r/billiards • • Feb 06 '25

Buying Guide [Guide] What cue should I get?

94 Upvotes

tl;dr###

Updated for 2025, old guide is here. This one will be shorter!

If you're looking to buy your first cue, or your first 'serious' cue, this info will help.
If you're not patient and just want a tl;dr, or brand recommendations (not in any order):

$~50ish: Imperial, Valhalla
$100ish: Action, Players, Schmelke, McDermott Lucky, Viking
$200-$300: Cuetec Avid, Players PureX, Rhino Nebula
$300+: Cuetec Cynergy, Predator, Mezz, Jacoby, Pechauer, Lucasi, Meucci

This list reflects my own biases mixed with some common recommendations on reddit. But there's plenty of other good brands, and each one has a range of products. There's $200 Viking cues and $2000 Viking cues. I list them in certain price brackets because I think, at that price, they're good bang for your buck.


"Performance"###

Performance is mostly about the player. There's not a lot of 'technology' in a cue... it's a stiff rod with no moving parts. It mostly just needs to stay straight, feel ok, and not fall apart. Still, there are some things to consider. Most of the R&D for cues goes into the shaft - the skinny half of the stick. Specifically, manufacturers use different materials and build methods, to reduce deflection.

Deflection###

'Deflection' describes what happens when you hit a cue ball with left or right english (sidespin).

What happens when your cue ball hits another ball on the left? That 2nd ball goes to the right. The same thing happens if your stick's tip hits the left side of the cue ball. The cue ball goes to the right... it "deflects" off-course from where you aimed. So you have to adjust your aim to compensate for that.

How far off-course? That depends on the shaft. In this pic the dashed line is where you'd go with no english, the solid black line is where the cue ball might go with a low deflection shaft (about 3-4 inches off course). The red line is where the cue ball goes with a standard, solid maple shaft (about 5-6 inches off). Here's a typical real world shot where this matters. The black line is where I'd aim with an LD shaft. The red line is where I'd aim with a higher deflection shaft. IMO, having to make the big adjustment shown by the red line, looks unnatural and makes using english harder.

For that reason, my main consideration is whether the cue has a shaft with low deflection. Unfortunately, those shafts cost more. If you can't afford it, don't worry about it, standard shafts are fine. World championships have been won with standard shafts.

Bottom line - if you buy an LD shaft, what you're buying is just a different line of aim for shots with sidespin. This line of aim might make sidespin shots feel easier. Any other benefits or drawbacks you hear are mostly myths... they don't give you better spin, or cue ball control, or more draw, or whatever. Anything you can do with them, you could also do with a standard shaft. They just change where you aim shots with sidespin.

Build quality###

Common build quality issues include: the cue arriving warped, or gradually warping over time, the tip falling off, the joint not quite screwing tight, the joint unscrewing by itself, and the ferrule (white thing just below the tip) cracking. You can avoid these by just buying reputable brands, or from good dealers who offer a warranty. I like Seybert's, Ozone Billiards, Omega Billiards, and Pooldawg. Like other products, you usually get what you pay for.

There's also some differences in 'feel' with cheaper cues. For example, the shaft might be coated with a sticky clearcoat that doesn't slide smoothly through the hands. They may have excessive vibration, or a weird sound. The joint may not be exactly flush, or the grip is a cheap material that collects sweat. It helps to try before you buy. I don't recommend a cue segmented into more than 2 pieces, or one that has a screw-on tip, or anything below $50.

If you decide to go with a low deflection shaft, you also want to consider how the shaft is built. In a nutshell, low deflection = less mass at the end (the last 8 inches). To make shafts have less mass, they make them skinnier (like 11.75mm instead of 13mm at the tip), and hollow out the core of the shaft. They may optionally fill it with foam so it doesn't feel hollow, and splice together multiple pieces of wood to ensure it stays straight. They can also make shafts out of carbon fiber.

There's no law preventing manufacturers calling their shaft low deflection, even if it isn't, so be wary of any shaft that says it's LD, but is made from a single solid piece of hard-rock maple. Look for something that's been hollowed near the end, or made of CF.

Carbon Fiber###

Carbon Fiber (CF) is strong, stiff, and very light. The lightness makes it a good material for a shaft, and many people like the stiffness. But you can get very low deflection with either wood of CF. CF is also nice because it's less likely to warp, ding, or crack. But any shaft can last 20 years if you're careful with it. Note: don't confuse carbon fiber shafts with cheap materials like graphite or fiberglass. If a shaft says it's made of some ambiguous 'fiber composite' and the cue is less than $250, the shaft is probably not carbon fiber. A typical name-brand carbon fiber shaft is $400-$600. The cheapest that I know of are Rhino, at $200. Don't worry about getting a carbon fiber butt... they exist, but there's no advantage to it.

Shaft diameter###

The diameter is the thickness of the shaft at the tip. When people talk about tip diameter, they really mean shaft diameter. It matters because one of the major ways to reduce deflection, is to just make shaft skinnier near the tip. This also affects how a stick feels sliding through your hands... a skinny shaft might feel more precise, like you're hitting a very specific part of the cue ball. And you may feel you see the cue ball a little more clearly. It's easier to form a closed bridge around it. On the other hand, it may feel a bit thin or flimsy compared to traditional 13mm shafts. People will tell you a 13mm is more 'forgiving' but no stick will turn your misses into makes. I think lower deflection makes learning the game easier, so I recommend something skinnier if it's in the budget.

A standard cue shaft is 13mm, like a house cue.
12.5mm is a popular size for cues that have reduced deflection, but want to feel 'solid'.
11.75 is a common size for very low deflection shafts.
Anything outside of these ranges is uncommon, and not recommended for a first cue.

Taper###

Taper is how rapidly the cue transitions from fat (near the joint), to skinny (near the tip). In pool there's two flavors - conical and pro. A conical taper gets skinnier gradually and consistently, like the shaft is a long skinny cone. A pro taper gets skinnier more rapidly, reaching its narrowest diameter maybe 2/3rds of the way down the shaft, and then stays skinny from that point, all the way to the tip. Most pool shafts are pro taper, as this ensures the shaft doesn't get "fatter" as you pull it back, it stays the same.

Tip###

All cues come with a tip installed. Don't get a cue with a screw-on tip, they're trash. Tips come in typically 3 flavors... soft, medium, hard. These labels are subjective and vary between manufacturers. One brand's "medium" might be harder than someone else's "hard". Softer tips mushroom (which can be fixed with the right tools) but are easier to shape and scuff. Harder tips are less likely to mushroom but harder to scuff. Some people will tell you softer tips give you extra spin, or makes shots more forgiving or whatever... these are myths. When in doubt, go with medium. You don't need to worry about size, it's standardized. Recommended tip brands include Kamui, Moori, Tiger, and How, but everyone has their favorite. I wouldn't overthink it.

Break cues and jump cues often come with a special super hard phenolic tip, so it can transfer a bit more energy to the cue ball. You don't want a phenolic tip otherwise.

Joint###

There's different types but honestly, you'll never miss a ball because of the joint. As long as it screws together tightly, and stays together, it's fine. If you buy a shaft separately from the butt, you need to make sure the pin type matches. Some joints are more common "standards" like Uniloc, 5/16x18, or 3/8x10. Others are more proprietary and only fit stuff from the same manufacturer.

Butt###

Play-wise, the butt is basically just a handle for the shaft. But it's also where you have most of a cue's decoration, and has a big impact on how "nice" the cue looks (and also on the price). High end cues have butts made with one or more nicer types of wood, plus inlaid decorations made of wood or more exotic materials like ebony, ivory, mother-of-pearl, turquoise, gold, silver, etc. Low end cues have very minimal decoration (like a solid single color of stained wood) and don't have inlays, or only very simple ones. Some feature printed graphics. In lower-end cues, these graphics try to "fake" looking like a nicer cue by simulating those inlays I mentioned. Otherhave some illustration or design... a rose, skulls, playing cards, etc.

Wrap###

The butt may or may not have a wrap. If it does, common materials include leather, rubber, or irish linen. Irish linen is very popular, it looks like speckled string that's been wrapped around the butt hundreds of times. The wrap is a matter of preference - a cue shouldn't really be in danger of flying out of your hand when you shoot, so mostly this serves as a sweat absorber and a decorative element. You just want to make sure it feels good. If at all possible, try a wrap before you buy, because it's not that easy to remove or replace.

Weight###

19 ounces is the default, standard weight. A few people prefer 18. Anything lower is a bit weird but not completely unheard-of. Many people like slightly heavier cues in the 20 or 21 ounce range... the theory is that the added weight keeps the cue from wobbling as much when you swing it. If you happen to be unusually big and tall, you might prefer the added weight and also some added length via an extension. I wouldn't get anything outside the 18-21 range as your first cue. You're not locked into the weight you buy, there's a hollow area in the butt of every cue where a long fat screw called a weight bolt is screwed in. By changing the bolt, you can change the cue's weight.

An extension does what it sounds like... extends the length of the cue. They're sold separately and not a common accesssory for a beginner to have, but if you feel like a normal cue is just too short, it's something to consider.

What should I spend? Is ____ worth it?###

Most cues are sold with a "real price" and a "sucker price" - you'll often see a cue online showing it's been marked down by 50 or 100 bucks, but that isn't a 'special deal', the lower price is what the cue actually costs, and if you shop around you see that same number everywhere.

Example - a Cuetec Avid chroma:

Seybert's:
"Regular" price: $255
"Sale" price: $229

Pooldawg:
"Regular" price: $255
"Sale" price: $229

Omega Billiards:
"Regular" price: $255
"Sale" price: $229

Just make sure when you buy, that you aren't paying the sucker price, and don't expect to find too many killer deals unless you buy used... pool cues are one of those things that tend to go for the exact same price everywhere. Some sites offer more options to customize the cue in small ways. As for whether something is 'worth it', that always depends on your income. Roughly speaking, a dirt cheap starter cue is around $50 USD. But if you can hold out for $100 you might get something with OK build quality, a little color, or graphics. For $200, you get some nicer looking inlays and such, but not a low deflection shaft. Around $400-$500 you get cues with LD shafts, and maybe some nicer designs. Beyond $500, you're probably paying paying for the brand name, or for a custom cue that is made to your specs, or really nice inlay work.

How long should a cue last?###

In theory, until you die. But wood is wood... it can get worn down or warp over time. Generally, most cues don't warp by themselves, they need to be mistreated... stored improperly, or put through lots of sudden temperature / humidity changes. If a cue arrives warped, or warps soon after you buy it, most reputable sites will replace it.

Tips are supposed to wear out and get replaced, like tires on a car. Maybe once a year or so. Your pool room should have someone who does tip changes... the cost varies but probably it will be more than $10 and less than $40.

What brands are good for a beginner?###

Really, anything is fine if you're just starting out. Especially around the $100 bracket. You can just buy based on looks. Be aware that a famous player's name on a cue doesn't necessarily make it a top quality cue. You don't want to decide to buy a cue because it mentions Johnny Archer, the Black Widow, or Minnesota Fats. Commonly recommended starter sticks include Action, Players, Viking/Valhalla, and Schmelke. If I had to pick one specific make and model, I'd say get a Cuetec Avid.

At the more expensive end, if you get a cue with a low deflection shaft, you see lots of recommendations for Predator, Mezz, and Cuetec Cynergy.

Custom cues###

"Custom cue" can mean either any cue that isn't mass-produced, or a cue that is literally made to your custom specifications. They tend to be more expensive, ranging from $400 at a minimum, to tens of thousands of dollars for the famous ones. Generally these come with standard shafts.

There's a certain cachet to owning a custom cue... you have a one-of-a-kind that plays exactly the way you want. It's a luxury and status symbol. Most beginners won't want to buy one as their first cue, you can play world-class pool with a $400 production cue, but it's something to keep in mind for later, when you know what you like and can afford something fancier. Be aware that many custom cuemakers are famously behind-schedule... it could take months, even years before your cue is finished.

Break and Jump Cues###

Breaking puts a lot of stress on the tip, compacts it and makes it harder, and in rare cases may cause it to come off. So a lot of players prefer not to break with their playing cue. That means you can use a house cue or buy a specialized break cue. For a break cue, I don't consider it quite as important to worry about whether the shaft is low deflection or not. The LD ones are expensive, but generally you won't be using sidespin on the break, and if you do it accidentally... that's a skill issue.

My priority for a break cue would be to look for a good hard tip, and make sure you can try it before you buy. Since you'll be hitting hard with it, any weird vibration or 'feel' will be magnified, so make sure you like the feel.

There are also specialized cues made specifically for doing jump shots, the legal type where you spike downward on the cue ball and bounce it off the slate like a basketball. Jump cues are very short and light, with a super hard tip. Generally, I don't recommend buying cues to solve skill issues, but even with maximum skill, jump shots really need a jump cue. They make shots possible that are simply not viable with a full cue. I've used Predator Air, Cuetech Propel, and Hanshew jumpers. They're all excellent. Good ones tend to be expensive though. There are also hybrid break/jump combo cues. If you're buying one for league, make sure it's legal within the league rules.

Other Questions?###

Don't be afraid to post if you have a question not covered here. If possible, try to hit with a cue in real life before ordering. In the lower price ranges, you're mostly just looking for a certain minimum level of quality... basically it should not fall apart, rattle, or feel weird. Once you reach that minimum level (which can be achieved for $100 or so) then the only other thing you'd pay for, performance wise, is a specialty LD shaft. For the most part, cues are priced so that you get what you pay for. Most of the online retailers I've worked with have been great when it comes to issuing refunds, and their pricing is all pretty similar across the board, but some of the best deals I've ever gotten have just been through friends at the pool hall.

We have a Pool Cue Buyer's Guide on the sidebar too, check it out. Also check out Dr. Dave's cue page.


r/billiards • • Sep 03 '26

Official Rules Links to the official pool rules, with answers to frequently asked questions

27 Upvotes

In pool, it's hard to know what the "real" rules are, because there isn't just one set of real rules, even at the pro level.
So this will help you answer any rules questions, but first... you should decide which rules to use.

If you had to play with just one set of rules for pool in the USA, it should be WPA rules -
https://wpapool.com/rules/

The website has a bunch of links, but the one you want is the "Rules of Play" -
https://wpapool.com/wp-content/uploads/2026/01/2026.01.02-WPA-Rules.pdf

These are the rules that pros use (in most events). The other documents on that site, like "Rule Regulations" covers stuff that mostly only pros and referees need to worry about... things like dress codes, taking breaks in a match, using a shot clock, etc.

You may have also heard of BCA rules. WPA rules are 100% the same as BCA rules. WPA (World Pool Billiard Association) is the governing body for pool worldwide.
BCA (Billiards Congress of America) is the North American branch of WPA.


Where some people get confused is "BCAPL", BCA Player League.

BCAPL is an amateur league started by BCA, and now run by CSI. And there's a few minor differences in the rules. These changes are to make it more accessible to amateurs. For example, in BCA or WPA, if you foul on the break, the cue ball must be played from behind the line. In BCAPL, you get ball in hand anywhere on the table.

BCAPL rules: https://www.playcsipool.com/bcapl-rules.html

There are other popular leagues. APA is the largest league in North America, with several differences from WPA rules. So if you shoot with someone for the first time, you should ask what rules they use. They may only know APA rules, which can be found here: https://rules.poolplayers.com/


One more thing... some parts of the game are left up to whoever is running the tournament or league. For example, some tournaments or leagues may not allow jump cues even though they're legal in a WPA event. Each event will decide if they allow template racks, or where you're allowed to break from. Some long-running events have 'house rules'. For example, the Derby City Classic one pocket event says that if you elevate a cue to 45°, you will not be called for a double hit, while the onepocket.org "official" rules state that a double hit can be called even with elevation. Many bars have their own house rules.


It can be time consuming to scroll through some of these dense rulesbooks, so here's some quick FAQ-type info you can look up.

Racking

8-ball: eight in the middle, any stripe and any solid on the back corners. 
The one doesn't have to go up top. Alternating stripes and solids isn't necessary. 
In APA, the only requirement is 8-ball in the middle.

9-ball: 9 in the middle, 1 up top, the rest should be random.
10-ball: 10 in the middle, 1 up top. In WPA, the rest are random.  
In BCAPL, the 2 and 3 must go on the back corners.

In all games, pattern racking is not allowed.

Breaking

• Breaks can be legal or illegal, and that status is separate from any fouls you commit. It is possible, for example, to have a break that is legal, but still a foul. The reason for the whole legal/illegal thing boils down to whether you can be forced to break gain, or whether the opponent can take the break instead.

• For all rulesets, if you break too soft, or your cue ball was over the line, it's an illegal break. When a break is illegal, usually the balls are reracked and then broken again. For a break to be considered hard enough, at least 4 balls (not counting the cue ball) must touch a rail. In pro events, there may be additional requirements like the 3 point rule, or you have to satisfy a ref that you aren't deliberately soft breaking.

• In 9 and 10 ball, you must hit the head ball. In 8-ball, you can hit any ball. In APA 8-ball, you must hit the first or second rows.
If you fail to do that, it's not a foul, but it's considered an illegal break.

Scratch on the break, or CB jumped off the table -

WPA 8-ball: Behind the line  
BCAPL 8-ball: Ball in hand anywhere  
APA 8-ball: Behind the line  
9 ball and 10-ball, all formats: Ball in hand anywhere

Jumping a ball (not the CB) off the table -

WPA 8-ball: Foul, ball stays down, incoming player can play it from behind the line or rebreak  
BCAPL 8-ball: Foul, ball stays down, incoming player has ball in hand anywhere  
APA 8-ball: Foul, ball is spotted, incoming player plays behind the line. 
9 and 10 ball, any format: ball stays down, ball in hand anywhere. 9 / 10 are spotted.
Jumping the 8 off the table: WPA, BCAPL: spot it. APA: loss of game.

Winning on the break -

8 on the break: WPA, BCAPL: spot it, option to rebreak.  
APA: Instant win, unless you foul, then instant loss.  
9 on the break: Instant win, all formats.  
But, some tournaments may modify this and spot the 9 instead.  
10 on the break: Not a win, gets spotted.

Open table / choosing 8-ball groups

WPA and BCPL: table is always open after the break.   
Some pro events use "take what you make" rules.
APA: take what you make. If you make balls from both groups,   
the table is open, regardless of how many balls you made for each.  
So, if you make 2 stripes and one solid, you are not locked into stripes.

When the table is open, any combo is legal, like a stripe to a solid. But you can't use the 8 as the first ball in a combo. Hitting it early like that is a foul. You can legally do something like stripe - 8ball - solid.

Once you establish groups, it's a foul to shoot balls in the opponent's group.

APA has a special provision for accidentally doing this: the opponent must call the foul before you make your next shot. If they don't, and you make a legal shot, your inning continues. In theory, the opponent can allow you to several balls from their group, then inform you of the foul, but it's considered unsportsmanlike. However, once you make all the balls in a group and you're on the 8, you now take ownership of that group, and can legally pocket the 8 to win.

Calling Shots

You don't have to call "obvious" shots but the rules aren't always clear about what can be considered obvious. In WPA, they mention "banks, combinations, and similar shots" but don't spell out what 'similar shots' means. In BCAPL they spell them out: banks, caroms, kicks, kisses, or "rail contacts that are not incidental".

You only need to call which ball is going into which pocket. You don't need to call whether it touches a rail, or another ball, or any other details. If the right ball goes in the right pocket, you keep shooting. This means that occasionally, you can fluke a shot and continue shooting. For example, let's say you try to slam a shot into the corner, undercut it, and it flies around the table 4 rails before dropping into the same corner pocket. Since the intended ball went into the called pocket, you can keep shooting. This applies to 10-ball and straight pool too.

8-ball: Shots are called in WPA and BCAPL. Not required in APA.  
Calling the 8 however, IS required in APA.  
9-ball: no shot needs to be called, in any format, but some tournaments   
have a 'house rule' that the 9 must be called.  
10-ball: all balls must be called. In WPA, you cannot combo the 10 in early and win.  
It spots and you stay at the table.  
In BCAPL, you can combo it early and win. If you make a ball and call safe,  
 it's treated the same as making any uncalled shot.  
The opponent will come to the table with the option to shoot, or make you shoot again.

In one pocket you don't need to call anything. In banks, you need to call the ball and pocket every time no matter how obvious the bank, and the bank must go cleanly, a kiss off another ball is not allowed.

Early 8-ball, and other early balls

• Outside of the break, making the 8-ball early is an automatic loss in all formats.
• Making the 9-ball early is an automatic win, but some events require calling the pocket.
• Making an uncalled 10-ball early is not a foul, the ball is spotted.
In WPA you can't combo it to win, even if you call it. In BCAPL, you can.

10-ball - "passback" rules, and "Call-shot-call-safe"

In most modern 10-ball events, you only need to call your shot. You don't need to call safeties, since you can't make a ball and call safe. If you don't make your called shot, but make some other shot accidentally, it's treated like a push-out: the opponent can shoot from the current position, or force you to shoot. This applies to the 10-ball too... if you make it in the wrong pocket, it's spotted, and the incoming player has the option.

There's a variant of these rules called passback, or call-shot-call-safe. Under those rules, if you miss any shot, and the opponent doesn't like the leave, they can force you shoot again. To avoid this, you must explicitly call safety. If you played a shot, obvious or not, they can always pass the table back to you. These rules are uncommon.

Safeties and Push-outs

• Making a ball and calling safe is legal in WPA and BCAPL 8-ball. If you fail to say "safety" before the shot, and it could be considered an obvious shot (e.g. not a bank) you must keep shooting. In APA, you cannot make a ball and play safe. If any ball drops, you must keep shooting.

• Otherwise, if you're not planning to make a ball, calling safe is optional in all formats. APA encourages it to make scorekeeping easier.

• In WPA or BCAPL, both 9-ball and 10-ball, you can play a push-out after the break. You have to declare it, there's no such thing as an "obvious push-out". Any ball you pocket on a push-out, stays down, except the game-winning ball.

Accidental Touches

In WPA, touching any ball (with hand, hair, clothes, etc) is a foul. Playing this way is called "All ball fouls".
In BCAPL, it is "Cue ball fouls only", meaning it's NOT a foul to nudge one object ball, but is illegal to disturb the cue ball.

It's also a foul if you nudge multiple balls. In BCAPL, if a ball gets bumped, the opponent has the option to leave it in position or put it back. The shooter can't put it back unless his opponent gives permission. Also, it's a foul if you move just one ball, but that bump might change the outcome of the shot.

In APA, it's cue ball fouls only, and if you bump an object balls, they must go back to their original locations. There's no option to leave them there. This is still the case if multiple balls are moved. Also, if your cue ball settles where a bumped ball used to sit, the bumped ball is put back as close as possible to its original location, "in a fair manner".

Push Fouls

The meaning of "push shot" or "push foul" has effectively changed over time. Originally, it meant a shot where the the tip "rides" the cue ball for an extended period of time, pushing it along like a shopping cart. This kind of foul is very rare. In modern pool, 99% of the time, "push shot" is used to describe a double hit foul, in cases where the double hit happens too fast to see.

Double hits are always illegal, but different leagues and tournament will have different policies for enforcing the foul.

In WPA, and BCAPL - if two balls are frozen, you can shoot into the cueball and it's not considered a double hit, because both balls leave the tip simultaneously. But if there's any gap between them, it may be called a double hit. Additionally, if you hit the shot slowly, the tip may stay on the cue ball too long and you'll be called for the other kind of push foul. You can avoid this by "shooting away" from the object ball, meaning you cut the object ball sharply or "thin" it.

APA does not call push fouls when two balls are frozen, but doing it repeatedly may be considered unsportsmanlike.

Behind the Line vs. Ball in Hand

Generally, fouls are penalized with ball in hand anywhere on the table. Shooting from behind the line is a "bar rule", or oldschool rule from 50 years ago. There are exceptions though.

WPA, APA 8-ball: scratch or jumped ball on the break = behind the line.  
BCAPL 8-ball: fouling on the break = ball in hand anywhere.  
9 & 10 ball: ball in hand anywhere, always.  
1 pocket: behind the line, always.

When playing behind the line, only the base of the ball needs to be behind the line in most games.
But in one pocket, the whole cue ball must be behind the line, and any ball you shoot at must be fully past the line.

Jumping

In all games, it's illegal to jump by hitting super low and 'scooping' the cue ball up into the air.
If a game allows jumping, you have to strike downward on the cue ball at an angle, bouncing it off the surface like a basketball.
If a scoop jump happens accidentally, it's considered a miscue and is not a foul.

8-ball: Legal jumps are traditionally not allowed, but not banned in the rulebook.  
It's up to the organizer or league.  
In APA, jump cues are banned, so it must be done with a full cue.  
9-ball and 10-ball: Always allowed.  
1-pocket: full cue only, but most events ban them altogether.

Three foul rule

• In 9 and 10-ball, 3 consecutive fouls by the same player is loss of game.
• In one pocket, it's also a loss of game.
• APA 9-ball doesn't have this rule.
• 8-ball doesn't either, but some tournaments choose to add it.

In all games with a 3-foul rule, the player must be notified they're "on 2", before they commit the third foul. WPA specifies they must be notified as they come to the table. BCAPL doesn't say that, but does require that the opponent acknowledges the warning.

Five second rule

In all games, if a ball hangs on the edge of the pocket for more than 5 seconds, then drops, it gets put back where it was.
In APA the exact wording is "a few" seconds.

Stalemate

In all games, if neither player can advance the game, it's considered a stalemate and the balls are reracked, and the original breaker will break again.

• In WPA, if the ref decides the game is not progressing, he must warn players about a possible stalemate. Then, if they fail to advance the game after 3 full innings (3 turns from each player) then the stalemate is called. If the players agree, they can skip the 3 turns and go right to the re-break.

• In BCAPL, the ref doesn't have to warn players. If the game doesn't progress for 3 innings, it's considered a stalemate.

• In APA, players must agree to a stalemate regardless of how many turns pass without progress.


r/billiards • • 5h ago

Cue Porn New cue day

Thumbnail
gallery
22 Upvotes

Found this in a thrift shop for $50. Thought, nice looking stick, but dang, that's a high price. Then i started googling and said SOLD!!! I always wanted a McDermott cue, but my skill level doesn't even justify one of their cheap models. Now I've got to get some practise in, lol. TLDR: Found a McDermott H851 at a thrift store for a great discount


r/billiards • • 4h ago

WWYD Which one would you pick?

Thumbnail
gallery
5 Upvotes

Just for fun, though I may pull the trigger on one. I'm not even sure yet what the name brand is here, but I've bought from the person selling them before and he always does me right. He's making me a tempting deal that will allow me to treat myself to a new cue without breaking the bank. Which one do you guys think looks the best?


r/billiards • • 9h ago

Instructional Thoughts on my new Dumbo's feather

Post image
11 Upvotes

I've been thinking lately that aiming in pool isn't necessarily the hardest part. The harder part is actually delivering the cue where you think you're aiming.

We spend so much time on stance mechanics — foot angles, body position, shoulder alignment — but I recently realized I was overlooking something simpler: where my bridge hand goes as I get down into the shot.

Before (what I was doing wrong)

I'm right-handed. I'd stand behind the ball on the shot line, then build my stance from the ground up:

  1. Set my right foot on the shot line (with way too much overthinking about placement and angle)

  2. Set my left foot (more overthinking)

  3. Bring the bridge hand and cue down

Without realizing it, my bridge hand would drift toward the center, or even left side, of my body as I went down. My setup looked fine, but my bridge was landing just inside the shot line, so the cue was pointing slightly left of where I meant to aim.

After (what clicked)

Instead of obsessing over my feet, I now think about connecting two dots: my right foot and my left bridge hand.

  1. Stand behind the ball as usual.

  2. While still standing, hold the cue out in front of me on the shot line, with my bridge hand on that line in front of my right foot.

  3. Get down while keeping that foot-to-hand line intact. That's the only thing I think about. The feet and body just find their spot around it.

It almost feels like I'm "being a triangle." Sometimes the bridge hand feels too far right, but it isn't. I was just used to steering it toward the middle of my body. Keeping that connected line also means I sometimes reach my bridge out farther than I'm used to, which naturally rotates my shoulder into a better position.

The result is that my body fits itself around the cue instead of me forcing the cue into place around my body.

TL;DR: Set the triangle, then get down.

Curious if anyone else thinks about their stance this way, or if there is a more established name for this technique.

I've obviously heard of the triangle thing before, so I'm not advocating some new revolutionary idea. Just thought I'd share what clicked for me which was the mental focus purely on left hand to right foot connection BEFORE getting into shot, and relieving my mind of overthinking on other body mechanics.

P.S., I come up with a different pool secret every week, so hopefully this one sticks for me 🤣


r/billiards • • 2h ago

Questions Meucci shafts

3 Upvotes

Hey all. I'm in the market for a new shaft. Currently playing with a 12.9 revo. Looking for something more narrow. I have a meucci so the meucci joint. A new revo is just out of my budget so I was thinking of just sticking with meucci. Im torn between their carbon fiber and their kielwood. Ive played with their carbon fiber. But no experience with their kielwood. Ive played with other kielwoods. And interested with how It compares to other kielwood shafts out there. Anyone on here play with theirs?


r/billiards • • 8h ago

Maintenance and Repair Worth getting Simonis cloth on a 7 foot home table?

8 Upvotes

Wondering if it would actually make it play smaller as this cloth is faster than the current cloth


r/billiards • • 1h ago

Cue Identification Help identifying this pool cue

Thumbnail
gallery
2 Upvotes

Inherited this and I think it’s an Adam cue and likely vintage. Has anyone seen this before/ know anything more? Thanks in advance!


r/billiards • • 11h ago

Maintenance and Repair Covering rails

10 Upvotes

I average about 7 minutes a rail (I don’t know if it can be faster). Any mechanics have tips on getting faster?


r/billiards • • 3h ago

9-Ball Nice shot, Three balls.

0 Upvotes

r/billiards • • 3h ago

Instructional Good billiards app for drills?

1 Upvotes

i’ve searched some and i used to have bullseye billiards but i updated the app and although it shows shots you can demo id like more diverse drills like the classic L shape and such. are there apps that offer ideas like that preferably that could also show where to aim at the CB to develop feel? TIA


r/billiards • • 1d ago

Instructional How to play the perfect jump shot

77 Upvotes

r/billiards • • 7h ago

Questions Cuefit extension for McDermott

2 Upvotes

I've been looking at options for stackable extensions for McDermott that doesn't require the engage bumper retrofit. The extension from Cuefit looks promising with their 1/2-13 bumper adapter and wanted to see if anybody had some experience to make sure the bumper fits properly on McDermott cues.


r/billiards • • 6h ago

9-Ball Anyone have any experience or a review for the Gino Ferrari 4x8 BLVCK cue case.

Post image
1 Upvotes

r/billiards • • 20h ago

8-Ball Paul Mottey

Thumbnail
gallery
13 Upvotes

Hey, I’m located in Northern California and looking to have this appraised and locate collectors. Any recommendations will be appreciated. Thank you


r/billiards • • 13h ago

Questions Black Friday Deals

3 Upvotes

Anybody know if there are any websites or brands doing Black Friday deals on pool equipment?

I was planning buying a cue stick around that time and it just dawned on me about BF.


r/billiards • • 1d ago

Drills Training Table Build

Thumbnail
gallery
46 Upvotes

I just finished up this project, building a small training table that works in my space. I got to try it out a bit this morning for the first time.

The purpose of this was so I could better record myself aligning to a shot, then shooting. My initial setup was on my computer desk, with my monitor and a webcam at one end, and a couple stickers to mark points on a line on the desk surface. With the crosshairs enabled on the webcam, it was a great way to check my alignment when down on the shot. But not a great way to see what I do when I actually shoot a ball. Also dealing with an awkward wall placement limiting my stance. And I had no way of seeing a side view, to make sure my curing arm was 90 degrees to the cue.

So I found a video on YouTube on how to make a table like this, and while it wasn’t super detailed, I (not a remotely handy or crafty person) was able to design and build this table top training thingy.

So now, conveniently having an extra tv which fits our built in storage shelving perfectly, I can have a dual camera setup to confirm my alignment, and eventually record to monitor other things in my stroke like head movement, timing, and follow through.

I’ve only gotten to hit a few balls, but it’s immediately helping me to feel out that 90 degrees, as I have a tendency to grip too far back on my cue, then not keep my shoulder back quite enough. Additionally, I use a long follow through, where I drop my elbow after contact and on a full stroke, my grip hand finishes close to my chest. I tend to point my grip index finger on the follow-through. Not that this is inherently wrong, I know it’s taught by some coaches, but for my follow through, I can see now how unnatural this looks from the side, so that will probably be the first thing I attempt to address with this setup.

This is purely for use with straight in shots, so I can start honing in some finer mechanics which require video. If you’re interested in that kind of thing, I’d say this is very worth it. It’s far from exciting, but I genuinely think this is going to be a huge boost to my fundamentals.


r/billiards • • 1d ago

9-Ball Aramith ball on Amazon... Fake?

Thumbnail
gallery
19 Upvotes

What are the chances this ball is fake? The plastic packaging is super flimsy and the insert isn't cardboard, it looks like cheap magazine paper. Is this normal Aramith packaging? It was normal price. Thanks.


r/billiards • • 20h ago

10-Ball Best tips for money matches?

4 Upvotes

So Im starting to get into money matches there are a few Filipinos that I've been playing with and tonight was the first night where one of them asked me if I wanted to play him next week for money normally I ask them. It is the best or one of the best ones in the group and I'm not sure if he is better than me or not.

I'm wondering for those that play money matches what are your best tips and tricks that you're willing to share from making the game to how to play, find opponents etc.? (I know only play for what you can afford to lose, I'm talking about tips that help me win) and what are some rules/handicaps that you think are over/undervalued and why?

I like 10 ball, these Filipinos like 9 ball but we always play rotation


r/billiards • • 1d ago

Probably an Advertisement Cuetec Breach Break Cue and Cuetec Ghost 3x5 for sale

Thumbnail
gallery
9 Upvotes

Remove the post if not allowed
Selling my cuetec breach break cue and cuetec ghost 3x5 hard case.
550 for break cue
300 for case
Seller pays shipping and I am located in East Brunswick, NJ if you are local. Let me know if interested, mostly play snooker now so my equipment would be better off in someone else’s hand, Thanks!


r/billiards • • 20h ago

Questions Pool Table Buying Help

3 Upvotes

I looked through the thread but I didn't see what I wanted (probably missed it according to my wife). I have played on/off for 30 years, but I have never had my own table. I am looking at used tables and there is quite the spread in pricing. I have plenty of room and would like an 8 ft table. Are there good sites to purchase a used table other than marketplace. What should I be looking for, and what do I want to avoid


r/billiards • • 1d ago

Instructional Cue Ball Control

34 Upvotes

I have plenty of students come to me to learn cue ball control.
There are the basics
Stop Shot (Stun)
Follow
Draw

Stop Shot - when you are straight in and Stun is same shot with an angle and cue ball slides off at the tangent line.
When i ask students how they stop the ball from 1 diamond away - they typically say center ball or below center and firm. Then I move to 2 diamonds away and they say hit lower and harder. 5 diamonds away they say lower and harder... So they are changing 2 variables when they don't have to.
I point out that watching pros or great players, they tend to shoot almost every shot the same speed and stroke. Then I'll demonstrate this to them:
1 diamond away - 1/4 tip below center with natural full stroke (medium soft speed)
2 diamonds away- 2/4 or 1/2 tip with same stroke
3 diamonds = 3/4 tip below center again same stroke

4 diamonds = 4/4 or 1 tip

5 diamonds = 5/4 or 1 1/4 tip

6 diamonds = 6/4 or 1 1/2 tip
But the key is to do same speed, same follow through, and its same stroke on all of them.

This is all based on when the cue ball is sliding (back spin wears off and ball skids/slides for several inches before it turns into forward spin). If the cue ball is skidding/sliding it will be a stop shot. If it still has backspin on it then its draw and if its rolling forward it will be follow. You can play around with this by using a striped ball (horizontal) as cue ball and see when the backspin wears off and skid/slide happens and when it turns over to forward roll. Pretty simple.

Draw and Follow are based on the Stop shot. Student needs to get a good grasp for the stop shots first. Then for Draw/Follow we determine how far away from the ball you are. Lets say you are 1 diamond away from object ball. We know 1/4 tip below center will stop the ball. For every 1/4 tip you go lower than that you will get 1 diamond of draw. So 1/4 below is stop, 1/2 below is 1 diamond draw, 3/4 = 2 diamonds draw, 1 tip = 3 diamonds draw... but this only works with same speed and stroke as the stop shots.
Then lets say you are 1 diamond away from the ball and we know 1/4 below center is stop but we want follow. if you come up 1/4 tip (to center ball) it should follow forward 1 diamond. 1/4 above center should follow 2 diamonds, 1/2 above center should be 3 diamonds follow. The key is the same speed and stroke as you did the stop shots.

To simplify this I do Plus (+) and Minus (-). So 3 diamonds away = (-3) to stop and for draw 2 diamonds (-2) you get -3-2 or -5 every number is 1/4 tip so -5 is -5/4 or -1 1/4 below center (below center because its negative).... If 2 diamonds away = (-2) to stop and you want 5 diamonds follow (+5) you get -2+5 = +3 which is 3/4 above center

You can take this extreme and really break it down smaller. If you are 1 diamond away from a ball and want to stop it 1/4 tip below center. Once you can do this consistently as a perfect stop shot. If you raise your tip a hair from that position (1/16th of inch) and stroke the same way, the cue ball won't stop but instead it will rock forward and replace where the object ball was (replacement shot). Go back to your tip position for stop shot and lower the tip 1/16th of an inch - and the cue ball will rock backwards about a balls width. This comes in handing on safety play. So if you want 1/2 a diamond of draw instead of 1/4 tip you use 1/8th of a tip. This really comes in handy because the cue ball and object ball distance is rarely - exactly 1 diamond increments away from you. So a stop shot when you are 1/2 diamond away is 1/8 tip below center, not 1/4 tip.
Once a student really gets a feel for this, they are more likely to execute great shape because they are only changing one variable (tip position). They are more likely to execute a consistent stroke when they are trying to stroke through 90% of their shots the same speed and follow through.

Then I'll have students ask about hitting softer or harder - does this still work. It does but you need to adjust for it. If I hit the ball half the speed of my natural stroke then I need to double the English. So at 1/2 speed from 1 diamond away - for stop shot - I need to cue 1/2 tip below center. If I am hitting harder and its approximately 2x the speed then I need half the spin. So a stop shot from 1 diamond away would be 1/8 tip below center... The math all adds up.

So once a student has a good grasp on stop shots from any distance. And they know the tangent line. I'll show them that the tangent line - is changed by amount of draw/follow. With 1 diamond of draw (relative to stop shot) the tangent line is pulled back 1 diamond. With 3 diamonds of draw you simply go with tangent line and count 3 diamonds back and this will be approximate cue ball path.

Then I will break some players minds by showing them Follow Shots and using the back of the ball aiming. The video below is best example I could find of it.

https://www.youtube.com/watch?v=7nuqo6uYwqQ

Basically think of it this way. If you shoot straight into a ball with follow, the cue ball follows straight. If you have a very slight cut the cue ball doesn't go straight but it will go slightly to that side. The more of a cut the more the cue ball goes off to that side. There is an exact reference point and that is behind the ball. I'll typically start teaching this by using the 2:00 into video - a simple carom shot on 9 ball. The keys are smooth stroke, lots of follow, not too hard, and you aim the center of cue ball for this contact point that is behind the ball. Once they get a feel for this technique on Caroms then I'll show safety play like the 1:00 into video. Then I'll show safeties like 2:20 into video. Then I'll show breakout shots (but like you have ball in hand). When they really start getting a feel for how this can be used a wide variety of ways - I'll explain that I use this on almost every shot I take. All the other shots you were using the back of the ball first to plan the path of the cue ball (safety or carom)... but what about every single shot you take... setup a slight cut into side pocket. You know where you have to hit the ball to make it, this gives you your aim line of the shot. Continue your aim all the way to the back of the object ball - that gives you the spot on the back of the ball. From there you simply need to draw a line from the middle of the object ball out this contact point and all the way to the rail to predict where the cue ball will go with follow. I'm not going to lie, most students get confused at this point and need more explanation. So I will Aim the shot - while I'm down on the shot - I ask them to go over to other side of the table - continue my aim to back of the ball - and ask them to touch the ball where that contact point is - THEN have them turn their hand so its pointing at the middle of the object ball . Once they do that their finger is now in line with where the cue ball will go, so if they continued the line of center ball, out contact point, continue line from their finger all the way to the rail - the cue ball will hit this spot (give or take a few inches left/right).
So using this back of the ball - when using follow (top spin) we can predict the path of the cue ball to aim Caroms (make early 9 ball, or another ball), we can predict the path of the ball to play lock up safeties, and we can predict the path of the cue ball on most shots.
This works as long as we are aiming center cue ball to inside the edge of the Object ball and all the way to a full hit. It no longer works when you get to 1/2 ball hit or thinner.

I can have a student spend months working on cue ball control. Not using side spin at all. But rather working on a consistent stroke. Doing predictable stop shot from 1, 2, 3, 4, 5, 6, 7 diamonds away. Doing draw/follow shots from each distance and different amounts of draw/follow. Work on predicting tangent line, and changing tangent line with 1,2, 3 diamonds draw/follow. And using back of the ball aiming for follow. They go from grasping the ideas, to understanding them, to mastering them. I will challenge those players to play entire practice sessions with only using Follow, or only using Stun/Stop or only using draw - to really hammer in the concepts and predicting cue ball path.


r/billiards • • 1d ago

Cue Porn Current hitters

Post image
10 Upvotes

Keith Josey, ebony full splice

Joss Thorshammer Purpleheart


r/billiards • • 11h ago

9-Ball Paying top female ?

0 Upvotes

I play in a tournament that is run by a woman and at the most there will be 15 players playing and at the most 2 women usually only one . My question is do you think a tournament with that few of players should pay top female spot when there is only one or two females playing ?