r/ar22 • • May 24 '26

Count your days communist vendors

Thumbnail
gallery
6 Upvotes

Instead of being an indigent, lazy bootlicker doing backwards flips for third-party vendors, I’m making a vow: I will replicate and manufacture my own parts using OEM-grade equipment and methods. Why? Because when there’s only one source controlling the market, people start believing they need them. I’m here to prove otherwise. OEM for the win.

First, I’m starting by creating my own weight system. I’ll still buy the weight holders themselves, but the inserts and tuning will be mine.

Next, I’ll be experimenting with lighter recoil spring tension by trimming a few coils to improve cycling with standard ammo while running super safe.

After that, I’ll tune the firing pin spring slightly to improve primer strikes and reliability.

I also want to source a hardware-store replacement spring for the extractor so I’m not dependent on specialty vendors for simple wear parts.

As for the weights I’ve already made: I tested 4 mm, 5 mm, 6 mm, and 8 mm variants. None matched the snug fit of the BoreBuddy-style weights. After testing and comparing dimensions, I’ve concluded their inserts are likely around 7 mm to 7.5 mm. I still need to find a proper 7 mm casting mold, but for now I found a 7 mm tungsten rod on Amazon for around $20, and I may cut it down into custom inserts for testing.


r/ar22 • • Aug 26 '26

Had to

Post image
0 Upvotes

Had to put gloves on my Glee 😂 You never know, you never know! These are just some of my budget 80s. All 80s, too. In the next month or two, I’m gonna post some REAL eye candy 22lrs 😮‍💨🔥 Got a couple AR-22 builds I’m building gonna be pushing close to a few racks each. Stay tuned… y’all ain’t seen nothing yet! 💯


r/ar22 • • Jun 04 '26

22LR trips and weight carrier on sale at Dnt 37usd

Thumbnail
gallery
0 Upvotes

Just a heads-up: you don’t have to drop $100 right now with the communists lol. Jokes aside, I have two of these carriers—both aluminum versions—and both of mine have been tested and run reliably. I literally paid $150 for two of them last month, so at this price it’s a steal.

I actually made another purchase from Deez Nuts Tactical today because I need to swap my other 22lr Atrius setup over to a Super Safety.

I’ve run both systems, and I’m telling you this from experience—not from a profit standpoint—the Super Safety is better and much easier to tune. If you’re looking for something that’s almost plug-and-play, go with the Super Safety.

That said, I’m not going to lie: the Rise Armament trigger paired with the Atrius feels pretty solid. But I can almost guarantee you’ll get a Super Safety running exactly how you want it much quicker and with less hassle.

If you enjoy tinkering, experimenting, and tuning your setup, then the Atrius and BoreBuddy combination might be more your style. Both can work, but for simplicity, ease of tuning, and getting up and running faster, I’d choose the Super Safety every time.


r/ar22 • • Mar 18 '26

FRT for M&P 15-22?

0 Upvotes

Is anyone aware of a frt that would work reliably with a 15-22 rifle? Thanks!


r/ar22 • • May 14 '26

My borebuddy 21-in apogee match barrel

Thumbnail
gallery
0 Upvotes

I I know it’s hard to fully tell from the photos, but I did my best to show the issue. In person, the problem is much easier to identify.

I bought this barrel about two years ago, but during that time I was in the middle of moving states, so I never had the chance to properly test it until recently. After finally getting some range time and troubleshooting done, I found that the barrel is unfortunately not 100% in spec with the CMMG bolt setup.

The main and honestly only issue I have is reliability. Everything appears normal at first, and it will usually feed the first couple rounds, but after that the rounds stop fully seating. After extensive testing, I believe the barrel sits slightly too high in relation to the CMMG feed ramp, causing the rounds to nose jam instead of feeding cleanly into the chamber.

I have tested this with three different .22LR bolts, several magazines, and multiple setups, and the problem remains consistent across all of them.

At this point I was honestly considering giving up on the barrel entirely and just purchasing a complete kit from JP Enterprises so I wouldn’t have to keep mixing parts from different manufacturers. Considering I paid around $425 for this barrel at the time, I could have bought the JP kit instead and likely would have been much happier overall.

To be clear, my complaint is strictly about reliability and fit/function. Accuracy was never my concern.

I also want to be upfront and honest that I did attempt to modify the barrel myself by working on the feed ramp area to try lowering it enough for proper feeding. I fully accept that I likely botched it trying to make it work.

That said, if BoreBuddy is willing to help me out with the situation, I am more than willing to pay compensation for repair or correction. I’m not asking for anything for free. I’d gladly pay up to around $125 if the issue can realistically be corrected. If not, I’ll probably move forward with the JP Enterprises kit and call it a learning experience.


r/ar22 • • Jun 21 '26

FRT not needed

0 Upvotes

After spending thousands chasing reliability, I’m switching to a binary trigger setup. My goal is a suppressed .22 AR that runs subsonics without special springs, overpriced bolt weights, or constant tuning. Using a standard CMMG anti-bounce weight and keeping it simple should be less hassle and cheaper in the long run.

I’m also done supporting companies that, in my opinion, don’t put customers first and focus more on controlling the market than on customer service and fair pricing and not scamming

P.S. I’m referring to BoreBuddy⁠. More updates next week. I’m currently in the process of lawfully recovering my property and ending all business dealings with the company.


r/ar22 • • Oct 08 '26

BB 1:12 vs brownells 1:12 twist 5.56 I ordered 2

Thumbnail
gallery
0 Upvotes

Since BoreBuddy took me for my last Apogee 21” Precision barrel, I’m forced to order these and give them a shot. I’ll be testing soon! Stay tuned for the results. 💯


r/ar22 • • Jun 15 '26

☝️ borebuddy part required

7 Upvotes

r/ar22 • • Aug 23 '26

Do not buy eBay modulus arms end mills

Thumbnail
gallery
0 Upvotes

I tried the replacement end mills from eBay, and I do not recommend them.
In the past I had successfully completed at least 6–7 lowers using 1 OEM Modulus Arms end mills. I planned on finishing four lowers today, but after the first one went perfectly, the replacement bit started sliding in and out while I was milling the second one.
You can really see the quality difference in the photos of the end mills, and even in person, I can feel that the genuine Modulus Arms end mill is much more stout and robust. The replacement bits heat up extremely fast, and once they get hot, they become way too easy to move in and out.
Unfortunately, I had to scrap the second lower. Luckily, it was only a $50 lower, while the first one I completed cost me around $130. I’m just glad I got that one finished without any problems.
I even had a brand-new replacement end mill ready to go, from eBay in the photos of the 3 end mills. but I’m not taking the chance. I just ordered about $230 worth of genuine end mills from 80% Arms. Get the real deal—don’t try to save a few bucks on something like this. It can end up costing you a lot more.
As you can see in one of the photos, I started milling normally, but the bit gradually worked its way lower and eventually cut through the bottom of the frame.
Very disappointed with the replacement eBay bits. I’m sticking with the OEM stuff from now on. I do not recommend American gunsmith tooling off eBay. It’s not oem specification.


r/ar22 • • Jul 23 '25

SS shit show

0 Upvotes

I’m at the point I wish I would have just bought more 5.56 or waited on my Broad River barrel for the rdb 9mm. Got the cmmg bolt with the GMR 22 kitThe thing wouldn’t even work in semi no extraction, so I ordered the Bore Buddy reliability kit with the hardened extractor. Got it all put together and now it extracts, but I was getting light primer strikes so I ordered the bore buddy super strike firing pin. Put it in today and it’s still doing the same shit. I tried different ammo and got a few round burst followed by a dead trigger with a light primer strike. Even getting light primer strikes in semi. Tried adding weight and even cut a new trigger with less material taken off the left side. Same shit with both a black dog drum and the stock cmmg mag. Also had it not striping new rounds off the mags. What a shit show. Feel like throwing it all in the trash.


r/ar22 • • Oct 20 '21

Has anyone played with the new bear creek 22lr upper? Interested in the unique design and what components are cross compatible. Fed plane for attention

Post image
4 Upvotes

r/ar22 • • Mar 21 '25

Incase your looking for a Dedicated 22lr Upper

Post image
0 Upvotes

r/ar22 • • May 05 '23

Waxed ammo?!

0 Upvotes

When the hell had this become a thing?! I admittedly have not shot .22 in 10 years, but the CCI minimags I tried yesterday kept having issues until I realized there was wax all over the nose! WTH? Once I swapped to Stingers no feed issues at all. Since when did CCI start waxing their ammo, and what companies do not?


r/ar22 • • May 27 '26

Any current Borebuddy discount codes?

0 Upvotes

Looking at grabbing a FRT kit and it's a weight on the wallet for sure. Wondering if there are any coupons to save a bit of change. Thanks!


r/ar22 • • Feb 25 '26

Anyone know how to get in touch with Strangewaters?

0 Upvotes

Looking for anyone that has info on how to get in touch with Strangewaters. Looking for his trip as that seems to be the only reliable one but looks like he was banned (the SS mods are a bunch of cucks). Can’t find him on discord either.


r/ar22 • • Dec 26 '25

Hey 👋 BB

Post image
0 Upvotes

Woke up to a little extra cash, so I decided to put it toward something fun—another .22LR build. These setups are a blast and inexpensive to shoot, which makes them easy to enjoy and experiment with.

My girlfriend is working on her own build as well, she already milled her own lower out last night by herself with very little help from me. Hopefully I’ll end up with two over-the-top .22LR projects once everything is finished. One would be a 21 inch full size. My second will be a 4 inch barrel with the white lower for my last post and my girlfriend is a 16 inch Frankenstein 😭 I’m Looking forward to getting them dialed in and spending some time at the range.


r/ar22 • • Nov 12 '25

Finally in a free state and want an FRT / super safety, need help

Post image
9 Upvotes

Hey everyone I finally moved to a free state that allows these triggers and I’d love to put one in my custom build. It’s a CMMG bolt with their dedicated .22lr 16” barrel and it runs great and has been super reliable and I love it. But now that I can I’d love to put an FRT or super safety in it, I’ve dove down the rabbit hole a bit but I’m a bit lost and I was hoping you guys could recommend a complete list of parts to buy so I can get it running. Many thanks

Pic for reference


r/ar22 • • Aug 27 '26

Official AR 22 weight size

Thumbnail
gallery
0 Upvotes

The official size is between 6.4 to 6.2 mm on the large weight and officially 4.7 mm on the smaller weight 6.5 mm is too large to fit


r/ar22 • • Dec 16 '25

The bastard child of Black Friday

Thumbnail gallery
5 Upvotes

r/ar22 • • Jul 18 '26

Trigger kicker no bore buddy parts required

Thumbnail
gallery
49 Upvotes

Update: Within the next few hours, I’ll be showing everyone that you no longer need any BoreBuddy parts to run a Super Safety setup.
No expensive weights. No expensive upgrade kits. Just OEM CMMG parts.
I’ve tested this over the last 24 hours, and the results have been very promising it just works I have a few things to take care of first, then I’m heading out to grab more ammo.


r/ar22 • • 22d ago

New 1-12 twist barrels came in thank you Brownells

Thumbnail
gallery
13 Upvotes

Finally got some REAL quality barrels! Chrome-lined, superb fit and finish, F-marked front sight, bayonet lug, and all the extras on a 20” barrel. $205 plus shipping and tax. Brownells delivers quality that puts the competitors overpriced junk to shame. 💯 the total price was around 425 usd you literally get two for the price of his one. 🐗🤦‍♂️🐷🐽🐖


r/ar22 • • Jun 23 '25

AR-22 build

0 Upvotes

Looking to maybe build an AR-22, throw a can on it and give it to my wife for her first gun. Could use some help from everyone in here for a parts list. Not looking to go too crazy with price, more of a budget build


r/ar22 • • Dec 26 '25

Lead exposure

0 Upvotes

When cleaning my suppressor espicaly, I wear gloves and a respirator that’s rated for lead. Is my irrational fear of lead exposure irrational? I know these are good pratices but how much lead exposure do we actually get just opening a dirty supresosr and chuckin the baffles in the cleaner.


r/ar22 • • Sep 23 '26

Looking for Gunsmithing on a Beyer Barrel

Post image
0 Upvotes

I am working on my first AR22 build and I have a barrel on the way from Beyer Barrels. For those who aren't familiar, Mr. Beyer makes sleeved barrels out of 7075 aluminum. When I spoke to him on the phone, he assured me that because of the strength of the aluminum, the barrels can be drilled/pinned or dimpled for a set screw FSB just as you would a steel barrel. I want to go with the latter option for my build, but I am having a hell of a time finding a gunsmith who is willing to work on sleeved barrels (even after I give them the barrel specs and tell them what Mr. Beyer told me). Does anyone know of a gunsmith out there who has experience with aluminum sleeved barrels and would able to drill one dimple? Even better, are there any smiths on here who are able to? Unfortunately I don't have the space for the equipment to attempt it myself (or access to a drill press).

I've included the picture from Beyerbarrels.com for reference. Apologies to the mods if this isn't the right place for questions (I only ever used Reddit when GAFS was still a thing on here). Thanks for any insight!