r/customcontrollers • • Sep 20 '26

Controller shaving pt.5 (Final)

I know I said I would go with the honeycomb design, but I low-key didn’t want to so I went with the circle design. I hope that y’all guys have found this as I’m using an entertaining as I have found this fun and awesome to do if y’all have any other suggestion suggestions for more controller shaving please feel free to come and send them my way.
Oh and I forgot to mention I made the buttons mouse click along with the bumpers and made pseudo mouse click triggers!
Pt.4! https://www.reddit.com/r/customcontrollers/s/sJIQoCEuYn

0 Upvotes

160 comments sorted by

17

u/Nicksanchez137 Sep 20 '26 • Bravo

God I hate that

6

u/Pabmyster04 Sep 20 '26

It's giving me trypophobia

1

u/NathanS116 Sep 20 '26

lol does have lots of bumps and holes lol

1

u/Mikahl757 Sep 20 '26

It's giving me goosebumps

4

u/PaperNo5985 Sep 20 '26

Holes in the black trim piece

3

u/NathanS116 Sep 20 '26

lol will do boss

3

u/Upstairs-Adagio2562 Sep 21 '26

black trim isn't even necessary at all? if you're going for weight reduction (looks have obviously gone out the window) ditch the black trim altogether

nvm read your other comment

1

u/NathanS116 Sep 21 '26

Nah bro looks ain’t out the window lol plus I just put the black trim there for the photo mb

1

u/NathanS116 Sep 21 '26

lol you’re all good

2

u/thebigfreak3 Sep 20 '26

Why trim at all?

1

u/NathanS116 Sep 21 '26

Don’t worry, no trim

3

u/New_Distribution9202 Sep 20 '26

Removing the lighting diffuser under the touch pad will help shave weight and there should be two plastic pieces in the actual bracket the touch pad board connects to you can remove as well

1

u/NathanS116 Sep 20 '26

Yep good eye I did that

1

u/New_Distribution9202 Sep 20 '26

You also dont NEEEED the black trim could looks funky but its purely cosmetic if were being honest

2

u/NathanS116 Sep 20 '26

Yeah I just had it on for the picture lol

1

u/PaperNo5985 Sep 21 '26

Holes in the purple part of the joystick as well. Maybe some little holes in the bumpers/triggers. This will be the easiest controller to clean lol

1

u/NathanS116 Sep 21 '26

Hollup now… new controller series?

1

u/NathanS116 Sep 21 '26

Controller gunking part.1!

1

u/PaperNo5985 Sep 21 '26

I'm tuned in. This is badass lol

1

u/NathanS116 Sep 21 '26

Ughhh fine I’ll guess I’ll get my hands on more spare DS5’s 🤣

1

u/New_Distribution9202 Sep 21 '26

Gotta do a HEAVIEST controller you could make

→ More replies (0)

2

u/AntwanMinson Sep 20 '26

Trypophobia

1

u/NathanS116 Sep 20 '26

Not the first person to say that lol!

1

u/AntwanMinson Sep 21 '26

Yeah I saw that. My wife said it, I posted then I saw someone else say it.

1

u/NathanS116 Sep 21 '26

lol well I’m glad you find it amusing

2

u/XxDemonxXIG Sep 20 '26

Give those speed holes a lil chamfer and sheeeesh she be looking sexy!!

1

u/NathanS116 Sep 21 '26

I’ll try it out

1

u/NathanS116 Sep 21 '26

Idk just make time for it ig

1

u/creature04 Sep 20 '26

The right side looks a bit cooler compared to left.

2

u/NathanS116 Sep 20 '26

Thank you for noticing! I got better as I went along lol

1

u/Mikahl757 Sep 20 '26

Does this help with GDQ challenges since the Power To Weight Ratio has been optimized? The Battery can be removed for wired connection

1

u/NathanS116 Sep 20 '26

Dude it helps massively the battery goes from lasting maybe 8-10 hours to lasting at least 15

1

u/lobotomized_salmon Sep 20 '26

whats the advantage of saving weight?

1

u/NathanS116 Sep 20 '26

I more so wanted to challenge myself and it helps for longer sessions

1

u/sober_yeast Sep 21 '26

No it doesn't. The battery, triggers, and rumble motors are 99% of the weight. You took like 10% off of 1% of the weight. This controller probably weighs a few grams less than a stock one, no way it's noticeable in hand.

2

u/NathanS116 Sep 21 '26

Please check my other controller shaving posts that are connected to this one

1

u/GullibleRisk2837 Sep 21 '26

Bro, do you not rest your arms on anything when playing?

1

u/NathanS116 Sep 21 '26

No, I am privileged with arm rests just overall it helps a bit

1

u/GullibleRisk2837 Sep 21 '26

But how if you don't have to have it up? Lol

1

u/GettinMe-Mallet Sep 20 '26

Not part of the sub, why?

1

u/NathanS116 Sep 20 '26

You can always go check the other parts for more reasoning but all in all I wanted to challenge myself, is fun to do, helps out for longer gaming sessions 15-17 hours and looks cool

1

u/GreenFuturesMatter Sep 21 '26

How does this help longer sessions?

1

u/NathanS116 Sep 21 '26

It’s pretty sweet man. I can go bout 15+hours with the battery considering I took out haptics and rumbles and it’s lighter by a lot!

1

u/GreenFuturesMatter Sep 21 '26

Oh I mean the weight thing drilling holes lol.

I’m 99.9% unbothered by battery life and use an edge controller. Also able to sit down and play for long hours so this is just stranger

1

u/NathanS116 Sep 21 '26

Oh the holes are just from some commenters in pt3 and who am I to refuse the fun lol but it does decrease more weight

1

u/GreenFuturesMatter Sep 21 '26

Gotcha… seems like it would be annoying to hold long term 😂 no the less… power to you for having fun.

1

u/NathanS116 Sep 21 '26

Oh nah it’s all good I have callussed palms so I don’t feel a thing

1

u/NathanS116 Sep 21 '26

Plus my hands are huge

1

u/GullibleRisk2837 Sep 21 '26

Wtf 15-17hrs??

1

u/NathanS116 Sep 21 '26

Calm down it’s not even that bad

1

u/GullibleRisk2837 Sep 21 '26

Not bad, no, man. But how?

1

u/PerfectWhiteTrash Sep 20 '26

Could always grab a slightly larger drill bit and debur the edges. Might be more comfortable in the hands.

1

u/NathanS116 Sep 20 '26

Good idea!

1

u/SuicideRush Sep 20 '26

I absolutely love this. Definitely just need to sand this and it’ll be perfect.

1

u/NathanS116 Sep 20 '26

Gotcha boss!

1

u/Fritzerbacon Sep 20 '26

I'm getting the urge to golf for some reason.

I love custom jobs, this looks awesome!

1

u/NathanS116 Sep 20 '26

Preciate it dawg

1

u/Aggressive_Ad_2625 Sep 20 '26

Everyone hating but this looks cool as fuck and I have trypophobia

1

u/NathanS116 Sep 21 '26

I think it looks tuff and I’m happy you think so too!

1

u/Altruistic_Gold_9984 Sep 20 '26

I'm no way endorsing this, but if you were searching for a couple more grams, I think you could get it even lighter by changing the housing to a less complex shell, such as the ExtremeRate Luna shell, and drilling it out again

1

u/NathanS116 Sep 21 '26

I’ll look into it

1

u/YungReddd Sep 20 '26

I’m so confused by this. I can’t play on a controller without that heavy weight of the batteries I couldn’t imagine needing to make a controller lighter, doesn’t make sense to me. It’s not a mouse.

1

u/NathanS116 Sep 21 '26

It just helps out for longer sessions plus I wanted to because it seemed fun and it is

1

u/A_Litre_0_Cola Sep 21 '26

You say "low key" and put speed holes in your controller.

One drop of sweat can ruin your controller, and those holes will just gather your hand cheese.

This is one of the dumbest things I've seen today.

2

u/NathanS116 Sep 21 '26

lol so much hate I wash my hands before I play and no not “one drop of sweat will ruin my controller” and check all the other link of controller shaving! There are no rumble motors or haptic trigger systems under those holes and the silicone inputs are not drilled over I appreciate you’re concern or hate or whatever it is but I assure you there is t going to be any hand cheese collection. Nice pun though considering I tried making it look like Swiss cheese 😂

1

u/NathanS116 Sep 21 '26

Also I hope you have a wonderful day man

1

u/Navi_Professor Sep 21 '26

mm yes, this will totally not get crusty and incredibly gross after a few weeks of play with skin and other crap easily getting into the controller now.....

1

u/NathanS116 Sep 21 '26

lol I wash my hands before every session and please if you have any actual suggestions for controller shaving then you can type up a comment 🥹 instead of looking at the negative look towards positives dude

1

u/Navi_Professor Sep 21 '26

Anything I've found with holes like this in it just gets incredibly gross. Whether it's feather mice, skeleton frame keyboards, etc

i work in PC stuff, i used to do repairs, and we'd get mice and keyboards back just caked in stuff, even if they were clean externally. Anything with holes just collects skin like a cheese grater.

You'd be better off printing a thinner shell from a higher-performance material, or thinning the shell from the inside with a Dremel and using something like Styrofoam foam to restore structural integrity to the thinned plastic.

or at the very least, adding some backing with plastic or tape to the holes, just to stop stuff from getting inside the controller

1

u/NathanS116 Sep 21 '26

Dude your cheese references are so peak! And that’s a lot of irrelevant words I’m not gonna read I appreciate the comment tho 😊

1

u/1rkella Sep 21 '26

Washing your hands doesn't make skin cells stick to them better when they encounter friction.

1

u/NathanS116 Sep 21 '26

Me caveman elaborate more

1

u/1rkella Sep 21 '26

Skin bits rub off hand when hand hold thing, get on thing, thing have skin bits on it

1

u/NathanS116 Sep 21 '26

Mmmmm lol thank you for your input but I do ask that you give an actual suggestion towards shaving weight since you’ve proven your intellectual prowess 😂

1

u/1rkella Sep 21 '26

Seeing as you don't seem to have much concern about things getting on it, you could remove the entire shell and just hold on to the bare PCB, that would save a lot of weight!

1

u/NathanS116 Sep 21 '26

I love you this is an awesome idea! Yeah nah but I could do a challenge and play Elden Ring for 48 hours with the bare pcb lol might be onto something🧐

→ More replies (0)

1

u/oli55256 Sep 21 '26

I suggested the holes on your last post and i love how it turned out, did you end up doing a specific hole for finger grip?

1

u/NathanS116 Sep 21 '26

Oh my days oliii

1

u/NathanS116 Sep 21 '26

I’ll hit you up with an update when ever I do that I’m thinking of using some of the parts I took out for a kind of extended hook if you catch what I’m saying

1

u/Lucky_Safe8012 Sep 21 '26

If you get a BDM-060 trim to replace the one you have, you can discard the friction rings and cut out most of the analog socket.

1

u/NathanS116 Sep 21 '26

Smart

1

u/Lucky_Safe8012 Sep 21 '26

Technically, you also don’t need the legs that hold the mid frames between the front and the back shell (where the rumble motor was). The screws that connect the mid frame to the front frame above the motors are probably enough. You can also get rid of the speaker housing.

1

u/NathanS116 Sep 21 '26

Yeah I already don’t use any screws besides the one for the middle so I’ll try that

1

u/Lucky_Safe8012 Sep 21 '26

This is kind of the part that I say cut the grips totally and get a 3 printed part to seal the bottom of where handles were.

1

u/NathanS116 Sep 21 '26

Yeah I know some majors in aerospace so I’ll ask them for a better way to fully slim it down without losing any structure

1

u/Lucky_Safe8012 Sep 21 '26

I see you already did. Good stuff.

1

u/dogsbestfriend77 Sep 21 '26

Does it feel good to hold?

1

u/NathanS116 Sep 21 '26

Sure does

1

u/18Janky18 Sep 21 '26

This looks comfortable to hold but uncomfortable to feel, and that is distracting.

1

u/NathanS116 Sep 21 '26

Haha! Trust me it’s comfy

1

u/Snoekity Sep 21 '26 • Bravo

Thanks, I hate it. But please, don't stop yet.

1

u/NathanS116 Sep 21 '26

Finally I’ve been waiting for someone to say this!

1

u/love2killjoy410 Sep 21 '26

I LIKE IT.

1

u/NathanS116 Sep 21 '26

Awesome!

1

u/love2killjoy410 Sep 22 '26

I will say though, simply stippling the whole controller and going with like a golf ball design would look neater. More uniform. Either way, I really dig it lol.

1

u/404_Name_Was_Taken Sep 21 '26

Cheese controller.

1

u/NathanS116 Sep 21 '26

Sonion I wash my hands before every session it’s fine plus there’s no need to look at the negatives

1

u/404_Name_Was_Taken Sep 21 '26

I was just saying it looked like cheese dawg. 🥺

1

u/NathanS116 Sep 21 '26

Oh my apologies I’ve been having some chuds saying it will collect hand cheese or whatever so on that note. Good one!

1

u/404_Name_Was_Taken Sep 21 '26

Nah, I think it looks pretty sick tbh. Only part that bothers me is the two holes that intersect on the left handle. Shame your getting shit for doing stuff to your own controller.

If this were an anniversary edition controller I'd have to kill you though.

1

u/NathanS116 Sep 21 '26

No I would never do that unless it’s incredibly enticing but it’d have to be incredible. And the two holes I lowk can’t defend I was listening to we the kings and bopped my head too much

1

u/TrayLaTrash Sep 21 '26

Hurts my hands to look at.

1

u/NathanS116 Sep 21 '26

lol it’s actually pretty comfy

1

u/TrayLaTrash Sep 21 '26

I would needs fans in there for handsweat with added stress of all the edges my tight grip squeezes against.

1

u/NathanS116 Sep 21 '26

Yeah if you want I can start working on a way you can connect the haptic trigger system to blow a mini fan

1

u/tinkool-time Sep 21 '26

-corrosion entered the chat-

1

u/NathanS116 Sep 21 '26

lol what?

1

u/lazardus Sep 21 '26

Trypophobia has entered the chat..

1

u/Hamhockthegizzard Sep 21 '26

This is a nightmare, for me personally, but I am curious how it feels. Just never wanna look at it lmfao

1

u/NathanS116 Sep 21 '26

I mean I don’t really feel it my hands are big so it’s mostly my palm and the part that my palm makes contact is callused so I don’t feel anything 👍😁

1

u/benno4461 Sep 21 '26

Oh I fucking hate that. Boo this person.

1

u/NathanS116 Sep 21 '26

What’d I do?😂😭 this is a sub for custom controllers

1

u/EternalLatias Sep 21 '26

This controller gives me anxiety.

1

u/NathanS116 Sep 21 '26

Yoo my bad lol is it tuff tho?

1

u/DingusKing Sep 21 '26

You did the circle design cause you’re lazy lol

1

u/NathanS116 Sep 21 '26

lol yeah but go check out oli in pt.1 he was talm bout sum like this

1

u/cesar0900 Sep 21 '26

Paint it yellow it’ll be a SpongeBob custom

1

u/NathanS116 Sep 21 '26

I like where you’re heading

1

u/Lower_Bonus6127 Sep 21 '26

What the fuck is the point in this horrible creation

1

u/NathanS116 Sep 21 '26

lol there’s not much point in anything if you think of it that way but I think it’s pretty tuff and if you wanna see more reason check all the other parts that are connected to this

1

u/MakinBones Sep 21 '26

Atleast sand them, you psycho.

1

u/NathanS116 Sep 21 '26

Yo chill gng you’re not supposed to point that out 🤫

1

u/MakinBones Sep 21 '26

I think after sanding they might be comfortable.

1

u/NathanS116 Sep 21 '26

Yeah it’s late for me tho I’ll hit up an update tomorrow gng I’ve got college work

1

u/[deleted] Sep 21 '26

Update us when theres a spider nest in there

1

u/NathanS116 Sep 21 '26

lol I gotchu might hit yall up on Halloween

1

u/Charon711 Sep 21 '26

Please at least debur the edges and sand it with a fine grit. 😭

1

u/NathanS116 Sep 21 '26

I will dawg I gotchu lol

1

u/LilguyMCBE1 Sep 21 '26

Swiss cheese looking ass controller

1

u/NathanS116 Sep 21 '26

Yeah if you go look at the comments on pt3 oli and some others suggested it lol

1

u/OMG_ZILLA Sep 20 '26

Good work! What's the before and after weight?

2

u/NathanS116 Sep 20 '26

It was at 9.87 and I’ve shaved off some more weight and I’ve also used a lighter frame from an older DS5 model so the weight is now 9.87-4.76=5.11 oz

1

u/OMG_ZILLA Sep 20 '26

That's an incredible saving! Hope it's comfortable to play now.

1

u/NathanS116 Sep 20 '26

Oh yeah sure is!

0

u/[deleted] Sep 21 '26

[deleted]

1

u/NathanS116 Sep 21 '26

Wouldn’t be that difficult to clean and I wash my hands before each session