r/chipdesign • • 4h ago

What is EcrioniX?

0 Upvotes

Looked up a browser compiler for SystemVerilog expecting EDA playground and found EcrioniX instead. I checked it out and it seemed really cool, with a lot of resources and tools, but when I looked it up online there was barely any info outside the org?

Wanted to see if there where any negative opinions, before starting a group project (counter & UART) with some friends on it.


r/chipdesign • • 8h ago

Anyone know anything about Alpaca Research? ASIC PD new grad role

5 Upvotes

I came across an ASIC Physical Design Engineer (new grad) opening at Alpaca Research in Cambridge, MA. They describe themselves as building a vertically integrated platform that runs large AI models locally on custom hardware and software.


r/chipdesign • • 9h ago

Tenstorrent Hardware roles

9 Upvotes

I heard from a friend that Tenstorrent tests extensive C++ for hardware roles like Design Verification.

Is that true? Why so deep for DV roles though? I can understand if its pure software or even embedded/firmware roles.

But in general, how important is coding for RTL Design. DV, Formal verif roles? I have interviews lined up with Apple and the minimum qualifications include Python proficiency in numpy, pandas, scikit etc. This looks more of data science for a DV Engineer.


r/chipdesign • • 9h ago

Pelgrom's or Razavi's new book for studying ADCs?

4 Upvotes

Or suggest any other books


r/chipdesign • • 14h ago

Any one know about short length rule in layout design

0 Upvotes

r/chipdesign • • 20h ago

Searching for interns and potential co founders (only come if ur willing to take a bet on the future of chip design)

0 Upvotes

Building a semiconductor startup. Skills doesn't matter just obsession with loyalty is needed. Do it as ur side hustle until you trust on me and the startup and then give ur all into this


r/chipdesign • • 20h ago

Nxp analog circuit engineering intern

8 Upvotes

Hi everyone

I will be joining nxp as an analog circuit engineering intern next year January 2027, most probably in noida or Bangalore campus,

Any suggestions on technical skill that i should get familiar with.

I am a master's student in India.

Also can you tell if this role is design oriented or it also has an ams verification component to it.


r/chipdesign • • 21h ago

Review this roadmap. I am seeking advice .

3 Upvotes

Hey everyone,

I am currently a student pursuing a multidisciplinary engineering degree (I know this is uncommon globally, but you can see my core curriculum here: https://ept.tn/common-core). I am only in my first semester, but after finishing my degree in 3 years, I want to pursue a Master's in chip design.

My goal right now is to build a strong CV to improve my chances of getting a scholarship at a good university. I used Gemini to help me generate a self-study roadmap . I want to hear your critiques about it .

I know the estimated time frames given by the AI probably aren't accurate, so don't focus too heavily on that. I am mainly looking for advice on the content itself.

I am only using Coursera because I can't afford buying each course individually and a Coursera plus subscription will help me reduce the expenses especially in vacation when I can study more .

I'm just a beginner here and more than willing to hear your advice and critiques. Thanks in advance.


r/chipdesign • • 23h ago

Meta ASIC Design Interview Preparation Tips

9 Upvotes

4+ YOE. I have received a call from recruiter to prepare for a Physical Design Implementation and signoff based role. I have been working mostly on block-level from netlist to GDS which involves PNR, STA, PDV, IR, Signoff.

Since this role feels more of a CAD/Infra based role what additional knowledge/skills can improve my chances of getting hired? My coding are not that good but can write simple proc and functions to get job done be it for PNR, STA or sometimes in sIgnoff. The coding skills actually went downhill since usage of AI; will that matter a lot in these kind of roles?


r/chipdesign • • 1d ago

Meta Silicon Validation Engineer interview, what to prepare?

0 Upvotes

Hi everyone, I have a first-round interview coming up for a Silicon Validation Engineer, Infrastructure role at Meta. The recruiter mentioned some C coding, debugging questions, and discussion of my experience.

Has anyone interviewed for this or a similar role? What topics would you recommend focusing on, and what level of C coding should I expect? Any useful resources or preparation advice would be appreciated.

Thanks


r/chipdesign • • 1d ago

IBM Entry Level Hardware Developer in Austin

3 Upvotes

Hi everyone, I just received a new grad BS offer for the Entry Level Hardware Developer(DV) role at IBM in Austin and would appreciate some feedback from folks familiar with IBM hardware or the Austin market.

For those who work in IBM and in Design Verification, what do you guys think of starting my career as a chip designer here? How is the work culture and environment in Austin? Pay is Band 6 and in the lower end of six figures.

From what I know IBM verification is a bit different from industry in their verification using their own tooling/methods. I am hoping this may set me up for good DV experience/Design given that its not traditional SystemVerilog/UVM. Also how realistic would a pivot internally be from DV to RTL?

Thanks!


r/chipdesign • • 1d ago

Has anyone worked on a die-to-die link, especially the phase interpolator (PI)?

1 Upvotes

Hi everyone!
I’m a final-year Electronics and Communications Engineering student working on a high-speed die-to-die transceiver for my graduation project.

My part focuses on the phase interpolator (PI).

Has anyone here worked on a similar project, either academically or in industry? I’d love to hear how you approached choosing a PI topology, defining its specifications, and evaluating its performance.

Any recommended papers, practical design tips, or advice on common pitfalls would be really helpful.

I’ve been reading papers, but I’d appreciate hearing from people with hands-on experience.

Thanks!


r/chipdesign • • 1d ago

Need Resources for designing a 2nd order BGR!!

1 Upvotes

So I've recently learned designing a BGR (different variants) with a startup ckt but I got to know more concepts like Resistor Trimming ,Temperature Compensation, Second order BGR etc I want to learn deeply into this can anyone provide best and multiple resources for the same.


r/chipdesign • • 1d ago

AI Bubble: Should I delay a Masters because of it?

38 Upvotes

I'm planning to apply for a master's this cycle, with a focus on computer architecture and chip design. I really enjoy learning about these domains and want to gain more design/architecture expertise.

However, recently I've been thinking about whether there is an AI bubble, and what it means for the semiconductor industry when it pops. Is it likely that in 2 years, when I graduate, there will be minimal/no jobs for fresh grads because of reduced chip demand? Should I delay doing my master's because of this?

Additionally, AI tools are getting better and better to the point where fewer engineers may be needed (at my current job, I myself spent a while developing a tool that drastically cuts debug times lol). I have a year of experience in verification/validation at a major semiconductor company, so I guess I have that slight thing going for me.

People in the industry, or anyone familiar with this topic, thoughts?


r/chipdesign • • 1d ago

Cadence average compensation for T2 grade?

0 Upvotes

Hi,

I wanted to know the compensation Cadence provides for T2 grade roles in DV. Does anyone have any idea of base salary for a new T2 grade hire?

Also, does Cadence provide RSUs to T2 hire? If yes, how much can one expect if they had no RSUs in the previous company?


r/chipdesign • • 1d ago

how to upskill and switch? 4 YOE in Standard Cell QA/Release, stuck in wrapper flows

7 Upvotes

Hi everyone,

Working in Foundation IP / Standard Cell Library QA and Release at an EDA/IP product company. Looking for some honest advice from folks in characterization, PD, or CAD roles.

I feel pretty saturated in my current job. Since day one, most of my work has been running internal wrapper scripts, tweaking config files, and handling release checklists. On paper my resume has good keywords (Liberty validation, Redhawk APL, DRC/LVS, advanced nodes), but technically I feel out of touch because the internal automation hides all the actual tool execution and debugging.

Planning to prep for the next 3-4 months and switch to a more core role - like Standard Cell Characterization, Power/EMIR, CAD automation, or maybe STA/PD if that's realistic at 4 YOE.

Wanted to ask people who take interviews or have made a similar jump:

  1. What core fundamentals do interviewers expect someone with 4 YOE in library validation to know properly beyond flow checklists?

  2. Which switch makes the most sense right now - staying in Foundation IP (characterization / power modeling / CAD) or trying to move towards STA/PD?

  3. Since I can't bypass internal wrappers at work, what's the best way to prep over the next 3 months? (Thinking of practicing on OpenSTA and writing standalone Python/TCL parsers from scratch).

Any blunt tips would really help. Thanks!


r/chipdesign • • 1d ago

Career Transition: Trying to make a move from Analog EDA/CAD to Mixed-Signal DV

6 Upvotes

It's exactly as the title says, I am moving from a CAD role to a DV role within the same company. Currently in talks with my manager to process my transfer quicker, but every meeting with him he simply asks me to stay back and has the following points:

  1. DV is not "sexy" -> exact words, i personally am not aroused by CAD either

  2. The AI Elephant -> DV will become automated

  3. The freedom to work and impact i can create from CAD in a big organization is unparalleled.

My only reason for moving to DV are that I wish to work on design execution roles and actual electronic products than figure out which options and buttons to click for better results. Really looking for some advice from some of the folks here who work in the industry.


r/chipdesign • • 2d ago

Designing an AXI4-Lite to APB4 bridge — how much should I account for potentially uncooperative AXI managers?

7 Upvotes

I'm a about-to-be-a-Computer Engineering-graduate working on an AXI4-Lite to APB4 bridge as a personal RTL design and verification project.

I've implemented much of the basic architecture, including independent AW/W/AR buffering, read/write arbitration, an APB dispatch queue, and separate AXI response FIFOs. I'm now working on timeout handling and recovery when an APB peripheral fails to assert PREADY.

This has led me down a rabbit hole of trying to account for every possible behaviour of the upstream AXI manager.

For example, suppose an APB transaction times out. My bridge returns SLVERR and enters a fault-containment state, preventing further APB transactions. However, there may still be AXI requests that the bridge accepted before the timeout.

Two scenarios are giving me particular trouble:

  1. Partially accepted writes: The bridge has accepted AW but not W (or vice versa). If the manager never supplies the missing half, how should the bridge handle this during recovery? It cannot generate BVALID until both handshakes have occurred.

  2. Response backpressure: The bridge generates SLVERR responses for previously accepted transactions, but the manager never asserts BREADY or RREADY. The bridge can hold the responses indefinitely, but with finite buffering, it cannot necessarily finish draining every outstanding request.

I understand that AXI permits arbitrary delays in these handshakes, and that my bridge must remain protocol-compliant regardless. But I'm struggling with where to draw the line between what the hardware must guarantee and what can reasonably be treated as an assumption about the surrounding system.

In an actual industry RTL design, how would engineers approach this?

  • Is it acceptable to explicitly specify liveness assumptions, such as the manager eventually supplying both halves of an accepted write and eventually accepting outstanding responses?

  • Would these assumptions normally be documented as integration requirements or formal verification assumptions?

  • How would you design a timeout-recovery mechanism when complete cleanup might depend on upstream behaviour outside the bridge's control?

  • At what point does accounting for every possible corner case become unnecessary overengineering?

I'm trying to make this a realistic, defensible design rather than just something that works under ideal conditions.

I WANT TO LEARN TO THINK LIKE AN ENGINEER (I have had no co-op/work experience, so I have had to learn to think for myself in regards to situations like this)


r/chipdesign • • 2d ago

Analog IC design internship at Texas Instruments—MS/PhD

2 Upvotes

Hello,

I want your guidance about my interview in TI next week in the US.
Please share questions, topics, and any guidelines for me.

Thanks in advanced.


r/chipdesign • • 2d ago

OCI clocking scheme

1 Upvotes

The OCI-MSA recently released a spec. https://oci-msa.org/assets/files/200G-OCI-Optical-Phy-Specification-v1.0.pdf Anyone who worked on the optical interface, do you know of references for the clocking scheme that was used? I am trying to do an architectural study.


r/chipdesign • • 2d ago

Are Engineers Born or Made?

0 Upvotes

Folks, I have always been curious about how certain countries, particularly in Europe, America and parts of Asia, have developed such incredible engineering capabilities, from designing aircraft like Boeing and Airbus to manufacturing sophisticated semiconductors. Coming from Africa, where much of this technology is imported, I often wonder how we got here and, more importantly, what it takes to get there.

My curiosity became even more personal about four years ago when my employer established an R&D centre. Until then, I genuinely thought electronic hardware design was something reserved for exceptionally gifted individuals, almost geniuses. Today, thanks to YouTube, Udemy and people generously sharing their knowledge, I have designed PCBs, developed firmware and tested boards that actually work! The feeling is incredible.

It has made me wonder: had these resources not existed, would I ever have discovered that I was capable of doing these things?

So, to those working in semiconductor design, IC fabrication, electronics, automotive engineering and other advanced fields: were you naturally gifted in mathematics, physics and engineering from an early age? Or was yours an ordinary journey of studying, graduating, joining the industry, learning from others and gradually developing the expertise to design these sophisticated products?

How does one transition from classroom theory to actually creating such technology? What does it take beyond academic qualifications? I ask because, growing up and studying engineering in Africa, exposure to these industries and possibilities is often limited. I ask out of genuine curiosity and admiration. I would love to hear your journeys. Perhaps knowing how you got there will help others believe they can too.

Edit: Original post was too long, I had to cut it down from about 710 words to roughly 250 words...


r/chipdesign • • 2d ago

AMD CPU Design intern screen interview

3 Upvotes

Has anyone had a 15-minute recruiter interview for a AMD CPU Design Internship? What should I expect? Is it behavioural or technical?


r/chipdesign • • 2d ago

What made you choose analog IC design? Was there a moment that made it click?

23 Upvotes

Hi everyone!

I'm currently a senior EE student exploring different career paths in IC design. I've worked on a few analog circuit projects, including LDOs and buck converters, but I'm still figuring out what direction I want to pursue in the long run.

That got me wondering about how other people found their way into analog design.

What made you choose analog IC design over other fields?

Was there a particular class, project, professor, or experience that made you think, "This is what I want to do"?

Or was it something you gradually developed an interest in over time?

I'm especially curious whether there was a specific moment when things just clicked for you, or whether you only realized you loved analog design after spending years working in the field.

I'd really love to hear your stories, especially from people who've been working in analog IC design for a while.

Thanks for sharing!


r/chipdesign • • 2d ago

How can I start programming an ARM processor completely from scratch?

11 Upvotes

I've recently watched two very interesting things on youtube:

They helped me understand how an early-stage computer works, including registers, ALU, buses, instruction execution and control logic.

Now I'm curious about taking this further. I want to experiment with programming an ARM processor without relying on existing IDEs or vendor tools. I'd like to build my own basic toolchain, starting with an assembler and eventually understanding the entire process from writing assembly to executing it on actual hardware.

I'm not sure how practical this approach is, but I'm doing it purely for the learning experience.

Where should I start, and are there any resources or projects that can help me explore this?