r/ccna • • Jul 11 '21

There is Some Very Poor Advice Being Given Out

3 Upvotes

No doubt I'll get a lot of hate here but I've coached many tens of thousands of students for CCNA and more and my classroom courses had a near 100% first time pass rate.

Packet Tracer is a great study tool but you are missing the point if you just use this for the exam. You are trying to get a job as a network engineer so you MUST at some point configure live equipment. It's literally a few bucks on eBay and you can sell it when you are done. Or jump on some live racks or at the very lease use GNS3 etc. PT supports most of what you need to know but you need to dig into show commands and run live debugs on your traffic and PT is very poor at this.

You could learn to fly a plane by training on simulators alone but would you get in the plane with that pilot? Real pilots learn how to physically check the inside and outside, tyres, sensors, fluid levels etc. Sims are a useful and convenient tool and no more. Plug some cables in, get them upside down and back to front and mistake your serial for ethernet and vice versa. That's how you learn. If you turn up to a job interview and they give you equipment to cable up and configure you will feel stupid.

The advice from people who either haven't passed the exam or have just passed it and don't actually work in networking is putting a lot of people on the wrong track. It's been going on for decades but having been on both sides I can see it for what it is now. You need to take the harder path and learn to be a network engineer and not how to pass exams as fast as possible.

You need to spend at least half your study time configuring everything listed in the exam syllabus. Configure it, break it, fix it. That's how you really learn, the exam is just a formality to demonstrate you can do the job.

Bring on the hate.

Have Fun

Paul Browning

https://www.howtonetwork.com

https://www.101labs.net


r/ccna • • Jun 21 '22

Stop asking how to study

0 Upvotes

This sub is mostly just the same questions over and over:

What study materials does everyone recommend?

How do I study for this?

How long will it take me to study for this?

Etc...

I would love to see a requirement that the questions be of a topic or concepts in the test to make this sub more helpful.

/Rantover


r/ccna • • Apr 21 '26

ccna 2026

2 Upvotes

I have security+ and was planning on getting network+ but I was a little tight on budget so I wanted to check if it's actually worth getting by lying on my resume saying i have network+ and CCNA which didn't give me any different results (0 email back). Is CCNA ACTUALLY worth getting?


r/ccna • • Jun 01 '24

is CCNA even worth it anymore?

10 Upvotes

Edit: we verify certs.

We just interviewed candidates for an entry-level position in our IT department's core network administration team.

More than three (we interviewed 8 so far) candidates who had CCNA and a few who had partial or full CCNP were not able to answer simple questions like "What is a VLAN and how can it be useful?" or "Explain in your own words the difference between a switch and a router" or were able to explain which show commands might be useful in finding where a device is connected in a simple network given its IP address.

I see there are new questions now on the CCNA about AI and machine learning.

That's super but I need someone who can actually function at layers 1 through 3 at some basic level even ignoring dynamic (or even static) routing protocols.

We didn't even bother with questions about STP or anything else given the baseline we were presented with.

I'm starting to think that looking for these certifications isn't even worthwhile anymore. I'm pretty sure you can just buy them these days.


r/ccna • • Sep 30 '22

Being Black in IT.

34 Upvotes

I often have to deal with a different set of standards when it comes to job placement and opportunities. My white best friends often get jobs in network administration without the need for a CCNA. They all have a 2 year degree like myself. Buy for some reason the same jobs we apply for I’m always required to have something that I don’t already have. It used to be I needed the ccna until I achieved that now it’s a bachelors degree. I truly love networking and it sucks to always be in a state of depression because of the state of different circumstances always seem to be worse on my end. Just wondering if anyone else experiences these things ? Even my current job some of my colleagues who are white always try to out do me as if it’s a race to be the best. I’m always seconded guessed and questioned on my inputs to the point where I start to question myself. I’m good at my job which is as of now desktop support. I just hate I always seem to get the shitty end of the stick while people I know how can’t even remember to use ipconfig to verify someone’s ip address.


r/ccna • • Jul 19 '25

What cisco certs lead to remote work

0 Upvotes

Hi all

Wondering what cisco certs lead to remote work and what the jobs look like and how the market is atm. I'm guessing NOC is the entry ? What other remote networking work is done or is it mainly onsite with server racks etc. Cheers.


r/ccna • • Jun 09 '24

How often do you use Cisco IOS when there is Cisco Switches at work?

1 Upvotes

Hello! For those of you out in the field, how often do you use Cisco IOS when there is Cisco Switch at the place you work? I am having a hard time wanting to memorize these commands due to the fact that I feel it is not going to help me whatsoever and it is just a marketing thing. Also, I know this is a CCNA reddit but I am studying for my CCST and I am now back to thinking I should just study for the CCNA instead. Any feedback is welcome.


r/ccna • • Mar 28 '14

Back with another quick question

Thumbnail
imgur.com
1 Upvotes

r/ccna • • Sep 11 '26

Career Transition from Accounting to Network Engineering

4 Upvotes

Hi,

I currently work in accounting and make around $75k, but I’m looking to transition into network engineering. I have a master’s in accounting and already have my CCNA.

My main concern is avoiding a significant pay cut. Would it be better to stay in accounting while applying for networking roles, or move into IT Audit first as a bridge?


r/ccna • • 3d ago

VLSM isn't hard once you sort biggest-first — worked example with 192.168.1.0/24

0 Upvotes

The mistake that costs CCNA candidates the most points on VLSM questions isn't the math — it's allocating in the order the requirements are listed instead of largest block first. Worked example:

You're given 192.168.1.0/24 and four requirements: LAN A needs 50 hosts, LAN B needs 25, LAN C needs 10, and a point-to-point WAN link needs 2.

Sort by size, then assign blocks that align on their own boundary:

- LAN A, 50 hosts → /26 (62 usable): 192.168.1.0/26 — addresses .0–.63

- LAN B, 25 hosts → /27 (30 usable): 192.168.1.64/27 — addresses .64–.95

- LAN C, 10 hosts → /28 (14 usable): 192.168.1.96/28 — addresses .96–.111

- WAN, 2 hosts → /30 (2 usable): 192.168.1.112/30 — addresses .112–.115

Everything from .116 to .255 is still free — more than half the /24 — because each block started exactly where the previous one ended and every block size is a power of two, so alignment takes care of itself.

Two checks that catch most errors before you commit: (1) usable hosts = block size − 2, and the requirement must fit with room to spare, not exactly; (2) a /27 can only start at .0, .32, .64, .96… — if your start address isn't a multiple of the block size, the allocation is wrong no matter how clean it looks.

Where do you lose points on subnetting questions — the allocation order, or the boundary arithmetic?


r/ccna • • May 16 '26

BOSON is too costly

1 Upvotes

BOSON is too costly is there recommended practice tests which will help me Ace CCNA . Please Answer with the links which you would suggest that will help me to ace the exam .


r/ccna • • May 05 '15

What a CCNA did for me.

31 Upvotes

I am a 23 year old male that had a rough start to my adult life. Circumstances and a young terrible thought process made me drop out of high school. I worked at a moving company for 3 years and after everyone forcing me to get my ged and attend college because they said "I was too smart to waste my life humping furniture"

 

I started going to college after ged to make the people who were putting in effort to make more of myself because I respected them. My advisor at the community college asked what i wanted to do. I said computers, technology. She said "okay here is the network technician track, with the cisco program". I had 0 network experience but I went through with it to make my family happy.

 

At this point I was working 60+ hours a week moving furniture and 15 hours a week at night doing cisco classes. I became interested in networking because for once I finally had been faced with something challenging. I hated school because it was so easy and boring but networking is a vast field with so much to learn. I became so passionate about it because I saw a challenge for the first time.

 

I passed my ccna and within 1 week I had dozens of requests for interviews in tier 2 support. (17-20 dollar an hour jobs). I had 0 work experience and I wasn't satisfied with getting a ccna then working in a call center. I decided to just keep looking and then I was contacted by a recruiter contractor for a major isp that needed network engineers. With only a ccna and no work experience I was able to interview and prove my passion and hunger for knowledge. I was offered the job instantly. A ccna with no degree or work experience landed me a network engineering position at a state of the art isp ( contractor of course).

 

After 16 months, I felt the signs that you feel when you need to move on and a work environment isn't right for you. I put my resume online and was contacted by 40+ places, blowing up my phone all day long and my email. I learned so much from the previous job but again only 16 months experience and a ccna.

 

I was able to land a senior ip engineer position with a major isp out of this area that I now earn over 110k a year that was intended for engineers with 10 years experience with a bachelors. My message to anyone that is interested in networking as long as you make people see you're hungry and passionate, that you want the challenge and you sell yourself then you can achieve amazing things. CCNA IS WORTH EVERY PENNY. Network enginner is an amazing field. Coming from someone who had a terrible start to my professional career , hard work can get you places in networking and it's worth all the effort.
TL;DR Get your CCNA!

Edit for Grammar

Edit1: I have contacted the mods to verify my pay and current job and title as some people believe I am lying and rather than discussing how the beneficial having the certification CAN be we will first prove I am not a liar. Pending response from mods.


r/ccna • • Mar 22 '25

Feel like I’m the only one who got a difficult exam

0 Upvotes

How did yall finish? A lot of those questions were long af and needed to be read over 2-3 times. And the labs were not easy😭


r/ccna • • Jun 15 '24

Can I attain my CCNA with a ged?

0 Upvotes

I’ve worked in the union for years and I’m tired of this field. Heavy labor.

How do I get started with any of this? I’ve been coming across TikTok’s with cybersecurity, CCNA, A+, Cisco etc. currently got laid off after 8 years. I’m tired of this, is it too late to learn a new field? I’m 34 and have a new born.

I’m willing to learn. Lmk what I have to do please. Any advice?


r/ccna • • Feb 03 '26

Is there a CCNA course that pulls out the content for the network+

0 Upvotes

I am trying to study for my CCNA I just passed my network+ and am daunted by the fact that most courses are almost triple of the course I just finished and passed with only watching the content once I pass exams and learn very quickly and would like some info on short courses I almost started to watch network chucks videos but it isn't complete and wont be completed any help would be appreciated but I can end up watching the free resources too and be happy but please don't mention all of the free you tube courses if it is over 50 hours of content.

Edit: thank you for your responses but I think I was slightly unclear a lot of the courses online combine quizzes with flashcards and labs and I was hoping for a course that gives only information


r/ccna • • Nov 17 '13

Chapter 1, STP...

Thumbnail
imgur.com
0 Upvotes

r/ccna • • Apr 29 '25

Networkchuck CCNA

0 Upvotes

Does any body have network chuck ccna paid course videos ??


r/ccna • • 10d ago

Why "Knowing the Theory" is only half the battle when troubleshooting your first real network issue.

0 Upvotes

Many of us spend hours mastering subnetting math and memorizing OSPF states while prepping for the CCNA. It’s an essential foundation, but the first time you’re staring at a "down/down" interface or an asymmetrical routing issue in a live environment, those textbook definitions can feel a bit abstract. 

One thing that helps bridge the gap is practicing "show" commands not just to see if things are working, but to understand exactly how the traffic is being handled. For instance, verifying the MAC address table or checking for VLAN mismatches often reveals more about a connectivity issue than a simple ping ever will. It's really about moving from memorizing CLI syntax to visualizing the underlying packet flow across the topology.

For those who have recently started working in the field or are deep into labs, what was the first networking concept that only truly "clicked" for you after you saw it break in a real-world scenario?


r/ccna • • Jul 07 '23

What do you guys think about Jeremy's IT lab (Your opinion)?

2 Upvotes

I personally think he is great, however he takes lots of detours and talks about stuff that aren't relevant to CCNA which makes it extremely boring and time consuming. I just wish he was more straight to the point and kept his videos little shorter. PS: I also do think he over complicates some topics as well. A 2 min explanation could be sufficient but he goes on and on and on in some cases.

Curious to know what you all think about Jeremy?


r/ccna • • Aug 23 '25

Udemy CCNA 200-301 v1.1 Course

0 Upvotes

I'm glad I bought this course I like your approach to getting your students interested in Networking

with Packet Tracer. You don't bore us with theory I've tried other coursed and they drain you to the point

you don't want to learn any more. Please keep up the good work awesome job.


r/ccna • • 20d ago

Network Tool

0 Upvotes

Looking for 3–5 network engineers and CCNA/CCNP learners to test NetDocAi

I'm building NetDocAi, a tool that turns Cisco network configurations into structured documentation and highlights potential configuration issues.

I'm opening a small Phase 1 beta and looking for a few people who can test it and give honest technical feedback.

You would help me evaluate:

Configuration analysis and technical accuracy

Interface, VLAN, routing and security summaries

The usefulness of findings and recommendations

Report saving, history and PDF export

This is an early beta, so I'm looking for constructive feedback—not just positive reviews.

Interested engineers here https://net-doc-ai.vercel.app

Thanks to everyone willing to help improve it!


r/ccna • • Feb 24 '26

Struggling with OSPF on the CCNA?

7 Upvotes

If you’re studying for the CCNA and your OSPF labs keep failing, you’re not alone. Small mistakes--like mismatched area IDs or incorrect network statements--break everything.

After 35 years in networking across Egypt, Saudi Arabia, and Europe, I’ve seen the same five errors again and again. Here’s how to fix them before exam day:

1- Area IDs are per interface, not per router

If two ends of a link are in different areas, neighbors form--but no routes exchange.

2- Loopbacks advertise as /32 by default

That’s normal. It’s how OSPF treats host routes. Use ip ospf network point-to-point only if you need the subnet mask preserved.

3- The network command matches interface IPs--not subnets

network 192.168.1.0 0.0.0.255 area 0 enables OSPF on any active interface in that range. A host mask like 0.0.0.0 only matches one IP.

4- Timers must match

Hello/dead intervals must be identical on both sides. Mismatches cause adjacencies to drop silently.

5- OSPF doesn’t auto-summarize

Every subnet is advertised individually. Summarization only happens on ABRs--beyond CCNA scope.

6- Use clear ip ospf process to reset adjacencies

After changing OSPF settings--like interface priority, network type, or area ID--the router may not apply them until the OSPF process restarts. Running clear ip ospf process forces a full neighbor reset and re-election of DR/BDR, ensuring your changes take effect immediately. Always confirm with show ip ospf neighbor afterward.

Before calling OSPF “broken,” run through this checklist:

* Are interfaces up?

* Do both sides share the same area?

* Is the network statement correct?

* Are timers matched?

* Is the router ID unique?

* Did you clear ip ospf process after making changes?

I’ve shared a free CCNA 2026 Checklist with validation steps used in real labs.

Fathalla Ramadan

Network Architect & Educator

Note: Revised post addressing overlooked points, thanks for the sharp eye, and aligned with group benefits.


r/ccna • • Sep 18 '26

What CCNA or networking concept took you the longest to finally understand?

0 Upvotes

I’m trying to learn which topics beginners struggle with most, especially the ones that are usually explained in a way that feels more complicated than necessary.

For me, I’m interested in things like subnetting, VLANs, routing, DNS, switching, and troubleshooting.

What topic took the longest before it finally clicked for you?

And what explanation, lab, or real-world example finally made it make sense?


r/ccna • • Jul 24 '26

Subnetting Finally Made Sense When I Stopped Using Shortcuts

2 Upvotes

Subnetting can feel frustrating because many tutorials introduce shortcuts before explaining what is actually happening.

What helped me was understanding the relationship between the subnet mask, network bits, host bits, block size, network address, broadcast address, and usable host range.

My practice process is:

Identify the prefix length.

Calculate the subnet mask.

Find the interesting octet.

Determine the block size.

Locate the network address.

Find the broadcast address.

Calculate the usable range.

Only after understanding this process did shortcuts become useful.

My suggestion is to practice a few questions every day rather than completing dozens once a week. Try solving them without a calculator and then verify your answers.

Subnetting becomes easier through repetition, not by watching the same explanation repeatedly.

What subnetting trick or method helped you the most?