r/cachyos • • 1h ago

Help Sometimes when locked, brightness goes down to ~50% but reports back as 100%

1 Upvotes

When I leave my computer but plan on returning soon after, I lock the session with Super+L and then ESC so it doesn't constantly render my animated wallpaper. If I return to my computer within a few minutes it's fine, but if I'm gone for any longer my brightness goes down to what looks like about 50%. System Settings -> Display & Monitor -> Display Configuration reports brightness as 100% though.

Using KDE on Linux 7.3.4-1-cachyos.


r/cachyos • • 1h ago

Help logged out after shelly updates

2 Upvotes

For the past few days, whenever I install updates via Shelly GUI, I get logged out of CachyOS. Is this happening to anyone else? Or false settings?!


r/cachyos • • 1h ago

Desktop Linux Apprecitation

Thumbnail reddit.com
1 Upvotes

r/cachyos • • 1h ago

Desktop Day 5 in CachyOS, how's the desktop coming together? :)

12 Upvotes

Using Caelestia shell


r/cachyos • • 2h ago

Desktop Dual Booted CachyOS With Windows; First Time Linux User

2 Upvotes

Hello! I am a first-time Linux user who just migrated from Windows. I would have loved a full OS swap, but a lot of my important files are on Windows, and since I have two drives, I decided I may as well switch to Linux. Prior to this, I tried out (on a VM) Ubuntu, Debian, Fedora, and of course, CachyOS. Debian and CachyOS were my favorites. I loved Debian's simplicity, but I also got to tinker around, and it was surprisingly fast especially since all other distros were slow on my VM. However, I decided I wanted to do more, as my VM was very limiting, so I decided to dual-boot. I chose CachyOS because of how optimized it is for gaming, and I love tinkering and customizing things to a T.

The reason I even switched from Windows is because Windows was very limiting, and without third-party modifications like Windhawk, I couldn't customize much. Not to mention, I got 40–50% RAM usage on Windows with my browser and apps open, while I get ~26% on CachyOS with the same apps open (and then some).

As you can see, I am using GNOME. I know it's odd to see Arch combined with GNOME, however, I couldn't figure out how to make KDE look "better," and Hyprland... didn't work. Every time I tried Hyprland on both my VMs and my actual desktop, I always encountered a huge scaling issue where I would be extremely zoomed in and effectively couldn't fix it. It was the same as having no display. GNOME looks very simple and very familiar because I am used to taskbars, and I love top bars (which weren't an option on Windows). I don't know how I can beautify my desktop further, nor do I know how to make my standard terminal look good like those posts online of people showing off their god-gifted desktops.

That is basically all. I don't have much else to say, and I apologize if some things look strange or are weird combinations. I don't really know Linux THAT well since I used a lot of Gemini combined with reading documentation it's how I even got to dual-boot (I am 13 FYI, and I want to spend my time having fun).

If anyone has any recommendations on what I can do next, please let me know. I know I'm not using Linux to its full potential, which is why I need help from the best.


r/cachyos • • 2h ago

Question Real talk: Is there actually a way to get a massive performance boost (20%+) on CachyOS, or are minor tweaks just placebo?

21 Upvotes

Hey everyone,

I’m running CachyOS on a laptop setup (Lenovo LOQ, Ryzen 7 7000HS series, RTX 4050, 24GB RAM, 1TB SSD) and while the system already runs great and feels super snappy, I keep seeing people posting about random micro-tweaks or kernel flags promising "huge performance gains."

Most of the time when I test them (like those random GPU/modprobe tweaks), it's either a total placebo or yields maybe a 2–3 FPS difference in benchmarks.

I’m not talking about minor 5–10 FPS or 2% improvements here. Is there actually a proven, heavy-hitting strategy, kernel parameter, or optimization combo on CachyOS that genuinely pushes performance significantly higher (like a real 15–20%+ jump in games or heavy loads), or is this hardware already maxed out by default and everything else is just snake oil?

Would love to hear what you guys have actually tested and verified on similar modern laptop setups. Thanks!


r/cachyos • • 4h ago

Review Didn't use the computer for 3-4 weeks ish

24 Upvotes

I had 410 Updates! I almost went panick mode after doing the update, then rebooted. Everything went smooth.

Sure, I have an AMD CPU & GPU, maybe that helped a bit in the way. But it's truly amazing how stable Cachy OS is.


r/cachyos • • 5h ago

Question Running FreeCAD

0 Upvotes

I've broken into learning 3d modeling and FreeCAD is a great option to try. However, it refuses to run without opening it through terminal and running a command beforehand, which is then followed by a bunch of errors about fonts. Anyone able to help? I found the preload code on another forum, but its just frustrating to have to do this every single time. I don't really care about the font errors unless they're important (I don't think they are).

❯ LD_PRELOAD=/usr/lib/libdrm_amdgpu.so.1 ./FreeCAD_1.1.4-Linux-x86_64-py311.AppImage
FreeCAD 1.1.4, Libs: 1.1.4R20260928 (Git shallow)
(C) 2001-2026 FreeCAD contributors
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.

Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 19: invalid attribute 'xsi:nil'
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 20: invalid constant used :
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 23: invalid constant used : monospace
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 42: invalid attribute 'xsi:nil'
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 43: invalid constant used :
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 46: invalid constant used : sans-serif
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 68: invalid attribute 'xsi:nil'
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 69: invalid constant used :
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 72: invalid constant used : serif
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 88: invalid attribute 'xsi:nil'
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 89: invalid constant used :
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 92: invalid constant used : emoji
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 108: invalid attribute 'xsi:nil'
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 109: invalid constant used :
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 112: invalid constant used : math
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 120: invalid attribute 'xsi:nil'
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 121: invalid constant used :
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 124: invalid constant used : system-ui
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 132: invalid attribute 'xsi:nil'
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 133: invalid constant used :
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 136: invalid constant used : cursive
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 144: invalid attribute 'xsi:nil'
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 145: invalid constant used :
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 148: invalid constant used : fantasy
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 156: invalid attribute 'xsi:nil'
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 157: invalid constant used :
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 160: invalid constant used : ui-sans-serif
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 168: invalid attribute 'xsi:nil'
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 169: invalid constant used :
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 172: invalid constant used : ui-serif
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 180: invalid attribute 'xsi:nil'
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 181: invalid constant used :
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 184: invalid constant used : ui-monospace
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 192: invalid attribute 'xsi:nil'
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 193: invalid constant used :
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 196: invalid constant used : ui-rounded
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 204: invalid attribute 'xsi:nil'
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 205: invalid constant used :
Fontconfig warning: "/etc/fonts/conf.d/48-guessfamily.conf", line 208: invalid constant used : fangsong
Fontconfig warning: "/etc/fonts/conf.d/48-spacing.conf", line 14: invalid constant used : monospace
Fontconfig warning: "/etc/fonts/conf.d/49-sansserif.conf", line 10: invalid constant used : serif
Fontconfig warning: "/etc/fonts/conf.d/49-sansserif.conf", line 18: invalid constant used : sans-serif
Fontconfig warning: "/etc/fonts/conf.d/49-sansserif.conf", line 26: invalid constant used : monospace
Fontconfig warning: "/etc/fonts/conf.d/49-sansserif.conf", line 34: invalid constant used : emoji
Fontconfig warning: "/etc/fonts/conf.d/49-sansserif.conf", line 42: invalid constant used : math

r/cachyos • • 5h ago

Question Any cleaner app to not get my root partition full?

17 Upvotes

Hi, it's been some months since I switched to Cachy, great experience overall, but my root partition (which is 100GB, only for the system, my personal files are placed elsewhere) is getting full update after update. I think it may be all those libraries that get updated every now and then, but I don't know really. Is there any app that can help me free some space up there?


r/cachyos • • 6h ago

Question Is there a downside switching from limine to grub?

5 Upvotes

I've been using Cachyos for while now and suddenly im having issues with limine getting stuck on black loading screen, i google the issues and look it up on cachywiki/forum and the culprit was plymouth so just remove it base on the instruction and now everything is white, so should i just switch to grub or is there a fix for this?


r/cachyos • • 10h ago

Bug Report KDE Connect: Android → Linux file transfers fail with FlClash System Proxy enabled (CachyOS workaround)

Thumbnail reddit.com
1 Upvotes

r/cachyos • • 11h ago

Help Performance Issues on Nvidia RTX 5080

2 Upvotes

I'm new to Linux for the most part, I run an Unraid server with a bunch of containers on a different machine, and I work in the IT field mainly through Windows and Mac environments. I decided I was finally done with Windows and made the switch last night to CachyOS. I love it so far in everything but my main use case on my gaming pc... Gaming. It works fine and I get good frames, but it freezes CONSTANTLY. I play CS2 at like red rank levels and it's just unplayable now unfortunately.

I've tried launch options like: SDL_VIDEODRIVER=wayland %command% -vulkan but no luck. I've tried different nvidia drivers, and I have LACT and the setting for prefer maximum performance on the card. In CS2 specifically I get a warning about my 240HZ 4k monitor showing up as a 0Hz monitor whenever I open the game. But even War Thunder has a ton of issues with the constant freezing and microstutters.

I'm hoping this isn't just an nvidia issue because I really don't want to go back to Windows. Any ideas to try? I've tried a bit of AI troubleshooting, but I don't think any of it was really doing anything because AI can be worthless with this stuff sometimes.


r/cachyos • • 12h ago

Question Has anyone had success increasing the amount of available ram?

0 Upvotes

I am using linux to run y-cruncher and stressapptest and i want to be able to test as much of the ram as possible.

Currently after boot around 1.4 GiB is reserved by the kernel itself and another 1.6 GiB is reserved by other stuff. I am running XFCE4 so it should be lower imo.

I am currently using the Arch Linux kernel. I did try a cachy-os kernel earlier but it did not help me utilize more of the ram for stresstesting (that was a while ago though).

You can test more ram with memtest86+ but that's not a very effective test.


r/cachyos • • 12h ago

Review One year no re-install

Post image
153 Upvotes

I have been using Cachy for about two years. Finally have a machine I haven't re-installed on in that time.


r/cachyos • • 13h ago

Question Desktop mode bootloop

2 Upvotes

Hello using catchyOS handheld on steam deck switching to desktop mode causes boot loop has this been fixed yet so I can do a reinstall ?


r/cachyos • • 13h ago

Desktop AntiGravity

0 Upvotes

Any cool things one could do with AntiGravity? I tried tweaking some desktop settings and some scripts with horrid results, and didn't realize there was a limit to use. But I am intrigued. It does not play nice with tmux, at least in my experience.


r/cachyos • • 14h ago

Help Why is this keep happening

Thumbnail
gallery
1 Upvotes

I have both windows and cachyos

But when i run cachyos it stays at that loading screen for about 1min and then that blue screen (the QR code says that it'sa gpu failure i have Amd) i always press ctrl+D to continue

Please someone explain this to me


r/cachyos • • 15h ago

SOLVED Anyone gotten an RK C87 HE working with OpenKey or native Linux configuration?

Thumbnail reddit.com
1 Upvotes

r/cachyos • • 16h ago Bravo

SOLVED HUGE PERFORMANCE UPLIFT FOR RDNA4

192 Upvotes

so i put options amdgpu moverate=0 in /etc/modprobe.d/amdgpu.conf (and rebuilt initramfs + rebooted) and honestly the difference is wild. games feel way more responsive with noticeably less input lag, and in deadlock on latest ge-proton via vulkan i went from 250-430 fps straight up to 350-600 fps (9800x3d + 9070 xt + cachyos kernel 7.4). From what the kernel docs say this removes the driver bottleneck on buffer migration speed between ram and vram, can someone else test this out on their setup and let me know if im tripping or if its actually legit?

If you're not how to do this there is a guide

  1. Create conf file -> sudo nano /etc/modprobe.d/amdgpu.conf

  2. Add this -> amdgpu options moverate=0 and save and exit

  3. Rebuild initramfs by doing sudo mkinitcpio -P and restart computer.

  4. Play , i suggest to test on cpu heavy games like cs2, dota or deadlock.

Can someone confirm i'm not tripping ?

it would be nice if this value is exposed / implement in windows registry too in future. Its so much smoother than Windows even without it , but once i've add this, everything feels super coherent

Please tell me i'm not alone


r/cachyos • • 17h ago

Question Auto app uninstall (right click menu)

0 Upvotes

Hey! I thought that it could be cool to be able to uninstall apps by using the right click menu button? I had a couple tryes and the vibe coded v0.02 uninstalls multiple types of apps that would have needed to be deleted manually and using a couple commands. I feel like it's not something essential - but I began my CachyOS journey, literally 2 days ago and I am in the process of trying many Many different apps and I am loving every second of it.

I am a frequent user of apps like ditto, everything and many others like start11 and so on, and so on.

The Question I have, is - does anyboxy except myself need this particular QOL app? If so, I can post it (I just want to feel the waters, as I don't really know if this stuff even merits a github project in current landscape)

Thank you to anybody in advance.


r/cachyos • • 17h ago

Question Automatic app uninstall (from right click menu)

1 Upvotes

Hey! I thought that it could be cool to be able to uninstall apps by using the right click menu button? I had a couple tryes and the vibe coded v0.02 uninstalls multiple types of apps that would have needed to be deleted manually and using a couple commands. I feel like it's not something essential - but I began my CachyOS journey, literally 2 days ago and I am in the process of trying many Many different apps and I am loving every second of it.

I am a frequent user of apps like ditto, everything and many others like start11 and so on, and so on.

The Question I have, is - does anyboxy except myself need this particular QOL app? If so, I can post it (I just want to feel the waters, as I don't really know if this stuff even merits a github project in current landscape)

Thank you to anybody in advance.


r/cachyos • • 19h ago

Question Clarification on how to automount Drive on Start

11 Upvotes

I am making this post just to double-check if the instructions I found are really what I need for what I am doing. I'm running a dual-boot PC with 3 Drives: Windows OS, CachyOS, File Storage.

I mainly use the File Storage as a shared drive for files, videos, and other things I need to access when I am using either OS, so that I don't have to duplicate everything. (Storing text files so I can edit them on either OS).

These are the instructions that I found:

  • Open KDE Partition Manager from your application menu. 

  • In the left panel, select your storage device / drive. 

  • In the right panel, right-click the specific partition you want to auto-mount and select Edit Mount Point. 

  • Set Identify by to UUID. 

  • Choose a Path for the mount point (for example, /mnt/Files or /mnt/datadrive). 

  • Check the following safety and permission options:

    • Don't prevent the system from booting if not mountable (nofail)

    • Users can mount and unmount

    • (Optional) Enable exec if you plan to use the drive for a Steam library or running applications. 

  • Click OK, then click the Save changes (green checkmark) button on the main toolbar. 

  • Open a terminal and run the following commands to apply the configuration immediately: sudo systemctl daemon-reload sudo mount -a

I never did this before; until now, I just manually mounted the File Storage drive whenever I used CachyOS. So I am a bit unsure what the "Choose a Path for the mount point" does exactly.

I do have a mnt folder in my root, but that folder is empty.

Could someone clarify or just reassure me that what I am doing is what I am to achieve?


r/cachyos • • 19h ago

Help Display continuously disconnect / reconnects in multi-screen setup (KDE Plasma, amdgpu RX 9070)

1 Upvotes

Hey guys,

I've been happily using CachyOS for almost a year now, but lately I encountered a problem with my multi-monitor stetup I'm unable to solve on my own. I'm hoping for some helpful hints on how to proceed.

The problem: When I have 3 or 4 screens connected, at least one of the screens continuously disconnects and reconnects itself every few seconds. In KDE plasma "System Settings" => "Display configuration" there is then a notification:

An output has been removed. Settings have been reloaded.

Right after, it changes to:

A new output has been added. Settings have been reloaded.

In the attached video, you see this phenomenon around the 20 seconds mark.

Sometimes, the respective screen then disappears from the Display configuration window shortly, sometimes it just stays there while the display overview turns grey for a few seconds.

Almost everytime the disconnect/reconnect happens, the whole system lags for a short moment, often also temporarily resizing and/or changing the desktop wallpaper back and forth on one of the screens.

I already tried the following:
- disabling adaptive sync (on displays supporting it)
- setting the same refresh rate (60 Hz) on all screen
- disable HDR (on displays supporting it)
- uncheck brightness control with DDC/CI
- systemctl --user edit plasma-powerdevil.service => addingEnvironment="POWERDEVIL_NO_DDCUTIL=1"
- Using LACT to adapt the GPU clock (preset "Highest Clocks" and "Manual")
- Removing the kwinoutput config (rm -rf ~/.config/kwinoutputconfig.json)
- change DP/HDMI cables
- switch GPU ports for different screens
- use only 3 instead of 4 screens

When the issue happens, there are (at least) 2 things happening:

  1. journalctl --user -b -f shows "requesting unexisting screen available rect" and "requesting unexisting screen geometry" at lot of times (full log see https://pastes.io/YKJM1SPK in "Code" tab)

  2. kscreen-console shows the connected screens but adds the disconnected/reconnected screen with a new ID. (full log see https://pastes.io/8UHarmuU )

Any input on how to solve the issue is appreciated.

Kind regards,

the_smoker

--------------------

Hardware info
❯ inxi -b
System:
 Host: XYZ Kernel: 7.3.4-1-cachyos arch: x86_64 bits: 64
 Desktop: KDE Plasma v: 6.8.2 Distro: CachyOS
Machine:
 Type: Desktop Mobo: ASUSTeK model: ROG STRIX X570-E GAMING v: Rev X.0x
   serial: <superuser required> Firmware: UEFI vendor: American Megatrends
   v: 5044 date: 01/04/2026
CPU:
 Info: 16-core AMD Ryzen 9 5950X [MT MCP] speed (MHz): avg: 1746
   min/max: 582/5086
Graphics:
 Device-1: Advanced Micro Devices [AMD/ATI] Navi 48 [Radeon RX 9070/9070
   XT/9070 GRE] driver: amdgpu v: kernel
 Display: wayland server: Xwayland v: 24.1.15 compositor: kwin_wayland
   driver: gpu: amdgpu resolution: 1: 4096x2160~60Hz 2: 2560x1440~120Hz
   3: 3840x2160~60Hz 4: 3840x2160
 API: OpenGL v: 4.6 vendor: amd mesa v: 26.2.6-arch3.1 renderer: AMD
   Radeon RX 9070 (radeonsi gfx1201 ACO DRM 3.64 7.3.4-1-cachyos)
 Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
   de: kscreen-console,kscreen-doctor gpu: amdgpu_top,lact wl: wayland-info
   x11: xdpyinfo, xprop, xrandr
Network:
 Device-1: Mellanox MT27520 Family [ConnectX-3 Pro] driver: mlx4_core
 Device-2: Intel Wi-Fi 6 AX200 driver: N/A
 Device-3: Realtek RTL8125 2.5GbE driver: r8169
 Device-4: Intel I211 Gigabit Network driver: igb
 Device-5: Realtek RTL8153 Gigabit Ethernet Adapter driver: r8152 type: USB
Drives:
 Local Storage: total: 34.62 TiB used: 45.98 TiB (132.8%)
Info:
 Memory: total: 64 GiB note: est. available: 62.69 GiB used: 9.82 GiB (15.7%)
 Processes: 704 Uptime: 2h 10m Shell: Zsh inxi: 3.3.41


r/cachyos • • 20h ago

Help update failing because of corrupted or invalid package?

2 Upvotes

here is what the update konsole shows. im sorry this is a new one for me so i dont exactly have an idea on how to fix it on my own