r/aviationmaintenance • u/uHeartMel • Apr 23 '26
r/aviationmaintenance • u/Impossible-Cry-495 • Nov 14 '23
Should I bother tomorrow?
So, I got a call today saying that I have been considered for a job turning wrenches and to go for a drug test tomorrow.
Now, I know I won't pass the test given I have smoked everyday since I got out of the military. A buddy of mine told me to skip out on the drug test, wait and apply else where since apparently, aviation mechanics have some sort of organization that keep record of all drug test failures and I'll ruin my chances for any other job if I fail tomorrow.
Any tips?
r/aviationmaintenance • u/Schoggi_23 • Mar 29 '25
Rate my rookie safety wire
Not a an A&P but a pilot. Did some safety wire and this is after a few attempts.
r/aviationmaintenance • u/Mediocre-Noise-6209 • May 15 '24
1st day safety wiring vs 2nd day
Go ahead and talk y’all shit i already know it’s coming 😂
r/aviationmaintenance • u/MattheiusFrink • Mar 14 '25
It finally happened...
Some of you may remember the tales I've told about the con-man who works in my hangar? The incompetent boob who got his job by fraud, lies, and deceit? He still works here. Today there was...and incident...in front of management.
To lay some background, we have a C172M that had a fuel sender go bad. The sender was replaced just last week, so we know the new sender was good. Our hangar con-man, we'll call him George, was put on the problem. He comes to me for assistance. Prior to my aviation career I was an Electrician's Mate in the Navy, so a signal wire is somewhat in my wheelhouse.
George has no A&P. It has been laid out by management in the past that he is to take direction from the A&Ps in the hangar, myself included. I instructed George to hand trace the signal wire from the sending unit to the back of the JPI. Three times I tell him this.
I leave George to it as I have an annual on a C150 that needs to be done, the mx lead is trying to dial in fuel flow on a new engine for a SR22T, and our good apprentice requires guidance for his own electrical issues. I'm bouncing around between those three things.
I move from helping the lead on the Cirrus to the apprentice, George stops me for further direction. I ask him if he hand traced the wire. He says he did, I ask what he found. He states he found nothing. I tell him to stand by, I will be right there to instruct him in a few moments. I move from the apprentice back to the Cirrus, George asks me again for further direction. We have the same conversation. I move from the Cirrus to go to the bathroom, George stops me and we have the same conversation for the third time. Word for word.
We break for lunch. During lunch the mx lead, George, and myself discuss what George has found. George finally brings up an inordinate amount of environmental splices in a very short length. I tell him to pull the splices down and I would come look it over after I finish servicing the nosewheel.
As I'm servicing the nosewheel George comes to me and asks if he can start calibrating the fuel sender. Is the sender reading on the JPI? No. Why are we calibrating if we haven't resolved the issue? Well he replaced the environmental splices. Who told him to do that? Nobody, he decided on his onesome to do it. Why? The old wire run was no good, he wasn't getting any voltage. How do we know this if the sending unit wasn't being sensed? No answer.
I was out sick yesterday. I returned to work and the problem was still there. No progress had been made. I finally get involved and I follow my electrician instincts. I hand trace the wire. The new ring terminal on the sender looks suspect, but whatever. I trace to the back of the JPI. What do I find? A broken signal wire at on the P6 molex. I take a picture of it.
So we get to the meat of today's incident. I'm waiting to tell the mx lead. He is in conversation with the owner of the hangar. When it is finally my turn to speak the mx lead asks what the problem was. Right at this time George walks in and asks What the problem was. My response was "Well, George, you tell me what I found since you told me three times Wednesday you hand traced the line." This lead to me calling George a liar. To his face. His response was an aggressive "Don't call me a liar!" So I stand on my feet, point to him and call him a liar again. George stepped up to me and was close to swinging on me. Expecting him to I whipped my glasses off and chucked them on the table. The owner yells for us both to stand down and the mx lead jumps up prepared to physically separate us. We never came to blows but there was a shouting match. I revealed a side of my personality I call Petty Officer [me] When Petty Officer me comes out it is loud, it is scary, and I do not hold back. I told George his presence was putting everyone's certificates in jeopardy, I'd had enough of his gross negligence and incompetence, and he was lucky to even have this job because of the fraud he used to get the job when he was about to be fired from avionics for the same incompetence and negligence. I was so loud that the line techs out on the ramp heard me. Believe me, Petty Officer [me] gets L-O-U-D!!!
So that's it. George finally pushed me over the edge, I laid it all out for him, and I did it in front of management. Fortunately the mx lead was behind me, I still have a job come Monday. Unfortunately so does George.
I'm welcome to feedback/thoughts/opinions/comments/questions/concerns. I will not defend what I did as I have no reason to.
r/aviationmaintenance • u/17crossfeed • Aug 25 '24
2001 United Airlines Boeing 777-200ER N219UA c/n 30551 APU compartment. Pratt & Whitney PW4090 engine. San Francisco International Airport 2024.
r/aviationmaintenance • u/aezulo • Nov 16 '24
First time lock wiring on an engine, how did I do?
Not expecting it to have been brilliant, it doesn’t look it anyways. Any pointers or things I could’ve done differently would be massively appreciated!
It’s a decommissioned CFM56-7B.
r/aviationmaintenance • u/Slartibartfastthe3rd • Apr 30 '24
Lurker: Only window that looks this on a 737-800. Should I tell someone?
r/aviationmaintenance • u/solidwaist • Jun 17 '25
Guess the aircraft
Guess the aircraft
r/aviationmaintenance • u/AnarchyCampInDrublic • Nov 22 '21
The United flight I'm booked for is delayed because they need aviation maintenance since something broke (according to pilot). To a layman, I feel sketched out to fly, but to a professional, how safe would flying be?
I feel sketched out but that's because I don't understand aviation maintenance. To someone who does understand, can you put me at ease? Thanks.
r/aviationmaintenance • u/Internal_View_5734 • Oct 21 '25
What is this hole in the right engine mount of the 737 Max 9 and why is there what looks like high velocity fluid / mist streaming out of it?
It’s been happening since takeoff and we’re about 3 hours into a 6 hour flight so I suspect it’s not a problem, but curious what it is.
Video showing more detail / wider framing: https://imgur.com/a/8C7YS1b#h8ZYtpm
r/aviationmaintenance • u/PsyavaIG • Nov 15 '24
Yet Another Safety Wire Post
Okay so, Ive been critical of other peoples safety wiring lately and I figured it was only fair that I share some of my own that I did today.
These were practice on an engine. I did them all by hand without safety wire pliers, and for full disclosure I had 5 that I redid because of mistakes / too loose.
Ive never done this location before, the first one with the pigtail is how I am used to finishing a safety. They prefer the straight leg finish in this location
r/aviationmaintenance • u/Emotional_Buddy_1990 • Feb 27 '25
Brutally honest comments please
r/aviationmaintenance • u/Saltydecimator • Jan 25 '25
Different angled Cleco pliers?
Anyone have source of 90 degree pliers? Or what’s the solution when ya can’t get one in but ya wanna!?
r/aviationmaintenance • u/The_potato_girl • May 29 '26
Are engine run cards ACTUALLY worth it?
I've been chomping at the bit to be sent to either engine run school or the one of the various airframe classes that are offered. (Namely for resume reasons ATP since its becoming less desirable to work here the rest of my life.)
The kicker for being engine run qualified is that you are responsible for anything that happens to the plane while running.
Bird strike? Someone else installed something wrong and burns up your APU? Weather related event? (We do keep an eye on the weather if there's runs to be done and bad weather is in the forecast. Shit still happens.)
All on you.
There's no monetary incentive/premium for having any run cards here, just a skill, many thousands of dollars worth of training, and heavy risk.
Just curious to hear from anyone who does do engine runs.
Edit: Realizing things run a lot differently elsewhere, and I should probably seize any and all opportunities before bouncing.
r/aviationmaintenance • u/Fluffy-Mistake-5424 • Apr 15 '26
Second time doing safety wire
Just did safety wire for the second time want to get some others opinions on it as I got passed by my instructor. Also all the twists were done by hand as that was the requirement
r/aviationmaintenance • u/Specific-Impress3429 • Sep 10 '25
Avoid NVOC and their long waitlist
This program is gatekeeping at its finest. Once you get in, the instructors don't care at all. They know that the A&P program has a long waitlist and they're using the leverage to their advantage. 2 failed test attempts and you're out. Doesn't matter if you're at the end of general or all the way through powerplant. Besides that it's ran by LAUSD so they run it like a high school. Locked gates all day, barely any time to eat, short breaks. They know people are waiting, so once you get in they'll hold it over your head. They have behavioral contracts to keep you "in line" if you ever come late, 3 strikes, you're out. They're trying to wash as many people out so they can look competitive for the FAA, but realistically it's just a facade. They won't care about educating you. You'll be lucky to make it past general after all the time you sit on their waitlist. I feel so screwed over by this school...
r/aviationmaintenance • u/[deleted] • Feb 17 '25
i want to become a aircraft mechanic but don’t know where to start, also curious how much i would probably be making
r/aviationmaintenance • u/Happy-Draft • Feb 26 '24
Can someone explain
Can someone explain why this panel slides open when landing and braking?? Are they able to use the engines as brakes?
r/aviationmaintenance • u/LALILULELO8 • Oct 04 '20
Airplane wing . Is this normal ? Bent ?
r/aviationmaintenance • u/Lazy-Tart3521 • Oct 31 '25
First time safety wiring, how are we looking?
Started safety wiring in class today for the first time. Any tips will be appreciated.
r/aviationmaintenance • u/lostmillenial95 • Aug 01 '24
Rate My Safety Wire!
Found during a tire change
r/aviationmaintenance • u/Extension-Raccoon481 • Aug 23 '25
Can AI actually do anything to reduce workload or is this all hype?
I've been reading a lot of business thought pieces about "The generative AI opportunity in airline maintenance" (e.g. an article from McKinsey with this title).
I don't know if I'm missing something, or if these people have just never stepped foot in a hangar.
They're claiming there is a ton of opportunity for generative AI to help MRO teams be more efficient. But in my experience, the inefficiencies don't really come from paperwork or documentation. Would love to hear what you all think. Am I missing something? Do you see a way for AI to make maintenance workload lighter?