Some time ago, I posted about wanting to get this bike trailer a shot, and as promised... here's the review!
TL;DR: It does 80-90% of the travoy while costing only 20% of it. For heavy loads, I would add stiff boards (e.g. cutting boards) to place the load on the frame instead of the fabric since those are held in place by hook+loops.
also if it's not obvious, this is not sponsored, and not AI gen text for what that's worth
Getting it
So not long ago I was looking for a trailer similar to the Travoy - foldable, compact, easy to carry. Like my bike (well, the lightest an ebike can be). I'm no stranger to pricey accessories (Ortlieb, Arkel, Two Wheel Gear Panniers), especially when it means better longevity and performance... but I can never find myself justifying the price of the Travoy.
After some searching, I eventually found this product, the Vevor cargo trailer on the online Walmart store for ~$80. It's one example out of Vevor's many unnamed bike cargo trailers. Nothing fancy, just a barebones basic bike trailer listing with a buncha AI generated images... Not a good first impression.
But, with it looking so similar and being so much cheaper compared to the Travoy, my curiosity got the better of me… So I bought it just to give it a shot.
Assembly
It arrives partially assembled, only requiring you to unfold the frame, pump the wheels a bit, put the wheels on, and attach the mount onto to your bike seat post. What’s most apparent is how simple the whole thing is... unlike the Travoy with its needlessly complex proprietary parts.
The wheel is attached by a thick axle held in place by a spring mounted hook (see pics). The bearings are visible, which does mean it’s exposed to the weather… but they are bog standard skate bearings! Whatever leftover bearings you have from your skateboard/inline skates you can easily reuse.
The frame is held open unfolded by some plastic "clips" that aren't load bearing or anything so I'm not super concerned about them breaking down the line (see later in the durability/repairability section).
All in all though, super simple assembly. Nothing worth mentioning here, except that there are relatively few flimsy plastic parts (at least, few that aren't easily replaceable).
Use
Connecting the trailer to the bike is pretty straight forward: you align the joint on the bike and trailer, then put through a metal pin to hold it together. It's incredibly simple, yet one of the biggest design weakness, mainly because it is simple to a fault. The tolerances are very loose (it will rattle a bit over bumps) and the connection between the mount and trailer is a plastic piece (see picture).
But when you have it on and got it rolling, it works just about as well as any other bike trailer.
The only thing you gotta keep in mind is how low the trailer rolls, mixed with how long it is. Upright, the trailer is like, 65-70" tall. Mounted, it practically doubles the length of the bike (See the attached pic to see what I mean by this). The perk of the Burley Travoy is that it has this extension tube let's you “hold up” the trailer so that it doesn’t roll so low. But honestly, far from a deal breaker - you just have to remember your bike is twice as long as it usually is.
For anyone with a bike radar and curious... from my experience, the cargo trailer doesn't obscure the bike radar. I'm guessing the frame is thin enough that it doesn't quite obscure the rear light and radar performance. From my experience anyway.
Durability/Repairability
When you see a product 20% the price of the original, this is obviously the biggest question to ask.
What's the biggest point of failure? The plastic joint connecting the seat post to the trailer. It was probably plastic for its lower friction, since it's what allows it's side-to-side rotation... But for what it’s worth… the plastic piece is really simple and you could probably get away 3D printing itwhen it eventually wears down, or even just take a plastic rod and drill two holes through it, because that's all it really is.
How about the fabric? I'd say this is the biggest flaw, specifically how it’s attached. It’s all hook and loop (velcro). The fabric’s just there to prevent stuff from falling out, not to hold any real load. If you have a heavy, narrow cargo that would put most of its load to the fabric base of the trailer… I’m pretty sure the velcro would come undone and drop your cargo down there. Buuut… this can be alleviated if you use a cutting board of sorts to distribute the weight to the frame instead, something to avoid placing too much load on the fabric.
As for the rest of the trailer... it's honestly pretty solid and well built. There are no rivets whatsoever to speak of, everything's held together with some nuts and bolts, which I'd give points to. Only other point of failure are those plastic 'clips' that hold the frame open/unfolded, but if those wear down, you could use velcro strips and be none the wiser (it's not load bearing at all).
Summary
In summary, it's a stupidly simple cargo trailer knockoff of the Travoy does what you pay it for. Definitely far more value for your money than the Travoy at 4x the price. Only real everyday downside is the fabric held on by hook+loops, but like I said, you can alleviate this with some plastic boards to distribute the weight directly onto the frame.
So yeah, it's a recommendo from me.
I can't give direct comparisons with the Travoy since I don't own one, but I can say at the very least, if you need to haul large items at least semi-frequently, this will do the job about as well as the Travoy will at less than a quarter of the price. I mean, holy shit - $320 vs $80. It's a no brainer tbh