r/Walther • u/zigzagyag • Mar 26 '25
Yay or Nay? Canik slide on PDP frame
This is non functional BTW. Canik TP9sc slide & Suarez comp on PDP full size 4" frame
r/Walther • u/zigzagyag • Mar 26 '25
This is non functional BTW. Canik TP9sc slide & Suarez comp on PDP full size 4" frame
r/Walther • u/Dragnurb • Aug 17 '26
I went into a shop to pickup my suppressor and while I was waiting, I asked an employee if I could check out the PDP pro compact with an acro on it. Obviously, I wanted to test the trigger so I dry fired it about 10-15 times lol. I went to hand the gun back to the guy and when I made eye contact and gave him a head nod of approval he said in a stern manner, “yeah I think you pulled the trigger enough times". So a sad tale of an old fudd that doesn't believe in dry fire. And yes, the trigger was excellent I will probably get one
r/Walther • u/aerozona_dude • Aug 14 '22
r/Walther • u/ChiliSwap • Feb 08 '23
r/Walther • u/Tokarev490 • Jul 23 '26
My dad had a P22 when I was a kid, I adored that gun and always dreamed of having a P99. I thought and still think it’s one of the sexiest looking polymer handguns ever made.
Fast forward to today, I’ve held and inspected both the PDP compact and full size, and see them every day. In my opinion, they are one of the ugliest pistols currently on the market. I’m not at all debating their quality or shootability, but they have seriously fallen off in terms of visual appeal.
The slide looks way oversized, and I find the cuts to be way too big and obnoxious. Looks almost like something that would come out of Turkey. The grip ergonomics are good, but I hate that they’ve gone from the ambi paddle mag release to the standard button.
What happened between the P99 and PDP? Were they vying for some big military contract with its particular design, or something else? It certainly doesn’t look like the natural evolution of the P99.
r/Walther • u/cz-s2 • Feb 21 '24
So, as many of us have found out, following the YouTuber instructions for separating the two pieces of the slide release lever can cause irreversible damage to the frame. I talked with Earl at Earl's Repair service about the proper way to go about this. He said you should never use a hammer and punch to separate the two pieces. He has a fixture uses to press it out and not do any damage at all to the frame. He only charges $50 to do this. You ship your frame to him and he'll handle it and install what ever trigger you supply. This is much less expensive than a new stripped frame, a broken slide lever and the ffl fees. Earl's awesome. He told me to send him all my pieces along with the new Apex trigger I was trying to install and he would put it all back together and send to my FFL. Now, we need to quit giving stupid advice like "use a roll of tape as support and hammer it apart". Of course I was stupid for listening to y'all in the first place.
r/Walther • u/cmseay • Jan 25 '26
Dear Walther,
The vast majority of US consumers would like a new micro-9 rather than a fancy engraved gun or a James Bond kit boxes.
It needs to be the following:
- Thinner than the F series slide and grip (similar to the Shield Plus / P365XL size total)
- Shorter grip than the F series, with the ability to extend the grip with additional capacity rounds. MINIMUM 10 round capacity flush fit mags (preferably more if you can stress the form factor to hedge out competition)
- Ability to have a DPT-like trigger adapted to it
- Use the PDP texture
- Have an accessory rail for weapon mounted lights
- Be optics ready (should be a given at this point)
Sincerely,
A Walther fan
P.S.
Walther community, would you rather have:
r/Walther • u/Lopsided_Biscotti257 • 15d ago
First image probably shows best but there are definitely some pits that are etched into my PDP with ~600 rounds ran through.
I’m aware of the brass specs that coat the face and know that’s not the problem. It’s the actual steel dents on the breech face I’m pointing out.
Not sure if it’s fairly normal wear and to just keep running it or bug the warranty service over? Anyone else have this experience?
Haven’t had this happen with any of my other pistols and I haven’t noticed any crazy overcharged cases.
I run a 15 lb ultramass guide rod.
r/Walther • u/NotSmartNotFunny • Feb 15 '26
I somehow managed to chamber a 9mm in my PD380. It locked up "tighter than cat shit under the bed" as my father would say (still don't know what that means). I did finally manage to clear it safely. Note to self; one caliber per session from now on.
r/Walther • u/goodgamble • Aug 26 '26
Hey guys, picked up a steel frame 5" match for uspsa. Started with a rangekinetix carnivore holster and moved onto a kydex red hill.
This is the gun after a couple thousand rounds. I do draw from the holster and dry fire for a half hour or so every night. Is this level of finish wear normal? I've shot shadow 2s and Glocks before and neither have any wear like this.
r/Walther • u/SteeIersNasty • Apr 30 '25
I'm sure it's just about all of us here God this email but you really can't be this price!
I look at the price of the CZ Shadow Carry 2 and I laugh at it and I'm a big CZ fan. There's just no way I can justify paying twice the price of a PDP for it.
https://www.guns.com/firearms/p/walther-pdp-compact-4-factory-refurbished?i=245827
r/Walther • u/AutoModerator • Jul 10 '23
There is a rule in the sidebar, that is not a new rule, which reads:
no direct links to products for sale. No buying, selling, or trading. those links should go in /r/gundeals or /r/GunAccessoriesForSale
This rule exists because reddit (the website) very specifically says:
You may not use Reddit to solicit or facilitate any transaction or gift involving certain goods and services, including
Firearms, ammunition, explosives, legally controlled firearms parts or accessories (e.g., bump stock-type devices, silencers/suppressors, etc.), or 3D printing files to produce any of the aforementioned;
To be clear, do not ask for help finding any gun parts here. not a barrel, not a trigger, not a magazine.
There are 50 US states (and a handful of US territories) that each have their own gun laws. Not to mention all the other countries of the world. a 15-round PDP magazine isn't a controlled item in Alabama, but it is in Massachusetts. a PPQ gun barrel isn't a controlled item in the USA, but it is in many EU countries. None of us has any way to know where someone else resides. The safest course of action is not to allow these types of posts in this sub, so we do not. In the past this sub has been fairly lenient in this regard, but sadly cannot continue to do so.
One thing you can do, is make posts/comments in /r/gunsforsale or /r/GunAccessoriesForSale. those subs have been allowed to continue operating since Reddit clarified their rules and terms of service.
If you fail to read reddit's side-wide rules, if you fail to read this sub's rules, and lastly if you fail to read this stickied post, and you submit a post or comment asking for, or offering, help sourcing a firearm part, you will be banned from this sub. Anyone who finds this unfair or unacceptable should take it up with the site admins.
r/Walther • u/[deleted] • May 12 '25
So I just picked up the PDP pro acro model for work. I was excited as I’d seen many reports that the new models fixed the contact shot concern. I get that for most users this is a non issue, but for some of us it means our employer rejects it for duty use.
The fact that the trigger disconnect does not engage for the first 1/4” of slide travel (the movement before the barrel drops), even on the new models, will prevent this pistol from ever seeing wide adoption. I now have a $1100 gun which I cannot use for its intended purpose.
The fact that walther fixed this on the F series, but only made a halfassed fix on the standard model is a shame and I’m disappointed that in 2025 they can’t figure out how to make their guns as functional as designs from 40 years ago.
On a Glock, the trigger disconnect is in sync with the firing pin block. The instant the trigger is disconnected from the sear, the block is active. On the PDP the block activates before the disconnect, meaning the striker will fall, but not impact the primer.
Big sad for such a nice gun to shoot and look at.
End of rant
r/Walther • u/sandor47 • Nov 14 '22
Let me start that I know I am at fault with this, but I wasn't expecting Walther being like this.So I have Gen1 PDP and replaced the trigger. I was super accurate, made sure to not damage the frame. Yes I did confirm the frame was intact after the install.Let me say, I LOVE the performance trigger. So much so that I started going a lot more to the range, this thing is amazing. Put probably 7-800 rounds through it after the installation.
During the last range visit I noticed that the slide stop lever was a little loose, seemed like the left piece backed out a bit. Not much, just a millimeter or two, but enough to bother me. I tried to "snap" it back together with my hands (I am still at the range at this point) but ended up pushing the whole lever assembly and cracking that little wall on the frame that houses the right side piece of the lever assembly. My bad, should have waited until I got home.I contacted Walther to see if I could buy a replacement frame and the answer is no, pay $450 and we'll give you a new gun and take your old one in.I was kinda shocked because:- A: I can buy a new gun for $50 more and keep this for spares- B: Omaha outdoors has assembled frames for $399 (which is also atrocious), so getting just a frame IS an option, but Walther isn't offering this as an option.What will probably happen is, I'll try to look for a home remedy and abuse the sh.t out of the gun and replace it with something else, with better customer service/retention.
UPDATE: Earl Sheehan (Earl's Repair Service, Inc.) saves the day and Walther's reputation. Great gentleman to talk to, very helpful and offers a lightning turnaround time.
The empty frame that the official Walther guys could not sell me is $195.
r/Walther • u/rushncrush • May 18 '26
Outside of the pure shit and honestly embarrassing QC given the price. Plus the Questionable fit and finish.
I do not like my PDP PRO X PMM. Trigger is heavy and mushy. Especially compared to my other 7 pistols. Also the bounciest Comp/Ported 9mm I've ever shot.
The Grip? baby got back. I had to use the slim backstrap. Who's fucking hand is curved like a hill?
I've bought a lot of guns before holding or shooting them. Usually turns out good. I'll probably be using Walter's legendary return policy. But I've already been scorned by their legendary QC
I wanted a striker and went for the "King". I'll be sticking with hammer fired.
That's my spoiled cry baby take lol. But honestly it's just not for me.
r/Walther • u/Business-Customer-60 • Sep 29 '25
I was at the range today putting some rounds through my PDP and noticed that when I'd slap a fresh mag in, the slide would release, chambering a bullet in the same motion. I was able to do it consently when inserting the mags with force. This seems dangerous to me, although some may see it as a feature rather than a flaw lol. Any idea what would cause this and how to remedy?
It's a 4" PDP Compact with 15# ZRTS spring and 15 and 18rd mags.
r/Walther • u/hazcan • Mar 22 '25
Brand new PPS. I took it apart to clean it and the underside of the slide had this gold discoloration. Is this normal (or at least acceptable)? I haven’t seen it on any of the other guns I own.
r/Walther • u/Ok-Elephant4746 • Feb 01 '25
Do you guys mostly clean your gun yourselves, or have it professionally cleaned? Rookie here, slightly nervous about accidentally damaging my new toy!
r/Walther • u/TheMightyRasputin • Apr 26 '25
Just picked up this PDP Pro X, first time owning a firearm and mostly shot non-comped at the range so wanted to see if this was okay. When the slide is back there seems to be a lot play in the barrel and wanted to see if anyone here had insight. I assume it's okay as its all locked down with the slide forward but I know there's been some people having issues with these so thought it was worth checking.
Thanks!!
r/Walther • u/lmeats • Feb 21 '26
This is my first ever “bullet launcher”, so I have zero experience.
Got my PDP from a local dealer earlier, and it was their last one and it was on display. They said it’s still brand new, and I didn’t noticed anything back then. For one, I didn’t know what to look for, and also they are a reputable dealer. Straight went to the range and shot 100 rounds, and noticed these wears after came home.
Are these considered normal, or it’s just the gun needs some cleaning and lube? I suppose I couldn’t really do anything even if they messed me up, but it would be lesson learned.
Thanks!
r/Walther • u/Flamo90 • Mar 25 '25
I’m really trying to keep this full size pdp 5” lol. Don’t get me wrong it feels good in the hand but it does have a “top heavy “ feel with a x300. I liked it when I bought it couple weeks ago but Mann this slide is thick af. Really make me appreciate a Glock slide lmao.
r/Walther • u/63Rambler • Dec 10 '23
Tried to install an optic on my new Walther and apparently it needs an adaptor plate? With my Sigs I just bolt them on.
r/Walther • u/LostinAZ2023 • Sep 20 '24
I thought 9/20 was the date