r/ThermalPerformance • u/salumi • Sep 29 '16
r/ThermalPerformance • u/Aerothermal • Oct 30 '18
List of thermodynamics educational videos
reddit.comr/ThermalPerformance • u/aklmie • Jul 18 '18
Heat sink under an aluminum laptop to cool it down ?
Hi,
Regarding the thermal issues of laptops, I was thinking about the most effective solution to try to cool them down.
All market coolpads are mainly simple plastic grids with fans. I seriously doubt it could be effective and think it’s much more pure marketing products.
I was wondering finally if using a large heat aluminum or copper heat sink plate as a laptop stand would perform much better especially with laptop which have aluminum enclosures like MacBooks?
According to you which solution would perform better ?
Some users did benchmarks with laptops in a fridge but not a really usable solution :)
I was thinking first about trying to build a kind of Peltier coolpad but finally thought about the metal heat sink.
Not sure if this is the adequate sub to ask this but I think I could have real expert answers here rather than on Apple or MacBooks subs.
Thanks for your lights
r/ThermalPerformance • u/[deleted] • Feb 07 '15
Thought this may belong here [X-post /r/space]. Pretty cool.
r/ThermalPerformance • u/[deleted] • Aug 26 '15
/r/ThermalPerformance Has Reached The Milestone of 500 People Concerned With Efficiency!
Hope all of you have gained something by your participation and/or will in the coming months and years (talking to the recent burst of students with the semester starting!)
If any of you have idea aesthetic suggestions for the sub layout or technical suggestions for the sidebar or anything dealing with the sub, /u/HaggardAvatar and myself always accept PM's and will gladly consider feedback, so feel free.
Hope everyone is having a good last few weeks of summer. -TP Mod
r/ThermalPerformance • u/cassius_longinus • Jan 13 '15
A combined power cycle concept from the dustbin of history: mercury vapor (Rankine) + steam (Rankine). Achieved a heat rate of 9,800BTU/kWh.
r/ThermalPerformance • u/[deleted] • Jul 17 '16
The Race To Absolute Zero [Documentary]. Pretty neat.
r/ThermalPerformance • u/Pizzacrusher • Aug 29 '18
How does a "Hogger" in a steam turbine condenser work?
how does it know how to eject entrained air vs steam? how does it know the difference? is it like a mini condenser that is vented to atmosphere?
r/ThermalPerformance • u/rafikguiga • May 03 '16
Why isn't specific heat at constant volume Cv=∆U+V∂P/dT instead of Cv=∆U/dT?
I know that for constant volume ∂q=du and so du=Cv.dT However i dont understand how did we get to ∂q=du by neglecting the vdP term of enthalpy What im trying to say is, is enthalpy this ∆U+P∂V+V∂P or this ∆U+P∂V? I dont understand since the definition of enthalpy is derived out of a constant pressure volume change And why snt specific heat at constant volume Cv=∆U+V∂P/dT instead of Cv=∆U/dT?
Thank you in advance for your answers
From what I see: ∂Qnet,in=∆U+∂Wnet,out ∂Qnet,in=∆U+P∂V+V∂P
C=∂Qnet,in/dT
For constant pressure: Cp=∆U+P∂V/dT assuming ∆U+P∂V is enthalpy then ∆H=Cp.∆P
For constant volume: Cv=∆U+V∂P/dT but all the books say it actually is just ∆U/dT where did the VdP term go? if we add heat to a fixed volume won't its pressure increase and so VdP would be relevant?
r/ThermalPerformance • u/[deleted] • May 30 '15
Just got my new Smartphone Thermal Camera. -30F<Range<640F. Useful at work but awesome at home. I present Captain Jack Harkness.
r/ThermalPerformance • u/avant_gardener • Aug 21 '19
Boiler engineers in/around Seattle?
This is NOT a job seeking post.
I'm a UK-based industrial gas boiler engineer and I mainly work on burners and boilers up to about 6MW per boiler. I also do some other things like gas-fired warm air units and so on.
I'm looking for anyone who does the same sort of job in/around Seattle or WA in general (or even in wider USA really) to get some advice. As I said, I'm not looking for a job, just trying to scope out the potential market and requirements before I commit to doing something crazy.
r/ThermalPerformance • u/[deleted] • Aug 01 '18
Book Recommendation for Piping Design with both mechanical, thermal, and pressure loads?
I'm planning to learn about piping in extreme conditions which includes mechanical and thermal stresses, and also subject to conveying pressurized liquids. Can you kindly recommend me a book which tackles analytical design for such besides multi-physics simulation?
Thank you so much in advance!
r/ThermalPerformance • u/[deleted] • Jun 10 '18
MIT Fusion D-T Reaction. "ARC Reactor" Affordable Robust Compact - Grad Students Named... (lol) 100M Degrees to sustain reaction, and the magnetic insulator advancements mean it's becoming realistic. A great watch if you have an hour.
r/ThermalPerformance • u/[deleted] • Jul 18 '16
These old videos are priceless for a basis for initial understanding. 1946 Turbine Class. Timeless
r/ThermalPerformance • u/[deleted] • Feb 17 '16
Thermocouple calibration and checks question
To start with some background so my question may make more sense:
If I have a TC that's suspected of being off temperature of the system I will do what I assume is the standard troubleshooting techniques (verify it's bottom'ed in the well - check the connections and junction signals for any line faults - even check a test thermal well close by with a calibrated portable TC that we keep here. If we determine the TC is off calibration, what are the methods to have the TC calibrated without buying an entirely new one?
I've been told at work we can always go into the DCS and put in a curve to correct this issue but that takes quite a while and measurement from the thermal well at different load points (variable loading plant), so it's almost not worth the effort if a new TC can be purchased with relative ease.
I'm mechanical by background so forgive me if there's something I haven't considered but I assume the TC is just a different wires connected at the tip and the voltage difference given between them in the presence of heat, so is there really anything that can be done? Does it have to be an input curve or a new TC? Is there no other cost effective, time effective way of calibrating a TC?
r/ThermalPerformance • u/jeezuspieces • Nov 25 '15
Radiation and absorptivity
Forgive if radiation is not part of this sub.
So absorptivity is the fraction of irradiation that is absorbed in a medium. So the higher the value of absorptivity, the more your internal energy increases, assuming none of it is transmitted. An increase in internal every should correspond to a higher temperature, right?
r/ThermalPerformance • u/Ganondorf-Dragmire • Feb 26 '15
Why are enthalpy and entropy so useful?
So thermodynamics has always been my weak point in engineering. Can someone explain to me why enthalpy is more useful than internal energy?
Also, the concept of entropy is still confusing too me as well.
Any help?
r/ThermalPerformance • u/engineermanp • Jan 12 '19
What’s a good conductivity to run at in a boiler and why?
I have a small boiler we use for our process that makes low pressure steam.
What conductivity should I have it run at and why?
r/ThermalPerformance • u/Ajakskwj • Dec 07 '15
Theoretically, How can one improve the performance of a 30 year old condenser with (approx) 25000 titanium tubes (most have aged thoroughly)? We use 2 Vacuum pumps to maintain the condenser vacuum, also, the cooling in the condenser happens via an open cycle system. Any suggestions?
r/ThermalPerformance • u/DrummGunner • Aug 26 '15
Advice for 3rd year Energy Engineer UG?
Hello all, I feel at home here already, gotta thank /u/HaggardAvatar for pointing me to this sub from the engineering student sub. Just some background, I am going into my 3rd year in mechanical engineering (Energy Specialization) which in my Canadian school basically means I take the same courses as MechE students for the first 2.5 yrs and then go off more into thermal and energy courses in my final 1-1.5 yrs. Honestly, this is the only really reason I'm taking engineering, hated dynamics and solid mechanics but I survived them knowing that I'll love these coming years in my program.
I did well in my thermodynamics and fluid mechanics courses and I have the following Energy courses coming up this year (I'll include a short description of each of them)
Introduction to Energy Systems: Energy systems, resources and use; energy classifications and terminology; energy sources and currencies; energy supply and demand; energy conversion and utilization technologies; energy storage and distribution; energy use in countries and sectors of economies; energy intensity; global energy flows and utilization patterns; principal fuels; fuel science and technology: origins of fuels, classifications and physical and chemical properties of fuels, fuel handling and fire hazards, non-conventional fuels; sustainability, sustainable development and energy; clean energy systems. Environmental impact of energy systems such as power generation, industrial processes and transportation; air, soil and water pollution and their effects on the environment; generation mechanisms of chemical pollutants, photochemical pollutants and smog; Introduction to renewable energy resources (solar, wind, geothermal, biomass), photovoltaics, microturbines. Introduction to energy storage systems. Introduction to hydrogen and fuel cells. Introduction to life cycle assessment, industrial ecology, and key environmental tools. Application of energy and exergy analysis to energy systems.
Fluid Power Systems: The course reviews relevant fluid mechanics principles and proceeds with treatments of individual components. Components analyzed include: pumps, actuators, lines, valves and other related components. Discussions of individual components include: principles of operation, mathematical models, and design considerations. Analysis and design of fluid power systems used in industrial and processing equipment. Selected topics to include: positive displacement components, control devices, actuators, fluid transmission and system dynamics.
Heat Transfer: I think this is pretty universal so I will not post a description.
Applied Thermal & Fluids Engineering: This course incorporates the fundamental principles of thermodynamics and fluid mechanics to engineering applications. Topics covered include refrigeration; heating, ventilating and air conditioning; heat engine cycles, including the Rankine cycle; combustion; pipe networks; flow transients, including water hammer; open channel and free surface flows; flow machines including pumps, turbines and propellers.
I would love to get some advise on how I should approach these courses from the get go. Any helpful resources, which books should I buy and/or keep for the future I am guessing theses are some of the courses I would have to show I fully understand in interviews and on the field since I hope I end up working in the energy sector. What skills/fundamental should I make sure I grasp for the future while trying to earn a good grade?.
I'm pretty sure there are other questions that I did not think to ask. Please do not hesitate to throw them in here.
Thank you.
r/ThermalPerformance • u/generouselectric • Jul 05 '15
PSA - Older, publicly available EPRI research results
The Electric Power Research Institute makes some of their older research results available to the public at no cost on a semi-regular basis. This includes s fair amount of performance related information. If there is something EPRI works on that you have an interest in but don't support that particular program it is sometimes worthwhile to check to see if they've released anything for free.
I've also noticed that EPRI seems to be superseding older results and removing the old files from their lists, so your mileage may vary.
r/ThermalPerformance • u/generouselectric • Jul 05 '15
What's Wrong With Thermal Performance Engineering? [PDF]
exergeticsystems.comr/ThermalPerformance • u/[deleted] • Mar 30 '15
Is determining the pressure drop of a steam extraction line the same method as determining the pressure drop of a pumped line?
I'm looking into the pressure drop of a steam extraction line at the plant and I'm trying to figure out a closer estimate of the pressure drop than we currently have. It's modeled now to use a "standard" 5% drop from a pressure transmitter that's located almost at the end of the line right before it dumps into the DA.
Can I use the velocity/friction method, and the K values (for bends, valves, etc..) to determine the pressure drop of the line, like one would do for a pumped line of solid liquid?
Thanks in advanced.
r/ThermalPerformance • u/Sexual_tomato • Dec 10 '14
Could someone point me to a good resource to learn about the design of heat exchangers?
I'm about to change jobs, and I'll be doing heat exchanger design. I want to hit the ground running, since I'm coming from an entirely different industry.
Where is a good place to start learning about this?