r/bookbinding • • 3h ago

Where does your offcut stop being scrap?

0 Upvotes

The smallest piece of blue paper on the bench is also the only one with the grain direction marked. In this bindery puzzle, two people have fifteen minutes to turn the same table over between workshops. Kit is keeping that little scrap for the person who cuts the endpapers tomorrow. Lee has been asked to clear everything smaller than a postage stamp.

“Everything?” he asks.

“Everything loose,” comes the answer from the sink. Kit looks round just as Lee picks up the little desktop vacuum. It still needs two AA batteries under the cover. That buys them a conversation they otherwise would have had over a bin.

Kit lays the blue sliver on the cutting mat and draws a box round it with chalk. Lee sets a square of grey board over it. To somebody walking in tomorrow, the first version looks like part of today's mess. The second looks like a clean piece of board available for use. Neither actually tells the next binder what the scrap is for.

The fix I'm leaning toward is taping one edge of the sample inside the folded work ticket. You can feel the grain and lift it to compare the colour. The drawback is that the ticket normally lives across the room with the press. Where do you keep reference scraps that still have a job on the next shift?


r/bookbinding • • 5h ago

What would you do with this?

Thumbnail
gallery
8 Upvotes

I’m just a beginner but I have this book on my shelf and was thinking of restoring it as a project. I don’t even know where I got it, and it has no sentimental significance to me, so if I wreck it trying, it’s not too bad. But I’d like to know what more experienced binders would start with. And if you know a video to demonstrate it, that would be helpful.


r/bookbinding • • 9h ago

Completed Project Coptic binding with text

Thumbnail
gallery
130 Upvotes

Not sure if this has its own binding name, but I saw a repost of a book on this sub a while back that had coptic binding stitched as text and I wanted to give it a shot! I watched Sea Lemon's video on it, but it was honestly pretty intuitive if you're adept at coptic binding. My second and third Os got a little wonky on me lol. Just gotta make clearer markings for myself and triple check then before punching the holes with my awl.

Oakwood is the name of the cemetery where I took the picture that's printed on the front cover. I did some straight line anchoring stitches on either end just for stability - my spine is 9x~.75" (22.9x1.9 cm), so I didn't want my letters to look too squished, but I also didn't love how much space that left on the end without the straight lines.


r/bookbinding • • 10h ago

Hand made notebook help

4 Upvotes

Hi everyone,

I have a book in Chinese for handmade notebooks. I can read it but I don’t know the material names I need to buy here in the U.S. I want to just start simple as it will be my first time to try and want to later on teach some teenagers to make it as well. Watched some videos online as well.

I plan to start it small. I am not great at sewing but can do very basic. Here are my thoughts:

  1. Want a hard cover with fabric. Maybe can glue some paper as decor on the cover.

  2. Just 10 pages or so and a small size to keep it simple.

What type of materials do I need? Where to get it? I have some basic fabric cutter/ scissors, mat, and paper craft cutter, etc.

Any good video recommendations are also welcomed.

Thank you for all your ideas.


r/bookbinding • • 11h ago

Help? Should I be concerned?

Thumbnail
gallery
4 Upvotes

Not sure if this is the sub for this but I bought this book a few days ago and noticed this glue between the cover and the pages. Is this normal or am I going to have to learn how to do some re-binding lol?


r/bookbinding • • 13h ago

Help? Repairing binding with sewn signatures

Post image
3 Upvotes

Help! I'm new to binding and repair. I have this paperback (not valuable, not old) with sewn signatures. As you can see in the photo, the original glue strip has completely come away. How should I go about repairing/rebinding this? Thank you!


r/bookbinding • • 15h ago

How-To Materials calculator for book covers

Thumbnail schmedt.com
14 Upvotes

The Schmedt website has just added this calculator that maybe useful for estimating sizes and measures of cover materials.


r/bookbinding • • 15h ago

Help? Best approach for a handmade journal

7 Upvotes

I am a total beginner, and want to make my partner a journal for Christmas. I've done some research, but my head is spinning a bit from all the jargon and different techniques online - and I don't want to drop £50 on a bunch of kit which then isn't right.

I also can't seem to find lined short-grain book paper anywhere...

So, I was just wondering if anyone had any suggestions for a simple, no-frills beginner technique for an A5 journal.

Thank you very much in advance.


r/bookbinding • • 16h ago

Help? Help on fixing Cover

Post image
3 Upvotes

Recently got a 2nd hand copy of Josee, the Tiger and Fish manga from Yen Press, and it had these minor damages in the back cover. Seems like the actual print was printed first in a plastic film before being glued on the actual cover paper. I was wondering if there was any way to at minimum, reduce the damage. Thanks!


r/bookbinding • • 17h ago

Three piece bradel cloth-leather combo construction - any advice appreciated

4 Upvotes

Hi all,

I've watched some DAS videos on 3-piece bradel and got interested to try and do it with a leather spine piece and cloth covers. I have 0.5-0.7mm goat leather that could be really great for this, but i am not sure if there is anything additional that i have to do to incorporate it well into the case- i've never worked with leather in bookbinding before.
The width of the cover boards will be narrower to accommodate the additional thickness of the leather compared to cloth so the side overhang is still good. Will the hinge area be flexible enough to open and close properly with the standard 7ish mm gap or do i need to increase the hinge area to something like 10-12mm (or more)? do I have to to thin out the leather in some areas? Any advise on questions below or other things learned after trying anything similar would be greatly appreciated!


r/bookbinding • • 20h ago

Completed Project First rebind - Good Omens

Thumbnail
gallery
63 Upvotes

This is my first rebind (second project overall) - still have a lot to improve for next time but given my inexperience I'm pleased with how this came out!

This is my friends very loved and battered copy of good omens (pictures at the end of the original cover, where one piece of tape was holding it to the spine). They wanted a cover that didn't have Neil Gaiman's name or face on it, so I made a new hardcover and paper labels with just Pratchett's name.

Improvements for next time - my hinges could have been better, and the card I used for endpapers was from a roll, so they got a bit wrinkled even after trying to wrangle them flat. Given the condition of the text block if I was braver it would have been good to sand and gild the edges, but with it being a sentimental book I didn't want to try it and mess it up, so that's a skill to practice on my own books.


r/bookbinding • • 1d ago

Last splitboard bindings done before I switch to laced boards for a bit.

Post image
268 Upvotes

Hours of work led to efficiency improvement. I think I can safely say I am proficient with a library style binding (split board). Next will be repeatedly making laced in boards until I feel proficient while also learning how to marble my own paper!

Any tips for leather? I have several books on how to do it, i have done leather working before (belts, wallets, bags), but no functional experience for book binding leather with several low grade hides on the way.


r/bookbinding • • 1d ago

Help? Loose signature near the hinge

Thumbnail
gallery
8 Upvotes

This book "broke" this morning at work - you can see the mull about one signature away from the end of the book. I know how to fully recase, and also how to repair a hinge, but what's the best way to tighten this situation up without going crazy (either in the mind or in excessive repairs)? Thanks so much!

First pic: Looking down at the text

Second: Perspective on where this is occurring

Third: Middle of the signature that's sort of become detached from the rest of the block


r/bookbinding • • 1d ago

Fixing a breaking spine

Post image
4 Upvotes

Okay, so this is my church's bible from about 1990, and the spine is cracking and breaking. What can I do to slow the breaking and maybe fix it. They left it open in the middle, flat for an extended period of time, so I'm guessing that's where/when it started to break. I was going to make/buy a cradle for the spine to lay flatter at least, but I have no clue on what else to do to help preserve it.


r/bookbinding • • 1d ago

Help? Typesetting

23 Upvotes

Hello! So this year I’ve decided to cancel my Microsoft subscription in order to try something new for my typesets. I’d love to hear any recommendations for softwares that you have used to make fun typesets? I’ve heard good things about Adobe Indesign but would love to know of any other suggestions.

Edit: Thank you so much to everyone you responded with your recommendations :) I’m going to try them all out and see which works best for me. Thank you so so much!!


r/bookbinding • • 1d ago

How can I repair a broken spine?

3 Upvotes

My fiance has a 1974 edition of Gray's Anatomy. The spine is broken clearly into the halves. I want to rebind it and fix the break. Any tips?


r/bookbinding • • 1d ago

Completed Project Painted edges with vinyl stencil

Post image
11 Upvotes

I tried to do some painted edges with acrylic paints. I did a layer of light blue first and then a mustard yellow with a vinyl stencil. It was difficult trying to get the images right up to the edges of the cover. I think next time I am going to try make the stencil wider for an overlap.


r/bookbinding • • 1d ago

Completed Project My first finished book... And bloopers.

Thumbnail
gallery
34 Upvotes

Hi everyone, it's an honor for me to show you MY FIRST COMPLETED BOOK. I am so excited, the varnish i put on it hasn't even dried out fully yet as i am taking those pics. I have had some prior attempts but none of them good enough to actually be put into my library.

This project has consumed me for a while. For it i bought a large A3 paper guillotine, an A3 printer, hand-made my own sewing cradle and book press.

It's very far from perfect. I didn't really respect any technique and this led to a lot of problems along the way, and in a far more laborious process than was probably necessary. It's some kind of coptic stitch, but i took it waaay too far by also adding the yellow reinforcement bands that took AGES to sew on (see the progress pics, just one of them took probably as much as the regular stitch). Fun fact, the yellow bands are sourced from a car winch thingy.

Sewing those on also meant i could never properly back it or guillotine it so it is a little crooked and uneven. It also swelled the spine a lot which necessitated adding a lot of paper to the exterior of the cover to compensate for the thickness of the bands. I'll just stick to coptic stitch in the future.

Making the covers was a real journey as well. Having already stitched the cardboard boards, i decided to make the "outer" cover separately and glue it on. I took two thick A3 papers, printed the image on one of them, and sandwich-glued a large piece of cloth between them. This resulted in an actually pretty nice flexible but sturdy cover that i glued to the boards and pressed. Unfortunately, this also resulted in the spine stretching it a bit too much which broke the corners. Also all the edges of the outer split and delaminated, which i halfway fixed by applying PVA glue to them, but I will need to buy some of those metal edge and corner protectors to permanently remedy.

After that, the outer printed paper exterior was already starting to collect dirt so i decided i have to seal it somehow, so i applied some painting varnish to it, which actually turned out great.

Also regarding the actual text, it contains the complete Borges short stories, in their original translation by himself and DiGiovanni, that have been out of print for many decades, due to copyright / greed related disputes. I converted the text to EPUB from scanned PDF books, corrected and typeset it. Given the subject matter, I'm, sure Borges would approve of my little project.

The cover painting is The Library of Babel by Jean-Francois Rauzier.

I love it in its imperfect state, forgive my excitement but it's easily the coolest thing i ever made with my hands and hopefully the first in a long series.


r/bookbinding • • 1d ago

Completed Project Any Robert McCammon fans here? He’s my favourite author and I made this rebind. 100% suede.

Thumbnail
gallery
7 Upvotes

r/bookbinding • • 1d ago

Help? Faux Leather Recommendations!

Thumbnail
gallery
25 Upvotes

Hello! I just recently got into bookbinding and I used faux leather for my second bind.

I used leftover faux leather that my dad had from a woodworking project from 15+ years ago (so it might have been thicker/older than recommended?) but I found it really difficult to work with. I know repetition and practice will help, but I’m also hoping I just used the wrong kind.

So I’m asking for faux leather recommendations and advice! What websites or stores you ordered from or even little tips or equipment you found that helped! I eventually want to bind the 6 saga fanfic I wrote and prefer the look of (faux) leather

Thanks!


r/bookbinding • • 1d ago

Did i ruin my starch paste?

5 Upvotes

I made some wheat starch paste for the fist time after being away from the craft for a while and used 2tsp starch and 6 3/4 tablespoons water. it took about 10 minutes, and it looked fine when i was done, just not very sticky. i put it in the fridge so i could use it this morning, and it came out like gelatin. did i do something wrong?

what is everyone’s preferred recipe?


r/bookbinding • • 1d ago

Comfortable sewing position

48 Upvotes

I might very well be the only person inte the world who has struggled witch this, but...

Just in case anyone else have be struggling to find a comfortable position sewing headbands, I just made something that really makes all the difference for me. Previously I've put the book in a guilding press, but that was to heavy and cumbersome for me to spin it around when I needed to see the book from a different angle, plus it placed the book so far above the workbench that I needed to take multiple breaks to rest my arms. But no more!

I made this out of standard bookboard that I had at home. The book is now much closer to the bench, which lets me lean on my elbows while I work, AND it's easy to spin around if I want/need the book in a different position. When I work on thinner books, I can just place extra stuff in the "holder" to make sure it held in place. 30 minutes of work to measure, cut and glue. Work smarter, not harder. 😉

(Sorry about the shaky video, I'm having the hunger shakes 😅)


r/bookbinding • • 2d ago

Help? Bookcloth from velvet?

3 Upvotes

Hi!
I’m working on covering my child’s prayer book. It’s a whole thing, all the parents decorate the book cover and then the kids get it in a little ceremony at school. Don’t get me wrong, most people are decorating velvet bookcloth with tacky glue, felt, gems, and paint. But i’m going a bit overboard, of course. (That’s what you get when you have a crafty mom with ADHD).

For my child’s cover, I’m embroidering velvet - regular sewing velvet, which will have muslin between the back of the embroidery and the velvet, but only in parts of it, where it’s embroidered.

How would you recommend making the cloth into bookcloth? Will the wheat paste method be ok for velvet? And then wheat paste to glue it onto the book as well?
Why does the paper in the book cloth help prevent bleeding through, then, if it’s the same kind of glue?

I don’t need perfection but I do want it to look nice and feel soft (not have the fabric stiffened with glue).

(Also, would you recommend shaving the velvet where the endpapers will go?)

I bound one book 20 years ago, but I’m pretty much a beginner.
Thank you!


r/bookbinding • • 2d ago

Detached endbands?

2 Upvotes

Hello,

I'd like to pick the brain of all of you book binding experts. The following is not a book I've created myself, but one I would like to try to fix by myself.

After some research, my understanding is that the following is simply a case of detached endbands (on both ends), and this is not necessarily damaging to the book but more of an aesthetic concern.

I'd like to confirm with you if this is indeed what I understand it to be, and if so how would you treat this? would this be a case of just some PVA glue to stick it back together?

I think it's fairly minor damage, compared to other cases I've seen while doing some research.

Would appreciate any insight, I really love this book and it is a signed edition so I'd really like to keep it in the best shape possible.

Thank you!


r/bookbinding • • 2d ago

Help? Unsure if this is normal or if stitches are too loose?

Thumbnail
gallery
7 Upvotes

Hello! I’ve just started to learn bookbinding but have watched various videos and tutorials on the process, as well as lurked on this sub for quite a while to pick up advice.

Despite all that, I’m not quite sure if the pages of my textblock should be so flat when I open it, if that makes sense. The stitches in the signatures are also fully visible and I don’t know if this is normal for a textblock and will be fine once I attach the cover or if i’m doing something wrong with the stitching (Sorry for the bad-ish quality pics).

Edit to add: This is all done after gluing the spine together, which is where most my confusion comes from haha. Before glueing, there were small-ish gaps between the signatures and it now looks like this after glueing the spine.

Any help or advice would be much appreciated!