r/chefknives • • Sep 11 '21

Discussion Why German knives are better than Japanese knives

0 Upvotes

Why German knives are better than Japanese knives

First off, let me start this by saying everyone has their own opinions and these are my own. I have owned and used both knives over the years and this has been my experiences. Please let me know if you have any differing opinions and would like to have a (civil) discussion.

  1. Sharpening & maintenance

It is easier to sharpen German knives than Japanese ones. One of these reasons is because of rockwell hardness. Japanese knives are typically much harder than German ones and require much more skill and know-how to sharpen them effectively. This can involve different stages of whetstone grits, while German knives can be effectively sharpened easier with only one stone, and honed with a sharpening steel. Japanese knives are typically recommended to not use a steel, but rather a ceramic rod, which removes much more material and sharpens the edge, rather than a normal steel which only seeks to re-align the edge.

German knives also require far less maintenance as they are much more durable. Due to factors like full tangs, thicker blades, and lower rockwell hardness, German knives will last much longer and can survive accidental falls, while Japanese knives are much more brittle and can be prone to chipping, or even upright snapping. German knives can also be used to go through smaller bones while Japanese knives should be avoided from going anywhere near bone. Japanese knives require the user to treat them more delicately and cut with much more care, whereas with German knives you can go at it and not have to worry so much.

2. Cost

While Japanese knives can easily go several hundred dollars, even into the thousands, German knives are much more accessible to the average cook. A German knife forged in Solingen, Germany can cost only $80-100, while brands like Mercer offer even cheaper options that use the same exact steel used in Wusthof (x50 Cr Mo V15 steel) at only 30 bucks. While premium options such as Solingen knives made with wood handles can go into the $200-range, the highest quality German knives can be had within the $100-150 range, leaving you with room to spend on a whetstone or any other kitchen accessory. Japanese knives on the other hand are not unusual to be priced at several hundred dollars. On top of that, should you get a chip or a break in the knife at some point, you will have to spend money getting it professionally repaired/restored if you are not skilled enough with restoration whetstones on your own.

3. Rock chop

German knives are objectively much better if you like a rock-chop technique to cut foods with because of the curved edge from heel to tip, whereas Japanese knives have straighter blades and will typically be used for push-cuts or normal chops.

4. Bolsters and Weight

If you like full bolsters, German knives are your best option. The top brands have many options in this regard from full bolsters, to half/demi-bolsters, and other variations. Japanese knives will typically have one styling of bolster.

German knives have a higher variety of weight, with the option to buy one that is extremely heavy, or extremely light. For example, a Messermeister Meridian Elite chef knife weighs around 400 grams, while a Wusthof crafter chef knife weighs around 270 grams. German knives, known for being more robust, definitely have much heavier options if you prefer a lot of weight behind your knife.

5. Guests!

If you have some guests over or are cooking with family, it is better to let them use your German knives rather than to give them a Japanese one, which requires more care, knife skills, and general prep knowledge. The German knife will be used by them without you having to worry about them accidentally chipping it or doing little things with it that are normally no-goโ€™s on brittle Japanese blades.

CONCLUSION

These are my reasons for preferring German knives over Japanese ones. That being said, if you are skilled and willing to pay more money, Japanese knives are much better for making precision cuts. For example, sushi! However for the standard chef, German knives are going to be more cost-effective and suit you better in a kitchen.

Again, these are just my opinions, which I try to back up with some sort of reasoning or source. Let me know what your experiences are and if thereโ€™s any rebuttal youโ€™d like to give.


r/chefknives • • Apr 23 '22

Cutting video Gold knife works fine

1 Upvotes

r/chefknives • • Sep 04 '22

Review Dicing tomatoes

1 Upvotes

r/chefknives • • Jan 31 '22

Cutting video Mazaki Nakiri, quick progression

3 Upvotes

r/chefknives • • Aug 17 '23

Hi everyone can you tell me if this is rust or patina?

Post image
26 Upvotes

r/chefknives • • Nov 28 '22

Discussion Admins here suck know nothing about Japanese knives

0 Upvotes

Admins here look like asscheeks and smell like toilet


r/chefknives • • Nov 15 '23

A good set of knives for the home kitchen for an average home cook. Nothing fancy just something thats durable and can be thrown in dishwasher and stays sharp. Mine go blunt really fast.

0 Upvotes

r/chefknives • • Aug 20 '21

Discussion My problem with this subs definition of a workhorse.

0 Upvotes

Workhorse: a person or machine that dependably performs hard work over a long period of time.

A commuter vehicle, an office laptop, an old wrench that's lasted forever. Those are workhorses. They aren't the prettiest, most expensive things you own but they're not cheap crap either.

Calling only knives with a certain grind, weight and thickness a workhorse is stupid, confusing and useless.

Tell anyone in the restaurant industry that their tojiro dp isn't a workhorse because it's thin and light and you'll get laughed out of the kitchen. The old (and real) definition of a workhorse knife is a dependable knife that sees a lot of use. This was popular on knife forums up until about ten years ago when they became saturated with beginner enthusiasts.

It's also given "lasers" a bad reputation as delicate knives that should only be used in special circumstances. This is far from the truth. I've worked in the food industry for almost a decade. My go-to knife is a laser. I consider my laser to be a workhorse knife.

A workhorse IS NOT a thick and heavy knife. It's not a beater either. It's somewhere between a beater and an expensive knife that gets used once a year that spends the rest of it's time stuck to a $300 live edge wooden mag strip.


r/chefknives • • Jul 23 '22

Cutting video Decided to "renovate" my mum's dangerously unsharp Blok knife

3 Upvotes

r/chefknives • • Sep 04 '23

The finest knives from Japan ever!

Thumbnail
youtu.be
2 Upvotes

r/chefknives • • Jun 01 '20

Warning: Gore I heard there was a blood sacrifice going on? NSFW

Post image
5 Upvotes

r/chefknives • • Nov 24 '22

Cutting video (Update) *Much* less awkwardly dicing an onion with my Victorinox 8" Chef's Knife

12 Upvotes

r/chefknives • • Nov 07 '21

Discussion Please stop calling it a "carrot sookie"

0 Upvotes

The pronunciation is closer to kee ritz kay.

You don't need to make the "u" sound after "s".

https://forvo.com/word/kiritsuke/


r/chefknives • • Dec 16 '23

Avoid Milk Street knives

0 Upvotes

r/chefknives • • Apr 06 '22

Cutting video shun blonde at it again vs chicken breast. come drop me off some energy drinks guy's. Frazier farms la mesa in San Diego. a new knife or anything . just ask for Jesus I'm the kitchen department ๐Ÿ‘จโ€๐Ÿณ๐Ÿ˜Š๐Ÿ˜Š๐Ÿ™๐Ÿผ

19 Upvotes

r/chefknives • • May 03 '22

Knife Gore The best way to use a SHUN knife. I've learned the errors of my ways, guys. Thank you r/chefknives for showing me the light.

0 Upvotes

r/chefknives • • Apr 06 '22

Cutting video so proud to finally get my Blondie ๐Ÿ˜Š๐Ÿ™๐Ÿผ๐Ÿ‘จโ€๐Ÿณ

27 Upvotes

r/chefknives • • Oct 20 '20

Cutting video Maybe the most unsatisfying thing ive ever watched NSFW

1 Upvotes

r/chefknives • • Aug 31 '21

Cutting video Someone bent their knife smashing garlic. I offer a way to avoid that problem

215 Upvotes

r/chefknives • • Jan 31 '23

Recommend me I want this. Japanese steel, blue steel preferably, but will take recommendations. I got like 250$

Post image
0 Upvotes

r/chefknives • • Nov 21 '19

Dalstrong Crusader Series. My go to in the kitchen.

Post image
2 Upvotes

r/chefknives • • Jun 14 '25

Plastic chopping boards is a Big NO for Japanese knives right? But, are there exception/s?

0 Upvotes

r/chefknives • • Dec 31 '22

Question What are these marks on my knife? Are they any cause for concern? (Details in post)

Thumbnail
gallery
0 Upvotes

My brother is home for Christmas and has been using my knife. He didnโ€™t clean it well this morning and when I cleaned it I noticed these marks. I donโ€™t know if they just appeared but I inspect my knife a lot and donโ€™t recall seeing them before. There is a mark on both sides of the knife in relatively the same spot. It is the spot where he left food on it, so I think it could have something to do with that. Side 1 looks like a darker colored streak, but side 2 looks more like a scratch. Am I worrying over nothing? This is my first expensive, good quality knife so I want to take care of it well.

The knife is a Misen utility knife if anyone would like to know. And Iโ€™ve had it for less than a year.


r/chefknives • • Dec 19 '20

Knife Pics Folded Steel, figured someone should try them.

Thumbnail
gallery
1 Upvotes