r/ar15 • • 3m ago

Like a sewing machine.

Post image
1 Upvotes

Awesome ejection on the mg.


r/ar15 • • 19m ago

Restless Rifle Syndrome: Year 3

Thumbnail
gallery
1 Upvotes

MMMMMMM. BUTTER.

A stick of butter for extra calories.


r/ar15 • • 1h ago

Right side bolt release issues

Thumbnail
gallery
1 Upvotes

Hoping y’all can help me with an old build of mine. POF-USA lower, battle arms BCG, Aero upper. The correct bolt release always works fine, but the ambi one only works some of the time.

When I press the ambi release it doesn’t move the bolt catch quite far enough down half the time, yet at other times it works. What I can tell for certain is that I’ve gotten it to work and not work with no mag in the gun and a full mag. Can’t get it to work with a empty mag or a low round count mag at all.

I’m getting this with Lancers, PMAGs, and EPMs.

Any recommendations?

Thanks much

Post edited for originally incorrect troubleshooting.


r/ar15 • • 3h ago

Crit vs SOLGW

Thumbnail
gallery
4 Upvotes

On paper, the SOLGW barrel should dominate the Criterion Core, I just want someone to tell me that they've seen it happen... The Sons is a stainless 416R, 1:7 twist, and the Crit is a 4150 CMV, 1:8 twist.

I've seen so many people shoot with this Crit barrel that I'm not worried about it performing well. But I have seen SOLGW mess up an entire lot of 6mm Arc barrels a couple of years ago, and I havent trusted their QC since that ordeal.

Anybody got some reassurance about SOLGW for me? Or should I just get the Criterion and tell myself I made the right call?


r/ar15 • • 3h ago

Who are some of the OEM barrel manufacturers?

5 Upvotes

Since many companies in the industry merely sell products made by others under their own name, who are some of the oem barrel makers. I know Rosco is out there as well as Green Mountain, FN, DD and Shaw. Who else is there?


r/ar15 • • 3h ago

Is a Warcomp horribly concussive?

Post image
10 Upvotes

r/ar15 • • 3h ago

Recoil Question

0 Upvotes

Classic reddit build
BCM 16 inch mid length upper
Aero Lower with enhanced Aero buffer kit

I feel like there is a lot of recoil no matter what I do, I thought it may have been a stance issue being a new shooter with the AR platform, finally got a few people’s opinion before changing the build drastically.

Was considering doing just a Sprinco BLUE spring before ordering an H2 buffer but am hesitant because my ejection pattern is right around the 4-4:30 mark and i’m not sure i want to change the way the gun cycles as it’s at the “ideal” ejection point, any tips would be helpful.

The few people who shot it thought it may be that i am shooting 62gr 5.56 x-tac PMC and that it may just be the robust round.


r/ar15 • • 4h ago

Looking for advice from the pros

Post image
19 Upvotes

Super 42 with H1 buffer or Sprinco blue with my current H buffer?


r/ar15 • • 4h ago

Buy or build a 12.5” upper?

Post image
8 Upvotes

This is my first and only AR — I got the 16” Zion 15 because I didn’t wanna deal with registering an sbr. Now that I’m adding a can I’m wishing I got the 12.5” version. My plan is to buy the 12.5 Zion upper separately at $750 from IWI (easiest), but I’m curious how you all would spend $750 on an upper?


r/ar15 • • 4h ago

Prism Optic Options w/Magnifiers

Post image
3 Upvotes

I know there are some other threads on this but it seems like it’s been awhile so thought I’d check and see if there might be some new gear out there I haven’t heard of yet.

Trying to decide on an optic setup for an 11.5 AR. In a perfect world I would do a dot and flip up 3x magnifier. However I have the ‘tism so dots on pistols are manageable due to shorter distances. Dots with magnifiers at rifle distances, not so much.

I know in the past people have put magnifiers in front of prisms with mild success but I’ve also been researching and it seems that while people have gotten this to work decent it can get weird with how the prism and magnifiers interact and having poi shifts.

At this point there’s pretty good chance I just end up going with a PA SLx micro but in just thought I’d check and see if there is any new stuff people are having luck with.

Thanks.


r/ar15 • • 4h ago

Would you ever use your AR 15 in a hime defense situation? If so, what is its length and is it supressed?

0 Upvotes

I always figured id just use a handgun in a hone defense situation. But im curious, is there any practical use for an AR 15 in a home defense situation?

My issue is the length seems quite cumbersome as well as the sound issue.

So im curious, would you ever use an ar 15 in a home defense situation? And if so, what is the length of your gun?


r/ar15 • • 5h ago

DD upper on homemade lower

Post image
14 Upvotes

r/ar15 • • 5h ago

Question on compatibility

0 Upvotes

Seeing if someone could answer my question on if a Palmeto state armory 10.5 upper would fit on ATI G15 MILTAC


r/ar15 • • 6h ago

First rifle

Post image
33 Upvotes

Picked up an M&P Sport 2 the other week and made some changes to it. Love the GWOT look that the FSB cutout gives. Taking a dremel to the delta ring was certainly the right call. Let me know what ya think about it!

Magpul Moe SLFDE
Magpul AFG 2 FDE
Magpul MOE+ FDE
Holosun ARO & 3x magnifier
Midwest Industries extended carbine hand guard


r/ar15 • • 6h ago

Took the heat and fixed my shit.

Thumbnail
gallery
11 Upvotes

Top dot shooting is gonna take some serious getting used to


r/ar15 • • 6h ago

Request help for rifle problem

Post image
3 Upvotes

Hello my English is ok. Please understand.

I have upper I get for good price but last owner break screw part into gas block. Now I cannot remove gas block.

How can I remove this piece. Thank you for the help.


r/ar15 • • 6h ago

Last day desperation…meat in the freezer

Post image
16 Upvotes

Last day of gun season desperation 123 yards. Ran about 30 yards double lung shot. 6.8 SPCII


r/ar15 • • 7h ago

To pin or not to pin?

0 Upvotes

So what’s everyones’ thoughts with pin and weld on a 14.5 Block II clone, as opposed to just filing a Form 1? Cost isn’t a factor in either direction, so I don’t want cost comparisons. I don’t ever travel out of state with my firearms, so that’s mainly the one reason I’m considering the SBR route. But I guess the flexibility to do so if an event ever arises, I’d like to not have to fill out a permission slip. I’m obviously already on the list with several cans, and different arms. So I’m not worried about being on a “list”. We all most likely are in some form. I’m not a huge fan of “permanently” altering my muzzle with the P&W, when considering changing cans or devices. I guess I’m kind of talking myself into the Form 1 route but there’s something still holding me back from just filing for it. I hate the fact of having to damage my receiver with information they already have. What would ya do? Do neither and just throw a brace on it and be able to swap out muzzle hosts at will?


r/ar15 • • 7h ago

Optics on a 16”, crossed eye dominant & astigmatism lol

8 Upvotes

Hi all. Just got my geissele super duty 16”. I’m a righty but crossed eye dominant with astigmatism. Would you recommend an LPVO or EOTech EXPS3 with 5x magnifier?


r/ar15 • • 7h ago

Ta01 over the ta02?

Post image
16 Upvotes

With this new forward BURT mount made by staker precision, would you rather have the weight savings of the ta01 over the ta02?

I have the ta02 but rarely use the illumination during the day. Also when I run it all the way back with the larue lt681 the battery knob gets a little cluttered with the charging handle.

What do you guys think? Ta02 still king or this ta01 might be the move?


r/ar15 • • 7h ago

20" SR-15?

2 Upvotes

Trying to build a better M16... I for sure just want the free float KAC and a 20" barrel. If I use a KAC SR-15 upper and lower, can I use a 20" barrel and gas system from wherever without having any gas problems? Edit: Looking to build MK12 quality but M16A4 Aesthetic. Any recomendations appreciated.


r/ar15 • • 7h ago

The ugly stock is gone! Went with the CAR15 stock a lot of you suggested.

Post image
136 Upvotes

(We have MK18 at home build) PSA AR15, stoner quad rail, KAC rail covers, promag vfg, Strikefire 2, chopped stoner carry handle, NBS cqc stock. Yes I had to dremel the quad rail for the KAC covers to stay in place.


r/ar15 • • 8h ago

Newest iteration of my first AR. Replaced my tube reddot with a 5x prism.

Thumbnail
gallery
23 Upvotes

I can't recommend the slx 5x scope enough, this thing is great for my astigmatism.

Planning on painting the red dot too but couldn't be bothered to tape it off today.


r/ar15 • • 9h ago

Hairline crack on freefloat handguard

Post image
0 Upvotes

I was inspecting a new rifle that I've already purchased and I noticed this small what appears to be a crack on the barrel nut side in the corner of the hex, of this freefloat handguard I'm wondering if this looks superficial or it may become an issue.


r/ar15 • • 9h ago

tips on a first rifle

1 Upvotes

i’m looking at buying a mk18 for
1.) aesthetics
2.) it’s been a dream rifle for a while

but based off what i’ve heard and been learning the 10.3 is dog water and i should aim for an 11.5

would any of y’all recommend i buy the mk18 because fuck it , then buy a URGi upper with a longer barrel so i could just swap the two?

i’m not well versed in rifles and i’m looking for advice on what to do , i’ve shot an m27, m4, and m1a6 when i was in the military but that’s about the extent of my knowledge