r/Vz61 • • 33m ago

Collet HUB mount status?

1 Upvotes

Has anything been released on these yet? I'd love to nab one before Xmas.


r/Vz61 • • 55m ago

Working on a new dot mount. Need some measurements

1 Upvotes

Need some help guys. Willing to send a few samples for feedback once done

I'm designing a low top rail that sits behind the ejection port and I need a few measurements off a real gun. Calipers if you've got them, and please say which receiver yours is (CSA, Southern Tactical, original Czech, printed):

  1. Rear face of the receiver to the start of the ejection port, and to the end of it

  2. Ejection port rear edge to the rear sight

  3. Rear sight to the back of the receiver

  4. Width across the top of the receiver at the rear section

  5. Bonus if you run the wire stock: inside width between the folded arms, and how high they sit over the receiver

Thanks!


r/Vz61 • • 21h ago

New vz.61 Build

Thumbnail
gallery
45 Upvotes

Sharing my new vz.61 build. I received the transfer of my Czech Small Arms lower today and moved the upper receiver from the 3D printed lower I had made. Parts kit is from a painted easy build kit I bought online. I love the way it turned out. Let me know what you think.


r/Vz61 • • 1d ago

AoA barrel threading service

2 Upvotes

Should I select this option? Any reviews?


r/Vz61 • • 3d ago

AoA parts kit w/ original barrel vs the K-Var/FIME "Easy Build Kit" - same thing? Really "AR-15 easy" like klayco says?

2 Upvotes

First Skorpion build here, so go easy on me!

I preordered the Arms of America "VZ61 Skorpion Parts Kit w/ original barrel" (their SKU 1150): https://armsofamerica.com/vz61-skorpion-parts-kit-w-original-barrel/

Per the listing it's a matching kit, the original barrel stays pinned in place through the demil, and it comes with demilled receiver sections, one 10rd and two 20rd mags, the holster and the mag pouch. It's supposed to ship in early December.

The reason I went with this kit over the others is that AoA will thread the barrel 1/2x28 before it ships (it's an option on that same page), so it shows up pre-threaded. I know nothing about gunsmithing, and I don't want to do any kind of modification to the gun myself. No sawing, drilling, grinding, pressing, none of it. If it doesn't go together with basic hand tools, it's beyond me. I also paid for their Hand Select option for the same reason: I want the cleanest kit I can get.

For the receiver, I plan to get the Tortort 100% milled receiver that AoA sells for these kits, and build it as a semi-auto pistol: https://armsofamerica.com/gen-1-tortort-vz61-receiver/

What I'm trying to figure out is whether my kit is basically identical to the FIME kit that K-Var and Arsenal sell as the "VZ 61 Skorpion Easy Build Kit":

- K-Var: https://www.k-var.com/vz-61-skorpion-easy-build-kit

- FIME Group: https://fimegroup.com/store/vz-61-skorpion-build-kit

- Arsenal: https://www.arsenalinc.com/usa/product/fm-vz61-02/

That one is described as everything except the receiver, with the barrel assembly still populated. klayco says in his videos that building from that kit is "AR-15 easy". The AoA description sounds like the same thing to me, but AoA doesn't use the "easy build" wording, and a couple of their reviews mention 4 to 8 hours of work and a tight trigger group?!?!?!

Questions for anyone who has built one of these, ideally the AoA kit on a Tortort receiver:

  1. Is the AoA kit the same as the FIME/K-Var Easy Build Kit in practice? Same condition of the upper, barrel still pinned and populated, nothing extra cut?

  2. With the Tortort receiver, is it actually "AR-15 easy", meaning hand tools and an afternoon with zero modification to any part? Or is there cutting, riveting, pressing or fitting somewhere that I'd need a gunsmith for?

  3. If there IS a step like that, which one is it, and is it something a local gunsmith would do cheaply?

  4. What does NOT come in the kit that I'll need? I've seen the trigger guard rivet mentioned. Anything else?

  5. Does everything in the kit drop into the Tortort receiver as is, or do some parts get swapped or left out for semi-auto? Does Tortort supply those?

  6. One review on the Tortort receiver page says the buyer had to drill a detent hole so the hammer stop pin would stay in. Is that common, or a one-off?

  7. AoA says the 1/2x28 threading comes out slightly undersized because of how little material the original barrel has. Has that been a problem for anyone with muzzle devices?

Thanks in advance!!


r/Vz61 • • 3d ago

3DP FRT, I ordered the stainless steel model from them. I had to fit it a decent bit which is fine just like many other 3d stainless models. My main question involves when the hammer drops. Cycling the system very slowly, the hammer drops when the bolt is still about 1/16 from closed. Thoughts?

Post image
20 Upvotes

r/Vz61 • • 3d ago

Stuck Mag Release on TortTort Receiver and Arsenal Kit

Thumbnail
gallery
13 Upvotes

Boys, I need help.
Started assembling my tortort receiver and in 2nd step of building, the mag release is now stuck in the receiver flush. Seems like the finish and tolerance was too tight. I have tried everything from sticking it in cold freezer, tapping on it lightly without marring, oiling around to see if it would penetrate, picking at hole to try and remove with leverage and everything else I could think of without going to a gunsmith as the last option. From what I’m reading seems like some people just tap drill it out but I’m heavily wanting to avoid that as I don’t know where I would find a mag release button again.

Any advice or help would be greatly appreciated!


r/Vz61 • • 4d ago

Best aluminum lower for the factory wire stock

Post image
8 Upvotes

I purchased my parts kit a few weeks ago and it showed up thursday. My next dilemma is what lower to get. I want the best quality but i also want a full feature set so that i can run a rate reducer with a frt. Any experiences would be great.


r/Vz61 • • 4d ago

Gunsmith wants me to shoot it without barrel pin. Please weigh in.

4 Upvotes

Dropped off my upper to a highly recommended gunsmith to install my threaded barrel. I was confused when I got it back with no barrel pin, and upon inspection, seeing that the barrel shoulder hadn't been drilled either. I asked him about this, and he said he wanted me to "run a couple mags through it to make sure it was seated where it needed to be for everything to function correctly." He said after I tested it to then bring it back to be drilled and pinned. I was already a bit sketched out by this, but took him at his word. I was getting my range bag ready for tomorrow and screwing on a suppressor when I noticed that the barrel could rotate nearly 270 degrees in either direction with very little force. Now I really don't want to shoot this thing. Pretty sure that barrel will quickly unseat itself without the pin.

Is this as ridiculous as it feels? Why the hell wouldn't he just drill and pin the damn thing when he had it seated where it needs to be? Can I actually shoot it like this?


r/Vz61 • • 4d ago

How to fix?

Thumbnail
gallery
12 Upvotes

Stock won't fully lock open - even with significant force. I'm guessing the curve on the back of the receiver is out of spec, based on what I'm hearing about the recent Tortort batch.

What is the proper fix? I'd prefer not to modify the receiver, even if it's the cause of the issue. A) Appears there's a factory grind on the wire arms, where they contact the receiver - do I grind those more? B) Or is there a way to disassemble the stock mount so I can file the locking tab?

Because I know some will ask:
- Max Arms blued kit
- Tortort Gen 2 receiver (directly from Tortort)


r/Vz61 • • 4d ago

Anyone try this yet?

Thumbnail octoarms.com
9 Upvotes

It’s exactly what I want but holy shit is it high. The dude basically has the market cornered here as far as I can tell though.


r/Vz61 • • 5d ago

Gun Show

Thumbnail gallery
28 Upvotes

r/Vz61 • • 5d ago

Tortort was in stock

Post image
36 Upvotes

Doing my daily check since picking up a K-VAR kit looking for a Tortort receiver, Atlantic sold out while I asked my LGS about all their ‘your name has to be exactly as your gov’t ID states’ disclaimers (sorry I don’t put my full name on any website login info, first & last has always sufficed) …

Long story longer, Tortort website had them in stock and I ordered. Hopefully it wasn’t preordering for the upcoming drop and really was in stock. 8–10hrs later, sold out again. Congrats to any of the brethren who scored one today, Huzzah!

And K-VAR, the envelope was priceless. 🩶


r/Vz61 • • 6d ago

Welp this is a first

Post image
35 Upvotes

Thought we had a light primer strike, but after 2 or 3 bullets didn't load properly we checked the barrel and found the bullet for stuck in the barrel.


r/Vz61 • • 6d ago

Loose Front Sight Post

Post image
8 Upvotes

Happy Sunday everyone.

The front sight post on my painted upper spins relatively freely. My understanding is that earlier models have staked front sight posts, and later models have that red set screw on the left side of the receiver. I’m pretty sure this is just a case of me needing to tighten that set screw, but I wanted to check here first. Thanks in advance.


r/Vz61 • • 7d ago

I wish I had bought one years ago. Now I have two.

59 Upvotes

SSSzar V3 with a super safety. Milsurp parts kit from Max arms. Shooting old milsurp Sellier and Beloit 7.65 Browning. It's just the tits.


r/Vz61 • • 7d ago

trigger reset question....

4 Upvotes

My trigger will reset by bolt if i'm not holding the trigger rearward. Is this the normal reset for the platform or should it reset while being pulled back?


r/Vz61 • • 7d ago

VZ 61 stock (sbr) and RD

Thumbnail
gallery
16 Upvotes

Just testing out different RD/sights with A3 brace (9.5") and Kriss vector gen 3 stock.

Kriss vector folder work best with good eye sight and adjustable of pull.

A3 folder is a bit short for my taste.

Hope this helps with your build and stock selection.


r/Vz61 • • 8d ago

Atlantic Tortort receiver update

Post image
12 Upvotes

I'm new to VZ61s, but I believe this is a gen 2 Tortort receiver since the markings are on the bottom. Rate reducer pocket is not fully cut as I thought it would be. Still has the undersized rate reducer pin hole

Just an update for those wondering. This came from Atlantic. Serial number 633xx


r/Vz61 • • 8d ago

Bought a Kit, Need Receiver and FRT :)

Post image
13 Upvotes

Hello, I bought one of these from Arms of America. Was hoping someone would know best place to get a receiver and an frt that will fit. Thank y'all for your time 🙏


r/Vz61 • • 9d ago

vz61 modernization tchecklist before pulling the trigger

6 Upvotes

Greetings from Switzerland,

I've been toying with the idea of getting a surplus Klobb (converted full auto) and lightly modernize it.

I´d get an Askalon adapter to mount a micro dot and I'd attach a suppressor for good measure.

While I own a trilug 9mm and a 308 compact HUB can, I lean on buying an original TOS collet suppressor not to thread the barrel and keep the original look as much as possible.

My questions are:

- is the askalon adapter compatible with this suppressor ?

- what can I do to make the stock close when the suppressor is on ? I only know this part, but I will never get it shipped overseas.

To repeat, I´d avoid using space chassis (B&T Switzerland makes one) or modern looking stocks to complete my project.

Many thanks.


r/Vz61 • • 9d ago

Warm Regards to all

Post image
71 Upvotes

i share with you all one of my favorites from my safe


r/Vz61 • • 11d ago

Price Check - Blued kit, no barrel

2 Upvotes

Purchased from Appalachian arms a while back. Trigger guard intact, all parts look very nice. 1960s kit.

Just wondering what prices are looking like since the market is pretty different from when I bought it. Think I paid 230 for it with accessories. Wondering on the price without accessories. I'd like to list it fairly when I sell it. (NOT HERE)


r/Vz61 • • 11d ago

Vz61 lower

2 Upvotes

Getting ready to pull the trigger on a parts kit and would like to know where I could buy a lower that works well with frt or instead of buying to know what is a good printable lower that does well with frt setup.

Thanks in advance