6 weeks with Aputure - Images from set at bottom!
Truck package:
Nanlux Evoke 1.2k w/fresnel
2x 600d
2x 300d
2x 300x w/26-degree leko spotlight
4x 60x
B7C kit
300c NOVA
P60c Small Panel kit
1x MC small LED
1x Quasar bi-color tube
1x MT Pro
4x Digital Sputnik Voyager 2-foot tubes
4x4 Kino
Single 4-foot kinos
4x Kino Barfly
30 stingers
Various practical bulbs, hand dimmers, from 300w to 15w frosted and clear, and some specialty practicals with interesting filament designs.
3000w generator
Custom built 200Ah, 1200w battery inverter/solar charger
Mini CLRS Reflector kit
iPad Pro w/Sidus link, Nanlink, DS app, Blackout DMX Console
Fresnels, Softboxes, parabolic softboxes, lanterns, and multiple accessories for every lamp, the complete line of Aputure and SmallRig bowens mount modifiers.
Camera: 2x Sony FX9, Cooke i8/Panchro/Ironglass/select Canon FD’s – 800/4000iso, with a stop of T4 for most scenes. Fisher 10 w/40ft straight/half circle track, Stedicam, standard/baby sticks, 4-foot slider, dana dolly. Flanders 24”, 2x SmallHD 13” focus monitors, 2x SmallHD 7” camera monitors – you’ll have to ask camera about the rest of the accessories – I don’t know.
2x trucks
100% on location shooting.
Lighting an independent episodic mini-series can be challenging in any situation. The low budget nature of this show necessitated on-the-fly problem solving, utilizing all the tools available, and creating plenty of one-off lighting units. The only difference between this show and a high-budget feature, was the lack of big power and big lamps. With two electrics and two grips total, we used plenty of mirror boards and bounces, often splitting a single lamp into two or three different areas.
During our daytime scenes, we used every mirror, shiny, and bounce board available to send in as much light as possible. We supplemented with LED units as needed for fill, which kept me on my toes as the sun moved, color shifted into night, and I had to dial the LED’s color to match. This was done mostly by eye, as the “match” system utilized the camera on the iPad which only gave a reading of the wall color. Production could not afford to rent my color meter, so it was not used.
The night work proved challenging, and we were forced to limit our frames to cut out as much background as possible. We did not have the facilities to light the deep background on exterior shots. The 1200w Nanlux Evoke is a wonderful lamp, and provided much needed power to hit tree lines on farms, and match the sun to create sunsets or sunrises on interior locations. More about the drawbacks of the Evoke later. During location night shooting interiors, 300d and 600d’s were deployed to bounce into porch roofs, or glow windows. Bounced moonlight was also used, with either 300d’s or 600d’s being bounced into a frame just above a window.
The 600d with F10 fresnel is excellent. We were able to match the output of the 300c Nova panel with a gel cocktail and some 250 diffusion. Excellent results. The 600d with the large lantern/jem ball attachment provides for exceptional soft moon look, provided it is placed far enough away. Alternately, it was also used to increase the ambient daylight level inside several locations.
The 300x with leko attachment provides good alternative, however a real Source 4 750w leko is a smaller package overall, with better user experience. Until the 300d spotlight attachment is smaller in physical size, trucks should carry normal tungsten leko’s, and utilize the appropriate tool for the physical location. On a stand, the aputure spotlight is wonderful. Rigging on a wall spreader in certain locations is problematic due to its overall length.
The aputure fixtures were used in 110 degree interior locations, and 30-degree exterior night locations in all weather conditions, including frost, rain, wind, and coffee fueled angry ACLT’s. Only two lamps failed in the six week shoot: one B7 bulb had a battery issue, but continued to function normally on hard power, and one P60C Amaran small panel was DOA.
Overall thoughts on the lamps:
60x – Quite useful due to size, and ability to rig. Having the ability to attach a v-mount battery to the side is nice, but we only carry gold mount – user experience may vary. The output is decent at 800iso in many areas. We used these for key lighting plenty of talent with these going direct with no diffusion. The tungsten side looks better than the daylight on skin. The locking IEC AC plug is understood, but a pain to deal with on a daily. The AC power cable can become stiff when cold. The barn doors are the weak point in this lamp. Open wide, in either accessory ear slot, they are unable to rotate more than about 20-degrees. The softbox is incredibly difficult to assemble, taking a minimum of two people. We did it once, and never took them apart for the rest of the show. They hold up to truck travel well, when being careful, but they are not amazing in their quality. Bluetooth connectivity works well, no issues seen. Final verdict: They are excellent lamps, and I would not hesitate to use them again, providing I can have more than 4.
300x - These are good with the fresnel, or good when bounced with the cone modifier. Direct with the cone causes multiple shadows from a single unit due to the COB not being a real single point source. Their output is good, and about the same as a 650w tungsten fresnel. They are quite useful with the spolight leko attachment, however the drawback is the physical size. With the spacelight modifier (which is sub-optimal in build quality), they can be very useful if room for rigging is available. They are quite useful to make hotspots on the background, different shapes, or used with the CRLS system to bounce light onto the set. Adding the SmallRig small dome softbox, with the internal baffle OR the full diffusion does make an excellent quality tungsten source. This heavily depends on makeup, much like traditional quarts lamps. In fact, the small parabolic SmallRig softbox, with the internal baffle and control grid is fantastic. I may even replace my collection of 2k zips with this fixture… someday.
600D – These work great as usual. The Aputure lanterns are good, the SmallRig versions are better, and the F10 fresnels are great. Daylight only means they are good for one thing, however they do that one thing well. I can easily add them to the list of LED’s that I actually would call for. We did use them as overhead daylight sources with the JemBall attachment which worked very well. The header cable needs to be male/female capable to be a true HMI replacement. There were plenty of times where I really needed TWO header cables, but instead had to find creative placement for the ballast. I have since been informed by Aputure that a 25-foot cable does exist, but it is not listed on the website.
300 Nova – After 5 weeks, I found these to be quite useful. They are equally as good as a Gemini or Vortex. Finding workarounds to the software engineering, and limitations of Sidus link were challenging, but in the end we learned a lot. With the more tested fixtures, such as the Skypanel or Vortex, advanced color modes exist which allow the user to saturate or desaturate color in GEL mode, or even modify the XY value slightly warmer/cooler. Working with Aputure engineers, those same controls can be had with a standard DMX console, but not inside the Sidus link app, and not inside GEL mode, only in XY mode. Crossfade to base lamp color is available in CCT or HSI mode. These limitations with the Sidus link proved very useful for future shows in which these products are deployed. Using the Nova for broad location lighting worked great. For Key light through several frames of diff they were very nice. Color is good, equally as good as a Skypanel, but perhaps not as critically correct at the color science in the Freestyle fixtures. The Aputure softbox is not amazing. Thin rods, only one single ¼ grid diffusion which is a plastic material, the control grid works well. Light quality is soft, but the whole softbox package needs additional love. Looking for other manufacturers for softbox inclusion in the future. We were not able to obtain a Nova 600 for testing.
Nanlux 1200 Evoke - The lamp itself is fine. Output is great, the ballast is nice. A lot of DP’s and Gaffers, including ASC members have decided this fixture is worth the trouble. The header cable is woefully short. I have been notified that a long cable can be ordered, but the cables are female? Male? Whatever on BOTH ends, which means two cables cannot be used together, just as Aputure has configured theirs.
The Nanlux Fresnel - Used with the 1200 Evoke, the light quality is fantastic. Easily as nice as a Joker 800, or an hmi fresnel without the electronic feel of hmi’s. Beautiful beam pattern, and quite easy to spot/flood. However, the fresnel is heavy as fuck. Seriously, it weighs 22lbs!!! and makes the lamp extremely front heavy. Its so heavy, the yoke bail has to be mounted directly to the fresnel housing, and the lamp just hangs on the back. Adding about 10 lbs to the back of the lamp helps balance a lot. If I wanted something that damn heavy, I would field a 9k. At $1000 its almost too expensive. The wheeled carrying case specifically designed for this Fresnel was $700 at the time of writing. Additionally, a newly designed Fresnel/yolk mount has been released by Nanlux, but I do not have further information at this time.
The final utterly stupid, dumb with two o’s thing about the lamp is the screen/display/controls. They are on the back of the lamp head. So tell me, when the lamp is on a mombo 178 feet in the air, how am I supposed to control it when I am 1000 feet away, and my lamp operator doesn’t have a device able to connect to the dedicated app? The only solution I could find is the app, which actually works great. But when I am not on set, or am more than 200 feet away from the lamp, then someone has to run over closer ANYWAY just to control it from the ground? How is that any worse than having a wired remote, or control on the ballast? And what the hell is the point of the control box for this thing anyway? Its a single color lamp! It does not need to do effects. I do not need “fireworks” on my single color daylight lamp. PUT THE CONTROL SOME WHERE ELSE! That said, I am pleased with the CMRX abilities, which solve all of these issues on a professional set.
Kinos – worked flawlessly ever time. Yes, the housings suck as usual. But I had no issues dragging them out of storage, dusting them off, and firing them up. The Barfly was especially useful for adding a wash of daylight when I needed an additional soft source.
Sidus link - The app works as intended, except when it doesn’t. Easy to control a single lamp, a group of fixtures, or all fixtures. The group function has some bugs. Sidus Link HD, iPad only PAID app ($10/yr). This new version fixed most of the problems, except it has some serious drawbacks/issues. The “fixtures” section does not talk to the “console” option. Setting anything in the console is overridden by going back to the “fixtures” menu. This is dumb. Setting anything in the fixtures menu sends data to the lamp, but does not show on the console menu. Re-ordering the fixtures list is only achievable by re-ordering the console sliders. That’s dumb. Took us days to figure that out. The console master fader sets all lamps to the master fader percentage. If a group is selected, with multiple different dim percentages, all lamps in that group will be reset to the current master fader setting, instead of being faded up down to the individual channel setting. This bug has been reported by multiple people, fix hopefully soon.
We tried REAL hard to use this app for 5-weeks, and in the end, found that for most simple setups, it’s great. For very complex or color critical work, it is not good enough. Blackout to the rescue.
P60c small color panels – These are, according to Aputure “not intended for the demands of professional sets”. I agree. That softbox is a joke. Good for a simple color wash. Will not go into further detail. Youtube creators, content creators, fast mobile filmmakers, this lamp is for you. With three pieces of gel and a bunch of duve I was able to make a suitable fire effect inside an oil drum, along side a fog machine. That actually worked well.
B7c bulbs: When they work, they work great. Same color science as the Nova. When they don’t work, we could never figure out WHY they didn’t work. Fully charge, turn on 10%, lamp cuts out, battery dead. Turn on, lamp at 30% works for 189 hours on battery. Turn on, battery dead. 100% of the time, they work on hard power. IF you need color, they work well. If you don’t need color, 1000% of the time I went to get a regular 100w bulb and hand squeeze from the truck. It takes the same amount of time to swap out the damnd B7 three times, as it does to run a hard line to that practical. I was informed the kit was brand new. We always had problems, nothing worked as expected.
Digital Sputnik Voyager 2-foot tubes: After contacting DS about issues, everything was finally resolved by watching a 4 hour video in which the creator guides users on how to setup the tubes – none of this information is in the user manual. After that, these tubes worked great!
Aputure MT Pro – This tube showed up on the final day, and I only was able to test it out. Worked great as an eye light, was easily able to match the color of the other fixtures. CRMX built in is awesome.
What we liked/learned: deep dive into the color science and programming of the Nova. Can definitely recommend. It does not have the 20-degree beam angle of Creamsource fixtures, but they are an excellent skypanel replacement. The new Nova 600 should be even better. 60x I actually grew to enjoy very much. Very useful, and at this point would not hesitate to deploy over a small tungsten fixture. However, they do have a limit to the power output. At more than double the price, the Fiilex competitor is only 30w more output, RGB, but potentially not actually more useful. The 60d/x line are cheap enough to field two if extra output is needed. There is a projector/spot attachment for the 60 line, and while I have not tested it, seems to be an alternate to Dedo style fixtures. Scrims are needed.
What we disliked: Cases. Cases were the worst part. We tried to keep everything in its case. Do not recommend. The lamps are just as robust as their tungsten brothers, but the cables are much more delicate. On the next show, I am going to attempt to keep the lamps on a cart, just like every other lamp, without all the cases. 300/600dx direct with cone – multiple shadows from a single source is sub-optimal. Multiple shadows from a 9-light is basically the same thing, but the sources are manageable, and the individual bulbs can be manipulated to make a much more useful fixture. Sometimes a hard, single point source is needed, and a COB doesn’t do that.
We HATE that Nanlux fresnel – its far too heavy. Used it twice, left it on the truck for the rest. We dislike that none of these lamps come with a scrim set. There were several instances where scrims were needed, but we had to utilize nets because we had no scrims. Once again, LEDs do not solve all problems. I will have to carry scrims on the next show.
Final personal thoughts: Aputure has come into an interesting place. Being active in the professional market, and actually taking advice from that sector speaks volumes. Nanlite/Nanlux is already doing things in the professional market, and I would not be surprised if they surpass Aputure because of the connection to the Youtube content creator field. Aputure is absolutely viable for any size of production. The 1200d has a verified, peer-reviewed output equaling an Arri M18. There are some products which Aputure needs to release to keep in the game. Quasar is basically dead, I never see them anymore. I wish I had access to more Digital Sputnik. With the Kino/Chauvet merger, their new tubes look quite interesting, but who will come out on top? At this point, my recommendation would be to use the tools that have the features you NEED, and not the tools that everyone else is using because everyone else is using them. Titan tubes are not great, they are just what we are used to. With a soft box on, the Vortex 8, Nova 300, and Gemini RGB 1x1 have exactly the same output. If you need waterproof, get the Vortex, if you need whatever Gemini can provide, go that route. Don’t forget about the Fiilex Quad Color! But do not choose a brand because so many others are – take a serious look at your tools! Choose wisely.
Basically, if Aputure is good enough for His Magesty King Charles III, its probably ok for me.
https://imgur.com/a/24h0ORI
u/Aputurelighting - Ask them some questions, they are good people!