r/Thrustmaster • • Sep 09 '25

Thrustmaster Sim Rig!

Post image

After two days of building and putting everything on the Sim Lab P1x pro it's done!

87 Upvotes

27 comments sorted by

5

u/[deleted] Sep 09 '25

Wild setup! You have a little bit of everything. I bought a T598 recently and I absolutely love it. I'm already deciding on if I want the TSS handbrake or Ferrari 488 GT3 as the next addition to my sim rig.

5

u/wessel0204_ Sep 09 '25

Ferrari 488 gt3 is a fantastic wheel! I love it

1

u/MIR_Sim_Racing Sep 09 '25

Between 488, SF1000 and hypercar, which would you pick?

Edit-: already have the alcantara 599x so dont need a round wheel

2

u/wessel0204_ Sep 09 '25

488. I use it the most. Especially with gt3 it's a must have

Sf1000 is also nice. The screen is cool and all but during races you dont really use it.

The hypercar wheel has the best premium feel. But it depends with what you are driving tbh for the use of it.

But if i had to pick i would go with the 448.

1

u/MIR_Sim_Racing Sep 10 '25

Thanks, i was thinking the 488 as well but wasnt sure if its grip is good or not.

The normal wheel the T598 comes with has horrible grip so i use it for guests (who dont wash their hands before using my alcantara wheel). I hope it is not similar to that wheel. It has 0 give

1

u/Zabroccoli Sep 13 '25

More than the open wheel add on? That’s what’s I’m racing and I love it. Though, I came late to the party so I don’t have the BT addon.

2

u/No-Community932 Sep 09 '25

What cockpit is that. Nice setup

2

u/wessel0204_ Sep 09 '25

Sim Lab p1x Pro.

1

u/xracer000 Sep 09 '25

How do you like the TH8S versus the TH8A shifters? I have the "A" and the TSS handbrake. But I hate having to change modes on either of them. Just curious because if I see a used TH8S for cheap online, curious if it is worth it?

2

u/wessel0204_ Sep 09 '25

Th8s does the job. It does not have the same metal feel offcourse but like i said it does the job.

1

u/xracer000 Sep 10 '25

Honestly, as much as I would like to have a dedicated h-shifter, sequential shifter and handbrake, I am not sure I could add another shelf to my GT Omega Classic wheel stand. It comes with 2, but I have a total of 5 attached (2 are connected together for a keyboard shelf, and I somehow figured out how to connect 3 in a waterfall format for my handbrake on the top, shifter in the middle and a tiny mouse tray on the bottom level. (They connect from the main top mounting location all the way to the shifter post at the seat, so it cannot fold.)

2

u/IcyFever Sep 14 '25

I found a couple videos with tips that made switching modes faster in case you haven't seen them. Highly recommend both cheap "upgrades".

I replaced the screws on the top plate of my TH8A with thumbscrews, now it only takes a few seconds to change from seq to h-pattern. Here is a video https://www.youtube.com/watch?v=5FOd2W8bpCA

Also here is another similar mod for the TSS handbrake https://www.youtube.com/watch?v=3V2K4RraoL0

2

u/xracer000 Sep 14 '25

Damn, never thought about thumbscrews. Although, I have been looking for either a broken TH8A for cheap, or a replacement for the with plug connected to the h-shifter/sequential pin button on the inside. Because I was going to install a switch and remove that button, so I wouldn't even have to remove plates and just use the slot in the h-shifter. I just cannot find the exact switch, and I don't feel like cutting and splicing the wires on a perfectly working product!

1

u/HCLB_ Sep 10 '25

Wow how do you like it?

1

u/_DarkKnight___ Sep 10 '25

Hey how's the th8s holding up? I am planning to buy one myself. Does it feel too plastic & toy like or is it manageable?

1

u/wessel0204_ Sep 10 '25

While in use you don't really notice. In my opinion it does the job.

1

u/Practical_Library793 Sep 17 '25

whats that small screen on the tm open wheel it looks so clean...

1

u/wessel0204_ Sep 17 '25

Thrustmaster bt led display

1

u/ExiledNoxas Sep 09 '25

Great way to spend 10-15k too bad ill never afford it. Looks awesome af tho.

2

u/TimBoss351 Sep 09 '25

P1-X Pro is 850-950, everything else is at most 2k. With seat let’s say $3,000-$3,500. 10k you have Simucube/Asetek, 4k triples and a 5090. 15k you have motion.

2

u/wessel0204_ Sep 09 '25

Yeah it's around 2k i think. I buy as much as possible second hand.

2

u/TimBoss351 Sep 09 '25

And as someone who has had Thrustmaster, Fanatec, Simagic, Asetek, and still has a Playseat with a T300 setup for the PS3 and GT5/6, the ‘better stuff’ is cool and all, but it’s really diminishing returns for the money invested. What you have now is a great setup to roll with for a loooong time. I started on anG27 clamped to an end table and GT3 A-Spec. Have different stuff now but I’ve always has a ball with everything I had. The guy saying he wishes he could have the setup and guessed 10-15k, he can have a ball with a Marketplace used setup that’s $500.

Wheel is more fun than controller. Period (IMO). Thanks for showing people how insane of a setup you can build for 2k. You made something jaw dropping for many people and it’s more attainable than they think. One step at a time. They can get a rig and sit in it and use a controller. I had a T300 on my first SimLab. And loved it.

1

u/TimBoss351 Sep 09 '25

I have two P1-X Pros I bought new at Microcenter but on sale, night the DD+ setup new but then started getting used stuff for the PC rig. Saved a ton of money for quality stuff. FB Marketplace where you can see how long someone’s been on FB and meet them in person only; I do t have faith to buy over the internet unless it’s from the original manufacturer or certified sales places like SimShop

2

u/RailWoods Sep 09 '25

I have a modest setup for my first year in, I have a feeling it's going to turn into some monstrous contraption I have to keep in the basement and your setup looks like a stepping stone on the way there.. I put fans on my t598 too, I hated worrying about the heat even though a lot of people said it's OK.

1

u/ATIBoy69 Sim Racing Sep 09 '25

Nice setup...

1

u/bleda1988 Sep 09 '25

I want the handbrake