It all started back in May.
I had an old home theater amplifier built around TDA7293 chips, paired with some old BBK speakers. I wanted something better for listening to music, so I decided to build a pair of proper 3-way floorstanding speakers from scratch.
Drivers
After quite a bit of research, I settled on:
Woofer: Vifa NE225W-08 (8", 8 Ohm, neodymium magnet).
Midrange: HiVi DMN-A (dome midrange driver).
Tweeter: HiVi RT2C-A (ribbon tweeter).
All three drivers have excellent specifications, and I really liked their appearance too.
Design and enclosure
I looked through countless speaker designs but couldn't find anything I really liked. So I decided to create my own.
The speakers feature sealed enclosures with approximately 30 liters of internal volume for the woofers. The cabinet walls are 19 mm thick, with additional internal bracing and reinforcement. The midrange driver has its own isolated chamber.
My goal was to achieve clean, tight and controlled bass without port noise or unwanted resonances.
The AER SONUS logo
One of my favorite parts of this project was creating the logo.
The name AER SONUS roughly translates from Latin as "air sound". I wanted the logo to look as if it were floating inside transparent resin.
I designed it, 3D-printed the individual parts, filled them with tinted transparent resin, and then spent quite a bit of time sanding and polishing everything.
The result is a logo suspended inside a solid block of transparent resin, exactly as I had imagined!
Passive crossovers
Originally, these speakers were designed to work with my old amplifier, so I decided to use passive crossovers instead of active DSP filters.
The crossover frequencies are 1200 Hz and 4200 Hz, using Linkwitz-Riley 4th-order filters (24 dB/octave).
I also added:
A Zobel network for the woofer.
L-pad attenuators to match the midrange and tweeter sensitivity.
All inductors were calculated, wound by hand and measured to achieve the required inductance.
I also designed the crossover layouts in 3D to position the components properly and minimize magnetic interference between the inductors.
Cabinet construction
The project took much longer than expected, mainly due to delays from the contractors responsible for cutting the cabinet parts and finishing the exterior panels.
Eventually, I had to handle the final assembly myself. The cabinets were assembled using adhesive sealant, screws and metal brackets. Each speaker has 22 reinforcement brackets!
The decorative front panels are made from 10 mm MDF. The black panels have a matte textured finish, while the lighter panels are wrapped in fabric.
Inside, the cabinets feature several layers of damping and sound-absorbing materials, including acoustic foam and polyester fiber filling.
The final result
Each speaker weighs 37 kg (81.5 lbs).
After assembly, I measured the frequency response using a measurement microphone and made the final adjustments with the parametric DSP equalizer in my new amplifier.
And I'm absolutely happy with the result!
The sound is detailed, the vocals are clean, and the soundstage is so wide that the speakers practically disappear. Instruments seem to occupy their own positions in space.
The bass is exactly what I wanted: fast, tight and controlled. Drums sound particularly impressive.
Five months of work, countless experiments, 3D printing, woodworking and plenty of patience. Absolutely worth it!