r/WheelBuilding • u/WarmClock5075 • Nov 11 '25
Trispoke wheels
Do you like it ?
r/WheelBuilding • u/Em0tinallyRetarded • Sep 07 '26
Recently did some major upgrades to my ebike (adding hydraulic brakes, second battery, 160 to 180mm diskbrakes, soldered a better throttle and added some slick tires)
I want to add this front wheel 1000w direct drive motor
But im stuck between a few options
1: drill new spoke holes
2: cross-over spoke pattern (left flange to right spoke hole and right flange to left spoke hole)
3: finding if theres a rim that while work with no modifications and ordering online
Are there any other options i have and whats my best bet?
r/WheelBuilding • u/Firm-Diamond-4454 • Sep 23 '26
Hi everyone,
I just received a new 3rd generation carbon-spoke wheelset. Unfortunately, the shipping box arrived with a visible hole punctured in it.
The wheels seems okay, but the included factory spoke tension report shows quite a bit of variance.
Could this possibly minor shipping damage bending the rim, forcing the factory tune out of whack?
Is it safe to ride as-is, or should I have a local shop de-tension and re-balance the wheel at the expense of a tiny bit of lateral trueness?
Thanks for any insights!
- Tuomo
r/WheelBuilding • u/Jack_Unknown1 • 14d ago
I have been attempting to get a reference wheel, I have previously aligned my stand and the wheel I used is still true and dished. Through the use of the flipping method. However I wanted to get a wheel as reference that doest nothing but be a reference. So I used a Walmart bike wheel. It has lock nuts and the original aligning wheel does not. During the process of truing and dishing the Walmart wheel. I saw that when flipped demonstrated a different reading then the other way around. One way at was perfectly true while the other it needed to be pushed to the right all way around. This was confusing and I was wondering is this something normal ? Since it's a front wheel. Moreover I have a TS4.3 if that makes a difference.
Also it is dished according to a dishing tool which is why the confusion.
r/WheelBuilding • u/AppreciatingBicycle • Mar 01 '26
r/WheelBuilding • u/becuz_race_car • Sep 26 '26
I really love the Campy Zonda wheelsets with 16 spokes and deep profiles. However, they are expensive. Could you hypothetically put half the spokes in a 32 hole rim and hub? Particularly, is there any safety issues with this? Thanks!
r/WheelBuilding • u/Character_Plenty_853 • Sep 18 '26
Ok this feels more confusing than it should! I'm trying to confirm if a standard 142mm wheel (already laced up with a rim) is installed on a boost frame, if the rotor location is the same? looking at this picture it looks like it would. Sure I'm aware that the rim would be offset 3mm towards the non drive side, and of course, it would require a 6mm axle spacing on the drive side to fill the gap to 148mm. In fact, it looks like all standards (including DH and Super boost) all share the same distance between the rotor mount and the NDS touchdown with the frame?
r/WheelBuilding • u/Dr-Salty-Dragon • Sep 09 '25
r/WheelBuilding • u/Clawz114 • Sep 09 '25
r/WheelBuilding • u/joeoram87 • Apr 08 '26
I’ve just built an Alfine hub in to a 20inch rim and noticed the nipples are are quite a right angle. The wheels are 3 cross. Is it worth rebuilding 2 cross to lessen the strain?
r/WheelBuilding • u/Equal-Still-2488 • Jul 03 '26
Hi all, I'm hoping to build my first wheel (rear, 40H) for my older Trek 330 over the next few months and feel pretty equipped between the work I've done with my bike so far, the tools I have, and the support I get from my local co-op. I'm looking for recommendations for a rim and hub to buy - I've listed out some specs and details on my use case below.
I've already looked at and am really interested in the Velocity Quill rim with one of their standard hubs. However, buying those new would be a lot more than I'd hope to spend and I'd also prefer to give this a shot with used pieces first as it would be my first build and I don't want to mess up anything I've splurged on.
Rim
- Rim Brake
- Supports 25-28mm Tires
Hub
- Fits 10 Speed Casette (Currently have Shimano CS - 4600)
- QR
General
- Parts I can find used would be ideal! I'd like to aim for $100-120 or even lower if that's possible without serious compromises to the quality.
- Silver would be fun to match my front wheel, but not necessary
- I'd choose an "aero" option over other considerations aside from what I detailed above
- Don't care about tubeless
My Biking
- I ride 60-70 miles a week for either commute or recreation, mostly the former.
- I weight about 200-210lbs fully dressed and I have a rear rack installed that I regularly load up with groceries, my necessities for a beach trip, random crap, etc. which adds like another 20-30lbs. Hoping to also get a front rack which would mean maybe another 15-20lbs at most.
- I said "aero" above because while I don't ride to train or race, I do just love going fast.
Thank you!
r/WheelBuilding • u/ImpressionAny8739 • Nov 01 '25
Long shot question here.
Does anyone recognize this bicycle team logo? It's on a ZIPP track carbon/foam wheel with tubular rim. Maybe early '90s, but that's a guess.
Just curious about the team and its history.
r/WheelBuilding • u/mampfer • Apr 22 '26
During the last service I saw that the bearings on the factory rear hub was severely worn/pitted from being too loose, and I thought about getting a front dynamo anyway, so I decided to go all the way.
I'm a fairly heavy rider and I also regularly carry groceries on the bike, so I wanted something robust, went for Andra 321 rims and Sapim Force for the front, Sapim Strong for the rear, 3-cross and 36 spokes per wheel.
Shimano DH-3D37-NT for the dynamo hub, and a Novatec D042SB, I could've gone with a Shimano hub for a similar price but I wanted to try the brand.
Today I cycled 17km and all seems to have gone well, but I've yet to check tension on the rear. I went by the guide on Sheldon Brown's website, and adjusted tension directly on the frame with a little 3D printed truing device on one of the stays.
r/WheelBuilding • u/Antpitta • Oct 08 '25
r/WheelBuilding • u/Em0tinallyRetarded • Sep 08 '26
Never shopped online for rims so idk where to look but i need a 20x4 fat tire rim that has a 10mm spoke offset since i want to lace a direct drive hub motor into it
but these past 3 days i havent found a single rim that is different. Do i have to have one custom made or do i have to find a bare rim and drill myself? (Seems like my only option)
Do yall know where i could find a 20x4 rim with a narrow offset? Anything under 10mm. A bit higher is fine but as close to or under 10mm is percect
r/WheelBuilding • u/velolentoWBK • Aug 13 '26
Lacing a rim-brake rim to a disc brake hub is a weird build, but its practical.
I laced a CR-18 36h rim to a PL-8X Shutter Precision Dynamo hub. The hub is the 12 mm thru-axle center-lock disc version. I used double-butted Sapim Race spokes. I have several bikes with different brake standards and I wanted an easily multi-use dynamo wheel, that would work with a 2023 Kona Sutra, a 1982 Univega Specialissima Touring bike with front disc brake conversion fork and 1990 Bianchi Tangent Cyclocross bike with rim brakes.
The Kona has a 12mm thru axel and disc brakes. On this bike the wheel works without adapters.
The Specialissima has the front disk conversion fork, but it has QR dropouts. It converts nicely with a 12 mm QR adapter,
The Bianchi accepts QR only and has rim brakes. I remove the disc, add the QR adapter and it works fine.
I chose the center-lock version because it doesn't look as weird as a naked six bolt mount when the disc brake is not installed.
I guess I'm sacrificing a bit of weight savings by lacing a rim brake rim to a disc hub, but I'm not bothered by that, as usually I use these bikes for loaded touring. Because these bikes already have their own wheels, I can simply swap in the dynamo hub for a trip and take it off when I need to. Als it works with all multiple bikes.
r/WheelBuilding • u/dedgedesign • Oct 07 '26
Hi,
I am an experienced builder, but there is always a first!
This time for me is : internal spoke nipples.
I have already serviced wheels with upside-down nipples (Enve…) but this time it is a clean sheet assembly. I am on the spoke length calculation step and I am wondering which NSD add-on I will add to the rim ERD.
The nipples are not decided yet, as the goal is to have the lightest wheel I have been asked for aluminium nipple. In that case I would chose the Sapim Upside-Down in 12mm
But I recomment brass nipple for corrosion prevention (it will be a carbon rim with tubeless tire and sealant, so corrosion will happen), so I adviced for a Sapim brass upside-down, 10mm should be sufficient.
In any case, it does not solve my issue : the NSD add-on. I do have the luck to have those nuts in stock so I cannot measure myself and ask for a help : what are the values you use, for which kind of nipple?
r/WheelBuilding • u/whimsiethefluff • Mar 12 '26
Hub: Shimano CB-E110. Ol' reliable.
Rim: Sun CR18, got it at a bargain.
Spokes: Generic galvanized, they were cheap.
Other notes: Spoke lubrification is finish line wet lube, and I used spoke washers as recommended for thin flanged hubs.
Feels pretty solid, should be a good replacement for my previous wheel (Sturmey archer S1C with mavic a319 and sapim single butted spokes) that was unfortunately stolen with the bike that it was on.
r/WheelBuilding • u/Fultonka85 • Sep 17 '26
Hello
I’d like to ask for your opinions on this.
I have a carbon rim that suddenly developed a significant S-shaped deformation from one day to the next. Maybe it was caused by hitting a pothole — I’m not sure.
I trued the wheel using the manufacturer’s recommended drive-side tension as a reference, and with the rim properly centered, I was able to get the wheel running straight. The tension distribution was within about 5% on the DS side and perhaps 10% on the NDS side.
However, when I install a tire, the rim deforms into an S shape again. This never used to happen before. This makes me suspect that something may have been damaged within the rim structure(?)
At the moment, I’ve fitted a standard clincher tire, which puts less pressure on the rim than a tubeless tire, but even this brings the deformation back once the tire is installed and inflated. So I fine-tuned the wheel with the tire mounted and managed to get it running straight again.
When I measured the spoke tension afterwards, the distribution ended up looking like this. Unfortunately, I don’t seem to be able to improve it any further without making the wheel run out of true again.
Do you think this kind of tension distribution (with tyre) between the spokes on each side is problematic?
r/WheelBuilding • u/pine4links • 16d ago
I'm building some fixed wheels and I'm getting 296mm for the front and 295mm for the rear. rather than buying two boxes of 20 each (for 80 bucks) I'd like to buy a single box of 100 296mm spokes for 50. Am I gonna have a bad time?
I'm using the Gran Compe 2 hubs, CR 18 rims. The CR18 is a double wall rim with about 4mm of space between the wall where the nipple sits and the place where the inner tube will be. It seems like it should be fine to me but these are only the second set of wheels I've built and a friend helped me buy the components last time. Any suggestions? I've used the QBP and the wheelbuildingkit.com calculators for this and they agree, though they give a measurement ~1-2mm shorter than what kstoerz suggests.
Thanks for the input, wizards.
r/WheelBuilding • u/Scott_Korman • Feb 21 '26
Title is not the best but I'll try to describe as best. Description first and then my background.
Truing a wheel just built from new hub, old spokes and old rim. Hub is exact same as the old one. 36h 3cross, no dishing. Wheel is now mostly true except for a spot where there is a sudden bump to the left. Usually this would coincide with one or more loose spokes on the right and/or one or more tight spokes to the left but in this case it is the opposite. : the tight spoke is on the right, right where the left bump is and if I pull it I get radial deformation. The spoke is already tighter than any of the other spokes.
I have very basic equipment including a Park Tool TM1 that I rarely use 😅
What do you do in these cases?
Background: I'm not a professional mechanic or wheel builder but I have been building my track bike wheels since 2011. My wheels are not the best but they are true enough and they stay that way
r/WheelBuilding • u/ZippierUser • Sep 16 '26
27 inch rigida chrolux rims with front a nos 1989 Normandy hub. In the rear a velo orange hub
r/WheelBuilding • u/hunka88 • Jul 28 '26