Two of my favorite Anschütz rifles, the 9015 ONE and 8001. Both tuned to 16J, both fitted with aluminum barrel caps to make them quieter, and both an absolute pleasure to shoot. Different generations, different designs, but the same outstanding Anschütz quality and precision. Couldn’t be happier with these two!
picked up this air pistol at a gun show today, and i wanna figure out more how it works, it doesnt have any cockback mechanism, but i gotta feeling the butt of it might be where id put a co2 cartridge. Any tips?
Cabela's will have both on sale for Black Friday. I've been wanting to get the Gamo Viper in .177 as my first air gun. It will be on sale for $200 plus I get another 10% off. The Komplete will be on sale for $190 if I recall correctly but the ad mentioned only .22 caliber. If that's the case I will go with the Gamo as I was planning on going break barrel. But the Komplete has me curious on the design allowing follow up shots without having to resight in but the downside being reliant on the Umarex N2 cartridges.
The goal is mainly chipmunk hunting in my yard and recreation aside from that.
My son is taking an interest in hunting. He always goes with me to rabbit and squirrel hunts. I currently have a Umarex Komplete NCR but its length of pull is too long for my 7 year old to properly shoot it. I was thinking of getting him the Umarex Notos Gen II. actual firearms are out of the question due to the regulations on the public lands we hunt (limited to air rifle or shotgun). How safe are pressurized air rifles? Can they explode? am i better off getting him a youth .410? Only asking because his moms a control freak and i would hate for something to happen to him.
So the boss lady went without my discretion and bought an M&P Smith and Wesson. I told to her to wait, I'm mostly pcp. It reminds her of her dad. God, did I hit the jackpot? What a crappy gun, but an amazing wife.
$40 pistol $20 moderator from Buckrail $15 laser sight from Amazon This is 80 shots from 20 feet on one CO2. Super fun plinker for $75 all in. Highly recommend
Picked this up as an impulse buy (they literally dropped a one off of the price!) and for $130 and some change out the door, I got it paired with a Barra 3-9x40mm airgun scope..
What a blast this thing is surprisingly accurate for an entry-level gun, and quite hard-hitting as well. I do not have any means to measure velocity other than acoustically using PRAAT with an old laptop. At 10 yd, average velocity is around 725 FPS (min 690, max ~800). I have Crosman hollow point, Daisy hollow point, JSB Hades Jumbo and Ruger Super point pellets to play with. Maybe I got a good one, but this gun is basically point and click. The scope holds zero surprisingly well given it's mounted on a plastic picatinny rail; I have not yet had to adjust the zero once I got it down. This one and my Hatsan Mod 25 Supercharger QE are my go-to's for a good plinking session.
One of these days I will get a top shelf springer and/or a mid range PCP (I want the Walther Blue Angel someday, I want to get into competition grade shooting and hardware). In the meantime, this thing is lots of fun!
35 yard zero with my Air Venturi Ascent .25 caliber barrel installed, first day using AGD 2nd gen dual bibod. Been using a for end, bench rest. Using a Chinese knockoff Leopold scope with the serial number B8888. But it's a pretty tough scope. Shooting JSB Exact King 25.39 gr. 12 shot group, no flyers.
Can I use a bag of sand or a log? Or a bunch of old clothes/carpet? No I don't have $25 for a real pellet trap. Shooting outside .177 @ ~1000fps. Not expecting any durability or reusability
I have here my pcp pump, the problem is it has leakage, how do I detect where the leakage is from, when I stroke the pump full force to my airgun, I have this farting sound, and not applying a single psi, can you help me? I can hear that sound from that gold colored screw thing(I have no idea what its called). Thank you
I'm not a stranger to air guns and pellet rifles, but I've only ever used them for small game hunting. Last year, I dove into the PCP world and picked up a .25 caliber Benjamin Marauder gen 2. It's a nice rifle, but I'm not sure if it's the right fit for me. Ive been following this subreddit for a while and I've set my sights on a Weirauch 97k in .22. My question is, would it be worth it to switch for hunting? Im not familiar with springers. I want to pick one up (ill keep the Marauder for sure) but Im trying to convince myself its the right move.
For starters, Im smaller-statured and my marauder is just slightly too bulky for me. I dont know how to explain it, but it doesn't feel like a good fit for my frame. Im looking for something that feels more comfortable. Would a 97k be an upgrade in this area?
Second, Im thinking about volume in terms of noise. The Marauder was marketed as one of the quietest PCPs but to me its a little too loud to be shooting in the back yard without the neighbors catching wind. I think the .25 was the wrong decision in this regard because I've heard the .22 and .177 are much quieter. From the videos I've watched, a springer seems to be significantly quieter and the 97k is one of the best in this sense.
Lastly, I want something that's dead accurate. My Marauder seems to dance around a little here and there and I dont get the consistency I want for hunting. I want a rifle that - if I miss - its on me, not the rifle.
What do you all think? Should I pull the trigger? * Pun intended.
So I got a new shoulder stock and urm a few other bits and pieces see how it goes am not keen on the red dot sight so I will try my best to set it up and get a zero then
I am looking to buy my first spring-piston air rifle, and I want to shoot without a scope (using only open/iron sights). I am torn between these models (all sub-7.5 Joules and .177 / 4.5mm caliber): • Stoeger RX20 Dynamic Wood • Hatsan Mod 95 Wood • WEIHRAUCH HW 30-S WOOD (this one costs much more, about €140 extra—is it worth it?) Should i consider others? Thanks in advance to everyone!
I'm using a Huben HB35 hand pump to fill a GK1 V3, with the supplied hose and threaded fill probe.
At around 20 MPa (200 bar / 2,900 psi) on the pump gauge, completing the downstroke becomes difficult. When I release the handle at the bottom, it rises by itself without me touching it. You can see this around 0:40 in the video.
After bleeding the pump down to zero, the full stroke feels normal again.
Is this expected behaviour for the HB35 at that pressure? Has anyone with the same pump experienced this?
A buddy of mine and I have a penchant for electric air rifles for plinking - I have a Barra 400e gen2 metal and a buddy of mine has the polymer version.
He sent me this with the insinuation that these can give us more range and higher velocity for long-distance plinking (he fancies himself a sniper).
I paid a lot for the barra so I told him I would stick to the recommended zinc-coated steel BBs. He is nonetheless purchasing them and thinks they will make his gun last longer since they are lighter and made of softer metal.
friend is looking for help with his gauntlet 2 that has been nothing but problems for him,
gun was lacking pressure ...forums said the regulators are problematic..
so i watched the hajimoto vid, built my own test rig/vent. and im still a bit lost..
if i fill my bottle to 2500 psi, it reads 2500 on the pump.. and 2500 on the bottle gauge, what is the optimal pressure i should read when i check the with the test rig?
once i get this figured out im installing the hajimoto tune kit as well
Hello people I know it’s a bit stupid but I’m only 3-4 months into owning my first pcp I’ve had my webly and Scott for a while just for a little fun. Please don’t judge to hard but how’s my setup
i recently discovered plinking with pneumatic/air rifles and i immediately was hooked.
One of my friends gave me his weapon to try, an Artemis GR1600W at 5,5mm and i loved the guns feel as it is very poweerful and i actually feel like i am holding a proper weapon apart from simply targeting down my sights. And they come as cheap as they get, so naturally i already have one on my hands.
Problem is, since i am new to this, i did not know that optics could be so sensitive to the gas ram platform. Apparently the forward motion of the piston may render the optic useless. So we got to go for a shockproof, airrifle dedicated option. Now THIS HAS TO BE BUDGET FRIENDLY, preferably under 150 EUR/USD.
I am currently looking at the Hawke optics, along with a dampa beneath it. Question is, what is the lowest price for a good, truly shockproof optic and may i ditch the dampa and just slap that thing on and be good to go? Other tips will be super useful and will have my eternal gratitude.
So, has anyone tried any optics for this (or any other) ridiculously powerful airrifle? If so what is your setup?
I really wanted to like this pistol but the trigger sucked so bad. Swapped out the sear spring with a lighter one and squished the trigger spring a bit and now it’s somewhere between decent and good. Decided I’d like it even better with a shoulder brace and, yeah, this little thing rules.