9
u/DZComposer Oct 21 '15
This looks like an attenuator pad. In fact, it looks to be exactly the asymmetrical balanced circuit on that page.
It's a solution to the "This mic is so loud that the signal is clipping even with the preamp turned all the way down" problem.
6
u/CharlesStross Oct 21 '15
Yup; these are pretty common actually. I applaud the resourcefulness to make your own. The wiring box as a transparent flip case though... dunno about that one.
-5
u/DarthKane1978 Oct 21 '15
Found while cleaning this ClusterFuck (public access TV) http://imgur.com/a/fAAaO#0
1
1
u/whitcwa Oct 21 '15
Or to attenuate a line level signal to mic level.
It's odd that it's labeled with resistor values instead of DBs of attenuation.
4
u/einstein2001 Oct 21 '15
What's the problem here OP?
1
-1
u/one_up_hitler Oct 22 '15
There's no strain relief and the cable's bound to be jacked out of the box?
It's not a grade A solder job, but it'll get the job done.
-6
u/DarthKane1978 Oct 21 '15
Found while cleaning this ClusterFuck (public access TV) http://imgur.com/a/fAAaO#0
2
u/Dances_With_Boobies Oct 21 '15
Is it a microfon cable? I don't think it looks that bad, the resistors are probably placed like that to avoid interference
2
-6
u/DarthKane1978 Oct 21 '15
Found while cleaning this ClusterFuck (public access TV) http://imgur.com/a/fAAaO#0
2
u/Rowsdow3r Oct 21 '15
Looks like it might be an H pad.
-6
u/DarthKane1978 Oct 21 '15
Found while cleaning this ClusterFuck (public access TV) http://imgur.com/a/fAAaO#0
1
3
u/astern83 Oct 21 '15
Yeah, this is a pretty standard looking mic pad, not much fail here. Have a downvote.
-5
u/DarthKane1978 Oct 21 '15
Found while cleaning this ClusterFuck (public access TV) http://imgur.com/a/fAAaO#0
7
u/texasyankee Oct 21 '15
This isn't cable fail, it's /r/techsupportmacgyver from a time when you couldn't just go online and order what you need.