r/ar22 • • Aug 25 '22

3D Printed Binary Trigger going strong!

100 Upvotes

45 comments sorted by

17

u/4lan9 Aug 25 '22

All 3D Printed except for CMMG conversion, barrel liner & hammer.
After 4 range trips with no issues I can confidently say my little printed binary trigger is functioning flawlessly. $20 total cost instead of $400 from franklin armory

3

u/werdnosbod Aug 25 '22

Take my money. You šŸ‘‘

0

u/[deleted] Aug 26 '22

[deleted]

4

u/4lan9 Aug 26 '22

not needed for binary triggers, only for FRT

7

u/PMSfishy Aug 25 '22

Put 10000 rounds through it. Report back.

RemindMe! 30 days ā€œbbbbbbbrrrrreetttttttttttttā€

5

u/4lan9 Aug 25 '22

I've probably put close to 600-800 rds through the binary trigger so far, easily 1k through this gun total. I have an older post in r/fosscad from when I got it working. I am just surprised how well it is holding up still.

Barrel gets pretty hot after two consecutive mags so I wouldn't want to continuously dump mags or anything, it is plastic. I think it really shines with 4 round bursts

1

u/OrneryCompany6038 Jul 31 '23

Are you using the invisibinary? How did you get it to work i haven’t made one yet but I’ve heard of people having problems with it, but heard the invisiboogle works great

1

u/AMIL89 Aug 01 '23

original account is banned for my liberal beliefs, this is my alt.

I got a milspec burst trigger, printed the disconnector and trip arm in PLA+. Then I anneal the trip nub with a lighter, which takes patience.

Assembly is frustrating, so you really need to keep a slave pin in it if you take the trigger out. Otherwise it will fly apart and you'll lose springs.

It is working even better today, likely due to me getting the rhythm figured out so I don't outrun the bolt.

1

u/OrneryCompany6038 Aug 01 '23

Awesome video! šŸ‘ Glad you’ve been having good luck with it I been on the fence of trying to make one or just getting the Franklin binary. A metal burst trigger? What disconnecter and trip arm did you use/find was it the invisibinary or a different one?

1

u/[deleted] Aug 02 '23 edited Aug 02 '23

[removed] — view removed comment

1

u/OrneryCompany6038 Aug 03 '23

Im still trying to learn how to use fusion360 just got it a couple weeks ago and haven’t had much time to learn how to use it yet there’s a lot to learn lol.

Thanks, I just ordered 2 of the busrts you recommended gonna give it a try before I buy a Franklin, I appreciate the help!

3

u/[deleted] Aug 27 '22

I did already I’ll save ya the wait. The invisiboogle (assuming that’s what this is) is great and it worked flawlessly for 1000 rounds. It definitely can be finicky though and takes some messing around to get it functioning perfectly

1

u/PMSfishy Aug 27 '22

10,000 not 1,000

1

u/[deleted] Aug 27 '22

🤣 no way it would work that long! That would be awesome though

2

u/4lan9 Aug 31 '22

I have no reason to believe it wont. There is very little stress on the plastic trip arm and it shows no signs of wear after ~800 rounds.

The only weak point is the selector switch. If you try to force it into safe with the bolt open it can break.

1

u/No_Fall5730 Sep 30 '25

Bro how much would u charge me to do it for my Glock 26

1

u/4lan9 Nov 10 '22

Reporting back, probably close to 1200 rounds in now. Perfectly intact

1

u/Carburetors_Are_Fun Jan 05 '23

What did you use for filament?

1

u/4lan9 Jan 05 '23

eSun PLA+

I really expected to need to replace the trip arm eventually, but it's still good! probably closer to 2k rounds so far.

only issue I face is the barrel getting super hot, so I use a 7.5" metal barrel now instead of a printed one with liner

1

u/4lan9 Jan 05 '23

at least 2k down.

Same plastic, nothing reprinted on the trigger. no signs of wear.

There is nothing I love more than being underestimated. I'll come back at 5k, then 10k :)

1

u/RemindMeBot Aug 25 '22

I will be messaging you in 30 days on 2022-09-24 21:46:29 UTC to remind you of this link

CLICK THIS LINK to send a PM to also be reminded and to reduce spam.

Parent commenter can delete this message to hide from others.


InfoCustomYour RemindersFeedback

1

u/mdzzzl5 Aug 27 '22

Where can I find files for the frt?

3

u/4lan9 Aug 27 '22

not sure, this is a binary trigger from Klaviermeister

1

u/UltraElite620 Sep 06 '22

Where's that link at

3

u/4lan9 Sep 06 '22

since the files contain different versions that are legally gray I will just say to google "klaviermeister invisibinary archive.org"

1

u/UltraElite620 Sep 06 '22

From what I see the only files I can find are the frt ones. The invisibinary one is not there.

2

u/910marv Feb 15 '24

Where can I find the files?

2

u/Phenryiv1 Aug 25 '22

I like it.

1

u/Tony_the_farmer Mar 01 '25

Is the gun 3d printed too

1

u/AdeptMushroom3977 Apr 04 '25

Where is the file and can anyone show me one

1

u/Canadian-gun-nut May 27 '25

Where can I get the files 😄

1

u/No_Fall5730 Sep 30 '25

Yooooo I need oneĀ 

1

u/[deleted] Oct 17 '22

Hey I’m in Virginia & it’s legal to own a binary trigger here. Do you think you could ship or sell me one ? I’ll dm you if that’s cool

0

u/NeopolitanLol Aug 25 '22

Any chance of selling one of these lol

8

u/4lan9 Aug 25 '22

inclined to say no just because binary triggers are illegal in some states and countriesYou can get an Ender 3 Pro at microcenter now for $100 after this coupon. Get a spool of PLA+ and you have all the lowers, grips, triggers, braces, stocks, risers, etc you can print.

r/fosscad is a good place to lurk if interested in the hobby

4

u/NeopolitanLol Aug 26 '22

Wait the printer itself is only 100$? I thought these were thousands

4

u/4lan9 Aug 26 '22 edited Aug 26 '22

It is normally $200, and is very much a budget printer. A very nice consumer printer (Prusa) is around $1k, but you aren't getting 5x the quality or anything

That said I printed my entire gun on the older non-pro Ender 3 that goes for $150 normally. You can get very strong, smooth prints if you put in the time.

2

u/NeopolitanLol Aug 26 '22

I thought prints were based on blueprints programmed into the system. What time are you putting in specifically

4

u/4lan9 Aug 26 '22

You get a model, then 'slice' it via software into code the printer can read. This is where you tell the printer how to print, based on the structural needs of the part. This can mean the percentage and pattern of the infill, or the support structures that allow overhangs to print. There are hundreds of settings to get the result you want in each use case

The time comes in with calibration, maintenance, learning the machine. You can just start printing with the default settings but might not have fully accurate part worthy of shooting bullets from

5

u/NeopolitanLol Aug 26 '22

Got ya. Thanks for answering questions!

1

u/Tripartist1 Dec 01 '22

you just gave me a reason to dust off and properly calibrate my e3 v2.