My house is a 1910s two-up two-down in a city mostly famous for being flattened during the Blitz (and has the scars to prove it)! It survived the war, hoarding, and property developers who were surprisingly skilled at hiding their bodges before it finally came to me.
The original fireplace was apparently hidden behind a 1970s tile fireplace, which the property developers removed - they then slapped even more paint on it.
This year the suspended floor in the front room partially collapsed, which turned out to be a lovely combination of previous bodges failing and rotten joists! After the floor and half the plaster was replaced I really needed a win and as the room was a total mess anyway, decided this would be a great opportunity to see what was underneath the many, many layers of paint. Halfway through I decided I wanted to do the mantelpiece as well, which turned out to be very nice slate.
Many, many hours of labour and multiple tubs of Kling Strip later, here we are - log-burner is installed just in time for winter!
Edit - Hello everyone 😄 Thank you so much for all your lovely feedback, you've really made my day! It was this subreddit that really inspired me to have a crack at this project, I am forever lurking in here feeling envious of your beautiful door hardware, stained glass, and all the gorgeous woodwork😅
To answer some questions about the process, the most important thing is safety first! The surviving original woodwork in my house is definitely positive for lead, so I took it as given that all original surfaces are too, this meant no sanders or heatguns were used and I wore PPE at all times.
The paint stripper I used is called Kling Strip - it's a poultice type stripper that is applied as a really thick paste and covered with clingfilm for 8 - 48 hours, then peeled away - I think the US equivalent is Peel Away. I was lucky as about 80% of the paint came off in one peel, leaving just a sticky black residue behind which can be washed/scrubbed away - it's a really safe way of dealing with lead paint as it doesn't create any dust or heat. With cast iron flash rust is a big concern, so for the surround I used white spirit and a wire brush to scrub away the residue instead of water - the trick is to use as little pressure as possible so as not to scratch the iron or tiles, it was tricky and time consuming but very rewarding once done! The slate mantelpiece was much easier going as I could remove the sticky paint residue with a normal sponge and water, however I would advise if completing a similar project to start with the mantelpiece as I kept on dripping water onto the freshly stripped cast iron surround which undid my work to prevent rust and meant additional scrubbing to remove it - I really did the project backwards!
Afterwards I applied Stovax Graphite Grate Polish to the cast iron surround to give it some protection and prevent it from rusting while preserving all the lovely details, it was very easy to apply and a tiny tube goes a really long way. For the mantelpiece I used slate oil - this was also really easy to apply but the cloths used to apply it can spontaneously combust while drying, so always read the tiny print on the back and have somewhere fireproof to store your drying cloths!
All together, I would say this project cost around £300 for all the various strippers, buckets, cloths, endless wire scrubbing brushes, plastic sheeting to contain the spills, and about eight days of labour but a lot of that was waiting on the paint stripper to work!
The stove was installed about a month after I finished restoring the surround - it's a multi-fuel burner but I'll only be feeding it logs 😊 To install it the installers removed the old fireback and damper, they're the incredibly rusty things visible in the photos. The chimney was never capped and as the fireplace was covered with a 1970s façade the rain had no way to evaporate, so they were very, very rusty! Once the fireback and damper were removed they installed the new slate hearth (sadly the original hearth was a victim of 100+ years of horrendous DIY so was beyond saving), installed heatproof panels inside the chimney breast, then lined the chimney with a flue liner and installed the stove. As the chimney and chimney breast were in otherwise good condition they didn't need to do any serious structural work so the install only took a day. The stove is a Salamander Hobbit, it's tiny but packs a big punch and is just the right size to preserve the surround while making the fireplace functional again.
Last but not least, click here for cat tax!