r/ballistics • • Dec 28 '20

45 acp and 9mm vs lvl 4!Ceramic body armor NSFW

0 Upvotes

Obviously neither is going to penetrate, but would 45 acp cause more damage to ceramic because of the extra energy?


r/ballistics • • Jan 14 '25

Which has better stopping power: one big bullet or several small ones? NSFW

0 Upvotes

From what I've read, the #1 determinant of effectively incapacitating a living thing with a firearm is shot placement. That implies to me that a rapid-fire weapon with low recoil would be better at stopping the thing you're shooting at than a large-caliber round (unless it's a car engine or something) because more shots=better chance of hitting something important. However, it's standard to use very large calibers in big game hunting, where stopping power is of special importance, and various militaries have shown a persistent infatuation with larger standard calibers in the name of better stopping power. Why is this?


r/ballistics • • Jul 22 '25

I need some help here with the ballistics of this ammo NSFW

Thumbnail
gallery
0 Upvotes

I apologize for the book. Pictures of target are provided. I’ve been shooting Greek 8mm 198gr from 1939 out of my German k98. I’ve noticed at 100yrds that I have to aim low for it to even hit the target. I aim center, it hits high. I aim low it hits near the center but other times I still aim low and it hits high. It’s all over the place which you will see in the first picture. I understand bullet ballistics. And I also understand that k98s were factory sighted for 300 meters or so. So that explains why I have to aim low. But is it all over the place due to the age of the ammo? Quality of gun powder? I also know that there is human error involved especially shooting open sights at that range on a 10” target. I just want to understand why it does this at 100yrds because at 50yrds it is dead accurate when I aim center which you will see in the second picture last 5 shots on or near bullseye!

Keep in mind that the Turkish 154GR ammo I have shoots where I want it to when I aim center at 50/100yrds (given no human error involved) because the Turks spiced their rounds up to 2800-2900FPS cause they wanted a flatter trajectory.


r/ballistics • • May 04 '17

Do rifle bullets possess wounding mechanisms other than crush? NSFW

0 Upvotes

I'm on the verge of thinking the lethality of a rifle round is only a matter of penetration and expansion (tissue destroyed by the bullet).

However I know some people vehemently disagree with this, citing temporary cavity destroying elastic tissues, momentum/energy transfer causing a shocking effect, etc. Are there other wounding mechanisms of rifle rounds, that there is evidence supporting?


r/ballistics • • Jun 06 '20

Slow Moving 5.56 - XM193 NSFW

0 Upvotes

XM193's effective velocity is considered to be 2500 fps on target. In the newer world of short barrels, that is easily within 100 yards of the shooting position.

The question I pose to you, what sort of ballistic performance equivalent does XM193 5.56 have when it drops below its threshold of 2500 FPS? Is it comparable to defensive 9 mm perhaps, or maybe another referable round? Or is it really more useless, "ice-picking" through a target?

I look forward to hearing opinions on this, and please share if you have reasoning or sources behind your opinions.

Thanks


r/ballistics • • Dec 13 '21

Creating a realistic tabletop rpg, need some data about terminal ballistics NSFW

2 Upvotes

So.. Ive had a lot of success in understanding terminal ballistics, but until now Ive not been able to find a measure on how much the human body can dissipate before perforation (in the case of a FMJ).

The idea is to balance the specialized armor piercing ammunition so that the players don't use it constantly against every target and I wanted to put a maximum on the damage received by knowing how much the body can take.

Of course, I know human bodies are no gelatin and that they are not uniform, but an approximation would be good enough (its a game after all)

This would consider no bones hit (as I'm planning to make it a lucky shot, if u hit a bone, the round yaws and you get the full energy into the enemy).

As an example so its understandable (and if i'm making a mistake, id hopefully be corrected), for now what I'm doing is giving the player the option to design their own bullets.

The first measure would be the muzzle exit energy, which would be lowered by range. When an enemy is hit, the player calculates if it penetrates armor (if any) which will be a static value that depends on the material hardness and its geometry. Then the armor reduces the energy of the projectile by an amount that depends on the material and how much is in the way. Lastly, you get the final energy touching the enemy which gives you how much damage you do (if it does spend all its energy inside, instead of perforating)

So yeah, I really need to know how much energy an adult human can dissipate before it perforates if the bullet does not have a hollow point and does not expand or deform. Of course an equation that incorporates the diameter of the bullet would be the best thing here, but if thats not available an approximation for a common diameter that I can extrapolate would be incredible

Thanks in advance!


r/ballistics • • Dec 01 '20

Hypersonic projectiles NSFW

2 Upvotes

This is becoming the new arms race. Anybody interested?


r/ballistics • • May 18 '21

I'm a writer making a murder mystery, can anyone help me with the ballistics of the crime scene?(TW murder, death) NSFW Spoiler

2 Upvotes

The body was found in a field. He was running from the murderer and was about four meters ahead of them. He was shot in two places. His right upper thigh and point-blank between his brows. The police think it was su!cide since he was found with a gun in his hand, but the detective knows it isn't because of the leg wound and originally since the bullet hadn't left his head. My question is this, would the bullet leave his head at that distance? I'm not sure what type of gun the murderer has, probably just a handgun. I know nothing about guns.


r/ballistics • • Apr 10 '21

Question about Bullet Tips NSFW

2 Upvotes

I'm wondering what materials would and wouldn't work as bullet tips, not necessarily for impact but just upon firing the gun. Most notably, which shatter and which don't. Would a diamond tip shatter upon firing the gun? Would a quartz tip shatter?

Most importantly, how do I calculate this myself?

The way I've been thinking about this is to first estimate that the firing of the bullet creates about 50,000 PSI of pressure, and then figuring out whether a given material can withstand that amount of pressure. But I don't know whether that's right, and I also don't know what material property to evaluate. Some places say diamonds can withstand pressures in excess of 600 gigapascals (over 87 million PSI) but I also read that diamond will shatter, because it's brittle. Some places seem to say brittleness is associated with low density, but I haven't gotten a straight answer anywhere. I also can't seem to find a consistent place to get the same kind of data on a variety of materials (a lot of places don't mention tensile strength, whereas others don't mention certain material types.

Some clear direction would be greatly appreciated.


r/ballistics • • Nov 08 '24

What Hit My Car? NSFW

Thumbnail
gallery
2 Upvotes

TLDR: car tailgated me at night and shined a laser into my vehicle before something hit the back of my car and left a mark. Police said it was just debris from the road.

After work last night, I was driving home on my usual route merging from one freeway to another. When merging onto the I-5 freeway I found myself stuck behind a utility truck going a bit slower than the speed limit. I didn’t think too much of it and was on my way home from work, so I didn’t really feel the need to speed past them as I had to merge into the next lane pretty soon. It wasn’t long though before I noticed a jeep like vehicle tailgating me pretty obnoxiously and close enough to wear. If it was bright out, I wouldn’t be able to see the front license plate.

Living in Southern California this kind of behavior from drivers is nothing new, but even after a couple minutes, and despite the fact that the lanes next to us were clear of traffic, this vehicle refused to go around me in my sedan. It wasn’t until I noticed that a laser was coming out of the vehicle and into mine that I began to become a little bit concerned. At this point, I assumed that it was just some asshole trying to intimidate me with a laser making me think he had a gun or something. I looked forward and tried to focus on the traffic ahead of me and ignore him. Then I heard something small strike the back of my vehicle and I saw the laser still pointed at me. I was a little unnerved, so I tried to slow down to get him to pass me. He began to try and pass me and sped up to be at the same distance in the next lane where I could see directly into the drivers seat and that it was a male with dark hair and a white T-shirt. He must’ve seen the sticker that I had put on my vehicle after someone had tried to break into it while I was at work stating that there was a camera in the vehicle because he slowed down and refused to pass me after that, continuing to tailgate me and flashes brights. Even after I acted like I was going to exit the freeway to get him to pass me. I still couldn’t get a good shot of his license plate and I couldn’t read the plate number because he had been flashing his brights in my mirrors.

When I was sure that he wasn’t trying to follow me off of the freeway, I got home and called the the police department. They transferred me to the highway patrol, who then took my name and stated that they would alert their officers. I then got out of my car and saw the mark on the car and immediately FaceTime to my father who was in the military. Upon seeing the mark, he said that it likely could be from a 22 caliber bullet being shot at my vehicle.

I called the police back and amended my report that the projectile that I had mentioned in the previous report could’ve likely been from some kind of gun. It was then that they said they would send an officer to check out my vehicle and when he arrived, he shined a flashlight on the mark and stated that it was just from a pebble that came up from the road. He googled images of shotgun bullet holes in the sides of vehicles that had very obviously been directly aimed at the side of the vehicle. While I don’t disagree with the officer that it could’ve very likely been just a pellet gun that was shot at me, I still want to see what you guys think.

The officer told me that it was just probably some debris that happened to hit the back of my vehicle while a guy was tailgating me and shining a laser into my rear window, and that since I wasn’t able to get a full plate number, they couldn’t do anything about it anyways. I had even told the officer that I had a dash cam and there was at least a picture of the vehicle that I was able to capture. He didn’t seem interested in even viewing it.

I took a couple of pictures of the mark as well as one next to my thumb for size reference (I have pretty average size hands, so the mark was probably about a centimeter or so in diameter). I also have the screenshot of the vehicle on the left as it passed me.

Please let me know what you guys think.


r/ballistics • • Mar 11 '25

Which is the lightest ballistic glass on the planet that can withstand a single hit from a .50 cal black tip? NSFW

Post image
2 Upvotes

Kindly help me.

This is my recipe for the lightest vehicle armour.

The idea would be to blunt the projectile with the first tile, make sure it is fractured with the second, and then the UHMWPE should catch all fragments. Maybe a single 1" thick tile would be better at ensuring the breakage of the penetrator, IDK. What we do know is that 2" of uhmwpe armor can stop even 20KJ of energy from a .50 fmj.


r/ballistics • • Aug 14 '25

Realistically, what kind of rounds would this setup be effective against? NSFW

Post image
5 Upvotes

Would a .380 be stopped by the baby?


r/ballistics • • Feb 19 '21

Which one of these are better for homemade plates? NSFW

1 Upvotes

Both are Kevlar. One shall reign supreme

Option 1-

https://www.ebay.com/itm/Black-Comfort-Twill-Fabric-Nomex-Aramid-Kevlar-FR-61-Fire-Retardant-DWR-/303272568628?_trksid=p2349624.m46890.l49292

Option 2-

https://www.ebay.com/itm/Wheat-Tan-100-Kevlar-FR-7oz-Comfort-Twill-Fabric-61-Wide-Fire-Retardant-DWR-/273896461429?_trksid=p2349624.m46890.l49292

Epoxy resin will be used to turn this fabric into hard plates. Both are same price

Option one is listed as just 100% Kevlar

Option two is listed as Nomex Aramid Kevlar

Which would offer best results for a custom plate?


r/ballistics • • Jun 12 '17

Projectile question NSFW

1 Upvotes

The projectile in question is made up of 2 tubes. The outer tube has rifling on the outside and is tapered at one end. The inner tube is held in place by a retaining ring at each end and can spin freely on bearings separating it from the outer tube. The inner tube also has flights on the inside that go down its length and the are cocked so that they will spin in the opposite direction of the rifling (i.e. outer tube spins counter clockwise inner tube spins clockwise). There would be a plastic disk butted up against the inner tube in order to prevent pressure loss as the projectile travels out of the barrel. The plastic wadding will fall away once the projectile exits the barrel. Would the inner tube spinning in the opposite direction of the outer tube act like a stabilizer or even a propeller allowing the projectile to travel farther and possibly even faster at a flatter trajectory while retaining its Kinetic energy? Of course you'd probably have to compensate the weight loss due to the hollow core of the projectile by choosing a denser metal or something.


r/ballistics • • Feb 07 '19

9mm vs .40 NSFW

0 Upvotes

I’ve been assigned to head a research committee for my police department examining 9mm vs .40cal for our duty weapons. We currently carry .40 cal Glock 22s, potentially switching to 9mm Glock 17s. I know the FBI researched this in 2015 when they made the switch back to 9mm. I’ve been trying to locate their memo/research regarding this. So far I’ve only found articles mentioning portions of it. Anyone have access to this or know where I can locate the full report myself? Thanks in advance!! I’d also be interested in other scholarly publications detailing this.


r/ballistics • • Dec 30 '23

Just want your guys opinions on if this hypothetical idea would work. NSFW

1 Upvotes

This is kind of rocketry related but oh well. If I made my own rocket motor, like a tube, with a hole through the middle, basically just a normal looking model rocket motor (potassium nitrate + powdered sugar) and I compacted it into the casing with a dowel, what would happen if I slipped some cut up razor blades or small glass shards into the propellant. Could I in theory hold the motor sideways, set it off, and have the glass shards fly out of the tube like shrapnel at mach 2 or 3 or whatever the exhaust velocity of the rocket was?


r/ballistics • • May 16 '17

A question for a book I'm writing NSFW

1 Upvotes

Hello. So full disclosure, I really don't know much about guns but I have this vision for a scene in my book, the most concrete I have except for the finale. These two people are face to face, literally, their foreheads are against each other. If one of them puts a gun to the back of the others head and pulls the trigger, would they both die or just the one the gun was held against? Thank you


r/ballistics • • Oct 03 '21

Happy Cakeday, r/ballistics! Today you're 8 NSFW

1 Upvotes

r/ballistics • • Mar 09 '24

Could this have been from a bullet that hit my car? NSFW

Thumbnail
gallery
0 Upvotes

I was driving in what we'll just call an unsavory part of Baltimore for an evening appointment earlier this week. It was dusk so visibility wasn't ideal but something came out of nowhere and hit my windshield right in front of my face. There wasn't a car or truck directly in front of me either, so I have no idea where the hell it came from. If it came from another vehicle, that vehicle was traveling in the opposite direction.

I drive a lot for work so I'm used to rocks hitting my windshield. But this was like 100x faster, and since I couldn't really see anything and the impact was right in front of my face l, whatever it was had to be small. It didn't crack my windshield, but as you can see in the photos, it grazed the top corner of my hood leaving an indentation(with 3 marks total which makes me think it might be evidence that it wasn't a bullet), but then after the initial impact there is a straight line on the hood that is a few inches long.

So I'm wondering, are these marks possibly from a bullet grazing my car? Is it possible that the bullet hit the corner of my hood, deflected further up the hood and then off of the windshield without penetrating it?


r/ballistics • • Feb 03 '25

7.62x39 Question NSFW

1 Upvotes

I know that generally speaking people would say a FMJ round is not a good choice for hunting, not to mention the hate that 7.62x39 gets in the hunting world. However, I have seen many test results with 7.62x39 where the FMJ bullets seem to tumble and actually produce fairly consistent, effective sound channels. So, if this bullet construction will work in war, why not on an animal? I figured that if you were able to get the same tumbling effect in an animal such as a deer then the bullet would be more effective than something like a HP that expanded a lot but didn’t penetrate much. Just wanted to hear y’all’s thoughts on this.


r/ballistics • • Jun 29 '24

This hypothetical cartridge is research for a book i plan to write.. NSFW

1 Upvotes

.30 carbine case but 2-5 mm shorter. Projectile is fmj .30 boat tail 165-180 grain. The shorter case and larger mass of the bullet makes the round subsonic ~ 1100 fps. The o/a length is the same as .30 carbine and will feed in its mags. Chamber/slide/ gas chamber would have to be modded but would this work? Be a viable cartridge out to 200+ yards. I know it would get loopy past 125-150 but the improved flight of a traditional rifle vs pistol bullet would help at longer ranges right? Thanks


r/ballistics • • Nov 11 '25

Why do I have to have to aim lower when shooting farther out? NSFW

1 Upvotes

I have a Holosun 407 attached to my MKE AP5. It’s zeroed at 10 yds, but when I shout out to 30 yds I have to aim lower. What causes that?


r/ballistics • • Aug 04 '25

Helmet fitment NSFW

Thumbnail gallery
0 Upvotes

r/ballistics • • Jun 25 '24

Bullet shot through multiple walls in my home - help me identify if I found the bullet, please NSFW

Thumbnail
gallery
6 Upvotes

Someone shot a bullet through my front window. It went through several items on my kitchen table like Tupperware and a gift card and a sweater before hitting the kitchen wall, going through it into the bedroom, then into the other bedroom wall straight out the exterior siding somewhere in the backyard. I tired to use yarn to figure out the angle and found an old piece of metal (its an old farm) that looked hit and crumpled next to a rock that had a strange looking shatter in it. Next to it was some paint from our siding and then this. Is this the bullet? I know it's not super important in the grand scheme of things but the bullet literally traveled an inch above me sleeping in my bed. The cops said if we had been sleeping on our sides we would have gotten shot so it's just kind of in my head and finding the bullet would have some weird closure for me. Thanks.


r/ballistics • • Nov 28 '20

Penetration comparison NSFW

4 Upvotes

How do the .338 Lapua Magnum, .408 Cheytac, .416 Barrett, and .50 BMG compare in terms of armor penetration? Like how would they be ranked from most to least penetration?