nice duo I use for espresso and fellow ode I use for pour over. I haven't had much of a chance to try the filter burrs on the duo as I don't have another grinder that can do espresso, and I drink both daily. I'm looking to replace the ode with something that can do both espresso and filter coffee with the idea being I could occasionally swap which grinder I use for filter and espresso. So I'm in the market for a grinder or grinders that would compliment the niche duo and would be capable of espresso and filter. Any suggestions on what grinder(s) to consider? I mostly do milk based drinks and v60, but lately I've been trying plain espresso as well. I'm hoping to stay under $1,000, but would consider a bit more if needed. Thanks for the help.


r/espresso • • 3h ago

Maintenance & Troubleshooting Need help with suspected leak from [Rancilio Silvia V6]

Thumbnail
gallery
0 Upvotes

I got this machine 4 years back in 2022, and recently i found it tripping my circuit breaker intermittently, especially during backflushing, and i also note hissing sounds occasionally when it is heating up to steaming temperature. The problem is persistent yet i cannot find a reliable way to reproduce the hissing sound and the circuit breaker tripping.

I opened up the machine and found this part covered in this powder which i assume is scale. Does this indicate a leak and can i replace the part myself?

Many thanks for any inputs!


r/espresso • • 3h ago

Dialing In Help espresso tastes sour [Izzo Alex PID]

3 Upvotes

18.5g in, 32g out in 40s. Judging from the slow flow rate at the start, I would expect it to taste burnt. Instead, there wasnt even a bit bitterness, but very sharp sourness. My guess is that it might be channeling a bit, or I might want to stop slightly earlier?


r/espresso • • 4h ago

General Coffee Chat Coffee puck solid?

11 Upvotes

My coffee picks always end up like this and I just wanted to know whether it's good or bad for this to happen:

18g in, 30-45 seconds out depending on roast.


r/espresso • • 4h ago

Buying Advice Needed Looking for a portable espresso machine: Outin Nano 2 / Mino / Cera+ or Ikape [€250]

1 Upvotes

Just a quick note: I personally have absolutely no knowledge about coffee or espresso, which is why I’m asking for help here. I’m looking for a portable espresso machine as a Christmas surprise for my girlfriend. She already owns an ECM espresso machine for home use, a manual grinder from Comandante, and a manual espresso maker—I believe it’s a Flair Classic—but since the latter is quite heavy, she doesn’t take it with her very often, especially when traveling.

She would likely use this portable machine while traveling, at the office, when out and about, and perhaps occasionally for camping or cycling trips (though that would be quite rare).

I’m looking for a portable option that produces coffee with a flavor profile relatively close to what she gets from her existing equipment (or, to put it another way: how does the taste compare to the Flair Classic?). Ideally, it should cost under €250 and be available for purchase within Europe/Germany.

I’ve already looked at a few options online:

- Outin Nano 2

- Outin Mino

- Cera+ PCM03S (There are three different versions on their website, but I don’t quite understand the differences; one advantage is that it’s app-controlled.)

- Ikape (There are various versions here as well, and I’m not sure how they differ from the Cera+ models—it seems they are partners with Cera+. These are also app-controlled.)


r/espresso • • 5h ago

Coffee Beans "high end" bean recommendations

1 Upvotes

Decided to skip the advent calendars this year and instead do a splurge purchase of a few high-end bags of pour over & espresso. Am probably going to do a small blend box from Onyx to scratch the pourover itch, and pick up a Geisha just to see what that's all about.

What beans do you recommend for Espresso, ignoring price? Anything light-medium roast is fair game, single origins or blends.

Edit; I’m in the US


r/espresso • • 5h ago

Coffee Beans Favorite morning grind

0 Upvotes

What are your favorite go-to espresso beans for your first espresso or espresso milk drink of the day?

Mine are Onyx Monarch

I’d love to see what you all like, and I’ll like to try them out!


r/espresso • • 6h ago

Buying Advice Needed Need help in choosing hand grinder for espresso [No Budget]

1 Upvotes

Hey guys as the post suggests I’m in need of a new hand grinder, due to my work i usually have to travel so can’t carry an electric grinder everywhere, i enjoy light to medium roasts and sometimes dark

For the machine i have mhw xpress58, I’m stuck between which to choose 1zpresso j ultra or mhw r3 pro

Any help would be appreciated 🙏


r/espresso • • 7h ago

Buying Advice Needed Best espresso grinder that allows for the occasional cold brew [600€]

2 Upvotes

As the title states, I am looking to upgrade my Sage Smart Grinder Pro, in hope for better adjustment settings and less exchanged retention. The one caveat is though that we enjoy cold brews as well, especially during the summer, and don't want another grinder to fill up our kitchen cabinets. This is where the versatility of the Sage works nicely.

Do you have any recommendations, or should I stick with my current grinder and only upgrade when the cold brew saga has ended?

I have looked into the DF64 Gen 2, but I have heard that it might not be too convenient when needing to grind a larger batch for e.g. cold brew.

Thanks for the help!