r/castboolits • • Jun 23 '25

Pistol Probably my prettiest batch so far

Thumbnail
gallery
119 Upvotes

Lee 356-120 TC 6 cavity mold, #2 alloy, ~670°F casting temp


r/castboolits • • Apr 12 '26

350lbs so far out the berms

Thumbnail
gallery
100 Upvotes

Just got done with another melt about 150lbs and after melt I got 102 lbs. plan is to get 500-750lbs to stockpile. What do yall do with the jackets they are starting to pile up on me


r/castboolits • • Nov 19 '20

Got my lead level test results. An involved and semi coherent post.

97 Upvotes

Context:

I’m 40-ish years old. And have been casting lead since I was 10. The early years were casting sinkers, melting potentially stolen roof flashing into ingots, (my dads a peach) and making bullets for my dads smoke poles. Probably only a few hundred pounds, with zero regard for lead exposure safety. “It makes your dick hard.” Was something my dad would say... (I did say he was a peach)

In my early 20’s I started casting for myself. Since then, I’ve poured thousands of pounds of bullets and ingots. I’ve got about 190 pounds of range scrap on the porch (covered porch, think 1850’s) And a couple thousand pounds of ingots in the basement. (Giggidy)

Oh, and 72 non-fishing moulds to eventually pour it all into. Plus a shotmaker for next spring, I can’t wait. Excepting the cost of electricity, 90 pounds of free #7.5 shot an hour.

In this entire time I’ve cast almost exclusively with no dust mask or respirator. Only this past year have I worn a dust mask because of the space herpies going around. (Three tests so far, all clear)

A lead level of 10 is concerning. A level of 44 is required before they start actively doing anything to reduce it (lead poisoned).

So, after years of no face masks and barely washing my hands, I’m a 4. That’s right. A four.

So why is that? First off I’m careful to have something on top of the melt, that reduces oxygen turning molten lead into lead oxide.

Next, the pots should never get hot enough to actually boil the lead. That smoke coming off the pot? It’s not lead vapor. It’s just shit burning. Yes, a breeze can push oxides off the surface and that is potentially deadly stuff. You see yellow smoke? That is literally lead oxide, in dangerous quantities. That will fucking kill you. You’re doing something seriously wrong. Anything bright yellow, or yellowish is lead oxides. Don’t breath it, for fuck sakes don’t eat it. But it is pretty sweet. But don’t eat it.

Skimming lead after melting weights, or scrap? Wax. CLEAN sawdust. Not plywood dust, not OSB dust. Clean soft or hard wood sawdust. Stir the pot, I’ve got a huge ladle, barely fits in it. I add my flux, and stir and pour for minutes at a time. I scrape the bottom and the sides. When I’m done there are jackets, steel clips, dirt, and black crust on top.

Light grey is oxides of tin or antimony. The shit you want. Unless your alloy is harder then a preachers dick, add more flux and stir and pour. The carbon in the flux reacts with the oxides. It strips the oxygen off, and the products are carbon oxides, (di or mono) and metallic lead, tin, or Antimony. Which is what you want. You should be left with very little grey, and some black crap.

As I cast I keep sawdust on the melt top. It keeps oxygen away, and constantly reacts to reduce any oxides that do form. And it floats on the top. I move it to the side, add my sprues, and put it back. I use a cheap 1/2” steel wood working chisel.

Natural lead removal. This isn’t my wife’s natural oils tripe. This is science (two hands and a rainbow) motherfucker.

Orange juice. Natural lead chelation. That means it naturally strips lead out of your body. I drink a few cups a week.

Spinach. Okay, I won’t touch it with a stolen dick. But it’s a great natural way to remove lead. So if you like it.... good for you.

Cast outside. Have the wind blowing smoke and potential dust away from you. Have ventilation if you’re cool enough to cast indoors. If you can smell it in the next room, you’re fucking up.

If you use dry media to polish brass, separate it from your brass outside. That is covered in lead oxides. It’s more lead poisoned then lead bars! I use a wet tumbler now. It’s more work, but I pop the primers out beforehand on an old rock chucker, wet tumble with pins. Lube and resize on the Dillon. Then dry tumble in corn cob. I like my brass shiny.

Avoid ranges with no or little air ventilation. If you can smell gun smoke before you enter the “hot” range area, they are fucking up.

I cannot stress powder coating enough. Taking a model 13 and model 10 heavy barrel and shooting powder coat in one, and lubrisized in the other was eye opening. My hands were greasy from lube, there were globs of it on the target from up close and personal work. And the handgun looked like my proctologist found it next to my polyps.

The powder coated revolver looked like it had been shot, alittle. The barrel was grayish. But it wasn’t greasy or funky at all. Less smoke, and since there was zero exposed lead, much less potential for lead exposure. However, most of your lead exposure is from the lead compounds in the primer. So there is still lead. Don’t comically inhale the smoke from your gun barrel and blow it at your friends. It tastes terrible, and can make you dumber-er....

However, in my limited use of powder coated bullets I will say the lubed ones “seem” more accurate. Now, not terribly so. But I seem to have the occasional flier from a one inch group that’s an inch or two away. Now that could be me. And I’ve only shot a few thousand coated bullets so I may find out I was doing something wrong.

Anyways. Don’t eat lead, don’t eat or smoke crack while casting, don’t touch your vagina or your mangina while casting or slowly touching your ingots, and don’t boil it.

If you can smell it, taste it, or see yellow, don’t let it mellow. Move upwind, and turn the pot down.

Holy shit. These old diet pills I found are fantastic for my concentration.


r/castboolits • • Feb 22 '24

Shotgun This morning I found 174lbs of Lead wheel weight ingots on FB Marketplace for $25 ($0.14 per lb). It was $55 with the ammo cans ($10ea) and I gave him $60. Lead pencils $14 @ Hobby Lobby to test BHN.

Post image
93 Upvotes

It was an old timer that casts .38s & .45s who said he's been sitting on these for 15 years. The pencils range in every size from 2H to a VERY soft 9B (6B = 4 - 5 BHN). He marked "W" on the ingots for Wheel Weights but they look like a "3"....LOL. His garage was a reloaders dream!!!


r/castboolits • • Oct 17 '26

Son got another one

Thumbnail
gallery
92 Upvotes

Ky Youth rifle season is in session so my and my 11 year old son went the property to fill the freezer. This was shot with a Ruger American ranch Gen2 in 7.62x39 with a AB A10 silencer at 30-40 yards. Using the NOE 310-165 shallow HP powder coated with an aluminum gas check sized to .310 over 25grn Varget I call this my freedom load because it goes 1776fps, he hit a little far back for my liking but he is 11 and got excited and it did the job.


r/castboolits • • Jan 22 '21

My favorite flower

Post image
85 Upvotes

r/castboolits • • Apr 06 '21

50 pounds of lead seems like a lot until you get it all stacked up.

Post image
76 Upvotes

r/castboolits • • Mar 20 '26

Powder Coating Look what ya’all did

Post image
74 Upvotes

After my post a couple weeks ago showing my (then new) RCBS baby Keith (357) mould/bullets, a conversation began about powder coating.

So, in my usual ADHD way, I hyper-focused and started learning about the new and hip ways of doing it (my knowledge up to that point involved putting them on an electrically charged mesh and spraying with a powder gun).

So, 20 hours of YouTube and forum post reading, some black airsoft BBs, upgrading my kitchen toaster oven (and stealing the old one), a yogurt tub, metal mesh tray, some ThePowderCoatStore Gloss Red and Shiny Black, and VIOLA!

This is my 2nd batch. A little warbly, but I think they’ll shoot well enough. Thanks everyone for kicking me in that general direction.


r/castboolits • • Dec 25 '22

Show and Tell When it's -3 but your new hollowpoint mold came early for Christmas

Post image
73 Upvotes

r/castboolits • • Aug 20 '24

Rifle One evening’s effort.

Post image
68 Upvotes

Some food for the High Wall 40-65. 400 grain Saeco.


r/castboolits • • Mar 30 '21

Looks like the growth of this sub is starting to go exponential.

Post image
67 Upvotes

r/castboolits • • Sep 10 '25

Powder Coating 9mm 148gr SWC's

Thumbnail
gallery
66 Upvotes

3.2gr Green Dot or 3.0gr 700x. Eastwood Ford Light Blue & Olive Drab 🫒


r/castboolits • • Feb 18 '26

620 rounds of 45 colt from wheel weights

Post image
64 Upvotes

First time casting. I have a friend that manages a tire shop so I have a hook up on wheel weights. Got 3 five gallon buckets of them for free. The majority of one of them were the clamp on lead ones, one was mostly stick on lead, and the other was mostly junk. I grabbed around thirty pounds of the clamp on lead weights and made these today. Kind of relaxing once you get in the groove.


r/castboolits • • Mar 19 '24

Purple people eaters

Post image
64 Upvotes

Really diggin this Sinbad purple from prismatic powders


r/castboolits • • Sep 03 '20

First time smelting range scrap into ingots, I'm hooked on this hobby!

Thumbnail
gallery
64 Upvotes

r/castboolits • • Jul 17 '23

Lead reclamation target

Thumbnail
gallery
63 Upvotes

Catches quit a bit of lead.


r/castboolits • • Aug 15 '22

Got Lead?

Post image
62 Upvotes

r/castboolits • • Dec 26 '20

Cast load in the 7.62 x 54r.

Post image
62 Upvotes

r/castboolits • • Jul 16 '25

First successful batch of 45cal bullets!

Thumbnail
gallery
61 Upvotes

Still have some ways to go in terms of practice and getting great/consistent casts. Tips are appreciated!


r/castboolits • • May 18 '24

Show and Tell I DID IT GUYS!

Post image
61 Upvotes

After a year of gathering and wait I loaded some 45-70 gov. My first load


r/castboolits • • May 07 '21

Feels like printing money right now.

Thumbnail
gallery
61 Upvotes

r/castboolits • • Apr 12 '23

Show and Tell The forbidden Toblerone!

Post image
59 Upvotes

r/castboolits • • Jan 03 '23

Rifle My first few rounds of .577/ 450 after a year and a half of planning.

Post image
59 Upvotes

r/castboolits • • Nov 11 '20

I was running low on 9mm and 38spl projectiles so 6hrs later I have probably about 2500 freshly cast and ready for powder coat. The mold used is a mp 359 125grn. NSFW

Thumbnail
gallery
59 Upvotes

r/castboolits • • Aug 13 '26

First cast 45-70 from range scrap.

Thumbnail
gallery
58 Upvotes

Well, first casting ever actually. It took awhile to get the temps right and a bit longer to hit the holes. I have a lot of respect for those of you who can do more than a double mould.

The first few were pretty wrinkled, but once I got the pace and temperature right, there were more keepers than not.