r/arcteryx • Urvogel Jr. • Dec 20 '20

Meta Shell Selection Flow Chart - Development Project

Post image
678 Upvotes

104 comments sorted by

87

u/Astramael Urvogel Jr. Dec 20 '20 edited Dec 21 '20

Been thinking about doing easy decision flow charts for a few different product lines for awhile. Decided to take a stab at the shells first.

This is just a first pass, quick and dirty. What do you all think? What should I change? I'm sure we can create something that's easy to use and useful with this format.

Initial thoughts:

  • Has to be information-light, and easy to figure out for somebody that is new to Arc'teryx.

  • How do I mark the DropHood on the Beta AR?

  • I should probably do it 3-wide with the Alpha SV in the climbing column right? I just don't know of anybody who uses the Alpha SV for serious climbing.

  • Where does the Beta SL Hybrid belong?

66

u/Aaphex888 Dec 20 '20

I think arc'teryx should hire you man! I honestly don't know why they don't publish more stuff like this.

29

u/Astramael Urvogel Jr. Dec 20 '20

I don’t disagree with you!

8

u/Rusty_House Dec 22 '20

Little do we know, Astramael is the VP of Marketing for Arc’Teryx

4

u/Astramael Urvogel Jr. Dec 22 '20

I would probably be paid better than I am if that were the case!

3

u/WeekendGearGuide Dec 21 '20

GG, where you at! Hire this guy!

Excellent idea! Can’t wait to get the Beta SV decision added. I’m thinking in Heckin’ eXtreme -> Beta SV -> I’m a climber/mountaineer -> Alpha SV

15

u/Backbonz Dec 20 '20

Look forward to Ski/Urban. Assuming you haven’t done those yet.

8

u/Astramael Urvogel Jr. Dec 20 '20

Haven’t done the ski stuff yet, who knows it might end up integrated into this one.

The urban one I’m going to have somebody else specify because I don’t know anything about it.

13

u/onetermpeanutfarmer Dec 21 '20

Please pin this. I think you just took out the most Groundhog's Day part of this sub!

I would love if someone could do this for LEAF.

13

u/Astramael Urvogel Jr. Dec 21 '20

Once I do the insulation one that defines the decision points between the Atom and the Proton, then it’ll be a brave new world!

Also, yes a LEAF one would be cool. But that won’t be my doing, I’m not familiar enough.

2

u/iammortalcombat Dec 21 '20

Seems like it would help remove some of the this other that posts between the two. The issue is that many seem to think lt and fl protons fit differently and they do not. It’s the difference in insulation. My proton lt and atom ar actually fit me the same too. Never understood all the back and forth.

1

u/MtnHuntingislife Dec 21 '20

LEAF would be a different Flow IMO. It is a PCU kit, only a few options for each level. If/then, and/or for each level would make more sense to me.

1

u/onetermpeanutfarmer Dec 21 '20

LEAF would be a different Flow IMO. It is a PCU kit, only a few options for each level. If/then, and/or for each level would make more sense to me.

I would guess you are right. With that said, there are probably more universal applications for LEAF gear that don't fall under combat or stolen valor (particularly in the less typical service colors, like Wolf Grey), but I have yet to see LEAF gear on the shelves to know that for myself.

Arc mainline generally makes sense once one figures out the rubric and that more expensive does not always mean better suited for one's needs.

1

u/onetermpeanutfarmer Dec 21 '20

be

Yes! It will be only forward from there (minus flex pics)! Very excited for this.

8

u/Hydroptic Dec 21 '20

Amazing work.

Any chance we can get one for midlayers? Atom, Proton etc.

8

u/Astramael Urvogel Jr. Dec 21 '20

This is going to happen for insulation. After I get the format sorted out for the shells.

3

u/[deleted] Dec 21 '20

In addition to pit zips, one of the significant differences between Beta FL and Beta AR is the significantly closer fit of the Beta FL, isn't it? That would be important for layering.

1

u/Astramael Urvogel Jr. Dec 21 '20

Fit is definitely a decision point for some people. Do I cover fit here? Hmmmm...

1

u/[deleted] Dec 22 '20

It seems like it’s definitely one of the main aspects intended to differentiate the AR and FL at least. They have different numbers in the layering system.

10

u/Nomics Dec 21 '20

You should add a line from the Alpha SV > but I like hand pockets > Beta SV

And I agree, no one I know who does serious alpine climbing uses the Alpha SV.

5

u/BaronsDad Dec 21 '20

It's too burly of a shell in most alpine climbing situations. Unless it's your profession, why are you subjecting yourself to horrible conditions for that long? That said, I have one and have made dumb mistakes in white out conditions that delayed getting home where I was glad I had the gear that I did.

6

u/Nomics Dec 21 '20

Even for awful conditions Goretex is Goretex. Anything with the membrane is totally wind proof and has the same waterproofing, whether it’s the Alpha SV or the Zeta FL. Really it’s about the abrasion resistance.

Even the pro jackets are lighter than the Alpha SV at 80D because they need packability as much as durability.

5

u/iamda5h Dec 21 '20

not quite... my marmot 3L goretex active shell with polyester face fabric is noticeably worse at keeping the elements out than my alpha fl with nylon face and better hem.

3

u/boyinthefog Dec 21 '20

You're right .

The only jacket I have ever seen that is burlier then the Alpha SV, is the 2015-ish north face L5 , the green colored one.

1

u/Staying-in-Vancouver Sep 10 '22

There was a Heli Pro a few years back that had a 150D face.

4

u/r5437 Dec 21 '20

Dude, this is a great idea. Well done!

1

u/Nerdy_Slacker Dec 21 '20

This is great! I think the difference between beta AR and SV is more about the hood than the hem length. So maybe make that decision point something about layering hoods underneath instead? Or just straight up say “I prefer a storm hood” or something like that.

2

u/Astramael Urvogel Jr. Dec 21 '20

StormHood vs DropHood is indeed a large decision point. One I have to address in a revision.

1

u/iamda5h Dec 21 '20 edited Jun 03 '25

plants telephone resolute fuel wise existence plant grandfather summer lavish

This post was mass deleted and anonymized with Redact

2

u/Astramael Urvogel Jr. Dec 21 '20

The alpha AR has a longer hem than the beta sv.

Which is a bit weird. It looks like they made the Beta SV shorter since last generation? That or my table from before is wrong.

I would start at Alpha FL since it's the cheapest dedicated shell

Disagree. The Beta FL is, in my opinion, the entry point into the lineup. It is the closest to what the general population sees in a shell, and probably the most versatile. Eg. most people don't buy a hard shell and expect it to come without hand pockets.

Love the other guys comment of 'do you really need pit zips'

Embedding these discussions into the sheet is... an interesting challenge. I am thinking about how it might be done.

2

u/adventuremuffin Jan 02 '21

I never got past the Beta FL in the decision making rubric.

1

u/Astramael Urvogel Jr. Jan 02 '21

I think many people probably won't, and that's good!

1

u/iamda5h Dec 22 '20

I havent looked at the stats every season, but generally the alpha garmets are longer since they are designed for alpine climbing. Alpha fl is longer than beta fl for example. May also be a way for them cut weight from the pocket heavy betas.

24

u/IyamNaN Dec 20 '20

First, I love it. Something like this has been floating around my head for a bit.

I might consider some outlinks to content such as “are you sure you want pit zips?” As most people think they know that they do when often it is not needed.

Other dimensions I would add, “do you often stack multiple jackets with hoods” which precludes drop hoods.

6

u/Astramael Urvogel Jr. Dec 21 '20

Hmmm... something that crossed my mind and is considerably more work is more of an infographic style which integrates that sort of information. Not sure I have the time these days but I can mull that over.

Otherwise yes, that simple decision point for DropHood is very useful. I will see about remapping some things for V2. Tying features to activities and behaviours is the goal here.

4

u/IyamNaN Dec 21 '20

Yeah. This additional work was why I never started it. But seeing this, it is clear perfect is the enemy of good.

12

u/Astramael Urvogel Jr. Dec 21 '20

Truly.

One of the things I’ve found is that people are super bad at making an initial thing. But super good at criticizing a thing they see. I find this a very useful behaviour because it means that all I have to do is make something quick and dirty, and then listen and everybody helps make it great.

3

u/IyamNaN Dec 21 '20

100% agree on this.

1

u/[deleted] Dec 21 '20

I don't know, I encourage pit zips, I don't like smelling my friends.

3

u/Cicada17 Dec 21 '20

Nice job. I like that you kept it simple and not clog with overdescription.

2

u/Astramael Urvogel Jr. Dec 21 '20

Simplicity is, I think, absolutely key for this to work. People are recommending a lot of additional information and much of it is very useful.

We'll see how much I can add before it feels bad.

3

u/Spark217 Dec 21 '20

Love it if you could also have a trim/fit aspect to this. Not sure how you’d work it in. Maybe as a side data criteria

1

u/Astramael Urvogel Jr. Dec 21 '20

Yes, fit seems to be one people are interested in. There’s basically just two levels of fit here, so maybe it can be made to work?

1

u/Spark217 Dec 22 '20

Yeah, the issue is that fit for tech wear is dependant on the layering system they intend you to use. I tried on a Sabre yesterday and the large was too large, the medium was too restrictive.

4

u/ChiefJoJo74 Dec 21 '20

This is terrific. It hits most of the key criteria. I’ve thought of a similar thing which added hoods, pockets, abrasion and packability dimensions.

You could argue pocket placement is a function of using a harness or not making that moot in your graphic. I do think we’ve seen enough questions about hoods, abrasion and packability that it makes sense to weave those in... “want pit zips, abrasion resistance but strongly prefer separate hood and collar -> Beta AR.”

3

u/Astramael Urvogel Jr. Dec 21 '20

I’ve thought of a similar thing which added hoods, pockets, abrasion and packability dimensions.

I will have to analyze that post for more information, thanks for the link!

You could argue pocket placement is a function of using a harness or not

You definitely could argue that, and I don't think it's wrong. I personally don't care for hand pockets on shells even though I don't usually use a harness. But I think the point stands.

I do think we’ve seen enough questions about hoods, abrasion and packability that it makes sense to weave those in

Hoods yes, packability maybe, durability I really just don't think anybody actually needs to care about. The 40D nylon GTX Pro is enough for basically everything most people do. 80D is just so extra, and the Alpha SV's 100D, what is that even for? That said, you're not wrong that people definitely do want to know about it!

8

u/PocketG Dec 21 '20 edited Dec 21 '20

Nice job, this is a pretty complete flowchart of all the jackets I don't like the feel of and have zero interest in buying. 😅

I'm more of a softshell/fuzzy/ski/windbreaker/urban/runner type of fanboi. Fairweather climber, if you will.

I really only wear obnoxious loud, scratchy crunchy hard shell goretex when it's raining/snowing.

6

u/johnflstf Dec 21 '20

PocketG, while I LOVE his chart idea, I completely fall into your camp. I hate the sound and feel of wearing a potato chip bag, er, I mean hard-shell. Would you mind sharing which jackets you prefer and what you like (and if applicable don’t like) about them?

11

u/PocketG Dec 21 '20 edited Dec 21 '20

In no particular order :

Fuzzy Fleeces: Polartech High Loft is my jam. This is the ultimate touchable fuzzy fleece.

-Mountain Hardware Monkey Man Fleece and Pants. You literally become a furry monkey if you wear this. https://www.mountainhardwear.com/p/mens-polartec-high-loft-jacket-1858721.html?dwvar_1858721_color=233&pos=0

-North Face Campshire Pull Over. I own two of these. Prepare for people to want to touch you. https://www.thenorthface.com/shop/mens-campshire-pullover-hoodie-nf0a4r5d?variationId=R70

Strechy Zipups: Polartech Power Stretch is the shit. Kyanite Hoody/Jacket, and Rho Ar are made from this stuff and I love it. Just lite fuzzy stretchy awesomeness.

Outerwear: A lot of windbreakers are swishy plastic, These are not. Best soft technical hand feel: Gamma (Fortius), Solano and Trino (Goretex Infinium). Good technical hand feel: Nuclei, Argus, Squamish.

Stuff that goes without saying: Proton, Atom, Cerium, Thorium.

Pants: I live in athleisure, 2 way/4 way stretch. Mostly running/yoga/travel pants. Lululemon, Cotopaxi, Prana. The best damn comfortable/durable pants right now for everything from climbing, work, casual, chilling, are the Prana Stretch Zion Straight Pant, imo. These are seriously good pants. I don't know which arcteryx ones are like these, but if they make some, I'd get them.

Baselayers: SmartWool. Merino wool. Thin 100/150 type and thick 200/250 type. It's expensive as hell, but it doesn't stink. I also enjoy synthetic stuff like Odlo. The Army issued me some synthetic long underwear called the GEN III ECWCS system. I've had it for over a decade and it's still amazing stuff.

Fun stuff to have:
If you live where it's really cold: Fleece lined pants or straight up Fleece pants. Also fun as hell....Down puffer pants. Are you man enough to rock these in public as outerwear? https://www.mountainhardwear.com/p/mens-ghost-whisperer-pant-1871181.html

I live in southern Japan and commute on foot or by bike. My goretex rain setup is Refuge jacket/pants from Showers Pass. My skiing kit is a Saber suit. Being military over the last 15 years I've been issued so much crunchy goretex that doesn't breath and just turns into a billowing sack of sweat. I've had to wear that shit during hot and humid monsoon seasons in South Korea and typhoons in Japan. So I really hate gear that conjures up bad memories of ill fitting hoods, fogged up ballistic eyewear inserts, and sweating buckets just from walking.

My current branch just allowed us to start carrying umbrellas. Real talk. If Arcteryx made a $150 umbrella that was sturdy enough to withstand 20-30 mph winds blowing off the sea of japan, I'd buy it.

3

u/johnflstf Dec 21 '20

PocketG, wow! Now THAT is a reply. Many thanks for your insight. I completely agree with your assessment of Polartec Power Stretch. I have the Kyanite, but didn’t know the RHO AR was made from it too! It’s now on my list to get. Let me recommend my absolute favorite... the Lorum Hoody. Same Polartech Power Stretch, but just a tad nicer imo than my Kyanite.

Just read up on the Trino and the SL Hoody version is on my short list too.

Another insight for you, my soft-shell-loving brother from another mother... I have and like my Gamma MX Hoody, but one of my first Arc purchases was the Hyllus Hoody, with its Polartec Power Shield O2 High Loft. These two jackets perform the same function, but I find the Hyllus twice as snuggly AND it has a longer rear hem (my only “Gamma gripe” is it’s shorter hem). As they are next to each other in my closet... I arrange my 35 Arc pieces by use (please forgive the shameful “flex”), I almost always reach for the Hyllus instead of grabbing my Gamma. Just a thought if you can find a Hyllus, buy it. Don’t think, just purchase. You can thank me later.

Let’s see, what else... ok, some jackets I own and have gripes:

Beta AR: I DON’T PREFER THE DROP HOOD BECAUSE I OFTEN HAVE HOODED MID LAYERS AND THEY DON’T NEATLY FIT INSIDE THEM. Oh, why was I SHOUTING? Because the Beta AR is so damn LOUD if you even move an inch, whomever your talking to won’t be able to hear you. (For the rest of you... PocketG is right there with me... yes, that was a GRIPE.)

Theta SV: Loudish, but not as rock concert awful as the Beta.

Ok, how about a GoreTex jacket you might, PocketG, be able to live with in a downpour. My go to shell is my Sabre Pullover. Partly because the colorway Nebula is awesome, but mostly because it’s a “softshell” GoreTex, it’s not nearly as loud as the “hard shells”. Nearly. (Shouldn’t matter if it’s a pullover or not, that’s just the model I have.)

...And no, I don’t think I AM man enough to rock those down puffer pants!! Lol!

Thanks again for the effort you exerted in replying to my question, PocketG.

2

u/PocketG Dec 21 '20

No prob, John. Got sober this year and lost 40lbs so its been a year of donating fat clothes and then trying to make the wardrobe one that sparks joy.

Many an afternoon I've spent walking around Tokyo and Yokohama fondling nice outdoor gear trying to find the stuff the feels best.

I'll check out your recommendations. Be well

1

u/johnflstf Dec 22 '20

Congrats on both!

2

u/Alternative_Bench_38 Dec 21 '20

Absolutely love this. But IMO the Beta SL hybrid is awful next to skin. Though that’s likely just personal preference about PacLite.

5

u/Astramael Urvogel Jr. Dec 21 '20

The upper parts of the Beta SL Hybrid are C-Knit (yoke and arms and underarms I believe?). That’s why I put it there. Also I don’t know where else to put it.

3

u/BaronsDad Dec 21 '20

I use mine as a rain jacket and it's my default shell when I go long hikes spring/summer/early fall. Low exertion. Long hours. Might rain/get windy. Gamma MX for similar low exertion hikes that's colder but snow is more likely than rain.

1

u/[deleted] Dec 21 '20

Where would Beta LT go?

2

u/Astramael Urvogel Jr. Dec 21 '20

Fundamentally the same jacket as the Beta FL.

1

u/[deleted] Dec 21 '20

This is great. Only thing is I think the alpha and beta fl are much better rt an zeta for emergencies as they are much higher quality and still packable. Otherwise perfect

1

u/Astramael Urvogel Jr. Dec 21 '20

While I agree that the Alpha FL is a phenomenal emergency shell, I do have to list the Paclite shells somehow. I wish Arc'teryx would just stop selling them.

1

u/Psycho1024 Dec 21 '20

Great chart for hardshells. However, for shells, should just default at Gamma LT and go on from there. So many people think they need gore tex this and that while a good simple softshell would serve them better for 95% of their use.

1

u/Astramael Urvogel Jr. Dec 21 '20

I think discussing the "to hard shell or not to hard shell" question is a bit beyond the scope of this concept. The idea is that if you're researching hard shells you walk the flow chart to figure out which to pick.

Does somebody need to make a decision tree for deciding to hard shell or not? Yes, somebody probably does need to do that.

Now I generally agree that people need hard shells way less than they think they do. Although I would advocate that the Squamish or Houdini Air are where most people want to be, not the Gamma series. But that just depends on what you're doing I suppose.

1

u/[deleted] Dec 21 '20

When does one need to consider the Beta FL over the Gamma LT? Asking because I’m about to buy a shell. This had me considering the Beta FL.

5

u/IyamNaN Dec 21 '20

Sustained Rain or heavy/wet snow, hard shell. Intermittent rain or light powder my snow, softshells.

My hardshell gets far more use in PNW than my soft shell.

1

u/[deleted] Dec 21 '20

Im PNW, ill go with the Beta then! Thanks!

1

u/IyamNaN Dec 21 '20

Awesome. Planning any activities with it or general everyday wear?

1

u/[deleted] Dec 21 '20

Cycling, carpentry and everyday use.

1

u/IyamNaN Dec 21 '20

It will work great, although cycling I find I want something cycling specific so it’s shorter in front and longer in back.

1

u/[deleted] Dec 21 '20

I don’t love riding in the rain, but maybe that’s part of the reason...

2

u/IyamNaN Dec 21 '20

Like all things being done in the rain, it’s a mindset. You are going to get wet, either from the outside due to rain or from the inside as you over layered. Accept it and the knowledge you are hardcore. 😀

Gore makes some sweet cycling jackets. Also, castelli/sportful make some nice wind stopper jerseys I prefer.

1

u/boyinthefog Dec 21 '20

But..but.. how do I get to stay on the beta fl?

1

u/Astramael Urvogel Jr. Dec 21 '20

It’s a good question! I must clarify.

1

u/iammortalcombat Dec 21 '20

Pockets...hip? Chest? 1,2, or more? May make it too cluttered but it would be helpful

1

u/Astramael Urvogel Jr. Dec 21 '20

The struggle between too much information and too little is rough. Hand vs chest pockets is definitely a strong decision point. Absolutely on the list of things to consider.

1

u/dylbeano Dec 21 '20

Wish I’d had this like 10 months ago

2

u/Astramael Urvogel Jr. Dec 21 '20

Perhaps tomorrow night, while I’m attempting to take over the world by altering the timeline, I can drop this post off in ten months ago for you!

1

u/Apocarion Dec 21 '20 edited Dec 21 '20

Awesome stuff, but which one do I buy to walk my dog in the park?

On a more serious note: Would it make sense to overlay the "core intended use" with this chart?

For instance blue, yellow and green for all-round, climbing/mountaineering and hiking. You could draw rectangles in those colors (can be faint) around all jackets, indicating what they are best used for.

Edit: Something like this: https://images.app.goo.gl/RNrLPtNog8HGdQDW6 without different shapes and added color legend.

1

u/Astramael Urvogel Jr. Dec 21 '20

but which one do I buy to walk my dog in the park?

You stop at the top, Beta FL! =D

For instance blue, yellow and green for all-round, climbing/mountaineering and hiking. You could draw rectangles in those colors (can be faint) around all jackets, indicating what they are best used for.

I think colour is out since I’m targeting colourblind users as an accessibility point. But symbols or patterns perhaps might make sense.

I’d like to cover blind users too which would mean being screen reader accessible as a PDF or HTML. Not sure how that works yet.

1

u/Apocarion Dec 21 '20

Makes sense. In science we usually try to use color blind friendly palettes for data visualization.

1

u/jrbake Dec 21 '20

Cool chart, I’m just not sure what to do with “start here with Beta FL” - go with that jacket if you have no interest in other features listed?

2

u/Astramael Urvogel Jr. Dec 21 '20

Yes. But that isn’t well specified. Needs tweaks.

1

u/onetermpeanutfarmer Jan 09 '21

I see the Beta SL selling out at some places. Is this primary for it providing the general Arc aesthetic at a lower price point, or is there a true gear superiority to it somewhere?

I see it indexed as next-to-skin, but know that PacLite is not particularly breathable. Does it present something that either an all Gore-Tex Pro or all Infinium piece could not do better?

1

u/Astramael Urvogel Jr. Jan 09 '21

Do you mean Beta SL Hybrid, or Beta SL?

1

u/onetermpeanutfarmer Jan 09 '21

Sorry, the Beta SL Hybrid. Did they make an SL this season?

2

u/Astramael Urvogel Jr. Jan 31 '21

Ooops, sorry, missed responding to this.

Sorry, the Beta SL Hybrid. Did they make an SL this season?

No, they didn't. It was effectively replaced by the Zeta SL a couple seasons back.

Is this primary for it providing the general Arc aesthetic at a lower price point

Yes I think this. It was strictly worse than something like a Zeta AR or a Beta AR. I am perplexed by the Arc'teryx need to fill in the lower shell price point. That's not what the brand is about? The new S21 Beta LT is filling that same niche. It's not really increasing the versatility of the product, it's not a Patagonia Pluma. It's a cut-rate product. At least it's better than the Beta SL Hybrid.

or is there a true gear superiority to it somewhere?

I don't think so, no. It was adequate for several things, but not the best choice for anything.

I see it indexed as next-to-skin, but know that PacLite is not particularly breathable. Does it present something that either an all Gore-Tex Pro or all Infinium piece could not do better?

The Beta SL Hybrid, if memory serves, was Paclite in the torso, and C-Knit in the yoke, arms, and hood. Basically anywhere skin would touch if you're wearing any kind of shirt. I think the mid-trunk is generally not that problematic for delamination, so it wasn't that bad.

I never really understood what the Beta SL Hybrid was for, and that hasn't changed. But I am glad it is gone because the new Beta LT is mostly a better product.

1

u/onetermpeanutfarmer Jan 31 '21

Thank you so much for this input! Your insights are always the best!

I think we approach when Arc makes new or revises products from the same two optics: (1) does the tech have some, albeit very niche at times, unique value or superiority, and (2) trying to get some semblance as to what the hell Arc has going on behind the wizard's curtain. FW20 was a weird season, but we can chalk that up to COVID for now.

To your point, the new Beta LT starts to put us back on the right path. This is not to say that there is anything revolutionary about the Beta LT outside of the fact that a jacket like this was not in their recent lineup despite it being the best solution for the huge push of new outdoor or tech casual folks. Again, not knocking the jacket as everyone needs a jacket like this (I have a ~2012 Zeta LT that is literally this: 3L Gore-Tex with pit-zips that may have more days against it than anything else in my closet). Just trying to keep my eyes open so we don't become like Apple super fans that are so dedicated to the brand that they go nuts over a feature that has existed in the market for several years.

3

u/Seaforyourself Dec 21 '20

Oh yeah! And while at it, one for pants would be great!

3

u/Rmccabe69 Feb 05 '23

I know this post is older, but as someone who is about to buy his first arc this guide was more useful then their website

2

u/adventuremuffin Jan 02 '21

I like how we just start with the Beta FL.

1

u/paleo_anon Feb 04 '25

What's the main difference between the Zeta AR and Beta AR? I'm looking for a summer backpacking jacket

1

u/Nothere2Troll Dec 21 '20

I’m waiting for more flow charts....

1

u/agnyc Dec 21 '20

Nailed it as a starting point!!

1

u/MicrowavedPlatypus Dec 21 '20

This is great! I’ll use this when buying my next jacket. Thank you.

1

u/quiverfull7 Dec 21 '20

Sublime - something you’d think Arcteryx themselves should’ve come up with a lot sooner.

Without begrudging sincere inquiries, here’s to hoping your charts defaff (unfaff?) the sub

1

u/AmeriJar Dec 21 '20

This is beautiful!

Please do this for every item they sell now!

1

u/Local_PotatoesDealer Dec 21 '20

You did the hardwork. Thanks for making it understable

1

u/GrindANB Dec 21 '20

I like this alot

1

u/eolewind Dec 22 '20

Hello,
This is a great idea and start! Thanks. I think you will help a lot of people. Here is a few thing you could highlight:

A legend chart specifying different of GoreTex Families by their quality. Most of the time it's the key difference between All Round (AR) and SeVere (SV) of the same family as an example/

For you arrows guideliens, options you could also add

"hike in moutains vs plains"

To define the shape:
example : The Zeta family (which is part of Traverse collection) is longer, great for shity coutrisides hike, such as scotland or forests. The Alpha is for alpine env. means harness, as you mentionned.
Also note that in mountain you want to wear a helmet under your hood.
You can't with a zeta.
"I wear a big bagpack or not" :

The SL and FL are not recommended for long haul trips with backbacks because of shoulders abrasion. But they are lighter, more breathable and ultra packable (heck the emergency stuff).
For a multidays trek shity weather, consider a AR or LT. from the next section.

"(Winter or high altitude ) vs (summer or high output)"

The AR is more for winter or high altitude (>3000m). But it is not breathable enough for high output or summer.
I think consider a SV as AR you will scratch against walls, unfriendly rocks, climbing equipment, skis edges, etc.

"How about mixed weather AKA it's raining, but not really"

This is where the GAMMA (softshell) series comes in ;-)
Or if you do some wither high output in dry conditions in the mountains, such as ski. it a plus.

You could highlight these family names color codes.

take care!

1

u/Astafanos Dec 26 '20

Would love to see a ski-specific flowchart mate!

1

u/kcdtx Dec 26 '20

Just wanted to give you props for this great piece. Can't wait for the next. ((Tapping fingers))

1

u/tsarles Sep 29 '22

Where does Beta LT fit in?

0

u/[deleted] Dec 21 '20

[deleted]

1

u/Astramael Urvogel Jr. Dec 21 '20

It might be!

I will definitely have to trim information of various kinds to retain its readability. We'll see what makes the cut!

1

u/[deleted] Dec 21 '20

[removed] — view removed comment

2

u/Astramael Urvogel Jr. Dec 21 '20

I didn’t do those charts yet.