r/TalesFromAutoRepair • • Nov 28 '24

FireStone LIED about work being done!!!! Not going back ever!

1 Upvotes

r/TalesFromAutoRepair • • Aug 07 '23

Car Repair Question: Help! Genesis G80 4 Months in the shop and can’t find what’s causing the parasitic draw!

0 Upvotes

If you have any knowledge in this area, please take a minute to read. Any help is greatly appreciated!!!

My 2017 Genesis G80 has never given me any issues before this. In April, I attempted to crank it and it was completely dead. After replacing batteries and having my local auto shop look at it, they recommended to send it to a genesis dealership to run a diagnostics tests on it. 4 months and $3000 later, my car is STILL at this Hyundai dealership. It has been a complete nightmare, at this point I believe they are just blindly plugging in parts in hopes it will fix it. If you know anything in this area, and have an idea of what may be causing this, please share! I will do anything at this point. Any advice would be so appreciated.

Timeline at Dealership

  1. First day, diagnostic test came back “clean” with no draw found.

  2. Dealership replaced battery due to it not being an “authentic genesis battery” after I told them that a new battery was put in 1 week ago. 2 days later I went to pick up car and it was completely dead.

  3. More “tests” ran. 4.Trunk fuse box replaced. (They said it was faulty and drawing power but didn’t know exactly where)

  4. Car went dead 2 hours later.

  5. More “tests” ran

  6. Dealership requested to replace the Amp behind radio since draw went away when unplugged. (I denied due to it being $3300).

Note: When questioned about the fuse box they replaced, they advised that my “faulty” Amp fried the trunk fuse box which is why that needed to be replaced anyway.

8. They unplugged the Amp and advised that the draw has completely stopped, as long as I kept that unplugged. I was asked to pay and pickup the vehicle.

9. 2 hours later car was back dead again. 😡

10. Latest update today, they said that the draw is found to be coming from the inside dashboard fuse box and the box needs replacing along with the Amp.

They noted that the car is dying in about 1 hour and the car doesn’t go dead if the keys are left in the vehicle.

At this point, I am thinking of picking up the car and troubleshooting myself. I’m at a complete loss. Help!!! 😩 What do you think is the issue?


r/TalesFromAutoRepair • • Sep 10 '23

Need help with car cleaning mistake.

0 Upvotes

Hi, so my car was covered with saharan dust the other day cause for some reason it reach the North of the UK. I tried scrubbing yesterday and..... used dishsoap on some parts( I didn't know you can't use it on cars that's why) and now I'm left with these stroke marks. Any advice on how to get rid of these?


r/TalesFromAutoRepair • • Apr 19 '24

[AL] paycheck prob

0 Upvotes

Can your employer change your hours worked from 40 to 13 hours worked if you worked everyday and completed 40 hours on commission pay? My husband is 58 and he is having trouble keeping up with the other younger mechanics. He is working so hard and even trying to work 7 days a week just to make a descent paycheck.


r/TalesFromAutoRepair • • Mar 08 '25

Car quote after Accident

0 Upvotes

My high school daughter backed into a kid’s front bumper in school parking lot over 3 months ago. It was her fault, no doubt. It was pretty minor, took some paint off her bumper to his, again very minor. We spoke to the kid’s parent and just asked them to get a quote we didnt want to involve insurance. They agreed and that was it.

3 months fast forward and we get a quote wanting over $1500. Shocked to say the least as we figured they buffed out the scratches and touched up anything else like we did.

2 Questions?

  • Still wanna do whats right but is 3 months normal to wait on getting a quote for repair?

  • I plan on asking for a second quote, but should we just cave and pay the cheaper amount straight to body shop once done and move on?

TIA!


r/TalesFromAutoRepair • • Mar 15 '26

Mavis Sucks Yet Again

17 Upvotes

Set an appt for 11am sat in showroom with tires for 2.5 hours car did not move. Ask person at desk how long is it going to be, “well we only have 2 techs we are doing the best we can” .Well I set my appt for 11, insinuating that if you had only 2 techs you should not have had website set an appt for an oil change for 11 am if you only had 2 techs. Clearly a you problem not a me problem.

  1. employees not trained to handle inadequate scheduling practices

2)Mavis can give 2 shits about anyone’s time

3) You would think after the fiasco they had when the limo never had the breaks fixed by Mavis even tho they said they did an 18 PEOPLE WERE KILLED, they would have a little better business model.

Customer service is NOT their strong point.

Never ever even thinking about looking in the direction of a Mavis store let alone walk into one.

What dicks…


r/TalesFromAutoRepair • • Oct 03 '20

Anyone else “hey come here please!!!’” AKA the “gym class hero” AKA the “savior tech”

22 Upvotes

Anyone else get “save me” luber goobers to take wheels off or wheel balance correctly...and get drain plugs unstuck...filters unstuck...exhaust nuts....O2 sensors...alignment cams and do alignments the right way from back to front ...sway bar end links that keep “spinning”... just the daily wtf moments and stuck bolts in general..and sealing the cam caps when doing a valve cover...RTV in the corners...stupid kids doing a valve cover gasket...kids trying to take off wheels with the harbor freight gun with the long flip socket. I come over with my snappy mg725 and a short 19mm or 21/22mm..tighten that fucker one or two ugga duggas flip the switch to loosen her off and hammers hit twice and it spins right off...before I fill her with a cup of air oil though...I don’t oil daily


r/TalesFromAutoRepair • • Aug 14 '25

Compact Ever wished mechanics could just show you what’s wrong instead of explaining in jargon?

0 Upvotes

For General Car Owners (r/cars, r/Cartalk)

Every time I bring my car in, I feel like I’m playing “mechanic charades.”

They’ll say things like “your clearance is out of spec by 0.3mm” or “we tested the module and it’s failing intermittently”… and I just nod like I get it.

What if instead of just telling us, they could click a link on their phone and quickly jot down the steps they took, note the standard/reference values, and attach some photos or a quick video? T hat way we’d actually understand the issue and why a repair is needed.

Would that make you more comfortable approving a repair?


r/TalesFromAutoRepair • • Oct 09 '23

Anyone replace there Denali magnetic ride struts?

0 Upvotes

I bought some on eBay. China ones and 7 months later, about 3k miles on them one side of my truck is supper sagging. Anyone replace there oem struts with these? They had very good reviews. You can see the driver side is normal but passenger side big difference. 2016 Sierra 1500 Denali.


r/TalesFromAutoRepair • • Oct 25 '23

Fleet? Come check out r/talesfromgovernment!

3 Upvotes

I know we must have some crossover. 🙂 Any Fleet folks out there? Feel free to chime in over at r/talesfromgovernment.


r/TalesFromAutoRepair • • Jan 10 '24

Dealership Service experience

0 Upvotes

What’s the hardest part about taking your car into the dealership for any repair?


r/TalesFromAutoRepair • • Mar 13 '26

Catalytic Converter Modified and Smog Check Problems

0 Upvotes

I posted this on Yelp on DDR Auto Service
This is a long story.
Illegal stuff going on.

I dealt with Ernesto Sr. He is linked with Jesus the manager and Nick the receptionist/salesperson from Elite Tires and Auto Care in Long Beach. I had my car at Elite Tires on Monday around 2:30pm. I needed a catalytic converter in order to pass a smog check. I talked to Nick and gave him the keys. Nick called me 20 minutes after I left the lot. He asked, "Just wanted to know if it was okay if we turned into car to you tomorrow around this time?" This was close to 3pm. I said yes. I went back the next day around 3pm. Nick was not there, and my car was not on the lot. I talked to Alendra (I think that was her name). She told me that they started working on the car and that it would be ready in a couple of hours or the next day. I called the in a couple of hours. I called the place that I originally wanted to go and that is on the same lot as Elite. The owner said there is no such car. I told him what happened. He talked to Alendra. She told him that there was no such car. An hour later from that call I called the correct place and talked to Alendra. She knew who I was and told me she did not know about my car. Now I am thinking that my car is stolen. The next morning, I called my insurance and the cops. The cop put me on hold while they called Nick. The cop said that Nick has the car and taking it back to the shop.
Nick immediately called me back. He said that the car was back its way to the shop. When I got to the shop I asked for a receipt and the name of where they took. Nick said that they took it to a place called Neto Mufflers that is near the 605 and Rosecrans. I took my car to a place nearby to look at the catalytic converter. Neto Mufflers had chopped and modified the catalytic converter. The mechanic told me that it was illegally done and that it would not pass smog test. I went back to Elite and told them that I wanted my original back on. Nick drove my car and me back to Neto Muffler. While being at Net Muffler. My mind changed to keep the part, and they do the smog check. The smog check was to be done in South Gate. Ernesto said that the car had to stay for 3 days. This meant the car had to stay Wednesday to Friday. Ernesto did not need the paperwork. An old registration would be okay. I kept the car there, and then I called back a couple hours later. I checked to see it I can get my car back, and do the smog check on Monday. The interpreter said I can. When I got there, Ernesto said no. So, I had someone help me to get the smog check to done on Monday. That also meant the car had to stay Monday-Wednesday. Through the interperter, Ernesto told us that since we changed the date. They would have to change the calibration, something like that, on the smog check machine. I got my car back and will never do business at this auto shop and also Elite Tires and Auto Care.

I am writing this because no should go through this.


r/TalesFromAutoRepair • • Sep 11 '15

Help dealing with an Auto Shop? Bought a used motor and it broke 2 weeks after warranty expires.

21 Upvotes

My 05 Dodge Neon needed a new motor so I found a local shop and had them put in a used one with 80k miles (old one had 150K). They gave a 3 month warranty with the motor at $1,500 (note that the receipt said 30 days but they marked that out with pen and put 90) but on day 104 cylinder 3 started to misfire. I have brought it back to them and they checked connections and gave the green light. They check engine light went off only to come back on a half mile after I left, this has happened twice. I'm taking it back today but I don't have high hopes they will fix it, especially not for free. I think the motor they sold me was just a lemon. How should I go about this? Would suing help? or at least threatening to?

TL;DR Bought a used engine, broke right after warranty expired. Lawyer up?


r/TalesFromAutoRepair • • Mar 24 '20

Some people I swear to god have 0 brains whatsoever.

47 Upvotes

Ok so this lady walks into the shop and looks me right in the eye and asks if I sell tires? Now mind you I work at Just Tires... There’s a huge Goodyear sign behind me, a large just tires rug she’s standing on, and a tire savings promotion strapped to the back of my computer inches away from her fucking eyeballs. It took everything I had not to smile and say nope sure don’t. 🤯 here’s your sign


r/TalesFromAutoRepair • • Jun 11 '25

2013 VW Polo 1.2 TDI – Juddering During Engine Braking Despite Extensive Repairs

0 Upvotes

Hi everyone, I’m facing a persistent juddering issue with my 2013 Volkswagen Polo 1.2 TDI (Diesel, 3-cylinder, manual). The car judders noticeably during engine braking—especially in lower gears and low RPMs—when I lift off the accelerator. Interestingly, the judder subsides once I press and release the clutch. There are no warning lights, and the engine runs smoothly otherwise, with good mileage and no stalling or pulling issues. Over the past few weeks, I’ve replaced engine and gearbox mounts (including the dogbone), lower arms, brake pads, clutch components, driveshafts, and even the throttle position sensor. I’ve also swapped the gearbox and flywheel. Tyres are new and alignment is done. Yet, the issue persists.

So far, everything mechanical seems covered, but I’m now wondering if the timing kit (belt/chain or tensioner), ECU mapping under deceleration, or internal gearbox/chassis dynamics could be the culprit. The vibrations are only present during engine braking—no throttle input. I'd really appreciate any technical insights, particularly if anyone has experienced similar behavior. Any thoughts on hidden causes or next steps before deeper internal diagnosis would be a great help. Thanks in advance!


r/TalesFromAutoRepair • • Mar 30 '24

What are your top 3 biggest pains as a mechanic or a shop owner?

11 Upvotes

What are the things related to your shop that bothers the SH*T outta you?! Or things that gets in the way of your success? By all means, this is an opportunity to vent! But after reading these posts, I think that's the point of this sub. So other than people, what other things bother you and/or prevent success as a mechanic or shop owner?


r/TalesFromAutoRepair • • Jun 16 '18

Midsize The Canadian Tire I work for had to replace a customers engine because the screwed up an oil change

33 Upvotes

This would have been a lot of typing. So I have decided to make a quick video explaining what happened. Manager kept ordering the wrong engine https://youtu.be/hqy_k3UuFyQ


r/TalesFromAutoRepair • • Aug 20 '25

Monster Truck The Best April Fools Prank (legendary) NSFW

0 Upvotes

Hi, thanks for reading my story! I am a 28 year old man am/(was) an automotive technician at Walmart. (Yes I actually did this)

The day was April Fools Day, in April of 2025. This was the day I woke up and decided to wage war on social norms and make my coworkers squirm.

I wanted to really bend their minds.. so I decided we'd shake things up a bit. After finishing an oil change I walked off to the sales floor with a mission. A mission to leave my coworkers with lasting mental scars and laugh my ass off.

I head for the female clothing isle. Yup, you guessed it, i got some panties. I couldn't decide which ones, so I settled for hipsters. I had a great idea though.. I wanted to make my service writer check them out. The panties were funny, but I didn't feel like it really drove the joke home.. so I threw in some lotion and Kleenex in for confluence.

I bring these items up for Nathan and make him check them out.. all while making intense eye contact and never saying a word. He's squirming at this point. Keeps trying not to look at me and is clearly distressed.. I never broke eye contact. I never laughed (until later, 🤣), but I did hit him with the shhh 🤫 kill shot on my way back into the shop.

My joke didn't stop here, I'd only traumatized the service writer so far.

I took it to the next step. I put on the panties. I didn't tell a soul in the shop. I let them quietly assess what was happening. First coworker catches a glimpse of it while I'm balancing a tire, he points it out.

From there began the games. I have no sense of humility, no shame, and psychological warfare to commit. Pulled em up on the hips, tied my shirt behind my back, and gave the dudes no choice but to sit with the discomfort of seeing me, their degenerate coworker, in lacy hipsters for a day. I'd really play it up when guiding them into the bag.. when they had no choice but to look at me.

You might say the jokes on me, but I'm unfased. They, on the other hand, were forced to endure my game against their will. Forced to squirm and be uncomfortable. (and maybe have an erotic dream against their will involving me in panties)


r/TalesFromAutoRepair • • Jan 19 '25

Cost to replace timing chain cover 2006 Chevrolet 1500

0 Upvotes

r/TalesFromAutoRepair • • May 13 '23

Lexus Dealership Scanner Wheel Alignment.

17 Upvotes

I went to Lexus dealership for annual maintenance. Upon entering the garage I noticed 2 devices that I needed to pass through. Never seen them previously so paid no attention. During the talk with the service advisor I was informed that the car needed a wheel alignment and the charge was $250. I said that travels straight and no leaning to right nor lest. Advisor said it was just a recommendation. I declined.

Has anyone experienced the above?


r/TalesFromAutoRepair • • Jun 16 '20

How lucky do you think I am?

31 Upvotes

Customer here, not a mechanic!

I'm about to head to the shop and pay $3500 to replace my timing belt, water pump, serpentine belt, and power steering pump on my 2005 Hyundai Santa Fe with 186k miles on it. I went in just for the serpentine belt (it was making a noise when the engine was cold) only to find out that my timing belt was, I guess, coming off or moved (?) and had worn huge holes into both the upper and lower casing.

I knew the belt was old (185k miles old!) but I hadn't gotten around to replacing it after buying the care about 2 years ago, and no previous mechanic had mentioned holes in the casing!

Anyway, was I about to destroy my engine or myself based on the state of the timing belt? The mechanic was pretty shocked at the condition (I'll get a picture of the casing if I can when I pick it up later).

I guess I can feel lucky that I haven't been driving much during COVID, but I feel like I've barely escaped with my life!

I'm also a little curious if driving the car will or should feel different at all? I had noticed a sort of "weakness" as it it drove recently, but I don't know if that would be related. Transmission was rebuilt about 1.5 years ago.


r/TalesFromAutoRepair • • Jul 07 '23

Interior blower fan not working 2011 ford fiasta.

0 Upvotes

So a few days ago I noticed my interior fan was on although my car was off. It was on although the control was off. I already knew my resistor was bad because one of the speeds didn't work. So whenever it wouldn't turn off I switched it to that setting and it stayed off. Later that day I tried turning it on and it no longer worked at all. Replaced the resistor and didn't work. Checked fuses and relay. Bcm module? Control module? Need advice because this has me lost.


r/TalesFromAutoRepair • • Jan 09 '16

Man wants to know why his Water Pump failed

47 Upvotes

When I get home every evening after a hard days work, I enjoy watching TV, in particular science shows. A man asked me why his water pump failed, I had the perfect answer. The scientist on TV explained this and said that ball bearings made on earth are not perfectly round, they are actually egg shaped like the earth and prone to failure due to the wobble of the earth's rotation. If we could make ball bearings in space with zero gravity, they would last almost forever.

heehee, don't know if it's true or not but it sounds logical. Here's another one I've used before when customer wants to know why a part failed. A long time ago, parts were made by highly paid skilled union workers in the United States using American Steel. Today, they install low quality foreign made parts using recycled metals and they have no quality control or just don't care as long as they make money. About the only American product left now worth buying is Snap-on Tools! <followed by a crazy stare to see his reaction> This one works real good on foreigners who like to stand around in the shop.


r/TalesFromAutoRepair • • May 27 '16

Scammed By A $20 Oil Change

71 Upvotes

So, we're a startup in Toronto called Fiix (www.fiix.io), and what we do is connect people who want car repair services to fully licensed mechanics who will come to your home to service your car.

When we were first starting out, we were developing our website and trying to figure out the prices we should offer for our multitude of services. We were looking into how much a typical oil change costs and we came across this repair shop that was advertising a $20 oil change, which we though was absolutely ridiculous because it was so cheap. We were normally seeing oil change costs ranging between $60 - $100.

So we walk into the shop and speak to the mechanic at the front desk. He did indeed say that the true cost was $20, but it still boggled our mind. It was bugging us so much that we asked, how come they could offer $20 while all the other competition was offering at least 2x the price.

The mechanic then went on to tell us that they get told to upsell customers when they walk in asking for that service so that they can take advantage of them and make a larger profit. He said that if they were to do that job they would actually lose money, and that if the customer insisted to only getting the $20 job, they would sent them to Jiffy Lube! It was actually insane.

And even after that, he had the balls to try to upsell us! He started asking what kind of car we had, how many miles it had on it, etc, and started telling us that we needed a coolant flush, a brake replacement, and so many other services. AND HE DIDN'T EVEN LOOK AT OUR CAR. It was nuts. After he was done, he ended up giving us a quote for $300! SO WHAT STARTED OUT AS A $20 OIL CHANGE TURNED INTO A $300 BILL!

So now when we run our company, we make sure that we are fully transparent with our customers and mechanics, and that we offer cheaper, affordable prices that the customers will value. This experience constantly haunts us to this day.

We also filmed the whole thing, check it out: https://www.facebook.com/fiix.io/videos/983228978438769/