r/ZOTAC • u/JustClodz • 1h ago
r/ZOTAC • u/ZOTAC_USA • Jan 07 '25
Announcement To Gaming and Beyond - The all-new ZOTAC GAMING GeForce RTX 50 series
r/ZOTAC • u/ZOTAC_USA • Jan 07 '25
Announcement (Megathread) The ZOTAC GAMING GeForce RTX 50 Series
r/ZOTAC • u/Salt-Wrap3008 • 1d ago
Latin America [SOLVED] ZOTAC RTX 3060 fans stuck at 100%, GPU-Z showing 0 RPM — simple fix
I'm sharing this because I spent time troubleshooting what appeared to be a GPU fan controller or NVIDIA driver issue, but the solution was surprisingly simple.
GPU: ZOTAC RTX 3060 (original fans)
OS: Windows 11
Symptoms:
GPU fans would run at full speed as soon as Windows loaded the NVIDIA driver.
Fans behaved normally in BIOS and when the NVIDIA driver was uninstalled.
GPU-Z displayed 0 RPM even though the fans were running.
GPU and hotspot temperatures remained below 50°C.
Changing fan speed manually from 30% to 100% in the NVIDIA software made no physical difference.
At 0% fan speed, the fans stopped normally. At any non-zero setting, they immediately ran at full speed.
Automatic fan control behaved like an ON/OFF switch instead of adjusting RPM gradually.
Performing a clean NVIDIA driver installation did not solve the issue.
THE SOLUTION:
One of the GPU fans was physically blocked by a cable inside the PC case.
After repositioning the cable and allowing both fans to spin freely, everything returned to normal:
GPU-Z started displaying RPM correctly.
Manual fan speed control worked again.
Automatic fan control worked normally.
Both fans operated at the expected speeds.
No driver changes, firmware updates, or hardware replacements were necessary.
If your GPU fans are stuck at 100% and software reports 0 RPM, check that BOTH fans can physically spin freely before assuming a driver or fan controller failure.
Make sure to turn off your PC before inspecting or moving any cables.
Hope this helps someone experiencing the same issue!
r/ZOTAC • u/MajesticQuantity5608 • 1d ago
Europe RTX 5070 Ti AMP Extreme failing (Event 153 TDR + rattling fan) – Completely ignored by support via Email and Web Form.
Looking for help getting eyes on a UK RMA request for my RTX 5070 Ti AMP Extreme INFINITY. I emailed [email protected] on Oct 26 and submitted the website support form on Nov 9, three weeks total with zero reply or ticket confirmation.
The card is throwing constant nvlddmkm Event 13 (ESR 0x406018=0x80010000) and Event 153 (GpuRcReset) hardware crashes at idle, along with a failing, rattling fan bearing. I have the Overclockers UK invoice, Event Viewer logs, and fan video ready to send. Can a ZOTAC mod help get this routed to the EU team?
Quite frankly, it's a joke that I'm having to come on here in an attempt to get a response in the first place.
Europe Zotac rtx 5070 ti extreme infinity amp fans noise between 1900 and 2100 rpm
I discovered something wierd
The gpu was intalled on hyte y60 with gpu mount for like 11 months and works fine but i change the case recently to o11 vision and here i discovered a bad noise i thought at the beginning a coil whine but i dicovered that the problem in left and right fans
But when i put the gpu vertically and i change the case orientation the noise dissepears like it didnt exist at all
Soo i need to use a use a gpu mount but i need to know the main problem is the fans are dying or what?
Any idea can fix it at home without gpu mount?
United States Brand new 5080 No Tamper sticker/seal
Is it normal for zotac 5080’s in the U.S. to have no tamper seal? It was purchased brand new and works fine but it doesn’t have a seal anywhere. I found pics online of new ones without and some with a white circle sticker with letter P on one screw.
Edit** just to clarify I’ve had the card since new a year ago and it’s been amazing no issues. I’m not having warranty problems either. I’m trying to sell now and buyers are worried it’s been tampered with and I understand because alot of scammers selling bad cards with vram and cores removed. Annoying this never had a seal on it.
r/ZOTAC • u/gatorkea • 2d ago
United States RTX 4090 dead out of warranty. RMA'd Twice.
This will be the 3rd time my ZOTAC Gaming GeForce RTX 4090 Trinity OC has had problems. The first two I sent to RMA was found to defective according to the email they sent me. But this 3rd one is out of warranty. I have replaced every component on my pc even the case when troubleshooting the first RMA replacement. The problem is the same each time, I get freezes or crash during games or even on the windows desktop with nothing really running. Event viewer will show multiple instances of nvlddmkm event id 153 errors. The chat tech support told me this is uncommon for 4090's to die like this. But I seen quite a few post on this sub reddit where people had multiple RMA's with their Zotac 4090's. What can I do?
r/ZOTAC • u/Subwooferrrs • 3d ago
United States Only 6 of the 16 PCIE express lanes on my RTX 5090 are working
How much slower will it be? What should I do? I have attempted other motherboards and have gotten similar results .
r/ZOTAC • u/Manoelman • 3d ago
United States ZOTAC RTX 3070 Ti Trinity – Both Monitors Lose Signal Under Heavy GPU Load, Fans Ramp Up to 100%
Hey everyone,
I've been dealing with a frustrating issue with my ZOTAC RTX 3070 Ti Trinity and I'm trying to figure out whether the problem is caused by the GPU itself, the PSU, or something else.
The issue:
Whenever my GPU is under heavy load, especially in games with high graphics settings or demanding scenes, both of my monitors suddenly lose signal and display "No Signal".
At the same time, the GPU fans ramp up to 100%. The display never comes back, and I have to manually restart my PC to get everything working again.
Interestingly, this doesn't happen in every game. Some demanding games run without any issues, while others can trigger the problem.
My PC specs:
GPU: ZOTAC RTX 3070 Ti Trinity
CPU: Intel Core i5-13400F
RAM: 32GB DDR5 6000MHz
Storage: 2x 1TB M.2 NVMe SSDs + 1x HDD
PSU: Cooler Master 700W 80+ Gold
Windows 11
Things I've already tried:
Tested 4 different NVIDIA driver versions, including clean installations. No improvement.
Checked GPU temperatures and power consumption. They appeared to be within normal ranges.
Replaced the GPU thermal paste and thermal pads.
Tested different games and graphics workloads.
Confirmed that both monitors lose signal simultaneously.
I've been using this PC for approximately 3 years.
At this point, I'm wondering:
Could my 700W PSU be struggling with the RTX 3070 Ti's power spikes?
Could this be a VRAM, VRM, or GPU hardware issue?
Has anyone experienced similar behavior with a Zotac 3070 Ti?
Is there a reliable way to determine whether the GPU or PSU is responsible without randomly replacing components?
I'd really appreciate any suggestions or advice. Thanks!
r/ZOTAC • u/Defiant_Hawk_4731 • 4d ago
Asia RTX 3060 12GB after water spill: no POST, no display. Anyone have known-good rail readings?
r/ZOTAC • u/HelenaStrauss • 6d ago
Europe Attuali GPU
Vorrei sapere se secondo voi le attuali GPU AMD 9070 XT e 5080 Sono effettivamente adatte a essere usate in ambito lavorativo o restano soltanto prodotti da gaming?
r/ZOTAC • u/koushik-in-98 • 6d ago
Asia Identifying burnt IC on Zotac 1660 Ti"
gallery"Hello, this IC on my Zotac 1660 Ti is burnt. The markings appear to say 'P8 GUE'. Can anyone help me identify this component or suggest a replacement?"
Please help me😢😭😭
r/ZOTAC • u/PsychologicalLove180 • 6d ago
Asia New 9800X3D + RTX 5080 build (1 month old) now freezes after 5–10 min even in BIOS, and sometimes won’t POST
reddit.comr/ZOTAC • u/AHonterMustHont • 8d ago
Asia Dlss5 fixed my rtx 3070
Silly story. I bought the zotac magnus 3070 few years ago and after almost a year of light gaming one day the 3070 started running on x1 3.0 constantly. I have tried upgrade/downgrade bios, repaste/repad, reseat, deep clean nothing worked (I made a post here asking for a fix here as well). When plugged into my other rig it didn’t even boot up. Few years passed I kinda made peace with the fact that it’s unfixable, so it just sits there as a backup remote pc for my steam deck to save battery (even at x1 3.0 it is still a lot stronger than the deck especially at 800p lol). a few years go by then TW3 remastered drop and I thought why not try installing a dlss5 mod to see if it can keep up at 800p? While I was messing around with the dlss5 settings trying to optimize the framerate, the game had a soft crashed where the screen goes black for a few secs. Suddenly the framerate got a crazy boost when it came back on. I opened GPU-Z and it said x16 3.0. I don’t game on pc a lot nowadays but it’s so nice to have a small “steam deck support” pc that’s overqualified for the job lol. I guess the extreme heat from the tensor cores did some magic idk.
r/ZOTAC • u/HelenaStrauss • 8d ago
Europe Rip 5080 Extreme amp
Un abbraccio e un saluto a tutti i partecipanti di questo contenitore. Vi scrivo per sapere la vostra opinione in merito all'accaduto. Il 3 settembre convinta che fosse un ottima scheda, mi procuro questa Zotac 5080 Extreme Amp da un famoso e-commerce Spagnolo. Ora dopo dopo appena 2 mesi è andata a fuoco.
Il danno si è verificato sulla parte frontale della GPU, posta orizzontalmente, dove le fiammata è scaturita vicino l'angolo sinistro della parte alta, inoltre ha annerito anche il vetro. E-commerce ha provveduto a fare un controllo meticoloso, ma solo scritto
" Questi difetti non sono generalmente coperti dalla garanzia del produttore, in quanto non sono considerati
difetti di fabbricazione."
Ora va da sé che se non mi si spiega la motivazione del perché e come sia accaduto, contesto. Un conto poi è la garanzia del produttore, ma c'è poi il venditore. Pretendo in ogni caso la garanzia. Il tutto poi è successo mentre stavo utilizzando Crystaldiskmark.
r/ZOTAC • u/Guy_Sparrows • 8d ago
United States RMA Information Request
Hello.
I have a 5070Ti that has two of the 12v power pins recessed into the port so that the cable is not making a solid connection. The red light near the connector port is glowing red.
The card worked fine until I had to RMA my motherboard due to a BIOS issue. Upon reinstallation of the GPU, apparently two of the pins didn’t line up properly and were pushed in, no longer making contact with the power cable.
Is this something I can RMA and pay to have repaired, as I am almost certain it is not covered under the warranty?
Thank you.
r/ZOTAC • u/DADDYLP2123 • 11d ago
Canada RMA UPDATE PT2
Wellll it doesn’t get better unfortunately I made a post about a month ago or so about a RMA for my 5070 ti here’s what they gotta say about it. The previous email I sent to them was just asking why they have them in stock online to sell to people but have nothing for RMA’s this was their response to that and then the follow up with what’s going on with my card. Come to today this is what their response was to me asking for an estimated timeframe for the repair LOL am I being annoying about this? I honestly didn’t think it would be this difficult to replace or repair a 5070ti they are literally on shelves at pretty much all retailers how does the company themselves not have any idk let me know what yall think
r/ZOTAC • u/BalanceTrip • 12d ago
Asia 5080 temp concerns
Hey, my Zotac Solid Core Non Oc rtx 5080 is running a overclock of core clock- 300Mhz, memory clock-1500Mhz and power limit of 111%.
I recently started playing Onimusha Way Of The Sword and temps are hitting 77-81° while my power draw is 390-400w. I also noticed hot spot temps running in the early to late 90's with max temp hitting 100°C one time. Is that normal? Game is running at 4k Dlaa everything maxed no ray tracing.
For reference I also test cyberpunk 2077 4k balanced path traced and temps there were 72-75°C and power draw was 355w. While 007 first path traced was running close to onimusha numbers.
My drivers are Nvidia(617.17).
United States Error 153 nvlddmkm
Hola a todos, sinceramente ya no sé qué más hacer y agradecería muchísimo cualquier ayuda.
Estas son las especificaciones de mi PC:
GPU: Zotac RTX 5070 12 GB
CPU: Ryzen 7 7800X3D
Motherboard: ASUS ROG Strix B650-A Gaming WiFi
Fuente de poder: ASUS ROG Strix 1000W Platinum
Llevo bastante tiempo teniendo problemas con errores relacionados con nvlddmkm, Event ID 153 y Event ID 14, y no consigo encontrar la causa.
Al principio, los crasheos ocurrían prácticamente en todos los juegos. Después de investigar y probar varias cosas, decidí hacer un RMA de mi tarjeta gráfica con Zotac.
Después de aproximadamente un mes, recibí la tarjeta de reemplazo, la instalé y todo parecía haberse solucionado.
Durante los primeros 15-20 días no tuve absolutamente ningún problema. Sin embargo, después los crasheos comenzaron a regresar.
Lo extraño es que ahora son bastante inconsistentes.
Puedo jugar durante horas a juegos como PUBG, Rainbow Six Siege, Rust y Arma Reforger sin ningún problema. Pero cuando juego Red Dead Redemption 2 o algún juego similar, normalmente se crashea después de unos 20 minutos.
Los demás juegos también tienen crasheos algunas veces, pero es mucho menos frecuente. En ocasiones puedo jugar durante horas sin experimentar ningún problema.
Hasta ahora he hecho lo siguiente:
Hice RMA de mi RTX 5070 y recibí una tarjeta de reemplazo.
Cambié mi fuente de poder porque leí que los problemas de alimentación pueden causar estos errores.
Probé diferentes versiones de los drivers de NVIDIA, incluyendo instalaciones limpias con DDU.
Probé diferentes generaciones de PCIe desde la BIOS.
Revisé las temperaturas y aparentemente no son el problema.
Sinceramente, ya no sé qué más probar.
¿Podría ser un problema de la motherboard? ¿Inestabilidad de la RAM? ¿Una tarjeta gráfica de reemplazo defectuosa? ¿Algo relacionado con Windows o los drivers de NVIDIA?
r/ZOTAC • u/West_Tell_5422 • 16d ago
Europe Zotac 5080 solid core oc
Salve ragazzi, mi conviene fare oc ckn Questa? E quanto posso spingerla?
r/ZOTAC • u/Hericendre_________ • 17d ago
Europe 5070Ti - Octobr 2025 - 789€
I want 5080, i think then 5070ti is not for me