r/bonecollecting • • Sep 12 '20

Advice Processing a Carcass 101 - the bones of bone collecting

1.2k Upvotes

Ok, so given how many comments we get requesting info on how to process a carcass, I figured it was time to update the stickie for this topic. Enjoy and, as always, feel free to comment and I will append this as needed. Just a reminder to A) always check your local and federal laws to make sure it is legal for you to possess parts of the animal, and B) if you are in an area prone to rabies or other diseases (rabbits and tularemia, armadillos and leprosy, etc), please take adequate precautions when handling dead animals, especially fresh carcasses. Always use gloves when handling a fresh carcass.

HOW TO PROCESS A CARCASS

There are generally three steps in the process of rendering a carcass down to a skeleton: 1) defleshing, 2) degreasing, 3) whitening. In general, these three steps are most effective when done sequentially. Two main things to remember during the process – Chlorine bleach should NEVER be used in any step of this process, and cooking bare bones will fix the grease and potentially cause long-term damage to the bones. Below are a few good guides for processing a carcass for you to take a look at.

http://www.jakes-bones.com/p/how-to-clean-animal-bones.html

http://baccyflap.com/txt/natmat/bones/

http://www.nara.accu.or.jp/img/elearning/2011/animal.pdf

http://bone-lust.blogspot.com/2015/05/bonelust-q-ive-been-macerating-bones.html

DEFLESHING

In general, the more flesh and skin that is removed, the faster the defleshing step is and the less smell you will have. Once you finish defleshing, you will want to pick clean any remaining soft tissue with tweezers, a scalpel, brush, etc before moving on to the degreasing step.

Open Air - This is easily the fastest method for defleshing. Using this method, you let the carcass rot naturally on the ground and let the flies and other insects work their magic. To do this technique, it is highly recommended that you use a locking cage to keep out scavengers that will be drawn to it. You simply put the carcass in the cage or fenced in area. You do not need to deflesh, skin, or gut the animal first for this to work, in fact the skin can help keep the moisture in. Sometimes it helps to poke a few extra holes for the maggots to get in. There are a few major drawbacks to this technique 1) the smell is awful and your neighbors will hate you, 2) you have to keep the carcass moist for the maggots to keep working, or you will end up with a mummified carcass, and 3) you will develop a fly problem. So, this is better done in a more warmer and more humid climate (doesn't work so well in a desert), and you only want to do this if you have adequate land and distance from your residence (and neighbors, think about your neighbors). Once the skeleton is reasonably clean, remove the bones and rinse them off.

Dermestids – great method if you have the ability to sustain a colony, and works well in the winter if you have a heated set-up. Rather than go through this process, here is a great link that goes over it. Be forewarned, dermestids will smell and do require you to keep feeding it as they are living creatures. If you do not properly ventilate, clean, or feed them, they will find a way to swarm out of their enclosure and I speak from personal experience when I say that you don’t want that to happen. Note that this is the only one of the defleshing techniques that will keep fish, birds, lizards, and small mammal skeletons somewhat intact. The other techniques mentioned below will result in disarticulation.

https://www.natsca.org/sites/default/files/publications/JoNSC-Vol7-Munoz-Saba_et_al_2020_0.pdf

Burying – this technique works best when you have a piece of property to do it on, have time, and can reasonably protect the carcass from scavengers. It also is the easiest for cleanup and has the least smell, and is a great method for when you are dealing with a whole carcass from a larger animal. This method also works with smaller animals, like rodents, if done in a flowerpot. You will still want to skin and deflesh as much as possible beforehand, and you’ll want to keep the soil slightly moist. With burying, there are two primary concerns: scavengers and loosing parts. To prevent scavenging, try to bury at least 2 ft (60 cm) deep (or deeper if sandy soils) and place larger rocks above the carcass to act as a barrier to digging. To prevent the loss of smaller elements, consider placing a wire mesh below the skeleton. The time it takes to decompose depends a lot on the local soil conditions (soil type, soil temperature, soil moisture, soil acidity), but will generally be several months for a larger carcass. I have heard of people adding bacteria (yeast) or compost to the carcass to help speed the process along. Oh, and one last helpful tip…place a clear marker over the pit so you can find it again when it is time.

Maceration – the smelliest method, but highly effective and you can use the same container the entire way through the process. You will want a large container with water, and a way to keep the water on the warmer side (over 70 F/21 C). If you can stomach it, stirring the pot every day will help with the maceration process. You will want to do pour-off’s (replacing the water) regularly initially as the water becomes too fouled (and to remove chunks of soft tissue that will invariable float around), and this is where the most offensive, gag-inducing, eye-watering, curse-laden part of the process will occur. But as the decomp gets farther along, do fewer pour offs. With each pour off, you are reducing the amount of bacteria for digesting the soft tissue. As long as there is plenty of food available, they will repopulate (try to leave some of the scum with each pour off to allow faster recovery of the bacterial population). If the water is allowed to get too cold, the decomposition process will stop and, even worse, you will convert the fats to adipocere (bone wax) which is very difficult to remove. Under ideal conditions, you can easily render a fleshed animal to bones in a few weeks using this method. You don’t necessarily need to deflesh for this technique to work (and I have found that having the bacteria from the stomach contents helped things along), but you do want to skin the animal. Stirring the mix also will aid in speeding up the process. If at all possible, try to keep the buckets out of direct sunlight to keep the algae from growing (I throw a tarp over my bins).

I am going to add in a caveat here since we see it so often - DO NOT ADD ANTIBACTERIAL DISH SOAP OR HYDROGEN PEROXIDE AT THIS STEP. You need bacteria to digest and break down the soft tissue. These two things make the environment hostile to bacteria causing it to take substantially longer to process. The only thing that you can add to help the process along is enzymatic detergent, which brings us to the next method.

Enzymatic Detergent Maceration - You also can add an enzymatic detergent (BIZ is one example) to the water to aid in the process. u/octane80808 has a great summary of the use of enzymatic detergents in the comments section that I have copied sections of here: "For anyone in Europe, we have enzyme-based washing powders [mod note - Biotex in Europe, powdered Biz w/out bleach in US]. I've been using it for years and I can't imagine it doing any other way. It's essentially an all-in-one method, as it dissolves the tissue, but also the fat, so it degreases at the same time. There's no need to whiten the bones afterwards, they come out perfectly clean (there is no bleach, or whitening agent present AFAIK, so it's all natural). The only downside is that any cartilage also dissolves. So for fish, birds, young animals, or small animals, you'll be spending an afternoon gluing the bones.

I also clean my skull manually during this process. Depending on how impatient I am, and how much free time I have, I take them out of the solution every day to every other day. I remove the tissue I can remove without disturbing the skull too much. And I refresh the solution. So a new spoonful of washing powder, and warm water. The latter also helps to speed up the process, as higher temperatures seem to be favourable. By refreshing the solution every day, I can usually clean a skull within one or two weeks...renewing the solution isn't necessary, it will just take a lot longer.

The washing powder is relatively cheap, and it comes in large boxes. You only have to use a teaspoon or tablespoon, depending on the size of the container/skull. So it lasts quite a long time as well..Note that the bone may feel soft after this step, especially if processing a bird or fish. It is better to allow the bone to dry before handling as this will re-harden the bone. Also, bones may turn black during this process if the water isn't changed regularly enough. Do not worry, you can treat this discoloration during the "Whitening" step."

Simmering/Cooking – this method ONLY should be used with larger animals, and can be effective when you have a carcass that is dehydrated jerky. The reason is that high heat will warp bones, and will fix the grease in the bones making step 2 (degreasing) incredibly difficult. Never use this step with birds, fish, and small mammals. To use the boiling method, you actually want your carcass to have flesh, but gutted, in order to protect the bones. Place the carcass into the boiling water and allow the water to return to a low simmer, then remove from heat. Leave the carcass in the water for only as long as it takes for the flesh to “cook” (if you are boiling for an hour, you have ruined the bones). Remove from water and the flesh should come off easily, although internal tissues (like the brain or inside the nose) will still be adhered. You can use a pressure washer or hose with a good nozzle to try and clean off the hard-to-reach areas. Be extremely cautious using a pressure washer as it will blast more fragile bone to pieces and can easily destroy a skull.

DEGREASING

You will need a degreasing agent for this step, most of the liquid dish soaps will work great here, just avoid the opaque ones or ones with strong colors (colorless and clear work great and won't dye the bones). Laundry soap often doesn’t work as well, and some will dye the bones. The exception to this is enzymatic detergent (in the US this is sold as BIZ), which works well as a degreaser. This step requires a container big enough for you to submerge the remains in. Add water and soap – how much soap is up to you and depends on the amount of grease in the bones. You will need to change the soapy water as it becomes cloudy, generally at least once a week. Continue this process until fully degreased – i.e., the water doesn’t cloud after a week. This is the longest step, and will take much longer than you think. If you see any yellowing or oily spot on the bone, then it still needs degreasing.

You can substitute acetone or ammonia for dish soap as the degreasing agent, but both have their safety issues. Ammonia is an irritant, so only use ammonia if you have a respirator. Also, be careful when emptying the liquid as household ammonia will kill vegetation.

Acetone also can be used, but you cannot dilute it with water. As a result, acetone is often more expensive that using the other two agents, and as a bonus it can melt plastic, so you will want to use a different type of container than a plastic bucket. It also dissolves nitrile and latex gloves, is flammable (no heating the liquid), and the fumes are toxic, so there is that. Also, acetone will evaporate, so the container needs to have a tight lid. If used correctly, you can treat multiple batches of bones with acetone, and acetone works faster than other methods. Lastly, acetone can’t be disposed of down the drain because of it’s toxicity and remember that bit about dissolving plastics…like your drain pipes?

WHITENING

After the bones have been degreased, you may wish to whiten the bones. This is not a necessary step, and is mainly cosmetic though it does help to sterilize the bones. You can use 3% hydrogen peroxide from the store, and it can be found in higher concentrations as hair developer, which is up to 12% hydrogen peroxide. Other options for obtaining hydrogen peroxide are from a pool supply store, though you have to be careful that it isn’t mixed with other chemicals. The important things to remember during this step is that A) hydrogen peroxide will degrade quickly when exposed to sunlight, and B) hydrogen peroxide degrades rapidly when exposed to heat, C) hydrogen peroxide will degrade faster when exposed to air. So, it works better when covered and not in direct sunlight.

Simply submerge the bone in the hydrogen peroxide until you reach the desired whiteness. If using 3% hydrogen peroxide, it isn’t necessary to dilute the liquid. Higher concentrations may require dilution as it is a powerful oxidizer.

An alternative method to submerging in hydrogen peroxide is sun bleaching. Note that this exposes the bones to the elements, and you lose a lot of control over the whitening process. It also takes considerably longer than the hydrogen peroxide approach.

NOTE: Chlorine Bleach should NEVER be used to whiten bones. Chlorine bleach degrades the bone collagen, which is the protein component of bone that holds the mineral component (hydroxyapatite) in place. This will leave the bone brittle and powdery, and the bone will continue to degrade over time. The effects are irreversible.

DRYING

I add this as a last step as this is a critical step where mistakes are often made. Bone is a porous material that contains organic components. If dried too rapidly, those organic components can shrink, or parts of the bone may dry faster than other parts. This can result in cracking, warping, and delamination of the bone. In general, let the bones dry slowly and out of the sun. Do not bake or expose it to high heat, or attempt to speed up the process. You may notice teeth cracking during the drying process. This is not uncommon, and you can glue the teeth back together after they drying process is complete.


r/bonecollecting • • 8h ago

Art Ferret teeth jewelry

Thumbnail gallery
51 Upvotes

r/bonecollecting • • 13h ago

Bone I.D. - N. America Found in Florida near a lake, looks like a carnivorous fish. It was about 6-8 inches long from nose to the back of the skull, but that’s all I’ve got.

Thumbnail
gallery
75 Upvotes

r/bonecollecting • • 15h ago

Advice How to process highland cow horns?

Thumbnail
gallery
80 Upvotes

Recently got some (ethically sourced) cow horns, they’re bony but seem to be covered in what Im assuming is keratin or something similar and was wondering what the best way to clean and preserve them properly is?

I’ve used water for bones before but unsure if that would work as I don’t want it to get trapped in the horns. TIA


r/bonecollecting • • 14h ago

Advice Found an old, dried armadillo shell — how can I safely clean and preserve it?

Thumbnail
gallery
56 Upvotes

It’s completely dried out, hard, and has no noticeable odor or remaining soft tissue.

I’m aware armadillos can carry bacteria, including the bacteria associated with leprosy (Hansen’s disease), so I want to be careful.

Does anyone have experience safely cleaning, disinfecting, and preserving an armadillo shell?

Specifically:
What’s the safest way to disinfect it without damaging the shell?
Would hydrogen peroxide work, or is there a better method?
Is there any way to make it safe enough to display indoors?
Are there any risks that remain even after cleaning?

I’d love advice from anyone experienced with taxidermy, bone collecting, or preserving animal specimens. Thanks!


r/bonecollecting • • 3h ago

Bone I.D. - N. America What bone is this??

Thumbnail
gallery
5 Upvotes

Please help! Found in a rural area in Arizona. I believe it could possibly be part of a kitten or puppy. Definitely a carnivorous animal. It looks split in half (photo three) because it only has molars and the bone looks rough at the end, so this jaw bone could have been originally longer.

⚠️ TRIGGER WARNING:

My mom found this bone where I found my cat when he was a starving older kitten with blue eyes and obviously taken from his mother early. He was possibly dumped on the side of the road and I hope it isn't one of his siblings that I never found and died.


r/bonecollecting • • 7h ago

Bone I.D. - N. America Unidentified bird skull lower Deschutes

Thumbnail
gallery
10 Upvotes

I saw this skull and was wondering what it was. I didn’t take it because bird law.


r/bonecollecting • • 15h ago

Bone I.D. - N. America Bone ID- Midwest USA

Thumbnail
gallery
35 Upvotes

Hello, back again! I'm cataloging my bones, as I have so many, and I wanted to confirm an ID on this guy before putting it in writing. I'm pretty sure it is a raccoon, but wanted a second opinion. Found on a large sandbar in the Missouri River near Nebraska.


r/bonecollecting • • 14h ago

Bone I.D. - Europe help identify <3

Thumbnail
gallery
20 Upvotes

i bought this in brighton today, the tag says “neolithic to early medieval - european provenance”

any idea what animal this skull belongs to?


r/bonecollecting • • 12h ago

Bone I.D. - Europe First ever "proper" bone find! Need help identifying it though

Thumbnail
gallery
14 Upvotes

It's about 13 cm in length and 16cm wide; found in an abandoned wild part of a park. Obviously, it's a vertebra (maybe in the lumbar or sacral region of the spine?) of a pretty large animal, but who? Just a dog? Or someone more interesting, like a cow (but it woudn't make sense, would it)? Sorry to bother anyone on such a trivial find :_). Thank you in advance for any kind of help!


r/bonecollecting • • 9h ago

Bone I.D. - N. America what part of a deer is this?

Thumbnail
gallery
6 Upvotes

i found these next to a deer jaw so i’m assuming it’s from a deer is this the leg?


r/bonecollecting • • 16h ago

Bone I.D. - Europe I.D. Please help me to recognize this skulls.

Thumbnail
gallery
17 Upvotes

r/bonecollecting • • 1d ago

Advice what could cause this deformity?

Thumbnail
gallery
102 Upvotes

gray fox skull i found, entire skeleton was completely intact on forest floor. No missing parts or injuries on other bones, just this strange formation and ridges on the top of skull. Fracture that didn't heal right? Bone cancer? ​


r/bonecollecting • • 8h ago

Bone I.D. - N. America Bone ID southern ontario

Post image
3 Upvotes

r/bonecollecting • • 13h ago

Bone I.D. - N. America Bone ID - Long Island, NY

Thumbnail
gallery
7 Upvotes

Found this bone on the coast of the North Fork of Long Island, it’s around 7 inches long. Any ideas? TIA!


r/bonecollecting • • 3h ago

Bone I.D. - N. America What is this bone? Southeast Louisiana

Thumbnail
gallery
0 Upvotes

Found it in my driveway. Looks cut like ribs/food but I’ve never seen ribs look this way 😬


r/bonecollecting • • 13h ago

Advice Smelly turtle shell?

Thumbnail
gallery
5 Upvotes

I picked up this shell from a local oddities shop in CO. Once I got it home, I realized it’s kinda stinky. It doesn’t seem like there’s any flesh in it anymore but there might be some stuff gunked up way up in the shell. I’m wondering what would be the best way to clean it and deodorize?

I’m reading that simply soaking it in water is a bad idea (not that I planned to!!); maybe burying it in borax or salt, or even salt with some herbs, might be the way to go. I didn’t find too much, but I’ll keep researching. Figured I might as well ask too while I’m at it.

Anyone have any suggestions or advice? Thank you!!


r/bonecollecting • • 9h ago

Advice tips for cleaning bones with dirt + moss ?

Post image
2 Upvotes

capybara skull, huge and has dirt and moss, only technique I know is soaking in water for a couple days, but I wanted to know if there's anything more appropriate I could do, also that it would harm it the less since it's already pretty fragile and broken


r/bonecollecting • • 14h ago

Bone I.D. - N. America What skull is this

Post image
4 Upvotes

About 2 inches in length. Found in Pennsylvania. I'm guessing some kind of rodent or rabbit but I'm not sure.


r/bonecollecting • • 7h ago

Advice I don’t know how to title this, but I am looking for advice

1 Upvotes

Today I went out to finally start trying to collect the bones of my cat who passed away in January after I left his body outside for months. I live in Minnesota so I had to wait until may, and in the meantime my dad built a box out of scrap wood and wire mesh and fencing. I’ve never done more than leave a body out in a specific part of the yard out in the open to decompose, but I couldn’t risk an animal dragging him off like has happened to some of the bodies I’ve found while wandering the property. I’ve also never done this with anything larger than a cotton tail.

My issue now is that because the body was enclosed there’s a lot of… other stuff to get around that I don’t usually have to deal with when I just leave a body out for a year. I wanted to get what I could before the snow comes, but I was hoping that there would be less skin and fur stuck to the bones and some of it is still sticking to parts of the body. I don’t want to mascerate the remains if I can avoid it, so if I can’t get this stuff off of some of the remains I might leave the body out for another half a year. Would that work? Is there any way to clean off the stuff stuck to it without leaving it to sit in warm water for awhile? I will consider washing with warm water, but I would rather not soak. I’m going to clean the bones with hydrogen peroxide like I always do after I get everything off of them. If the weather was warmer I might have considered rinsing it down with the hose or something, but it’s almost time for snow. Is there anything I can do, or should I just lock the box again and revisit this after it’s been warm again for awhile in spring or summer? I’ve had bodies I’ve done that with clean themselves up more, but I’ve also had bodies left out in winter mummify and I both don’t know how to handle mummies and I don’t think I could keep his remains with anything on them without breaking down. I just want to keep his bones with me until the end of my life when we can hopefully be buried together. He was my soul cat and I couldn’t bring myself to cremate him because ashes just don’t seem as personal. I’ve cleaned my own wisdom teeth to make into earrings, but this time it’s been, I don’t know, certain things are too much to think about trying and doing it how I normally do at least feels like I’m going through the motions of something I’ve done dozens of times before and as long as I don’t think about it until the hydrogen peroxide stage I can lock in and feel more after I stop being in there.

I am kinda emotional right now so I’m having trouble thinking about what to type. It also looks like a rat managed to chew through the mesh on the bottom but it’s no longer in the box. This is my first time actually opening the box since he was put in there in one piece and I’ve never done this with a pet before, though I have found barn cat bones before. I am thinking I might wear an n95 mask next time I go out there though now that I know a rat was digging around in the box. There’s also been a black bear coming around and it has been ignoring the box for more interesting things so far, but I’m a little nervous about that too.


r/bonecollecting • • 13h ago

Advice Did I clean this sheep skull good?

Thumbnail
gallery
3 Upvotes

I did it pretty much without any help or tut's, is it good? And fyi I didn't want it fully white


r/bonecollecting • • 1d ago

Collection We went back and bought the elk!

Thumbnail
gallery
532 Upvotes

I am personally a huge fan of bone deformities and stuff and after seeing all the comments I convinced my mum to drive all the way back and help buy it. I am genuinely so grateful to have smth like this apart of our collection at home and I thought I should come back and give you guys some better pictures <3
(Ps… not for sale)


r/bonecollecting • • 8h ago

Bone I.D. - N. America Need help IDing this bone.

Thumbnail
gallery
1 Upvotes

Found this bone in the mangrove swap near me. Thinking deer shin but looking at a human tibia makes me wonder. Just need to know if I should report this.


r/bonecollecting • • 9h ago

Bone I.D. - N. America Bone-ologists of NM, does anyone know what animal this might be from? (Sandia Heights)

Thumbnail gallery
1 Upvotes

Location is Albuquerque, NM