r/esp32projects • • 16d ago

Custom Digital Dash

Have had this idea for a while, finally got around to doing it for my Turbo BMW e36 coupe.
ESP32 7” touch screen from Elecrow taking in my CAN stream from ecumaster black with an Arduino nano for taking in BMW analog signals (turn signals, hi beams, fuel level etc) very stoked on fit and finish. Modeled in fusion.

Quite info dense but I wanted to be able to check all the info I would need from garages/laptop connected directly to my emu black.

Still on V1 and need to add a new can controller, as well as redesigning my back plate for better layout and screwing down the nano. Running a temp simulation to see what things would look like. Cuck coded with Chatgpt.

Still new-ish to ESP world, got my start in DIY electronics with Fpv drones two years ago

119 Upvotes

7 comments sorted by

2

u/Equivalent_Kick_6905 15d ago

Ola, eu melhoraria a interface, tem muito texto, algumas coisas poderiam ser mais minimalistas( como a voltagem da bateria e o AFR ocupando muito espaço) outros ícones poderiam ser apenas indicativos sem muito texto. Da uma limpada nessa GUI para concentrar o que realmente importa mas com acesso fácil as informações adicionais pode se tornar mais seguro para observa-la durante o uso real

2

u/Wesfilms 15d ago

It is a touch screen so I plan to make other layouts, right now this is what I want on screen for tuning and keeping an eye on things. Very information dense but the goal is to be able to view these values in front of me while I drive and not have my laptop connected to ECU/have to look away.

1

u/Level-Acid 15d ago

I like it. Lots of information and easy to read. Are those optocouplers in the back?

1

u/Wesfilms 15d ago

Yeah!!

1

u/aizatt 15d ago

Very nice project! Similar to my raspberry pi 4 digital dash taking canbus data from microsquirt ECU averyizatt.com

2

u/_boxy_brown_ 4d ago

I've been looking at doing something almost exactly like this for my FC rx-7 running a microsquirt amp'd. I've been running TunerStudio (and audio-visual entertainment stuff) on a pi5 under the dash, to a 10.4" display located in front of the center console. Wanted to run the second display output to a digital dash. Any reason this wouldn't work with CAN out in my case? Would love to chat with you about the project, in general, too, if you're cool with that.

1

u/aizatt 4d ago

No seems like with your arrangement can out would work great. Currently I have all sorts of custom electronics talking over canbus on my foxbody. Esp32s, arudinos a pi4 and the microsquirt plus two displays talk over canbus and it works great. Feel free to dm me or check out my website lots of technical info on there!