r/embeddedlinux • • Sep 16 '26 Bravo Mindblown

💬 discussion 💬 Embedded Linux: Starter Guide

159 Upvotes

This subreddit gets a lot of "how do I get started?" posts.

To keep the subreddit focused on specific technical questions, debugging, and project development, generic "how do I start?" posts will be removed.

If you're starting with Embedded Linux, read this first.

This is not meant to be the definitive guide. If you have better resources, recommendations, corrections, or useful advice, please add them in the comments.

Prerequisites

You don't need to be an expert, but you should have a decent foundation before jumping into Embedded Linux.

  • C programming: Pointers, structs, memory management, bitwise operations, basic debugging.

  • Linux: Comfortable with the command line, files, permissions, processes, SSH, Git, Make, and basic shell scripting.

  • Hardware: Know what GPIO, UART, I2C, SPI, interrupts, PWM, etc. are. Some experience with a microcontroller such as STM32 is a big plus.

If pointers and malloc() are still confusing, spend some time on C first.

Hardware

Get a board that is well supported and has good documentation. Don't start by trying to bring Linux up on your own custom PCB.

Some reasonable choices:

  • BeagleBone Black: Cheap, well documented, and good for learning the relationship between hardware, bootloader, kernel, Device Tree, and userspace.

  • STM32MP1 boards: Good if you want to work with the kind of ARM SoCs commonly found in industrial products.

  • NXP i.MX boards: Another good choice, particularly if you're interested in the platforms widely used in commercial products.

  • Raspberry Pi: Perfectly fine for learning Linux, networking, userspace applications, GPIO, etc. If your goal is specifically to learn bootloaders, Device Tree, BSPs and low-level kernel development, however, a more open/documented development board can be a better choice.

Don't spend months looking for the perfect board. Pick one and use it.

Understand the Pieces

Before getting lost in Yocto recipes, understand what you're actually building.

A typical Embedded Linux system looks roughly like:

Boot ROM
   |
   v
Bootloader (U-Boot)
   |
   +-- Hardware initialization
   +-- Load kernel
   +-- Load Device Tree
   |
   v
Linux Kernel
   |
   +-- Drivers
   +-- Device Tree
   +-- Kernel configuration
   |
   v
Root Filesystem
   |
   +-- libc
   +-- /dev /proc /sys
   +-- init (BusyBox/systemd/etc.)
   +-- Applications

You should eventually understand what each of these components does and how they communicate with each other.

Toolchain

The compiler and associated tools used to build software for your target architecture.

For example, an x86-64 PC can use a cross compiler to build binaries for ARM.

Bootloader

Usually U-Boot.

It performs early initialization and loads the kernel and Device Tree.

Learn about:

  • Boot commands

  • Environment variables

  • Boot arguments

  • Kernel loading

  • Device Tree loading

  • Storage

  • Network booting

Linux Kernel

The kernel provides the core OS functionality and contains the drivers that talk to your hardware.

Eventually you should be comfortable building a kernel, configuring it, reading kernel logs, loading modules, and navigating the kernel source.

Device Tree

On platforms that use it, Device Tree describes hardware to the kernel.

For example:

&i2c1 {
    status = "okay";

    eeprom@50 {
        compatible = "atmel,24c02";
        reg = <0x50>;
    };
};

If you're going to work seriously with ARM Linux, learn Device Tree.

Root Filesystem

The rootfs contains the userspace environment:

/bin
/etc
/lib
/usr
/dev
/proc
/sys

It also contains your applications, libraries, configuration, and init system.

Build Systems

Don't start by manually building an entire Linux filesystem package by package.

Use a build system.

Buildroot

Start here if you want to understand the basics quickly.

Buildroot can build your toolchain, bootloader, kernel, Device Tree, rootfs, and packages into a bootable system.

It's relatively straightforward and is a good way to understand what actually goes into an Embedded Linux image.

Yocto

Learn this when you need it.

Yocto is widely used for production systems and gives you much more flexibility for maintaining complex products, BSPs, machines, distributions, packages, and multiple configurations.

It also has a much steeper learning curve.

Don't try to learn Yocto by memorizing random variables from tutorials. Understand BitBake, recipes, tasks, layers, machine configuration, dependencies, and where things are coming from.

After That: Kernel & Drivers

Once you can build and boot a system, start looking at the kernel.

A reasonable progression is:

Linux userspace
    ↓
Boot process
    ↓
Device Tree
    ↓
Kernel configuration
    ↓
Kernel modules
    ↓
Drivers
    ↓
Kernel source
    ↓
Modify existing drivers
    ↓
Write/modify your own driver
    ↓
Debug it
    ↓
Submit patches upstream

Start by understanding existing drivers rather than immediately trying to write one from scratch.

GPIO, I2C, SPI, UART, LEDs, regulators, clocks and networking are all good areas to explore.

Resources

Mastering Embedded Linux Programming — Chris Simmonds

Probably the most useful single book to start with. It covers bootloaders, the kernel, Device Tree, drivers, filesystems, networking and build systems.

Bootlin Training Materials

Bootlin publishes its Embedded Linux, Linux Kernel, Device Tree, Buildroot and Yocto training materials online for free:

https://bootlin.com/training/

Embedded Linux Conference

ELC talks are worth watching once you have some practical experience. There are a lot of talks covering kernel development, hardware bring-up, Yocto, drivers, debugging and real-world problems.

Linux kernel documentation

Eventually, stop relying exclusively on tutorials and start reading the actual documentation and source:

Documentation/
Documentation/devicetree/
Documentation/driver-api/
Documentation/process/

Most Important Part

Don't spend six months reading about Embedded Linux before actually using it.

Get a board.

Boot Linux.

Connect some hardware.

Build a kernel.

Change the Device Tree.

Break something.

Figure out why it broke.

Then do it again.

There is no magic prerequisite list that makes you "ready" for Embedded Linux. You learn most of it by actually working on the system.


r/embeddedlinux • • Oct 22 '25

Yocto is not that interesting as I imagined it

80 Upvotes

So I recently switched a job to embedded linux opportunity, before I have worked as an embedded software engineers, I have done low level stuff and for past 2 years I have been working mostly on application level, RTOSs, desktop applications, even some devops etc.

I was seeing the industry move more towards embedded linux side, so that peaked my interest in kernel development and then yocto. luckily I got the opportunity in a company whose project is on going on yocto using nxp processor.

I feel like this is quite boring stuff, like you just write scripts, understanding environment is a mess and no ones knows how things are working behind the scenes.

I have done some compiling of uboot and kernels from source and I feel like that is much easier and transparent process then using yocto honestly.

Just a minor rant, as I am still stuck for a week since joining on building xD and I dont understand shit, and due to that I am doubting my ability lol


r/embeddedlinux • • Jul 15 '25

Career in Embedded Linux

50 Upvotes

Embedded Linux Developers, how does it differ from Firmware roles? I have seen that embedded Linux jobs aren't much available like firmware jobs.

Is a Career worth in Embedded Linux? What about the longevity of career? Like i seen many Embedded developers with more than 20 years YOE. I don't know much about Embedded Linux, Can you guys drop your opinion on Career in Embedded Linux? Has demand in future?


r/embeddedlinux • • Sep 20 '24

📢 news 📢 20 years later, real-time Linux makes it to the kernel

Thumbnail
phoronix.com
49 Upvotes

r/embeddedlinux • • Dec 03 '21

Awesome article about designing embedded Linux systems

Thumbnail
jaycarlson.net
42 Upvotes

r/embeddedlinux • • Oct 25 '24

What kind of things are you creating with embedded Linux?

41 Upvotes

I'm just curious to read what kind of products are you guys creating with the use of embedded Linux? Robots, AI vision systems, medical, HMI, etc..?


r/embeddedlinux • • 13d ago

project [Open Source] I built a Device Tree editor for Embedded Linux with live semantic validation

37 Upvotes

Hi everyone!

I've been working on a personal project called KernelGrove, and I'd like to share it with the Embedded Linux community.

If you've worked with Linux Device Trees, you probably know that dealing with complex .dts and .dtsi files can become quite tedious. Understanding which properties a device requires, navigating bindings, checking compatibility and debugging configuration errors often means jumping between source files, documentation and kernel code.

I wanted to make that workflow easier, so I started building KernelGrove.

It's a desktop Device Tree editor for Linux and Windows, designed to go beyond syntax highlighting and actually understand what you're writing.

Some of its main features:

  • Live semantic validation: Checks your Device Trees against the specification, kernel bindings, constants and overlay targets. It reports errors and warnings with their corresponding source lines.

  • Node inspector: Select a node and see which properties its compatible requires or accepts, their types and the kernel version in which the binding was introduced.

  • Graph visualization: Explore your Device Tree as a graph, including the hierarchy inherited from SoC .dtsi files.

  • Hardware and bindings catalogue: Search through 3,600+ SoCs and boards and 25,000+ device bindings.

  • Overlay builder: Create Device Tree overlays through a visual assistant and validate them against the base tree before compiling.

  • Additional tools: Binding-driven code completion, go-to-definition, Git integration and DTS/DTB conversion.

The project is currently in beta, and I've decided to release it as open source under the Apache 2.0 license.

A few things worth mentioning:

  • Available for Linux and Windows.

  • No account or subscription required.

  • Your Device Tree files stay locally on your machine.

  • Contributions, bug reports and suggestions are welcome!

Links:

Website: https://dt-studio.dev/

GitHub: https://github.com/serg4life/KernelGrove

I'd really appreciate feedback from people who regularly work with Linux Device Trees.

I'm particularly interested in hearing about your current workflow, the tools you use and what features you think are missing from existing Device Tree development tools.

Thanks for checking it out!


r/embeddedlinux • • Jan 06 '26

Is Yocto a good option to develop industrial products based on Embedded Linux?

36 Upvotes

I tried searching this in open forums like reddit and elsewhere and found conflicting responses which were equally convincing. I am planning to develop an Embedded Linux based product for industrial automation application. I have decent experience of bare metal and RTOS development but the current application demands more sophisticated firmware and hence will have to go with Linux. I would really like to know from someone who has gone through this before i.e., developed a scalable industrial solution based on Embedded Linux to share their experience - Is Yocto a good option to proceed with? Or do I choose something else?


r/embeddedlinux • • Sep 16 '20

BeagleBoards have a realtime co-processor called PRU, created a compiled language for it with a python like syntax called simpPRU

Thumbnail
github.com
36 Upvotes

r/embeddedlinux • • Jan 17 '22

Where to begin Linux device driver development

34 Upvotes

Hi, I am an engineering graduate and have been working with microcontrollers for the past 3 years. Recently I had started learning linux programming with gcc for embedded based applications on an ARM based SOC. I now want to learn linux device driver implementation. Are there some good online courses that I can use. What kind of projects can I do for learning purpose.


r/embeddedlinux • • Jun 15 '21

I’m putting a WiFi router into a wall charger (Part 1)

Thumbnail
machinehum.medium.com
34 Upvotes

r/embeddedlinux • • Nov 05 '25

Embedded Linux Engineer vs IoT Engineer

33 Upvotes

Hello everyone,

I’m new to this sub and would appreciate if you could share some career progression insight.

I have 4 years of experience working on embedded system mostly on FreeRTOS. Recently I am looking for new job and landed with 2 offers.

One is 55kGBP base working as an embedded system engineer in a cybersecurity company in London, UK. Hybrid role.

Responsibilities involves boards bring up, perform integration and test of software, firmware and hardware. Work on Linux kernel, Yocto and AOSP. I don’t have experience on the Linux side.

Another offer is 60kGBP base working as an IoT Engineer for a logistics company providing asset monitoring application. Fully remote.

Responsibilities involves designing embedded firmware for low power IoT devices, implement wireless communication integration such as BLE, LoRA or Cellular. Contribute to deploy and employment of scalable IoT cloud architecture. I don’t have experience on the cloud integration side.

I like both roles and am ready to take on new challenge. But I would like to compare career progression in the embedded Linux side and would appreciate any comments! I’m based in London, UK.

Many thanks.


r/embeddedlinux • • Feb 25 '26

RaspberryPi vs BeagleBone vs STM32MP1 – Which one board should I choose to learn Embedded Linux?

32 Upvotes

Hi everyone,

I’m an embedded software engineer with 17 years of MCU experience, but I’m brand new to Linux. My long-term goal is to move into embedded Linux development.

I don’t want to buy and manage multiple boards. Ideally, I want one board that I can use to:

  • Learn Linux fundamentals (CLI, bash, C, git, networking)

  • Then progress into embedded Linux (bootloader, kernel, device tree, Yocto/Buildroot, drivers, GPIO, I2C, SPI)

I’m currently considering:

  • Raspberry Pi

  • BeagleBone Black

  • STM32MP1 (e.g., STM32MP157 Discovery)

For someone starting from zero in Linux but aiming for professional embedded Linux skills, which board would you recommend as a single long-term platform?

I’d really appreciate hearing from people who’ve used these boards in learning or professional work.

Thanks!


r/embeddedlinux • • Dec 30 '25

Milestone: My journey of learning Embedded Linux.

32 Upvotes

Before 6 months I started to learn Embedded Linux.

I can now cross compile latest linux kernel source and flash it running on the board without reset. I can also configure it to enable/disable features.

I can use tftp to fetch kernel from PC. and also can use network file system as a rootfs.

Instead of tftp and nfs, I can put everything on SD card and run linux from there.

I have a general idea about filesystems how to mount it on a device.

I understand some things about device tree, device discovery and kernel modules.

journey continues...


r/embeddedlinux • • Dec 13 '25

How to start learning Embedded Linux?

32 Upvotes

I want to start learning Embedded Linux but I’m confused about the right order.

Should I begin with Linux basics and shell scripting, or jump into cross-compilation and Buildroot/Yocto? When should kernel, device tree, and driver development come into the picture?

Also, is it better to start with real hardware (Raspberry Pi / BeagleBone) or with QEMU?

Looking for advice from people who’ve already gone through this path.


r/embeddedlinux • • Apr 12 '23

Guy makes like 20 pcbs with different chips and boots minimal linux on each blog

32 Upvotes

I bookmarked a cool blog where a guy took around 20 different chips and built pcbs from them and got them all to the point he could boot linux and get to a terminal....but i've lost the book mark and my google foo hasn't been good enough to find it again.

Does anyone know the blog i'm talking about?


r/embeddedlinux • • Sep 21 '25

Getting started with Linux in general and embedded Linux

31 Upvotes

I have 3+ years of experience working in embedded industry, which focus mostly on Classic AUTOSAR, bare-metal programming and RTOS. Recently, I wanted to switch myself to the land of embedded Linux but didn't know where to start. I know that there are many topics related to Linux like process/thread, OS, filesystem, etc. but each of those topic are just too vast that I seemed to go very deep down a rabbit hole.

I have tried to ask ChatGPT to make up a plan but I gave up after 1 week of it giving me too much garbage and it kept forgetting things.

So it is much appreciated if you can help to provide resources for my plan below:

General Linux (syscalls, filesystem, process/signal/thread, etc.) → Embedded Linux (build systems like Yocto, device driver development, bootloader, etc.) → C++ and Adaptive AUTOSAR

Resources could be anything such as Youtube playlists, websites, Udemy courses, books to read, etc.

Thanks :)


r/embeddedlinux • • May 23 '26

I recently had a technical interview round of Intermediate Firmware Engineer role and here are most of the questions that I got asked.

30 Upvotes

In your resume you said you developed robust firmware for ESP32 loT edge devices. How do you make your firmware robust ?

How do you follow Misra C?

in this job that says you integrated free RTOS based multitasking to manage current operations. What flavor of multitasking did you use?

In your previous company were you the one who was choosing how to configure the RTOS or was that given to you already?

Esp32 is dual core and how would you schedule tasks using freertos.

When you say heavy(tasks in rtos), I assume assume you mean heavily loaded as in they have a lot of processing to do. If they're heavily loaded, does that mean you would prefer to use preemptive or does that mean you would prefer to use round robin?

Firmware developers declare variables as volatile. Why would you declare a variable as volatile?

If we hire you and it's your first week on the job and you got a desk and it's got lots of space on it and I say you can have any debug tools that you want, any debug environment to work on a typical embedded system firmware development. What's your desk going to look like?

In summary section you say proven ability to optimize system performance, reduce latency and implement efficient communication protocols. So, can you give me specific examples of each of these and how would you implement it?

Reducing stack and heap usage. So one of the things that sometimes happens, is we write our firmware and then we start running out of memory and we don't have enough memory. So what techniques can you use to optimize your memory usage?

Protocol you had the choice to run one at 115200 baud rate or 9600 baud rate. Do you see one of those as being more efficient than the other?

If you were given choice of WFH or in-person, which would you choose any why.

P.S. I'll let you know If I get selected for next round.


r/embeddedlinux • • Feb 12 '26

Moving from STM32 Bare Metal to Embedded Linux for remote work. Advice needed.

30 Upvotes

Hi everyone,

I’m an embedded engineer in Central Asia and I’ve pretty much hit the ceiling here. The local market is tiny (maybe 6-8 job openings in the whole country with lower salaries) and growth is non-existent in my opinion. I’m looking to transition into Embedded Linux specifically to find international remote roles.

My current background:

  • MCU: Mostly C and STM32. Lately, I've been working on small features for our LoRa devices(although they are not yet merged to a main firmware). But mostly I develop automated test jigs for our production line, both PCBs and firmware.

  • Hardware: I design medium-complexity PCBs in Altium Designer and Kicad. My boards are used for factory automation and testing(nothing super advanced, just some OA's for current sensing).

  • Linux: I’m a hobbyist. I run a home server with Proxmox and Home Assistant, but I only know the CLI at a "tutorial follower" level. No professional experience with Yocto, Kernel drivers, or POSIX.

My plan: I want to learn GCC toolchains, Yocto, and writing Kernel drivers. I have some RPi 4/5 and STM32WB boards to build a portfolio project (maybe some kind of wireless gateway?).

I have a few questions:

  1. Is remote work common for Embedded Linux roles? Is it easier to find a remote job in embedded linux than in pure bare metal with MCUs?

  2. Does my hardware/Altium background add any value for remote Linux roles, or are these worlds usually separated?

  3. Will a solid GitHub project (Yocto + custom drivers + C++17 apps) be enough to get noticed by EU/US recruiters given my region? Or maybe there are some certificates that I should get from online courses?

  4. Is the market for Middle-level Linux roles saturated right now?

  5. Do I need a lab for embedded linux? I assume that all the hardware will already be developed and tested and I won't need a scope(although I'm ready to invest with my own money if needed).

I'm ready to put in the work(and oh boy, I need a lot of it, I know i'm not that good), but I want to make sure I'm not chasing a dead end. Any advice is appreciated. Thank you!


r/embeddedlinux • • Jan 07 '26

I am a C developer (1.5 years), and I wanted to learn about low level development like device drivers. Where should I start?

30 Upvotes

I have been working with C for about 1.5 years now, mostly in the application side of things. I have created applications that run on routers, but now I want to go deeper. I seriously don't have much idea of what I am doing, and so I thought of starting off with device driver development. My background is in computer science btw

Now, I know there are resources like LDD3 which can help me with this, but tbh, they are kinda hard to understand for me. I wanted to know if there's a more interactive way to learn, like a set of coding problems which will help me learn about device drivers.

Also I don't want to limit myself with just device drivers. I want to explore and see what is best for me. So if possible, it would be really helpful if I can be guided on what other interesting fields are there when you go low level.

One last thing, if there are any useful mentorship/trainings that I can add to my resume, that will be a plus.

I am sorry, if my wordings are vague. I am not sure where to begin my journey properly, but i do know that I want to go lower in terms of programming.


r/embeddedlinux • • Dec 09 '25

How to move from beginner to intermediate embedded Linux developer

30 Upvotes

So i completed two of the bootlin courses about embedded linux and linux kernel driver development. In the second course i learned about I2C, UART driver, interrupts, DMA.

I want to get a job in embedded Linux field but right now my experience is in MCUs, RTOS only. What should i learn next in embedded linux or driver development to get an intermediate role as embedded Linux developer?

Thanks.


r/embeddedlinux • • Sep 29 '25

Need help to learn Embedded Linux for a College Student

30 Upvotes

I am a final year, Electrical and Electronics Engineering Student, and I haves some experience with Bare Metal Development, FreeRTOS. I want to shift towards Embedded Linux Development, as the companies like Visteon, Aptiv (which work on automotive oem parts) are coming for on campus recruitments. I asked one of the recruiters, regarding their requirements, he told to learn the qualcomm sdk. So, I thought this will be a good place to start.


r/embeddedlinux • • Sep 12 '24

Please give me an honest opinion about my embedded Youtube Shorts Project

30 Upvotes

Hello,

I'm an Embedded Linux Engineer working on BSP. It's quite an obscure job which is hard to show and explain.

This is why I want to try to make some vulgarization about it.

For example, I would like to explain the good practices to secure a product (removing defconfig, using overlays, RAUC...) or how to make cool stuff in a few steps.

So, I trying to create YouTube shorts to try a not common format and it's quite cool to explain things with the 1 minute restriction.

But, I want to have an honest opinion of what I've done, for the moment, to improve myself :

https://www.youtube.com/shorts/2q_nKYw6WPw

https://www.youtube.com/shorts/g63ZA-ChhmU

I take all critics even to say this is pure sh*t.

Yeah, I know for my strong accent but can't do anything about it.


r/embeddedlinux • • Jun 09 '21

A dockerized yocto development environment in a single script

Thumbnail
github.com
29 Upvotes