r/Taurus_TX22 • • 1d ago

Troubleshoot I fixed my TX22

15 Upvotes

I've been having issues with my TX22 since it came out of the box. I know plenty of people without a single issue and I think its a great gun. My TX22 would jam the same way everytime, nose up case bent in half/dented in the middle. Here are some of the things I tried,

Clean the mags

Put a mirror finish on every piece of metal visible in that gun

Lake line mag followers (bullet angle)

Use the magazine loader (bullet angle)

Bought a new mag

Thoroughly cleaned before every range trip

Tried holding the magazine in incase it was the mag release. (Bullet angle)

Tried at least 12 different types of ammo

Dump 1500 rounds through it to break it in.

I'm Sure theres more but I cant remember at this point. But what 3 of these had in common was they were trying to adjust the angle of the bullet. I looked at where the feed ramp meets the chamber and it squares off pretty steep, ramming the nose into the beginning of the chamber which in many cases causes it hang up and dent the middle. I recently had to rethroat an AR45 and I started seeing similarities between how the two guns were jamming. The fix was easy but will probably void the warranty.

The fix,

I took a round filer and rounded where the feed ramp meets the chamber, I wanted to make the transition from ramp to chamber smoother. I did it by hand and I didnt take much off at all. You can always take more off, you can't put more on. Second I put an old .22 bore mop in a drill and put flitz polish on it and went to town on the chamber till it shined.

Testing

I was shocked to get through that first mag, I thought it was a fluke. I took it to the range and dumped 200 suppressed rounds through it of only the finest/s remington gold tip hollow points, federal 40 grain lead, CCI mini mags, winchester hunt/target rounds and a bunch of random .22s i found at the bottom of my range bag. It ate everything flawlessly. I didnt have any nose up dented rounds.

Last small issue.

I did have 3 failures but I dont blame the gun. 1st was a dud round from the Winchester target/hunying loads, not the guns fault. The second was a magazine issue. I have 2, 22 round mags and I numbered them to keep track of which was which. Mag 1 has a lake line follower, mag 2 is stock. The 2 other jams I had were with mag 2 with nose down jams that pushed the nose deeper in the mag, never making it into the gun. When I was loading mag 2 by hand I could tell the stacking angle with the rims was off, like some of the bullets wanted to point down. The 2 times I noticed this and thought, this seems like it could be a problem, it became one! I found loading the bullets very flat into the mag fixed it. If I put the bullet in steep pushing down the next round with the rim, there was a good chance it would jam, it was easy to tell where the bullet wanted to go. I can see why people say use the loader.

The lake line follower didn't fix my problem originally and both magazines preformed the exact same way jamming within 10 rounds with the same style jam before my barrel fix. After my fix the lakeline follower worked flawlessly. Using mag 1 with the lakeline follower worked great no matter how I crammed random bullets into it. I tried to get it to jam and recreate the problem shooting as fast as I could and it was still perfect.

This was my experience, if anything I would try polishing the chamber with flitz using a bore mop first to see if that alone helps before doing any modification that will void your warranty. Hopefully this helps!


r/Taurus_TX22 • • 2d ago

Show-N-Tell My new TX22C finally came in today, can't wait to take it to the range tomorrow

Post image
15 Upvotes

Got the viridian bundle because it was $10 cheaper than the Toro compact without the dot. Thanks GunDeals!


r/Taurus_TX22 • • 2d ago

Show-N-Tell Joined the club!

Thumbnail
gallery
31 Upvotes

Needed a suppressor host. Found one. Happy man now.


r/Taurus_TX22 • • 3d ago

TX22 Support 22 didn’t discharge properly

Thumbnail
gallery
0 Upvotes

I couldn’t find a review on this model. Yes clearly it still discharged. Clearly I still had live rounds due to missing the yoke screw assembly. Im curious if I’m alone?


r/Taurus_TX22 • • 4d ago

Troubleshoot Manual safety issue

Post image
4 Upvotes

I've had this gen 1 for a while and have put thousands of rounds through it. Great gun.

I put one of the fast parts in last year for fun but took it out recently.

Now the safety seems to function but... its kind of a weird problem.

Before, the manual safety blocked the trigger from being pulled at all.

Now, after reinstalling the original disconnector, when I engage the manual safety, I can pull the trigger but its dead and doesn't engage anything.

The safety works. Even with a round in the chamber nothing happens, even when I smack it around... but its weird that I can actuate the trigger when I couldn't before.

Can anyone help me out here? Should I worry about this or can I leave it be?


r/Taurus_TX22 • • 4d ago

FRT For my tx22

Post image
25 Upvotes

r/Taurus_TX22 • • 5d ago

Troubleshoot What ammo do you give your tx22? Im getting tons of stovepipe jams with my normal range rifle

6 Upvotes

I wouldn't say tons. But I would say that i get a few every session but im using my gun ranges bulk 22 ammo.

Are you guys having better luck with better ammo?


r/Taurus_TX22 • • 5d ago

Troubleshoot At my wits end with this gun

Thumbnail
gallery
1 Upvotes

My tx22 has given me nothing but issues since the day I bought it. It has failure to feeds every mag, failure to extract, and tons of duds. I mean like 10% failure to fire rate level of duds. I can’t cycle through one mag without having issues and it makes me hate the gun. I had put roughly 200 rounds through it before it started keyholing and the end of the barrel was completely torn up. Got a new barrel under warranty and went to the range today and had all of the same issues I had when I first bought the gun. When I chamber a round often times the slide won’t fully close and I’ll have to manually push the slide forward. This happens when I manually chamber a round or when the gun re chambers after firing. Any advice would be greatly appreciated because I have seen these things run great online but have never experienced it myself. I have disassembled the mags and cleaned/ dry lubed them. I’m having issues with the stock mags and extended magazines. I load the magazines like it’s 9mm where I push the round in instead of using the follower.


r/Taurus_TX22 • • 5d ago

Show-N-Tell Obligatory purchase post

Thumbnail
gallery
30 Upvotes

Since my first post was deleted, I made adjustments to the post and thought I would try again.

Just picked up this Taurus TX22 Toro and a Dead Air Mask suppressor. I have plans for other faster upgrades but won't say to comply with group rules.

Anyone have success with a specific ammo for shooting real fast with a dead air mask? Ive been eyeing the CCI clean ammo but would like cheaper alternatives.

Had fun shooting for the first time, soft tink tink sound. Hit an old metal tub from 25 feet


r/Taurus_TX22 • • 5d ago

TX22 Support Anyone else's front sight just.....fall off? Kinda weird

Post image
15 Upvotes

r/Taurus_TX22 • • 6d ago

Accessories Taurus.com

2 Upvotes

Anybody order direct from taurus, I've ordered some mags from them over a week ago and still waiting to ship, is this normal for them?


r/Taurus_TX22 • • 6d ago

TX22 Support Chassis

2 Upvotes

Does anyone know of any chassis that work with the moonlight machine works rate reducer? I have a 3-D printer, so was trying to find one I could print, but willing to buy one online also


r/Taurus_TX22 • • 7d ago

Troubleshoot TX22 Failure (round stuck inside chamber)

Thumbnail
gallery
22 Upvotes

In the first 30 shots of my TX22c I had multiple jams and then on the last round it got stuck and didn't fire at all. It got hit by the Striker pin as you can see in the photo, but I'm not sure what's going on or if this is a factory defect. I'm shooting CCI minimag. Should I file for a warranty, i may have to take this to a gunsmith to remove the jam.


r/Taurus_TX22 • • 7d ago

Noobie Question If the barrel sticks out, does that mean it’s threaded?

Post image
5 Upvotes

description does not mention threaded barrel.


r/Taurus_TX22 • • 9d ago

TX22 Support Premium Taurus Customer Service

0 Upvotes

This was all via email:

Me:
Does the TX22 w/ Brace have a manual safety? The specs say it does, but the photo shows that the manual safety of the regular version would not be possible. If it doesn't have a manual safety, why not?

Taurus:
I am Kontriva with Taurus USA here to assist you. This model was designed not to have a manual safety. 

Me:
Your website is wrong then. Can I ask what the thought process was for not putting a safety on a slingable firearm? How does Taurus intend for this to be carried?

Taurus:
We are aware and we are working to update this information.

Me:
Why are you ignoring my questions? Is it not valuable to answer a paying customer's questions? At least to say that you can't answer them? You're behaving like a press secretary.

Taurus:
I would like to advise that this firearm has a striker block and trigger safety.

Me:
This exchange has been about as helpful as a rubber crutch. Thanks, I guess.

Taurus:
Thank you for contacting Taurus USA.


r/Taurus_TX22 • • 9d ago

General Chat Braced TX22 Review

8 Upvotes

Took 500 rounds to the Range to try out my new Braced TX22. Poof! 500 rounds gone and huge smiles across me and my sons faces. The words, “lazer beam,” were used often between laughs while reloading. That’s it, that’s whole review. 12 out of 5 stars, highly recommend. FYI No giggle button installed yet.


r/Taurus_TX22 • • 10d ago

Noobie Question looking to buy a tx22

0 Upvotes

new to the tx22 n its platform. and advice or recommendations for builds to make it a fun fun would be appreciated


r/Taurus_TX22 • • 11d ago

General Chat TX 22 now in 22WMR and 5.7x28mm ("TMX")

Thumbnail
youtube.com
52 Upvotes

New TXM, with interchangeable uppers.

More details: https://www.youtube.com/watch?v=n_3743F_q8g


r/Taurus_TX22 • • 11d ago

Show-N-Tell This is either gonna look awesome or really stupid…

Thumbnail
gallery
10 Upvotes

Going for a giraffe camo on my farrowtech chassis for my tx22. I forgot to order transfer tape from freedom stencils so I ordered some on Amazon, which was a bad idea… turns out the tape is way stickier than the stencil so it was impossible to transfer it to the chassis using it.

So I spent the last two and a half days meticulously placing them (my uggaa uggaa brain can only do this for so long in one sitting).

Started with a base coat of rustoleum earth brown. I then removed top pic rail and taped up bottom pic rail (can’t remove that one). Wanted to have the stencil on rail but it was gonna take so much effort, and I can always do it later.

Second coat after stencils is rustoleum flat khaki.

Gonna try to wait at least 2 days for it to cure, then hit it with rustoleum clear matte if it turns out good, and then possibly do same camo for tx22 if I don’t hate it. Will report back with results in a few days.


r/Taurus_TX22 • • 12d ago

Troubleshoot Emergency Replacement Takedown Spring (DIY)

Thumbnail
gallery
11 Upvotes

I was watching this video for firearm reassembly after a full tear down and shot my takedown spring into orbit.

This video showed that the PaperMate InkJoy Gel 0.7 has a perfect replacement. https://youtu.be/uYvkjHLC8B0?t=786&is=e4LCXoZdEwL9sf5J

Thankfully my wife is a stationary fanatic and has a stockpile of these pens and gave me a few (just in case I launched another). Lo and behold the spring fit perfectly and functioned as intended with good retention during testing.

I had seen replacement springs upwards of $25-$30 and thought that was ridiculous, so hopefully this will help someone else.


r/Taurus_TX22 • • 13d ago

Accessories What's a good budget red dot for the tx22

Post image
20 Upvotes

I'm trying not to spend a lot. I have holosuns and osights and they're nice. Just wondering if anyone has a known and verified gtg budget red dot that fits and runs nicely on the tx22.


r/Taurus_TX22 • • 13d ago

Accessories Chassis

Thumbnail
gallery
17 Upvotes

Looking for pros and cons of either chassis and quality, one from titan and the other from peak defense, thanks.


r/Taurus_TX22 • • 13d ago

Accessories AR Muzzle Devices Incompatible?

Post image
9 Upvotes

I had an extra Lantac Dragon 556 muzzle brake laying around and decided to thread it on my Calloway TX22. Took it out and, well, it refused to cycle. Rounds were essentially getting stuck in the chamber. Is this seriously the brakes fault? My only theory is that the weight of the brake is perhaps sagging the barrel and that’s somehow choking it up.


r/Taurus_TX22 • • 14d ago

TX22 Support Taurus notorious QC issues strike again with the 3TX22 crace model.

7 Upvotes

Purchased the 3TX22 braced version. Brought it home to discover a rattle. Turns out the front sight was so loose it rattled around. No problem, the red thread locker was on but the sight stud was loose. Tightened it up an moved on.

Tried to take the thread protector off. It require about 20 lbs of torque. I thought they might have used red thread locker. There was so much force needed for the crescent wrench, it damage the thread protector flats.

Took it to the range to find the suppressor would not fit. The 1/2 x28 barrel threads are out of spec.

Took it home to discover the extractor, plunger and extractor spring are missing.
It will need to be returned. Freaking hour drive to FedEx.


r/Taurus_TX22 • • 14d ago

Noobie Question First time Disassembly Question

4 Upvotes

Disassembling for the first time. Tandemkross upgrade time. What size punch are you guys using? I attempted to use an allen wrench to punch those pins out, but they are an absolute bear and hardly budged. Hoping the proper sized punch helps.