Alright crafters, the results are in! There’s a TL;DR at the end of this post, but we did want to explain how we got here and the choices we’ve made along the way, too. As a quick recap, the mod team noticed a pattern of off-topic conversations and uncivil conversations whenever someone posted crafts related to Harry Potter, and members of the community raised concerns about allowing such content in the subreddit. It was compared to hate speech, due to JK Rowling’s increasingly vocal bigotry and use of her political, economic, and social platforms to further that agenda, as documented here and here. We knew there would be no perfect solution to this problem, and that anything we did would leave some people feeling hurt and upset. But we felt it was important to address the issue, so we asked the community a little bit ago in this post about what they think we should do, and we discussed it as a team as well.
While some commenters opposed the idea of banning it, those discussions were largely centered around concerns about whether it would lead to more censorship. In our experience, posts about other “problematic” topics and IP do not lead to the same level of off-topic conversations and arguments that Harry Potter posts have. Additionally, Rowling is causing a significant amount of concrete and widespread harm towards entire marginalized communities, and as members and supporters of those communities, we felt that removing her influence from this subreddit should still be on the table. So, we created a poll to get simple, concrete feedback on one question: To ban, or not to ban? We limited voting to accounts that were at least 60 days old, and had at least 50 Reddit karma and 10 community karma, in order to keep it to community members and try to avoid brigading for either side. So, here are the results:
As we can see, it wasn’t a complete landslide in either direction, and those who voted definitely tended towards strong feelings on the topic! After gathering 1,232 total votes, 53% of those who voted in the poll are in favor of banning posts related to Rowling and Harry Potter, while 41% of voters are against banning it. Our intention with this post was to gather feedback on the community’s feelings, because comment sections alone aren’t always representative of a full community, and we wanted to give those who aren’t comfortable commenting or aren’t well-spoken a chance to speak their minds. And it seems like the results are pretty clear! While there’s a decent number of people who don’t support Harry Potter posts being banned, the majority certainly does seem to support this ban - as do the members of the mod team.
So, what does this mean for the subreddit? Well, crafts that are directly related to Harry Potter can no longer be posted here. If your craft isn’t obviously Harry Potter, and you don’t reference it at all, you can still post it - for example, a red-and-gold scarf is perfectly welcome, so long as you don’t describe it as a Gryffindor scarf. Wands are fine, even if they’re similar in style, so long as they aren’t explicitly “inspired by Harry Potter.” But a papercrafted Hogwarts, or a replica of a specific character’s wand? Not allowed. We are currently working on updating the wiki in general, and will add a page about this ban in the wiki, including informational resources like the ones posted above and guidelines on what is and isn’t allowed. But generally speaking, any identifiable reference to Harry Potter is going to be a no-go, and moderator discretion will be the ultimate decider on what is and isn’t considered “Harry Potter-related.”
This also doesn’t mean we’re planning to start banning all kinds of IP and inspirations - as stated earlier, we found that Harry Potter posts generated far more issues and conflict than any other IP, and no other IP has been raised as a concern to the same degree. We talked about it, and while we all have companies or creators that we as individuals don’t love to see discussed in the subreddit, no other topic has been so universally controversial and caused so many problems from a purely logistical moderation standpoint. If, in the future, another similar issue does arise, we will handle that as it happens. We may not ask for feedback in the same way, because to tell the truth it stretched the issue out and caused more stress than we meant it to. But for right now, no other topic seems to be causing so many problems both within and outside of the subreddit, so we have no current plans to ban anything else.
Comments on this post are locked, as we don’t want to encourage debate about this topic. We had plenty of that in the original feedback post, and at this point we’ve made our decision. However, if you would like to clarify any aspect of this new rule, or you still have questions about why we chose to do this, please feel free to reach out via modmail! Please also note that we’ve had a couple of mods leave recently, bringing the team down to just four of us. While we are adding new members to the team soon, it’ll likely take us a bit to work out all the kinks with this new rule, as it does with any change to the subreddit! Please be patient with us in the meantime, and remember that the mods are people too, and we are all dealing with our own issues and responsibilities irl.
TL;DR After a community vote, and much discussion from the mods, posts and discussion about Harry Potter and JK Rowling are no longer allowed in the subreddit, and will be removed going forward.
And after painting, I realized something about it looked a little busty… so I went back and got another one to paint a titmas tree for my bathroom (not fully done).
I got inspired when I browsed Pinterest for stitching ideas and came across bead stitching. I absolutely love how this turned out! 10/10 will do this again. It's also a great way to make use of old shirts I don't wear anymore, by using them as a base.
My library has yarn club every Wednesday. I’ve never been able to go cause my kids are at that age where I’m momming hardcore 24/7 😂 when they started the club they set up this neat little fabric basket with free to take things in it. Yarn, cross stitch kits, etc.
Last week I grabbed a couple cross stitch kits, well I grabbed one and my son begged me for the other (without informing me until later that it was partially done lmao so I’m actually not sure how I’m gonna finish that one but ok) and I was so excited because I’ve never done cross stitch before and I’ve always wanted to learn.
I started one a couple days ago and aside from the fact the kit was actually supposed to include every color and was missing one so I had to go buy it, it’s been going well. Really well. I’ve really been enjoying it. My husband says I keep adding more old lady activities to my list of hobbies 😂 I love to crochet, knit, do puzzles and diamond paintings and read as well. I’m 31 but I love my old lady activities darn it 😂
So today I was chatting with my four year old when all the sudden I GENTLY pulled on my needle to pull a stitch through and my needle SNAPPED in half. I kinda stared at it for a sec and my son goes “Daaaaang. Bruh. You didn’t even pull it hard.“ tossed the needle and grabbed the one that came with the partially finished kit because it was the exact same. About an hour later, I messed a stitch up a little and I was popping it back through to undo it and the. Same. Thing. Happened. I didn’t even get it halfway through and it just… snapped.
I wasn’t even the tiniest bit rough with anything, so I wonder if it was a quality issue? Cheap needles maybe? Or is there something I’m unknowingly doing wrong during the process that caused it to happen?
I searched through all of the crochet related needles I have and only had ONE that was close to the same size but it isn’t the right type of needle at all and I am not liking using it, but it’ll have to do until I can get to the hardware store in the morning. (bless my husbands heart, we haven’t left the house much cause my daughter has pneumonia for the second time and he only goes to work and home so we don’t bring something else home to her, but he’s gonna stay up late for me and not go to bed when he gets off in the morning just so I can go get a new needle lol) what type and size of needle should I be looking for? Both ones I have are 14 count Aida. I have read so much about different types of needles for cross stitch and i THINK I need a tapestry needle? but what size exactly and is there a brand that’s above all others I should be aiming for? And should I grab MULTIPLE just in case lmao
Since the second one broke I’ve barely touched it tonight and all I wanna do is continue it but the needle I’m using is annoying 😅😅 ugh.
I’m making a mushroom (and giant strawberry prop) for my son’s first birthday. I’ve come really far but the tutorial I’m following doesn’t seem to work right. I thought I would use cotton wool to cover this but I’ve just not realized I do not have the patience. His birthday is also Saturday so I don’t even have the time lol. Please advise. I need to cover and paint
I love having an Oscars party! Love movies, love predictions. It’s my Super Bowl.
We always have a winner each year whoever gets the most correct. At first it was a chicken trophy. Then a mini Oscar…My husband thought up the idea that each year you should be able to win a new Oscar - and each year it’s a real race to win the prize. Imagine having a few Oscar’s casually on your shelf - bragging rights for having won several years of Oscar parties.
I had two statues 3D printed to 1:1 scale. Then, after research and planning, I sanded down, primed, painted, found the most metallic finish I could use. Also added a metal plate to the base to increase its weight, and felted/ gold stamped the bottom with the current year. Proud of myself - especially never having done this before.
I am doing a trade thing in r/artisttradingcards . So if you're given supplies to make something, would you rather have thematic supplies or absolutely random things?
I wanted to make a heartfelt gift for my sisters featuring their beloved pets (some of whom have sadly passed away).
I shaped the circles out of air-dry clay, used paper napkin decoupage for the vintage porcelain-like border, glued gold-flecked linen on the back, and finished them with jute twine and wooden beads !
Recently tried making a linocut stamp and made this for my wall. Im hoping to use this and some spider lilies to imitate wallpaper almost. I may post pics of that when its done 😊 I will post my inspo pic i found on google in the comments!
I saw a figurine that I thought looked like Strawberry Shortcake, so I took it home to repaint it. I included the original figurine for comparison, and a side by side of the primed figurine next to a Strawberry Shortcake figurine I already own.
Also, I only had black, white, blue, yellow and red paint. That means I had to do so much mixing to get these colors. But, I think the entire piece is more unified because of it.
Hello! My 3 year old daughter (that's her hand) got a Bobble It! Barbie keyring kit yesterday and I was curious about the material itself and it's uses in my own modelling and crafting projects.
Does this type of material have a generic name? It feels similar to foam clay but obviously has tiny polystyrene balls suspended in it, and the medium is translucent.
Since the instructions say you can reactivate with water, I'm assuming the medium is acrylic based and as a result it should be sealable/printable with foam safe acrylic paints and sealers?