r/breville • • Aug 12 '23

Smart oven pro vs. Joule

34 Upvotes

Good morning.
I would appreciate if you can provide me with some input regarding these two models. I have been looking for a comparison and wondering if the extra cost is really worth it. Has anyone purchased the Smart Oven Air Fryer Pro? How does that compare to the Joule Oven Air Fryer Pro, besides the app?

Thanks for your input.


r/breville • • Sep 19 '26

Question Thoughts/Reviews

Post image
33 Upvotes

Hi I’m thinking of getting this toaster I live in a pretty small apartment so when I use my stove oven it gets super hot and I’m thinking this may replace my toaster and maybe my microwave which is in its last legs tbh

Any suggestions and or reviews would be so much appreciated

Edit: yes I know the photo says purchased but no I haven’t not bout it I was talking to one of my coworker who mentioned she had just got this and she sent me this screenshot of what she got

With a your comments though I’m pretty sure I’m getting it :)


r/breville • • Apr 27 '24

Toaster oven door spring

Thumbnail
gallery
32 Upvotes

Toaster oven door spring broke recently. I wasn't able to find much info anywhere on where to find a replacement spring so thought I'd post here for the benefit of others.

After having no luck at Home Depot or Walmart, I found these three options at Ace Hardware (about $3.99 each). Leftmost spring is the broken original. I ended up using the rightmost spring since it's overall length and tension was closest to the original.


r/breville • • Jan 06 '25

DIY bearing replacement on Hemisphere Control blender

22 Upvotes

We bought a Breville BBL605XL Hemisphere Control Blender back in 2013 and for the cost there is very little to complain about. Its been great. Recently though the bearing in the jug started to fail, which (from what I can tell by online research) is a typical problem. You'll start to notice a brown residue and rust stains on the underneath of the jug, where the drive socket is.

Annoyingly Breville does not make replacement parts available. They only offer the entire jug (including the blade assembly) at a fairly high cost ($100+). I found this unacceptable and was considering buying something else. I figured I couldn't make things worse than they already were so I started taking the jug apart.

This is fairly simple and requires minimal tools. A Torx T8 and a 4mm hex key got the entire blade assembly off. Getting the bearing off was a bit more involved. There is a retaining clip that needs to be removed (small c-clip). This is easy to pry off with a small flat-head screwdriver. Sorry...I did not document this with a photo.

To remove the bearing I used a drift and held the assembly upside down in a vise. I wish I had taken a photo of this...my apologies. At this stage I was still just taking everything apart for the Hell of it with no intention of re-assembling it. The grey plastic piece was above the vise jaws and the rest of the assembly (with the blades) dangled below the vise. A few sharp taps on the shaft pushed the bearing off the spindle.

Be careful with the tapping. If you mushroom the end of the spindle that will make it very hard to get a new bearing on! Now that I had everything apart I was determined to repair it. Finding the replacement bearing was surprisingly VERY simple. There is a code stamped onto it that tells you the size. The funny thing is its the same size used in many skateboard wheels! Mine said:

S608RS

Instead of buying a cheap bearing on Amazon I decided to go with something made for more industrial/precision purposes. Found it at McMaster Carr for under $30 shipped. Yes...this is a LOT for a bearing but a lot cheaper than a new jug or new blender. Here is the link if anyone is interested. SKF makes very high quality bearings found in lots of super fancy expensive stuff.

I used a 16mm socket and a hammer to "press" on the new bearing. I did this on a workbench with the blades facing down, on a piece of wood I didn't mind damaging with the points of the blades. Again, pretty straightforward. I lightly sanded the spindle with some fine grit sandpaper and used a sparse amount of WD40 as a lubricant to help get the new bearing onto the spinde.

I put everything back together in the right order and I have an operational blender again! If you attempt to do this just pay careful attention to the order of things when you take everything apart. Its hard to see in the photo above but there is also a very thin O-ring in between the round steel plate (under the drive gear) and the body of the jug.

Breville COULD offer a replacement blade assembly for a LOT less $ than a completely new jug. That is wasteful and not something I will support. I have encountered similar issues with my Infuser espresso machine. I'm on my third one now because Breville could not repair it...which I don't understand because presumably they still make these and parts should be available to Breville's repair depot. When this machine dies I'll buy something else with better service options. A discount on a new machine is all Breville was able to offer.


r/breville • • Dec 19 '24

Joined the club!

Post image
19 Upvotes

Recently got my breville barista pro still fine tuning, use beans from my local coffee shop (bodhi leaf) I was surprised that I have my current grind size at 13 on the dial and inside the hopper it’s manual set to 6. I don’t know why I always assumed it would be a lot lower (just based off what I’ve read from other posts and seen on videos) but getting a 36-38 gm shot from 18 gm of beans in 30-32 seconds and it tastes amazing. 🤩


r/breville • • Jan 26 '25

Super excited to try slow cooking with this bad boy!

Post image
17 Upvotes

I was honestly shocked to see it fit my 6.5qt Le Creuset wide round Dutch oven! What should I try cooking first?


r/breville • • Aug 28 '24

Breville BOV900 front heating element broken

Thumbnail
gallery
16 Upvotes

My Breville front heating element broke. I called Breville and they don’t sell the heating element part. Their solution? Ship the entire unit to them, wait 15 days for a diagnosis and pay them the labor and parts and then they ship it back. It’s like a 4-6 week repair cycle. That’s absolutely crazy! We use this thing several times a day with kids. No way we can wait that long.

When I called Breville they never picked up the phone. Ive called three times. I swear no one is working at this place. Last time I waited one hour and they hung up on me.

Awful customer service process and to top it off they have an awful offer for replacement. The only other alternative is 25% off a new one.

This company operating model sucks when you need their assistance.


r/breville • • Apr 01 '24

Don’t purchase a Breville Microwave

16 Upvotes

The soft close feature worked for less than 1 year, so that’s not good, but before 3 years the inverter went out making it totally useless. Breville offered to inspect the microwave and found it will be $335 to repair. I already purchased a brand new air frying combo microwave for $200 from GE, so that’s a hard pass.

I am severely let down on the lifespan of this $500 microwave and will be looking for a new favorite small kitchen appliance manufacturer. I just hope that my Breville toaster, electric grill, slow cooker and waffle maker all last longer.


r/breville • • Aug 10 '23

Breville Touch ER05 Espresso machine not starting up solved / How to Bypass Temperature sensor issue / Quick Fix 15$

16 Upvotes

Hi everyone I've had a very difficult time fixing this, by far I don't think I've seen a single normal post on the internet showing a complete set of options on how to fix this issue properly. Machine starts up but displays ER05 or ER07 on the screen and will refuse to start up. Ive fixed mine by replacing the small milk temperature head that measures the temperature of the milk when frothing with a small resistor. here's some things you can do to fix it.

  1. Buy a "Breville NTC Base Kit Assembly Kit" online which I guarantee you will not find anywhere. Other than Australia which does not ship to US. So I wouldn't recommend. Plus its 100$ after shipping.

  2. Contact Breville customer service and see if your machine is still under warranty. They will change it for you as they should or send you a part replacement.

3. *Probably your best option* Buy a 360 Ohm 1/8 Watt 5% Carbon Film Resistor from EBay and replace the tiny metal head that measures the temp with the resistor at the end of the wire. Use each end of the resistor and connect each end to each wire and use electric tape to tape it up. I inserted some pictures to give you an idea. You will need to disassemble a small skinny tray from the bottom of the machine on the right side. take off 2 screws, and then take off 4 screws off of the small circuit board. take a couple of pics before taking off to remember how everything was. total cost of fix was 15$ and took about 15min. After its taped up, make sure to put everything back and only then turn on the machine, otherwise it won't work. Only problem is you will have to froth manually not measuring temperature but at least you will have your whole machine working. and a cup of coffee.

4. Throw the machine away, this is an option I wouldn't blame you for because Breville has made it so frustrating to find any parts online.

Thanks and make sure to give a like if this helped you out :)


r/breville • • Jun 11 '25

The explosion happened to us!

Post image
15 Upvotes

The air fryer smart oven basically exploded about 20 minutes after we finished cooking. Luckily no one was around, and the majority of the glass remained contained. I just saw info about the old lawsuit and other stories of this happening to people. I was thinking about asking brevile to replace this, but I'm not really sure I want to have this model in my house again after experiencing this. Has this happened to anyone else?


r/breville • • Dec 31 '25

Question Breville smart oven steaming

12 Upvotes

Is the smart oven supposed to have a gap on the left side where steam pours out?


r/breville • • Nov 03 '25

Can I put items on top of my oven like this while on?

Post image
12 Upvotes

Hello friends, like the title of the post reads, can I put items on top of my oven like this while on?

They are all Breville items that would typically go inside the oven minus the cutting board.

  • bamboo cutting board

  • enamel broiling pan and rack

  • ceramic pizza pan

  • non stick pizza pan

From what I’ve read, this should be fine? Just wanna hear it from an experienced user.

Thank you!


r/breville • • Apr 09 '25

Other I spotted the prototype of a Precision Brewer 2 at the Amsterdam Coffee Featival

Post image
12 Upvotes

What I know Took the picture with my meta glasses couldn’t see every little thing in detail: -it has a removable water lid -for some reason it had an Australian plug -it will be adapted to use the same filters -they won’t make a glass version -to be realized sometime in 2025 -has more temperature control than the original -still can do cold brew -cone is slightly different


r/breville • • Nov 17 '23

Problem Breville Smart Oven power button starting to fail

12 Upvotes

Most of the time I have to press it more than once for it to start cooking.

I called Breville support, but they don't sell parts and it's out of warranty. They had no suggestions whatsoever to source parts to repair it myself or have someone else repair it, which is disturbing for a premium brand.

Any suggestions?

Model BOV800XL /A


r/breville • • Mar 21 '24

Loose washer on Smart Oven Air Fryer Pro fan shaft - Breville "moderated" my review - Won't own up to an engineering design flaw

11 Upvotes

Upon recommendations from BIFL subs, I got the Breville Smart Oven Pro in June of 2022. Despite some other minor annoyances like loose door seals and the random error code, I still like the machine and continued using it. Recently, however, it started making a very loud noise coming from the fan where it's practically not possible to use it.

Being an engineer, I took the cover off and discovered a loose washer spinning on the fan shaft between the motor and the interior fan. Like spinning a hula hoop on a stick. On the left side of video. To get the thing out of there would require taking the machine completely apart - not an easy task given how the inner fan is connected to the motor. Basically the entire thing would have to be completely torn down.

I left a detailed objective review about this issue on Breville's website, including a photo of the said washer and got back an email saying my review "did not meet their content guidelines". So much for that. I'll copy and paste below exactly what I wrote for anyone to judge.

I've tried going through the normal customer service channels to get them to warranty the oven since I've had it less than two years. Their response: they cannot find in their system the order number I've provided from when I bought the oven.

It is what it is, but I just want to put it out there for others considering this oven. It is far from a BIFL product. This particular loose washer problem is an issue that has been reported previously. It's clearly an engineering flaw. The machine has not been abused. When a company won't own up to something that minor, it doesn't inspire much confidence.

Copy of the review I submitted which "did not meet [their] content guidelines:"

Exhaust fan shaft washer lose. No response from company

We really loved this machine. It does most things extremely well. However, after about a year and a half of owning it, a fan motor shaft washer sandwiched between the fans and behind the motor came lose. It is making a loud rattling noise as the lose washer twirls around the spinning shaft. I'm an engineer by training and could probably take this entire thing apart to get to the lose washer. It would require essentially breaking the entire machine down to its complete bare bones because there's no easy way to pull out the motor shaft from the outside. But in any case, why should this be my responsibility? I would expect a machine in this price range to function a bit longer than a year and a half. We tried contacting the company without any luck. I tried attaching a video, but it won't let me link to the uploaded video.


r/breville • • Feb 26 '24

Breville barista touch stops every 3 seconds

11 Upvotes

Hello,

Just looking for guidance on next steps to take. I have descaled my machine three times because the barista stops brewing after three seconds. This is not due to the grind size because on descale the machine stops every three seconds as well. In addition, the frother and hotwater options only purge water for three seconds. What is the most likely issue with my breville barista touch and what should I do?

Thanks


r/breville • • Feb 11 '26

Other Breville Infizz Fusion Thoughts

9 Upvotes

I've been eyeing the Fusion for a year or so now.

Then a a month ago my Sodastream (the white model designed by Yves Behar) started leaking CO2 slowly and I decided to go ahead and purchase one.

It's a bit of an investment if you like having multiple bottles and sizes of bottles because it is not compatible with your old bottles.

It comes with a single 1L bottle and I bought 2 more as well as 2 of the smaller 0.6L ones so add ($60) for those and then I saw a lot of suggestions to get at least one more of the fusion caps ($32).

So you've got that plus the already more expensive price for base unit.

All in switching to it was about $370 USD.

---

The bottles seem really well made, they're noticeably thicker/stiffer than Sodastream ones and the base can be removed so you can clean sand and stuff out of there (every single one of my Sodastream bottles has sand trapped down there).

---

Another thing to keep in mind is that the internals are still plastic as far as I can tell despite the outside being stainless. It's certainly constructed nicely but I wouldn't call it "all metal" or anything like that which I've seen a few people imply.

---

For those who like to use alternate CO2 sources...

I've been using 20lb CO2 bottles with my Sodastream for a number of years now now so I also had to buy a new conversion hose for that since the coupler for the CO2 is also different from my old Sodastream.

I didn't have to modify it to get the hose on like I did with my Sodastream, but I did have to disassemble the base so I could get my hand in far enough to connect the hose. The plastic internals were quite visible at that point but the disassembly was easy and it went back together again easily as well.

I did hollow out a little bit of the plastic part of the base to make room for the hose to exit, but you could alternately put it on a small piece of wood or something with an exit for the hose hollowed out there instead.

---

From a carbonating standpoint it seems to do a good job.

With cold water, I can push the lever twice and it'll carbonate things as well as my Sodastream did with 3 pushes. I do kind of miss the burp noise my Sodastream would make, but that's just nostalgia...

It does make a sort of poof noise on the first push, subsequent ones don't which is too bad, I've been just counting to time my second push since it doesn't provide the audible feedback the first push does.

The put on cap then insert into the unit process has a very small learning curve and if you just remember to sign up the triangles on the cap and unit it's easy enough.

And yes, it successfully carbonates things other than water! Yay! I've not used this feature a ton yet, but what I've used it on it worked well and the Fusion caps have worked great.

Speaking of the Fusion Caps there's a little valve switch in them with you can use to carefully let out the pressure which is especially important when you've carbonated things other than water and it works well.

---

Is it worth it? That's hard to say, I'm happy with it. I like how it looks and works, and while you can find other choices that will carbonate anything I don't think they look as nice and I've been pleased with our other Breville kitchen stuff (We have their Microwave, a Toaster oven, and their Tea Maker which I freaking adore).

So after a few solid weeks of using it I'm happy so far.

If something longer term happens to change my mind I'll try to come back here and update this.

Also happy to answer any questions you might have about it.


r/breville • • May 18 '26

Finally! Got One That Works.

Thumbnail
gallery
8 Upvotes

After two warranty claims, I can finally grill cheese.


r/breville • • Feb 20 '26

Problem Smart Oven Pro Air Fryer, Defective, Sent Back, Then Destroyed.

8 Upvotes

Our brand new smart oven pro air fryer, purchased from Sur La Table, began getting a blank control panel within one week.

It continued and when we reached out to Sur La Table, we had missed the return by one day. Breville customer service sent a box, we carefully packed it up in the cardboard supports for all corners, sent it back and it came back today.

The oven is destroyed. The handle is smashed and torn off the oven, it is dented all over. They didn't pack it in the box, they just put it in the box. No packing material but bubble wrap.

Customer service agents are always offline during operating hours and you can't get through customer service.

I want my money back . I don't want to deal with a company that treats customers like this. This oven was brand new. https://www.youtube.com/watch?v=47UpBECH4Io


r/breville • • Jun 25 '25

Flickering static on Smart Oven Airfryer

8 Upvotes

Hi! It's only my second time using the Breville Smart Oven Airfryer today. I was roasting chicken and nearing the last 13 minutes, I noticed flickering "light" which I assume is static on the top cover of the oven and also on the door handle. See video below. I'm referring to the "dancing light" you're seeing throughout the video. The video isn't edited! That's exactly what I saw with my two eyeballs 😭

I turned off the oven, unplugged it. After around two to three minutes, the "light" was gone. I tried looking for posts with a similar observation but to no avail. What is this? Is there an issue with my oven? I have contacted support and am awaiting reply.


r/breville • • Nov 26 '24

Question Breville Joule Oven Air Fryer Pro

Post image
8 Upvotes

Hello friends! Adding to my Breville collection (have the Breville Barista Touch Impress Espresso Machine at home). I’m currently living in a hotel for the next 6 months for work and just bought the Joule during Crate & Barrel’s sale. What are your tips, tricks and or favorite things to make using the Joule? 🍽️😋


r/breville • • Nov 26 '22

Startup Error 05

8 Upvotes

Hi there!

I purchased a Barista touch about 6 months ago from the Breville amazon store. I love it. So much so, that I'm devastated I can't get it to work. All was fine, we used it a few times a day and cared for it. Out of no where it started demanding we contact customer support with the start up error code ER05. I can't bypass this screen.

I have tried calling Breville during their operating hours several times without any one available to answer my call. I've sent emails and tried chatting with the support chat bot on the site. And I have a ticket open but no one is getting back to me.

My issue is that I can't just send it in for a technician to asses it. I imported it to Costa Rica, and paid 100% import tax plus insane shipping. it will literally cost me more to ship it back and import it back into Costa Rica, than buying a new one. I don't want to do this,

I'm hoping someone at breville will see my message here and reach out. What can I do? Is there a way to bipass this error code? I love my frothed milk, but I'd be happy with just pulling a shot of espresso in the morning, (There's very little info online, but everything I've seen is pointing to the issue coming from the temperature sensors from the milk frothing are.

help me please. I'm lost without my coffee, and my relationships are on the line. No one likes me uncaffinated. And I don't like anyone either.


r/breville • • Jun 28 '26

Question New model smart oven air fryer pro or new model?

Thumbnail
gallery
7 Upvotes

I got this Breville Smart Oven Air Fryer Pro brand new in box for $150 on FB marketplace and thought it was just an older model, but I was reading the older models have an orange light and newer ones have a red? Is this a newer model?


r/breville • • Sep 02 '25

New out of the box sage/ breville the smart oven pro: is this noise coming from the fan normal? It stops making the noise when I turn the convection off and starts again when turning it back on.

7 Upvotes