r/edrums • • 7h ago

Roland sounds are .. underwhelming?

19 Upvotes

I got a v51 kit early 2026. I've had a ton with it, but I have a gripe.

For $3000-$4000 , you would think the sounds on the module would be on-par with something like Superior Drummer (which I have, and use).

With the stock kits, there are only a few drum sets I actually even think sound good, and the problem is that even these good sounding ones (Vintage Loose and Dry and Muffled are my 2 favorites), they clearly do not have anywhere near the dimensional detail, round robins, etc that something like Superior Drummer has, and it's not even close.

Whats up with that? Does Roland really just skimp on the CPU and disk space for these modules? Obviously the hardware itself and it's MIDI capabilities are all there.

I will say that the one advantage (besides boot up and play), is that the native kits do have a diferent "responsiveness" that can be especially felt on the hi-hat and ride cymbals, in my experience.

It's also frustrating that you apparently need a subscription to download more kits, which are revoked when you stop paying? I think I had six months free but I never even figured it out.


r/edrums • • 7h ago

Hardware Recommendation Roland V51 TD-516 Double Kick

Thumbnail
gallery
13 Upvotes

Hey all, first post here. Brief introduction: I just recently got into playing drums (e-kit), however I’ve written and programmed them for over 10 years so have a good grasp on the fundamentals.

Anyways, I want to start messing around with some double pedal stuff, not too intensive though. I’m currently riding the struggle bus and want to get a double pedal config the cheapest or easiest way I can. (If you didn’t see in the pictures, currently using the 2nd gen dw3000 single).

Oh and might as well ask.. I’m super short lol (5’2 1/2-5’3). It has been a struggle getting this kit comfortable but now I almost have it to my liking. Besides fighting my brain on the kick drum comfortability (not exactly the beater) and the high hat moving. Any suggestions?

Thanks! :D


r/edrums • • 44m ago

NEW PRODUCT Practising stickings on an e-kit: can you hear the downbeat over your snare?

1 Upvotes

I’m looking for an e-kit player’s ears on a free practice tool I built. The browser plays the click and follows the sticking; the kit just supplies your drum sound. It doesn’t use MIDI or grade your hits.

If you already mix phone or computer audio into your headphones, would you try a few bars with your usual snare sound? In Settings you can pick the default click, woodblock, rim or soft click. I’d love to know which one you can pick out over your snare without having to turn the whole backing track up. Your module or headphone setup would be useful context.

Here’s the exercise: https://sticktempo.com/exercises/single-beat-combinations/5/


r/edrums • • 1h ago

Conversion batterie electronique Roland TD17L en batterie hybride

1 Upvotes

Bonjour à tous !

Je reprends la batterie après 15 ans d'arrêt. Pour reprendre sans faire trop de frais, j'ai pris une batterie electronique d'occasion Roland TD17L.

J'ai très envie de jouer sur une acoustique mais, comme beaucoup de batteurs, cela est compliqué avec le voisinage. J'ai vu passer quelques articles et vidéos qui parlaient de convertir une batterie acoustique en hybride.

Je me suis dis que cela pourrait être une alternative mais je ne suis pas certaine que ce soit vraiment moins cher au final que d'acheter une électronique plus réaliste que celle que j'ai actuellement...

Je me demandais s'il était possible de récupérer certains éléments de ma batterie électronique et de pouvoir les utiliser avec une batterie acoustique d'occasion que je transformerai en hybride... Si c'est possible, quel éléments je pourrais conserver de ma batterie electronique ? Le module ? Les triggers ? Les câbles ? Quoi d'autres ? Et que devrais-je prévoir en plus pour convertir une batterie acoustique ?

Pensez-vous que si je peux recuperer certains éléments de ma batteire electronique, cela pourrait être intéressant financièrement ou vaut-il mieux patienter et économiser pour acheter un jour un kit électronique plus réaliste ?

Merci pour vos réponses !


r/edrums • • 20h ago

Roland v51 auto off not working?

Post image
8 Upvotes

New kit. Auto off was working. Now it isn't. Any ideas? Here is what it looks like. Seems to be on.


r/edrums • • 13h ago

Help - Alesis Am I stupid? Nitro Max module replacement

2 Upvotes

I killed my old Nitro Max module by using the wrong power supply like a moron, so I had to buy another module, but replacement Max modules cost almost as much as a new kit so I went with a Turbo Mesh module that was only 55 bucks on eBay. Problem now is that the crash and ride are swapped and the hihat and kick don't work! I'm using the original Nitro Max snake cable, I don't have any extensive knowledge on much of anything, and searching online didn't yield any helpful results.


r/edrums • • 20h ago

Purchasing Advice Korg MPS-10 Advice

Post image
3 Upvotes

This isn't "Should I Buy the Korg MPS-10." Already did that -- it was 500 quid at Sweetwater, and I knew I'd kick myself if I didn't -- and it gets here Monday. So here's my dilemma: I don't need a huge setup, which is why I went with this one in the first place. Kick, snare, hats, and a crash-ride would do me just fine.

I was under the impression that each zone needed its own input, though, so (for instance) a two-zone snare would take two inputs, as would a two-zone cymbal. Is that wrong, or am I right and using single inputs the way the kit in the picture (from Korg's site) would mean having to assign velocity layers for different stuff? And are there particular pads that do or don't get along as well with this multipad? Any input (pardon the pun) and/or suggestions/advice would be much appreciated.


r/edrums • • 18h ago

Tips for piece meal e drum upgrades

Thumbnail reddit.com
1 Upvotes

r/edrums • • 18h ago

Purchasing Advice Efnote 5 / Vad716 comparision

0 Upvotes

Today I tested both.

Roland looks like a tank and feels very good... but i cant believe how much shit sounds they filled into this module. I really cant believe it.

Im going the Efnote route just because I dont believe Roland is specialized for only a few kits.. and there Efnote beats Roland. The kits on Efnote are all pimped and fine tuned to perfection and even the Roland DW expansions pack sound artificial in some way to me.

I really like the Roland module but somehow it just has too much settings. The toms feels better on Efnote. The hi hat feel is similar. The snare? I dont know.....Thr Roland snare def looks more premium, but in reality i dont hear much difference.

Its Efnote Aura vs VAD516 now. How much Expansion for Roland are now available? When you try these you want to delethe the whole Roland default library. At least I would. So much shitty kits bother me a lot.But I guess u cant delete the default kits or?

A little disappointed!!!


r/edrums • • 19h ago

Recommendations

Thumbnail reddit.com
0 Upvotes

r/edrums • • 1d ago

Show Off Your Kit Just finished upgrading my Alesis drum pads for a more realistic look! (Before & After

26 Upvotes

Wanted to share a project I’ve been working on! This is 100% for aesthetics—zero sound improvements, I just wanted my Alesis e-kit to look more like a acoustic kit. So I put my 3D printer to work for me. Using Fusion360 and my Bambu Printer, project completed.

I converted my standard, flat drum pads into these realistic, deep-shell-looking drums with a marble wrap, chrome-style lugs, and tension rods. It was a super fun project to tackle and I'm really happy with how much more "acoustic" it feels to sit behind now.


r/edrums • • 1d ago

Help - Alesis hi hat problem

13 Upvotes

so i’ve had this alesis nitro pro xl since the middle of may of this year and for the past week it’s been giving me problems especially with the hi hat. when i hit the hi hat its not responding to some hits unless i hit it hard. i put the sensitivity all the way to the max but nothings working. i’d appreciate the help!! thanks reddit


r/edrums • • 1d ago

Purchasing Advice Alesis Nitro Ultimate vs NUX DM310H

1 Upvotes

I’ve been comparing the 2 for a long time, if anyone owns either of them I would appreciate some insight!


r/edrums • • 1d ago

PROBLEM SOLVED Problem with PDP double kick pedal

0 Upvotes

r/edrums • • 2d ago

Final Update – My Alesis Nitro Max has reached its final form. The 15-inch spaceship has landed!

Thumbnail gallery
15 Upvotes

r/edrums • • 1d ago

trying Zoom L6 Max as auditor interface for PC Zoom lessons

1 Upvotes

Yes, this is AI text since it can summarize my learnings faster based on discussions i've spent whole evening to set things up and failed :(

Right now I’m using an SSL 2 (v1) for remote e-drum lessons on Zoom, which works great for just drums + mic—no echo, dead simple. The problem is I'm outgrowing it: I need to add one more instrument (electric guitar), which the 2-input SSL 2 can't handle, and I also want to record video on my phone with clean audio straight from the interface (where the SSL 2 is a limiting factor).

So I picked up a Zoom LiveTrak L6max (firmware v1.10) to test as an all-in-one replacement on my Windows PC, and figured I’d share what actually works vs. what’s a headache if anyone else is looking at it for online lessons or calls.

Current L6max Test Setup:

  • Ch 1: Shure WH20XLR headset mic

  • Ch 5: Roland TD-17KV (leaving room to add electric guitar)

  • Ch 7 (USB 1/2): PC / Zoom return audio

  • Headphones in SUB-OUT (set to SUB-MIX), Simmons DA2108 on MASTER (kept completely off during Zoom calls)

What works well:

  • Custom headphone monitoring (SUB-MIX): Once SUB-OUT is switched to SUB-MIX (both the physical switch and in the L6 Editor), having dedicated encoders for LEVEL vs SUB-MIX is awesome. Easy to dial in drums + laptop audio in my ears independently.

  • More I/O and phone-friendly workflow: Solves the input limit of the SSL 2 for adding guitar, plus gives direct recording/mobile flexibility without extra workarounds.

What doesn't work / needs extra software:

  • Windows/Zoom lumps everything into one Line (Zoom L6max Audio) device: Windows sees the 14-in/4-out interface, seems to sum/grab across the multitrack stream into a single Line input for Zoom, and completely ignores physical channel mutes and levels. Even if I mute Ch 1 or Ch 5 in both LEVEL and SUB-MIX, Zoom still hears the raw channels.

  • Teacher constantly hears themselves (Mix Minus doesn't fix it): Because Windows/Zoom is pulling from that summed/multitrack stream instead of just the post-fader Master bus, the teacher's incoming voice gets grabbed and sent right back to them as a delayed echo—every time, not just occasionally. Turning USB Mix Minus ON/OFF in the menu didn't stop it, even with Original Sound for Musicians on and my speaker completely off.

  • Stuck in 32-bit float on Windows: Tried switching the device format from 32-bit float down to 24-bit in Windows Sound settings to see if it helped compatibility, and Windows permanently throws an "audio device is busy" error—even with Zoom and every other audio app closed.

  • Native L6 Editor doesn't solve USB call routing: The native Zoom L6 Editor app is mostly unhelpful here—it won't split or isolate which tracks Windows feeds into Zoom. You likely need a third-party virtual routing app like Voicemeeter to manage those individual tracks and feed a clean virtual mic to Zoom.

Anyone running the L6max on Windows managed to force Zoom to only take the Master stereo mix—or get around the "device is busy" lock to switch out of 32-bit float?


r/edrums • • 1d ago

For Sale By Owner Selling some Roland pads (see body text for details).

Thumbnail
gallery
1 Upvotes

I recently upgraded to a Hawk (eDrumCenter’s custom kit) and I’m selling a few of my Roland pads:

KD-14 kick pad (AWESOME kick pad) - $400/$35 shipping
PDX-100 tom pad - $100/$15 shipping
PDA100-L tom pad - $150/$15 shipping
MDS-STD2 rack (with two Gibraltar extender arms) - $100/$25 shipping)

I can send links to eBay/Reverb listings if you are more comfortable purchasing that way (I totally understand).

Edit: added prices and shipping

Message me if interested. Totally willing to make deals on these. Thanks!


r/edrums • • 1d ago

Help - Roland Buying a new E-Drum Kit, Looking for Advice

2 Upvotes

Hi all! I’ve been using the same set of Roland TD-4 E-drums since I was 16 (I’m 31 now)(no I’m not kidding). They’ve most served as a travel kit for when I’ve lived in an apartment/dorm environment for that time. My main acoustic kit is at my parents. Despite some water damage and overall wear and tear, they still work fine with little issue. I mainly haven’t upgraded them during this time due to expense, and due to the limited space I have had to play. I also honestly stepped away from drumming for some time after college while I was pursuing my law degree and in the early stages of my career and just had less passion for drumming in general for a while. Up until the last few months, I hadn’t been practicing much if at all.

Recently however, my passion for the hobby came back and I now have the money, time and space to actually upgrade my electric kit (I still have downstairs neighbors unfortunately so no acoustic just yet). In addition, besides just being overall outdated, the TD-4 is very cramped for me as a bigger taller person. As a result, I am looking to make a big upgrade and wanted some opinions since I’ve been out of the E-Drum game for quite awhile.

My budget is $3-4k, which includes budget for a new double pedal and possibly a new drum rug. The set I’m keen on right now is the Roland V-Drums VAD103. I like the aesthetic of it and feel more comfortable with it as someone who grew up mostly practicing on an acoustic kit. Having the extra customization and space is nice as well. Additionally, I have old hardware for the snare, hi hat and cymbals as well. But this would also be a fairly big purchase so I want to be sure this is what I want before I pull the trigger.

Based on the above, I have a few questions:

  1. Does anyone here have or have used the VAD103 and have any opinions on it? The consensus I get from the internet is that the hardware is great but the drum brain could be better.

  2. Are they any other kits that would fit in my budget that anyone would recommend other than the VAD103?

  3. What is the best way to soundproof for a kit like the VAD103 when you have downstairs neighbors? For my TD-4 set, I have a crude set up of sound proofing tiles, rubber gym flooring tiles and a thin rug. It works well enough but it pretty unstable and looks kinda crude. Would a drum rig be a better option? Is there a better DIY option to use?

Thanks in advance for all the help, I appreciate it.


r/edrums • • 2d ago

Purchasing Advice Need advice from experienced people!

Post image
14 Upvotes

I’ve been wanting a drum set for a while and finally decided to purchase one. Opted for electric since I live with others and would love to have it in my room. Looking to spend about $1,000.. which leads me to the problem. I love the look of acoustic drums and definitely want it similar, but they come with a huge price tag. Came across the Millennium Mps 1000 Electric Drum and loved it. I just couldn’t justify the $800 shipping cost to Canada on Thomann. I did find one for $560 USD, but I would have to drive almost 5 hours to pick it up. Is this worth it, or are there better options?


r/edrums • • 1d ago

Roland TD7 hihat issues

1 Upvotes

Hi. I was having issues with the hi-hat so I bought the replacement rubber impact thing and circuit thingy. First I tried replacing just the rubber but it wasn't working so I took it apart and replaced the circuit dealy. I seemed good but didn't last. I thought maybe the electronic connection had slipped so I reseated it but almost no response. It was actually better before I started. I'm wondering now if I replaced the rubber upside down or something. Any suggestions? maybe I should just buy a used replacement for the whole pedal?


r/edrums • • 1d ago

Beginner Needs Help Apartment Advice - is it possible for my space?

2 Upvotes

Hi- I’m looking for advice to see if my apartment would be reasonable to play e-drums in without having issues with neighbors.

here’s a description of my apartment-

  1. on the first floor

  2. building built in 2020

  3. all plank flooring

  4. only shares one wall with another unit, the wall id put my drums at just has an outdoor hallway on the other side of it

Do you think it’s possible to do it in my situation, or am I better off just picking out a new different instrument that doesn’t have the noise problem that drums have? Please let me know any other tips you have that would allow me to make the situation work for e-drums. I don’t mind spending a bit more if that’s what it takes.


r/edrums • • 2d ago

Guess what just arrived!

Post image
76 Upvotes

My new T950 kit. Now, what sound module should I attach? I have an extra Alesis Strike Pro, but since I can no longer add kits to it, I am thinking the Roland TD-17.

edit: So I got 3 boxes but it said there should be 4. I am waiting to open these up until I find out more. Did any of you who got the T950 w/o a module get 4 boxes?


r/edrums • • 1d ago

Purchasing Advice Does the Roland coach mode o the TD316 (V31 module) actually worth the money?

1 Upvotes

Hey edrummers,
Please help me! I'm thorn between:
- Roland TD316 (2200 with hardware)
- Yamaha 6K5 (1700 euros with hardware but in stock only from Jan/Febr)

At the moment I do not have a drumset, I've been off for quite some time and I've started taking some classes with a drummer a few weeks ago.

I thought the Yamaha would be good enough for a semi beginner like me, but I can find the Roland sooner from a store here.

Since I can't decide I am wondering, would worth spending the extra money and getting the Roland?
Does the coach mode actually helps improving the technique?

I'm not a total beginner and I know the basic rudiments.

The store does not have it on display so I can't try it.

Thank you all
Happy edrumming!


r/edrums • • 1d ago

Purchasing Advice Lemon t950 + V31 module + Roland digital snare (later)

2 Upvotes

Ok final post to sense check!

This seems to be a good combo for what I'm after, bang for buck full kit, good module and the newer digital snare to get as realistic a sound as possible.

Snare will come later as an upgrade.

Can anyone see any issues with this combo?