r/TTRAK • • Sep 13 '26

HO scale More modules! (And growing pains)

Post image
38 Upvotes

As a small club, this is probably as large as we can manage, at least until we adhere more closely to a common wiring standard & consistency among leveling methods. Set-up time could have been reduced quite a bit. We normally insert a single on each end, but because we had a triple in the mix yesterday, we needed one of those singles to make the doubles line up.


r/TTRAK • • 14d ago

N scale The light at the end of the tunnel isn’t a train…

Thumbnail
gallery
35 Upvotes

My Bad Day at Black Rock module is nearing the finish line. Need to build the roof over the hearse behind the mortuary and ballast the track.

The track doesn’t look right with all of the other stuff done…

Anne Francis is by her Jeep, Mr McCready is walking down the street by himself and the town is watching.


r/TTRAK • • Aug 31 '26

My first two day stay at a show!

Post image
26 Upvotes

This is the first time I have booked a hotel room and spent two days at a train show. I volunteered for both my local NMRA division and my local T-TRAK club -- in the picture.

Note: the modules in the picture are not mine -- they are N scale, my modules are HO scale -- I am not the guy in the picture.

Neither club needed me on Saturday, so I wandered around the tabes -- finding nothing to buy.

In truth, that was a bit boring -- but hanging out with the guys from the T-TRAK club was fun.

Sunday was a slow day at the NMRA table, so I basically hung out at the table and chatted with members. I a very new member of the club -- both clubs, actually -- so it was fun to get to know some more of the guys.

I realized just how obscure my modeling choices were on my Saturday of wandering. :-)

I am modeling modern DMU transit system in a relatively affluent city -- with enough density to -- at least hypothetically -- support a DMU.

That meant that I was looking at for two categories of merchandise at the show: modern DMUs; and 3 story or more stone or concrete buildings -- preferably shops on the bottom level and apartments above. As a kid, I aways thought that combination looked cool.

I didn't find any modern DMUs -- which didn't surprise me. From what I can tell, the US isn't really building any modern DMUs -- while some of the DMUs in service may be technically built in the US, I think that they are all European or Japanese designs.

I am not what to thing about buildings -- I may have to look more closely at the DMU Transit Systems and think about modeling more of a suburban for at least some of the modules -- where 1 and 2 story buildings would make more sense.

The other odd thing I would note is that I am now 2-0 on someone at a show finding out that I model HO T-TRAk, and saying, "We'd love to have some HO at the show next year! Can you bring your layout?"

It seems like it's not easy to get HO at smallish local shows -- N scale T-TRAK guys show up at the drop of a hat, and occasionally N-TRAK. And around here, there is a very active S gauge club, and they show up.

But not lot of HO -- I think that the only HO I have seen at a show has been S&SS NC modules -- and they like lot of room. For their own shows around here they rent out high gyms -- and filled every inch

I don't know if Free-Mo is not active around here -- or if they just prefer their own shows.

I think the local ETE club had HO module, and they will be at a show in November -- I am excited to see that. They not only model HO, but they require live catenary in their standard, I want to see how they manage that with module.

It may be that N scale T-TRAK sees to dominate in my area because it's easily the most transportable of the popular modular systems. I helped tear down, and I think it was under an hour from power to out the building.

N-scale T-TRAK also doesn't take up much room -- which may important to club renting vendor tables.

I hate to have to the guys who invite me to bring my layout to a show "next year" that I am probably 2 years away from having show ready modules -- I don't mean show winning modules :-) -- I just mean modules that aren't mostly a bare or barely painted plywood

But it's nice think that when my modules are ready, they will be welcome at shows -- at least shows in desperate need of HO. :-)

I am going to my NMRA regional show in Virginia Beach in October -- I am very interested in seeing what scales show up there.

I would be interested to know how unique my area is.

I your area, is N scale T-TRAK the most likely to show up smallish ( < 2000 attendees for a Saturday-Sunday) non-scale specific show?

N-TRAK?

Free-Mo?


r/TTRAK • • Jul 22 '26

N scale Finally finished

Post image
26 Upvotes

Today I finished laying the track, weathering the bridge, and and planting trees. Im pretty happy how it turned out. Once everything is fully cured i will hook it up and run some trains on it.


r/TTRAK • • 22d ago

N scale I made a Transformers-themed T-Trak module

Post image
23 Upvotes

r/TTRAK • • Jul 19 '26

N scale Made some solid progress on my module today.

Post image
23 Upvotes

Got the scenery mostly put together, once it dries i will pour the water and then i can permanently install the bridge and ballast the track. Its a little weird because the water feature means i am doing everything backward.


r/TTRAK • • Oct 09 '26

I am surprised how much difference a coat of paint makes!

Post image
22 Upvotes

I realized this week just how far away I am from building the structures, etc., that I have in mind for my urban DMU transit layout.

I decided to take an afternoon off of working on more technical issues — wiring, electronics, etc. — and paint the modules.

It felt a bit silly — and there won’t even be very much grass on my layout, it will mostly sidewalks, roads, buildings, etc.

But I was sick of looking at plywood. :-)

It turns out that painting the layout — even a simple grey on ROW, lime green everywhere else scheme — had a bigger visual impact than I would have guessed.

Sometimes it is very nice to find out that I am wrong.


r/TTRAK • • Jul 24 '26

N scale New module finally on the layout

Thumbnail
gallery
21 Upvotes

Making progress slowly but surely. Might do another corner next.


r/TTRAK • • Sep 27 '26

For doubters like me — G scale T-TRAK

Post image
19 Upvotes

Vic McTee posted this picture on Facebook from his T-TRAK clinic at Chattanooga this year.

Occasionally I have second thoughts about going with HO over N scale. :-)


r/TTRAK • • Sep 18 '26

N scale The Charleston, SC Coal Tipple Saga - Part 212

Thumbnail
gallery
19 Upvotes

The Coal Tipple T-Trak double module is finished!!! I want to thank everyone who answered questions and offered suggestions. There are a couple areas I wish were better; I’m happy with my first one and maybe I should have done a few simple ones before jumping in with both feet.

I cannot wait to attach this to other T-Trak modules and see this in action and become a real member of the T-Trak community…

Stay tune for the next adventure!!!


r/TTRAK • • Jul 25 '26

HO scale Grown men playing with trains

19 Upvotes

Our local club got together this afternoon to mainly see if our modules would work together and run a train or two.
I also have made up some 12ga powerpole bus lines, but this entire loop ran just fine with one set of Kato feeders.


r/TTRAK • • Mar 01 '26

Working on the wooded module

Post image
18 Upvotes

Started on the wooded module today. Placing all the trees to find their position, then removing them to do the ground and undergrowth.


r/TTRAK • • Aug 17 '26

N scale T-TRAK at the Railroad Museum of PA

Post image
17 Upvotes

Set ups in railroad museums are the best.


r/TTRAK • • Mar 15 '26

Module Boxes (N scale)

Thumbnail
gallery
17 Upvotes

Built some module carry boxes today. These boxes accommodate my 18 inch by double width modules. My design is such that it can be adjusted to various widths or lengths (longer for a triple). It also features locating dogs on the tops so that boxes can be securely stacked and not slide around. We used 1x4's and 3/16" cabinet plywood.

Happy to answer any questions!


r/TTRAK • • Feb 21 '26

Switching layout

Post image
17 Upvotes

Im building a triple module that i can use as a switching layout by itself and a normal module when its connected to others. Anyone have suggestions on making better use of the space?


r/TTRAK • • Sep 21 '26

The Kato Flextrack worked !

Thumbnail gallery
16 Upvotes

r/TTRAK • • Aug 29 '26

N scale The Charleston Coal Tipple Module Construction Begins

Thumbnail
gallery
16 Upvotes

I started placing the major pieces on my module. I see I am going to have to rethink some stuff (probably should have built the coal tipple trestle and ops building in Z scale…

I definitely need to decrease the length and width of the trestle…

I even measured twice and confirmed my measurements…


r/TTRAK • • Aug 17 '26

N scale A V&O Wreck Train is on the Way.

Post image
16 Upvotes

That double track concrete tie stuff has taken a beating on this module but it still works. Who knows, maybe it actually is bulletproof.


r/TTRAK • • Aug 03 '26

Power wiring (power bus, pigtails, module feeds) "finalized" -- finally running trains again!

16 Upvotes

I finally "finalized" the power wiring on my HO scale T-TRAK oval w/crossovers -- got the module feeds all heat shrunk (?) correctly, PowerPole connectors all correctly seating in the housings correctly, etc.

The red track module feeds have red heat shrink tubing, the yellow track module feeds have yellow heat shrink tubing. The power buses and pigtails all have black heat shrink tubing.

I also found that I have quite a talent for finding a PowerPole "false click" -- where the connector feels like it's seated properly but it's not. Then when you connect them, the connector backs out of the housing and makes a poor connection.

Since all of my modules are wired, I connected all of the wiring without connecting the track and used a track tester to verify that all of the wiring was correct. That is how I discover my false clicking skill.

Finally tonight, I am running trains again.

The layout is HO, the oval is 56" x 95". I am working on two more singles that will bring it to 56" x 114".

The folding tables are 60" x 126", so if I add more modules, I will need to build a bigger garage. 😄 .


r/TTRAK • • May 18 '26

Reflecting about T-TRAK after 4 months or so building modules.

16 Upvotes

I am at the beach -- and my modules are at home -- I can't work on my layout -- but I have been thinking about my 1st experience with T-TRAK -- minimal as that experience is.

Just to be very clear about just how minimal -- I built 4 (HO scale) corner models and have been running my Piko NCTD Sprinter around the circle with my TCS CS-105 Command Station and a UWT-100 Throttle.

Two main thoughts:

  1. Because I can build a layout -- the beginning of a layout -- using T-TRAK modules, I can have a layout. I do not have enough permanent space for a layout -- I look with envy on people who have a spare room. I have a house that I like quite a lot -- but it is a 3 bedroom 2.5 bath house in the the South. That means no basement and no attic for you non-southerners.

I have a two car garage, but it's also a workshop with a table saw and chop saw on a stand and drill press and myriad strollers and toys for when the grandkids come to visit -- and bike and tools for bikes for myself and my wife.

We are empty nesters -- but our children live out of town -- which man 3-4 times a year, every bedroom is occupied -- if not bursting at the seams.

That means no space for a permanent layout -- but I can set up an 8' x 5' layout -- maybe up tp a 10' x 5' layout on folding tables in garage, as long as I can take it down if a project that requires the table saw comes up.

I can set it up -- barely -- in the living room so long as I take it down when my wife want to host a bridal shower or a baby shower.

It is very nice to have even a nascent layout -- I had not thought that possible!

2) Because some people had condense there experience into Standard and Recommended Practices -- mostly those listed in this subreddit's wiki -- I pushed the 4 modules together, set the Sprinter on the track -- and everything just ran.

I am fudging a bit -- one the first circuit, I discovered that one track on eh red track had slid below the Unijoiner and I had to pull that joint between the modules apart and re-align.

I call that zero debug time, and that was very satisfying -- no mechanical or electrical issues.

It was less than couple of minutes from when I put the Sprinter on the track until I was playing with DCC -- my first experience -- and figuring out how get the various announcements to play.

I understand that setting up what is essentially a circle of track and having it prove mechanically and electrically reliable is not a huge technical accomplishment or feat.

But because T-TRAK is truly modular -- the only connections to any subsequent modules are the track ends and the PowerPole connectors that connect a new section of power bus -- I have a great deal of confidence that the layout will be remain that reliable.

My 4 year old grandson and his 1½ sister could run the train around and around -- tooting the horn, ringing the bell, turning the headlight on an off -- with no derailaments or dead sections of track -- just steady running. One of my son's high school buddies brought his daughter over, and she was mesmerized -- running the train around and around for probably an hour while we played in the driveway.

No issues.

As you can no doubt tell, I am very pumped up by all this.

I can't wait for my set of double modules to be delivered, so I can run on the red track and the yellow track. :-)

The structure kits are piling up.

This has all been a pretty wonderful experience.


r/TTRAK • • Feb 09 '26

Latest module complete!

Thumbnail
gallery
16 Upvotes

Just finished this module. Looking forward to running it after im sure its all dry.


r/TTRAK • • Feb 05 '26

It's T-TRAK, I promise

Post image
16 Upvotes

My favorite T-TRAK module so far.


r/TTRAK • • 27d ago

N scale N scale switching layout (feedback welcome)

Thumbnail gallery
15 Upvotes

r/TTRAK • • Oct 18 '26

Show me your larger T-trak setups

Post image
15 Upvotes

r/TTRAK • • Oct 06 '26

N scale A Bad Day at Black Rock

Thumbnail
gallery
15 Upvotes

It has been awhile. I have started working on two single modules; hoping for something easier than my first one, “The Charleston, SC Coal Tipple”.

My next is based upon the movie, “A Bad Day at Black Rock”. Awesome movie if you haven’t seen it; if you already have, enjoy it again…

Most of the buildings I found were 3D printed or wood kits; Blair Line and Wildwest Models. Three of the buildings need scratch-building and one is almost done and I’m well on my way with the train station buildings.