r/checkpoint • • May 08 '26

Feature Request...

Post image
36 Upvotes

r/checkpoint • • May 27 '19

New Firewalls Have Arrived

Post image
28 Upvotes

r/checkpoint • • Aug 13 '26 Bravo

HTTPS Inspection is not “just decryption” — and that misunderstanding causes a lot of production issues.

23 Upvotes

In Check Point, HTTPS Inspection is really a TLS enforcement pipeline. The gateway evaluates policy, decides whether to inspect or bypass, validates certificates, establishes two TLS sessions, decrypts the traffic, exposes the clear-text content to supported blades, applies policy, and then re-encrypts it before forwarding. That is why real-world failures are usually not about “decryption” itself, but about CA trust, certificate pinning, OCSP/CRL, bypass order, TLS compatibility, performance, privacy exceptions, and application behavior.

This is also why HTTPS Inspection should never be deployed as Inspect Any → Any. A mature design starts with explicit bypasses for sensitive or fragile traffic, then expands inspection gradually to high-risk users and categories, while monitoring inspect/bypass ratios, TLS failures, CPU impact, and exceptions. In R82, capabilities such as Gradual & Smart Deployment, Network Learning, Performance Prediction, Bypass Under Load, and SmartView monitoring make this much more operationally manageable.
The practical takeaway: the best HTTPS Inspection deployment is not the one that decrypts the most traffic. It is the one that decrypts the right traffic, bypasses the right traffic, and keeps those decisions measurable and governed. I would use the image above right after the first paragraph, because it visually explains the two TLS sessions and the inspection path before the post goes into policy and operational considerations.

Question for the community: do you deploy HTTPS Inspection in phases, or do you still see environments trying to enable it broadly on day one?

The full technical article is available on CheckMates.
Link in the first comment.


r/checkpoint • • Mar 02 '26

Massive VPN bug - has taken all my customers VPNs down.

21 Upvotes

If your experiencing VPN instability it could be be related to the new bug for certificate checking in the management environment.

There is now a SK on this (posted below incase you have not seen/received it.

Since March 1, 2026, we have been experiencing an issue with certificate/CRL validation on R82 and R82.10 (all Jumbos) across:

Security Gateways and Management

Maestro Orchestrator

Quantum Spark

CloudGuard Network Security

This issue appears in multiple scenarios, including (but not limited to):

Remote Access VPN, Site-to-Site VPN, Threat Prevention updates, CloudGuard auto-scaling (VMSS), and New Gateway and virtual system deployment.

An SK has been published:sk184766 - Certificate and CRL validation fails from March 1, 2026

Fixes are already available in the SK. Please follow the SK for updates and additional fix availability.


r/checkpoint • • Apr 11 '24

Checkpoint Application Control X-VPN

21 Upvotes

Hello, there was a problem with our application control today. Normal traffic to various websites is categorized as X-VPN traffic. (X-VPN is blocked) Has anyone had a similar problem?


r/checkpoint • • Sep 10 '26

CPLP - Check Point Live Patch (sk185114)

Post image
20 Upvotes

Having just read about CPLP yesterday I was surprised to find this morning while arranging to do some JHFs tonight for customers (for the 2 CVEs announced yesterday) that it has been auto-downloaded, installed and activated on every R81.20 and upwards gateway that I have investigated today though the AutoUpdater utility.

It's gone and virtually patched against CVE-2026-85102, CVE-2026-85102 & CVE-2026-50751.

Basically if you have the download consent flag activated (as it is by default) and the gateway or manager has access to Check Point then its beenm turned on.

I'm not entirely sure how to feel about this. Seems like a decent enough idea, but it seems to be contrary to the usual Check Point behaviour of the last 25+ years of not enabling new features/flags without explicit action.


r/checkpoint • • Oct 06 '26

SmartConsole "Multiple Points" message

19 Upvotes

In case somebody over here also wonders about the "Multiple points" messages shown by SmartConsole recently (see screenshot): It has been reported through an SR and R&D has developed a fix for it which should be released soon.


r/checkpoint • • Feb 12 '25

What is the advantage of Check Point against its competitors?

19 Upvotes

I just saw this post and read there (as well as in other places on the internet) that people are not fond of Check Point gateways. I don't have experience with other brands and only work with Check Point so I don't have a good understanding about the differences between brands. So I decided to ask.

What does Check Point do better and how does it keep its position in the market despite not liked by some? Is it the extensive customizability, or protection surface, or anything else? I'm well aware that it has a solid environment (not without its own problems though, but nothing is perfect in this universe), but still don't have a good understanding of what makes it stand out and hold on its position in the market.


r/checkpoint • • Oct 22 '24

R82 released yesterday - it's playtime!

19 Upvotes

Just got the message: R82 release is available now. I'll put it on my 3600 appliance at home, fingers crossed, too many thing to be excited about! :D

Downloads + Manuals: https://support.checkpoint.com/results/sk/sk181127

From the website:

R82 is Check Point's major software release for Quantum products and CloudGuard Network Security. It introduces 50 innovative capabilities to strengthen threat prevention, greatly streamline operations and provisioning, and troubleshoot network connections with integrated diagnostics tools.

This release provides access to new AI-powered threat prevention engines that strengthen defense against zero-day phishing, brand spoofing, malware, and more. R82 also adds DNS protection against NXNS, offers DNS configuration granularity, and supports DNS-over-HTTPS Inspection.

Check Point offers the industry's first complete protection for HTTP/3 over QUIC. R82 also enables effortless and automated HTTPS Inspection deployment with granular controls and exceptional performance.

Check Point's VSX has a new versatile mode (VSNext) that unifies management features and APIs across Virtual Systems and physical Security Gateways. Furthermore, cluster management is greatly simplified with a new page in Gaia Portal and a new mode (ElasticXL) that enables Security Gateway clustering without the need for physical Orchestrators.

In addition, R82 introduces a new version of Check Point's operating system with superior networking and routing capabilities. For automation, users and DevOps teams can now execute API calls directly to security gateways through a new dynamic policy layer. For future-proofing, R82 enables NIST-approved Kyber (ML-KEM) encryption to protect today’s VPN traffic against future quantum computing-based hacking.

These are just some of the powerful new capabilities in R82.


r/checkpoint • • Jul 07 '20

Check Point CCSA

19 Upvotes

Hi Guys,
Am creating a youtube serie with the goal to cover all of the Check Point CCSA certification topics.
Hope you guys enjoy it!
https://youtu.be/By7pmUF7gOs

Regards,
Magnus


r/checkpoint • • Feb 03 '20

IPsec VPN [Check Point] Overview

19 Upvotes

Hey Everyone,

My name is Evgenii, and I have been working with networking products for years. I want to share some of my expertise that might be helpful. I have been working as a Technical Support for Check Point Software Technologies in a VPN team.

Therefore, in today’s post I want to discuss the following topics

  • What is a VPN?

  • What is IPsec?

  • IPsec Debugging & Troubleshooting

What is a VPN?

VPN (Virtual Private Network) – is a logical connection designed to interconnect networks that are physically not in the same location. VPN connection is also private, thus the traffic should be encrypted.

If we are connecting a whole site to another site, that type of connection is called site-to-site.

If we are connecting a remote user to access corporate resources, that type of connection is called client-to-site

Devices that are performing encryption and decryption are called peers.

An administrator defines an Encryption domain (hosts, networks and other objects that have to go to the VPN tunnel).

When you are setting up client-to-site connection, you define an encryption domain on one side, and define clients that will have access to these encryption domains.

There are main stages how VPN session is being established.

  1. Peers have to authenticate each other to make sure the encrypted traffic is sent to a proper destination.

  2. Peers agree on what protocols will be used for encryption, what subnets will be used etc.

  3. A session key is generated, which is used for encryption and decryption of the traffic.

There are different ways how these functions can be done, but we are going to be exploring IPsec.

IPSec

IPsec (IP Security) – is a secure network protocol suite that is used for authentication and encryption over the Internet Protocol (3rd Layer of the OSI model).

IPSec provides:

  • Confidentiality – via encryption

  • Data Integrity – via hashing (method that guarantees the data was not changed)

  • Authentication - via Digital Signatures or Pre-shared key (PSK)

Protocols and ports Used in IPSec

Name of the ProtocolPortDescription
ESPLayer 4 Protocol 50Encapsulates all data. Provides encryption
NAT-T (NAT Traversal)UDP port 4500NAT Traversal is used to overcome NAT, since ESP doesn’t support NAT, the technology adds a fake UDP port 4500 header on each IPsec packet
IKEUDP port 500Internet Key Exchange (IKE) is the protocol used to set up a secure authenticated communication between peers

IPSec tunnel consists of two phases.

Phase 1

The main purpose of phase 1 is to establish a secure connection and authenticate peers. Asymmetric encryption is used to build a first phase, since it is more secure (but more CPU intensive)

Phase 1 Includes: Hash algorithm, Encryption Algorithm, Diffie-Hellman (DH), Authentication Method and Lifetime of the IKE Phase 1 tunnel.

Hash Algorithm: Hash is a pseudo-random function (PRFs). Contains nonce values from the initiator and the responder. No other party cannot predict the function value in advance. It is used in IPsec for authentication.

Encryption Algorithm: It is used for encryption (DES, 3DES, AES).

Diffie-Hellman (DH): The Diffie-Hellman (DH) key exchange algorithm is a method used to make a shared encryption key available to two entities without an exchange of the key. DH starts by exchanging public and private keys. Through math they arrive at a symmetric shared key. This shared key is used to protect Phase 2 negotiations, unless PFS (Perfect forward secrecy) for Phase 2 is enabled, which causes the gateway to run DH again in Phase 2 to generate a new shared key for encryption.

Authentication method: Can be either a pre-shared Key or a Certificate

Lifetime: Specifies the lifetime of the Phase. Check Point uses seconds as a value, other vendors, sometimes, use KBs. If you are building a tunnel between Check Point and other vendor, these values have to match.

Note: The shorter the lifetime, the more secure the IKE negotiations.However, longer lifetimes helps to set up IPsec SAs more quickly

Phase 2

After the tunnel is secured and authenticated, in Phase 2 the channel is further secured for the transfer of data between the networks. IKE Phase 2 uses the keys that were established in Phase 1 of the process and the IPSec Crypto profile, which defines the IPSec protocols and keys used for the SA in IKE Phase 2. During the Phase 2, peers agree upon subnets that would be used in the tunnel.

Permanent Tunnel

There are 2 ways to keep tunnels opened

“Tunnel Testing” – proprietary Checkpoint protocol. Works on UDP port 18234. Does not support 3rd Party vendors.

“DPD” – Another way to do KeepAlive packets. DPD supports 3rd party Vendors.

  • Active DPD - A peer receives DPD requests at regular intervals (10 seconds). DPD requests are only sent when there is no traffic from the peer.

  • Passive DPD - Peers do not send DPD requests to this peer. Tunnels with passive peers are monitored only if there is IPsec traffic and incoming DPD requests.

VPN Routing

There are different ways how you can route traffic in VPN.

Full mesh – every gateway is connected to each other.

Star Routing – Satellite gateways are not able to communicate with other Satellite gateways directly. Only through a central gateway.

Mixed Routing – You can add multiple Gateways as central ones.

In the VPN community, you can specify more granular control for the encrypted traffic. You can route traffic from Satellites to Central only, you can route to other satellites, or even to Internet through Central.

Troubleshooting & Debugging

Debugging

The following commands will generate an ike file, that can be used to analyze why VPN connection is failing.

1) [expert]#vpn debug trunc

Enables VPND and IKE debug

2) [expert]#vpn tu

Removes Phase1 and Phase 2 from the system

3) Initiate VPN traffic from both sides (traffic that has to go through the tunnel)

4) [expert]#vpn debug off

Disables VPND and IKE debug

Once you stop the debug, It will generate an ike.elg file in the system.

$FWDIR/log/ike.elg - path where the logs are stored for the IKE debug

Right after you collect the debug, you need to open it.

Analyzing the output

IKEview is a GUI tool to read IPsec Phase 1 and Phase 2 per packet. You can download it for free on CheckPoint support portal.

Once you open the ike.elg file in the IKEview utility, it's going to show you each packet in the Phase 1 and 2 negotiation.

In IKE view:

Phase 1 labeled Main Mode or Aggressive Mode

Phase 2 Labeled QM or Quick Mode

< - packet Check Point Received

> - packet Check point is sending to remote peer

If IKE fails on:

Phase 1 (Main mode)

Packet 1 – check VPN proposal (encryption/hash/lifetime);

Packet 2 – response from a peer to agree on Packet 1;

Packet 3 and 4 – almost never used in troubleshooting. Nonce word is sent;

Packet 5 and 6 – performs authentication between peers. If it fails on this stage the certificate or pre-shared key has to be checked.

If it Fails on:

Phase 2 (Quick Mode)

Peers exchange key material and agree encryption methods. The DH key is combined with the key material to produce the SYMMETRICAL Ipsec key; During Quick Mode failures are generally to a misconfigured VPN encryption domain.

keep in mind that different vendors use different values for SA lifetime. Some of them use KBs, while others use Seconds. That applies for both phases.

This is a light method of debugging, can be used in production and will not affect a CPU increase. Nevertheless, it does help to fix 90% of VPN connection related problems.

Also, check out my full CCSA R80.10 Course.

https://www.udemy.com/course/check-point-ccsa-r8010/?couponCode=853777FCFF5144412A5B

Best regards,

Evgenii Puzakov.


r/checkpoint • • Aug 04 '26

[TIP] LOM for Beginners

18 Upvotes

I posted a Full guide on CheckMates:

https://community.checkpoint.com/t5/Check-Point-for-Beginners/LOM-for-Beginners/ba-p/279099?cat=2

(If you find it useful, I'd appreciate a like on the CheckMates post! 🙂)*

Many Check Point administrators still don't configure LOM (Lights Out Management), even though it's one of the most valuable features for remote troubleshooting.

Think of it like Dell iDRAC: it provides out-of-band management, allowing you to access the appliance even if Gaia is down, frozen, or powered off.

In the guide I cover:

  • What LOM is and why it matters.

  • A real-world example where LOM saved a maintenance window.

  • Initial configuration steps.

  • Firmware update recommendations.

  • Best practices for deploying a dedicated LOM management network.

Do you enable LOM on every deployment, or have you ever needed it during a critical outage? I'd love to hear your experiences.


r/checkpoint • • Aug 03 '26

CVE-2026-16232 is being actively exploited — Check Point Management remediation should be prioritized

18 Upvotes

Check Point confirmed active exploitation of CVE-2026-16232, a CVSS 9.3 authentication bypass affecting Security Management and Multi-Domain Management.

The observed cases involved Management servers exposed directly to the Internet without IP restrictions, but restricted environments should not delay remediation. Reduced exposure is not the same as removing the vulnerability.

Recommended actions:

  • Install the Jumbo Hotfix released on July 22, 2026.

  • Restrict SmartConsole Trusted Clients.

  • Remove direct Internet exposure from Management.

  • Review administrator, API, application-token, policy-change, and policy-install activity.

  • Search logs for the published IoCs.

  • Validate Management HA, logging, and policy installation after patching.

The key point:

Management infrastructure should be treated as Tier-0 security infrastructure, because compromising the system that manages policies, gateways, VPNs, and security controls can undermine the trust of the entire architecture.

Full technical post and remediation guidance on CheckMates:

https://community.checkpoint.com/t5/Firewall-and-Security-Management/CVE-2026-16232-Active-Exploitation-Requires-Immediate-Management/m-p/280570#M106422

Has your organization already patched and reviewed Management access exposure?


r/checkpoint • • Jan 05 '24

Harmony Email & Collaboration Best Practice Videos here...

18 Upvotes

I work for Check Point in the UK :) so hi CP Fans. I've made some videos on best practice for Harmony email. Hopefully these are useful for you guys.

Secure Your Email in 2 Minutes -> https://youtu.be/2CxTZKFDXts?si=gBVYU1nY4_lFUj8Z

Block Spam and Phishing -> https://youtu.be/NZVAnC4TvWw?si=b1LKiH54sqSorauH

Detect Zero Day Malware in 4 Minutes -> https://youtu.be/Y_AphWHMWR4?si=F-UYBJicRyB-6MAw

Inspect Encrypted Files in 4 Minutes -> https://youtu.be/clVzi3oFWzI?si=K28XTa1aSu9PEJ39


r/checkpoint • • Dec 03 '20

CCSA Certified !

18 Upvotes

Hi all !

Just succesfully passed the CCSA certification exam today ! No surprises, it is much simple question about GUI and basic concept. For training CCSA manual R80 and the 200 first question of the ExamTopics site is more than enough 👍


r/checkpoint • • Sep 09 '26

[Action Required] - Critical Security Advisory: VPN Vulnerabilities CVE-2026-85102 and CVE-2026-8510

17 Upvotes

Check Point has published a critical security advisory covering two VPN-related vulnerabilities: CVE-2026-85102 and CVE-2026-85103. Under specific conditions, these issues could potentially allow unauthenticated remote code execution, so this is something Check Point administrators should review immediately.

An important detail is that these vulnerabilities were discovered internally by the Check Point research team. According to Check Point, there is currently no indication of active exploitation. That is good news, but it should not reduce the urgency of remediation.
Check Point recommends installing the latest Jumbo Hotfix containing the fixes as soon as possible.

Customers using Check Point Live Patch can receive protection through the Live Patch mechanism, with the rollout beginning on September 9, 2026; the fixes are also available through the relevant Security Advisories.

If you manage Check Point environments, I would classify this as action required: review the affected versions, confirm your remediation path, validate Live Patch/JHF status, and schedule the update rather than waiting for evidence of exploitation.

More information and the official advisory references are available in the CheckMates post:
https://community.checkpoint.com/t5/General-Topics/Action-Required-Critical-Security-Advisory-VPN-Vulnerabilities/m-p/281995#M46881


r/checkpoint • • May 27 '24

Important Announcement - Enhance your VPN Security Posture!

16 Upvotes

r/checkpoint • • Feb 07 '21

VSX Course

16 Upvotes

Hi Guys,

I started to add some more videos regarding VSX on my youtube if you guys are interested :)Hopefully in time it will cover all the topics for the CCSV. (far from done yet)

https://youtu.be/psIo1Pdf5UQ

Full playlist.
https://www.youtube.com/watch?v=g2yVhUhYOHM&list=PL4Jm1LJEII4ZiVFkjtB1zMyOzn0LUVP21

Regards
Magnus


r/checkpoint • • 22d ago

CVE-2026-98432: Has Anyone Seen an Official Check Point Assessment?

15 Upvotes

I started a thread on CheckMates to discuss CVE-2026-98432 and ask for an official assessment of its applicability to Check Point platforms.

The questions are straightforward: are any products or Gaia releases affected, what conditions would make them vulnerable, and are any mitigations or fixes needed?

A reference to the Linux kernel alone doesn’t establish that Check Point products are affected. The goal is to gather confirmed information and give administrators a place to follow official updates.

The link to the CheckMates discussion will be in the first comment.

Has anyone received guidance from Check Point Support or found a relevant SK? Please share any public references in the discussion.


r/checkpoint • • Oct 22 '26

PHP2Shell: PHP vulnerabilities, operational impact, and Check Point protection

15 Upvotes

I put together a technical analysis of CVE-2026-109618 and CVE-2026-109619, known as PHP2Shell, which can allow unauthenticated remote code execution.

The vulnerabilities originate in the PHP runtime. However, products that embed PHP are not automatically immune. For Check Point environments, consult sk1000302 and verify the guidance applicable to your installed version.

The article covers:
Memory corruption and use-after-free mechanisms.
Impact on applications and web worker processes.
Patched versions and validation of backported fixes.
IPS protection, including effective enforcement, exceptions, and HTTPS traffic visibility.
Update procedures, worker restarts, and rollback considerations.

IPS/WAF protections are complementary controls. Patching the runtime remains necessary, and Detect does not mean blocking.

The full article will be linked in the first comment.

How are you assessing exposure: through package inventories alone, or by checking the runtime actually serving each application?


r/checkpoint • • Sep 22 '26

Critical Vulnerability CVE-2026-93616 in Check Point Security Management (CVSS 9.8)

15 Upvotes

Anyone did take 45 on R82.10 yet?

Check Point has released a fix for CVE-2026-93616, a critical vulnerability (CVSS 9.8) that allows an unauthenticated attacker to upload and execute arbitrary scripts on Security Management servers. Exploitation has been observed in the wild, and to date only a handful of customers are known to have been attacked.
Affected products include Security Management, Log Server, Multi-Domain Management, and Multi-Domain Log Server.
Note: Quantum Force and Quantum Spark firewalls are not affected, and Smart-1 Cloud is already patched.

What we ask you to do now:

  • Upgrade to the latest Jumbo Hotfix for your release (R82.10 JHF Take 45, R82 JHF Take 127, R81.20 JHF Take 170; R81.10 JHF Take 192)

  • R82.20 Customers - install available HF - R82.20 Security Hot Fix Take 1

  • Note: a LivePatch is not available for this issue.

  • Restrict management access so that port 19009/tcp is reachable only from trusted IPs, per our Hardening Best Practices.

  • Check for compromise using the detection steps in the advisory.

Solution

This problem was fixed. 

The fix is also included in:


r/checkpoint • • Sep 15 '26

Check Point Live Patch: Why sk185114 Changes the Operational Security Model

15 Upvotes

Check Point Live Patch (CPLP), documented in sk185114, changes an important part of vulnerability management on Gaia. Instead of waiting for the next maintenance window to apply a Jumbo Hotfix, CPLP can provide runtime mitigation directly to affected Check Point processes, reducing the exposure window while the permanent remediation is planned.

The key operational point is that Live Patch does not replace Jumbo Hotfix. Think of it as two layers: CPLP provides immediate protection, while the JHF keeps the permanent software baseline. That means checking only the installed JHF Take is no longer enough—you also need to understand the current Urgent Security Update and CPLP state.

From a troubleshooting and validation perspective, commands such as cplp list and autoupdatercli show urgent_security_updates become much more relevant. States such as armed, ready, and jumbofix need to be interpreted correctly, and in ClusterXL or Maestro environments the validation should cover every member/SGM, not just one gateway.

For me, the biggest change is the operational model: time-to-protection is no longer necessarily the same as time-to-maintenance. You can reduce exposure quickly with CPLP and still schedule the permanent Jumbo remediation later. Full technical article on CheckMates: https://community.checkpoint.com/t5/Firewall-Security-Management/Check-Point-Live-Patch-Why-sk185114-Changes-the-Operational/m-p/282373#M106773


r/checkpoint • • Aug 20 '26

R82.10 is now Check Point's recommended version for all customers

14 Upvotes

Check Point has officially designated R82.10 as the Recommended Version (Production Grade) for all deployment scenarios (Quantum Security Gateways, Management Servers, and Smart-1 appliances).

If you are planning your upcoming maintenance windows or lifecycle upgrades, here are a few key takeaways:

  • General Availability to Recommended: It has met Check Point's deployment and stability thresholds across production environments.

  • Key Improvements: Includes the latest performance optimizations, security engine enhancements, and management stability updates introduced in the R82 release train.

  • Upgrade Planning: Check Point recommends reviewing the known limitations, upgrade paths, and release notes before upgrading production environments.

For full details, upgrade best practices, and release notes, check out the official announcement on CheckMates:

🔗CheckMates Announcement: R82.10 is now Check Point's recommended version

Are you running R82 / R82.10 in production yet, or are you holding on R81.20 for now? Share your upgrade experience or any gotchas below.


r/checkpoint • • Jan 24 '21

My journey with CheckPoint Identity Awareness

14 Upvotes

I would like to share my experience with CheckPoint Identity Awareness (IA) in a large scale deployment over the last two years.

The burning ship:

Since I joined this company it is using IA for many diffrent use cases. The three most used cases were: 1 - Allow users access to segmented ressources (like prod, network management etc.) 2 - Controll access to internal ressources from a citrix farm (dedicated for external partners etc.) 3 - removing the need for IP Ranges as source in firewall rules overall. (caused by a messy/ non existing IP design)

When I joined the company we almost had problems with IA every week, either it didn't worked at all and a pdp and pep table cleanup was needed, or some Identity Sharing between diffrent firewalls didn't worked reliable.

At this time 30 indiviual firewalls shared and pulled identitys from each other all the time. The whole think was fully meshed. Each GW did AD Querry against his local Domain Controller (AD Querry shouldn't be used anymore at all IMO).

This whole setup was just a mess and frustated the users, the management and myself. The service provider and my predecessors who installed and "mainted" this burning pyre were not here anymore.

Light at the end of the tunnel:

We deciced to call CheckPoint PS to help us, to find a solution for IA in a large scale deployment. To keep this story short, the provided us something called "identity acquisition gateway" today called PDP Broker or Identity Broker. This was at that time a special hotfix for a R80.10 JHF. The idea behind the PDP Broker is simple but at the same time brilliant.

We remove the whole Identity gathering and rule calculation thing from our hard working firewalls and let them only enforce the rules (PEP). The PDP Broker takes the complete process (PDP) aways from the gateways.

At the same time it allows a much more efficent way of sharing identity between indivual PDP Brokers via https RESTAPI. So we now finaly had a plan how to improve the situation for us.

I attached a high leval diagram to this post, so you can see the result of a 6 month project + a upgrade to R80.40 to get full support for the PDP Broker in the main train.

This setup is now runing since 6 months, without any problems after some very nice discussons and litle bugs together with the R&D team behind the PDP Broker during the build.

During our project, CheckPoint also did a awesome job with some very important Fixes for the stability and reliablity of the product itself. The two monst important fixes IMO are:

sk167174 - Maybe the fix with the most impact regarding overall reliablity. sk170516 - super new fix, but checkpoint just did a indepth codereview of the smartpush/smartpull mechanism and fixed many bugs in their code. (PDP to PEP and reverse mechanism). It removed the need of some nasty workarounds and cronjobs in our enviroment.

How is your experience with CheckPoint IA ? Let me know!


r/checkpoint • • Sep 17 '26

R82.20 Threat Prevention: What Actually Changed and Why It Matters

13 Upvotes

R82.20 does not replace the Threat Prevention architecture introduced in R82 — it extends its coverage in areas that are becoming increasingly relevant in modern environments. The main changes include Snort 3.x support in IoC Feeds, DNS Trap for IPv6, improved TLS block-page visibility, AI workload/agent protection, and additional gateway hardening.

From an operational perspective, the biggest gains are in custom detection and IPv6 coverage. SOC teams can bring newer Snort 3.x detection content into the Check Point prevention pipeline, while DNS Trap can now cover dual-stack environments instead of leaving IPv6 outside that workflow.

R82.20 also improves troubleshooting and emerging workload protection. TLS failures caused by revoked, expired, or untrusted certificates can provide clearer feedback to users, while new AI security capabilities expand enforcement beyond traditional malware, URL, DNS, and exploit detection.

The real question after upgrading should not be only “Is R82.20 installed?” but “Which of these new protections are actually being incorporated into the security architecture?” I published the full technical analysis on CheckMates with the R82 vs R82.20 comparison and the operational points I would review after an upgrade.